ata: merge the header of ata_piix driver

move the sata.h from include/ to drivers/block/ata_piix.h

Signed-off-by: Dave Liu <daveliu@freescale.com>

diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 806ec1a3fcbbc0a050292965e9828dcf5ab8db47..9ba69189a5bbbc0612f4892e74d760c900eaccfc 100644 (file)
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -41,7 +41,7 @@
 
 #define SATA_DECL
 #define DRV_DECL               /*For file specific declarations */
-#include <sata.h>
+#include "ata_piix.h"
 
 /*Macros realted to PCI*/
 #define PCI_SATA_BUS   0x00

diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
new file mode 100644 (file)
index 0000000..bb1acb3
--- /dev/null
+++ b/drivers/block/ata_piix.h
@@ -0,0 +1,92 @@
+
+#if (DEBUG_SATA)
+#define PRINTF(fmt,args...)    printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+struct sata_ioports {
+       unsigned long cmd_addr;
+       unsigned long data_addr;
+       unsigned long error_addr;
+       unsigned long feature_addr;
+       unsigned long nsect_addr;
+       unsigned long lbal_addr;
+       unsigned long lbam_addr;
+       unsigned long lbah_addr;
+       unsigned long device_addr;
+       unsigned long status_addr;
+       unsigned long command_addr;
+       unsigned long altstatus_addr;
+       unsigned long ctl_addr;
+       unsigned long bmdma_addr;
+       unsigned long scr_addr;
+};
+
+struct sata_port {
+       unsigned char port_no;          /* primary=0, secondary=1       */
+       struct sata_ioports ioaddr;     /* ATA cmd/ctl/dma reg blks     */
+       unsigned char ctl_reg;
+       unsigned char last_ctl;
+       unsigned char port_state;       /* 1-port is available and      */
+                                       /* 0-port is not available      */
+       unsigned char dev_mask;
+};
+
+/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/
+#ifdef SATA_DECL               /*SATA library specific declarations */
+#define ata_id_has_lba48(id)    ((id)[83] & (1 << 10))
+#define ata_id_has_lba(id)      ((id)[49] & (1 << 9))
+#define ata_id_has_dma(id)      ((id)[49] & (1 << 8))
+#define ata_id_u32(id,n)        \
+       (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n)        \
+       (((u64) (id)[(n) + 3] << 48) | \
+       ((u64) (id)[(n) + 2] << 32) | \
+       ((u64) (id)[(n) + 1] << 16) | \
+       ((u64) (id)[(n) + 0]) )
+#endif
+
+#ifdef SATA_DECL               /*SATA library specific declarations */
+static inline void
+ata_dump_id (u16 * id)
+{
+       PRINTF ("49==0x%04x  "
+               "53==0x%04x  "
+               "63==0x%04x  "
+               "64==0x%04x  "
+               "75==0x%04x  \n", id[49], id[53], id[63], id[64], id[75]);
+       PRINTF ("80==0x%04x  "
+               "81==0x%04x  "
+               "82==0x%04x  "
+               "83==0x%04x  "
+               "84==0x%04x  \n", id[80], id[81], id[82], id[83], id[84]);
+       PRINTF ("88==0x%04x  " "93==0x%04x\n", id[88], id[93]);
+}
+#endif
+
+#ifdef SATA_DECL               /*SATA library specific declarations */
+int sata_bus_softreset (int num);
+void sata_identify (int num, int dev);
+void sata_port (struct sata_ioports *ioport);
+void set_Feature_cmd (int num, int dev);
+int sata_devchk (struct sata_ioports *ioaddr, int dev);
+void dev_select (struct sata_ioports *ioaddr, int dev);
+u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max);
+u8 sata_chk_status (struct sata_ioports *ioaddr);
+ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer);
+ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer);
+void msleep (int count);
+#endif
+
+/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
+
+#ifdef DRV_DECL                        /*Driver specific declaration */
+int init_sata (void);
+#endif
+
+#ifdef DRV_DECL                        /*Defines Driver Specific variables */
+struct sata_port port[CFG_SATA_MAXBUS];
+block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
+int curr_dev = -1;
+#endif

diff --git a/include/sata.h b/include/sata.h
deleted file mode 100644 (file)
index bb1acb3..0000000
--- a/include/sata.h
+++ /dev/null
@@ -1,92 +0,0 @@
-
-#if (DEBUG_SATA)
-#define PRINTF(fmt,args...)    printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-struct sata_ioports {
-       unsigned long cmd_addr;
-       unsigned long data_addr;
-       unsigned long error_addr;
-       unsigned long feature_addr;
-       unsigned long nsect_addr;
-       unsigned long lbal_addr;
-       unsigned long lbam_addr;
-       unsigned long lbah_addr;
-       unsigned long device_addr;
-       unsigned long status_addr;
-       unsigned long command_addr;
-       unsigned long altstatus_addr;
-       unsigned long ctl_addr;
-       unsigned long bmdma_addr;
-       unsigned long scr_addr;
-};
-
-struct sata_port {
-       unsigned char port_no;          /* primary=0, secondary=1       */
-       struct sata_ioports ioaddr;     /* ATA cmd/ctl/dma reg blks     */
-       unsigned char ctl_reg;
-       unsigned char last_ctl;
-       unsigned char port_state;       /* 1-port is available and      */
-                                       /* 0-port is not available      */
-       unsigned char dev_mask;
-};
-
-/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/
-#ifdef SATA_DECL               /*SATA library specific declarations */
-#define ata_id_has_lba48(id)    ((id)[83] & (1 << 10))
-#define ata_id_has_lba(id)      ((id)[49] & (1 << 9))
-#define ata_id_has_dma(id)      ((id)[49] & (1 << 8))
-#define ata_id_u32(id,n)        \
-       (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
-#define ata_id_u64(id,n)        \
-       (((u64) (id)[(n) + 3] << 48) | \
-       ((u64) (id)[(n) + 2] << 32) | \
-       ((u64) (id)[(n) + 1] << 16) | \
-       ((u64) (id)[(n) + 0]) )
-#endif
-
-#ifdef SATA_DECL               /*SATA library specific declarations */
-static inline void
-ata_dump_id (u16 * id)
-{
-       PRINTF ("49==0x%04x  "
-               "53==0x%04x  "
-               "63==0x%04x  "
-               "64==0x%04x  "
-               "75==0x%04x  \n", id[49], id[53], id[63], id[64], id[75]);
-       PRINTF ("80==0x%04x  "
-               "81==0x%04x  "
-               "82==0x%04x  "
-               "83==0x%04x  "
-               "84==0x%04x  \n", id[80], id[81], id[82], id[83], id[84]);
-       PRINTF ("88==0x%04x  " "93==0x%04x\n", id[88], id[93]);
-}
-#endif
-
-#ifdef SATA_DECL               /*SATA library specific declarations */
-int sata_bus_softreset (int num);
-void sata_identify (int num, int dev);
-void sata_port (struct sata_ioports *ioport);
-void set_Feature_cmd (int num, int dev);
-int sata_devchk (struct sata_ioports *ioaddr, int dev);
-void dev_select (struct sata_ioports *ioaddr, int dev);
-u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max);
-u8 sata_chk_status (struct sata_ioports *ioaddr);
-ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer);
-ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer);
-void msleep (int count);
-#endif
-
-/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
-
-#ifdef DRV_DECL                        /*Driver specific declaration */
-int init_sata (void);
-#endif
-
-#ifdef DRV_DECL                        /*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
-block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
-int curr_dev = -1;
-#endif