power: power_fsl: Pass p->bus in the same way for SPI and I2C cases

There is no need to pass p->bus differently when the PMIC is connected via SPI
or via I2C.

Handle the both cases in the same way.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
index ed778f333e5387d3e85a4544557a8fabfb20962a..ac0b541d797088afc3056e7a4b83e9ee8adb9f6b 100644 (file)
--- a/drivers/power/power_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -36,10 +36,10 @@ int pmic_init(unsigned char bus)
 
        p->name = name;
        p->number_of_regs = PMIC_NUM_OF_REGS;
+       p->bus = bus;
 
 #if defined(CONFIG_POWER_SPI)
        p->interface = PMIC_SPI;
-       p->bus = CONFIG_FSL_PMIC_BUS;
        p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
        p->hw.spi.clk = CONFIG_FSL_PMIC_CLK;
        p->hw.spi.mode = CONFIG_FSL_PMIC_MODE;
@@ -50,7 +50,6 @@ int pmic_init(unsigned char bus)
        p->interface = PMIC_I2C;
        p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
        p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
-       p->bus = bus;
 #else
 #error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
 #endif