#########################################################################
LIST_5xxx=" \
- BC3450 cm1_qp1 cpci5200 EVAL5200 \
+ BC3450 cm5200 cpci5200 EVAL5200 \
fo300 icecube_5100 icecube_5200 lite5200b \
mcc200 mecp5200 motionpro o2dnt \
pf5200 PM520 TB5200 Total5100 \
smmaco4_config: unconfig
@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
-cm1_qp1_config: unconfig
- @ >include/config.h
- @[ -z "$(findstring cm1_qp1,$@)" ] || \
- { echo "... with 64 MByte SDRAM" ; \
- echo "... with 32 MByte Flash" ; \
- }
- @./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1
+cm5200_config: unconfig
+ @./mkconfig -a cm5200 ppc mpc5xxx cm5200
spieval_config: unconfig
@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
+++ /dev/null
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := $(BOARD).o cmd_cm1_qp1.o fwupdate.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004-2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#ifdef CONFIG_OF_FLAT_TREE
-#include <ft_build.h>
-#endif /* CONFIG_OF_FLAT_TREE */
-
-#include "fwupdate.h"
-
-#ifndef CFG_RAMBOOT
-/*
- * Helper function to initialize SDRAM controller.
- */
-static void sdram_start(int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
- hi_addr_bit;
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
- hi_addr_bit;
-
- /* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
- hi_addr_bit;
-
- /* auto refresh, second time */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
- hi_addr_bit;
-
- /* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-
- /* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-}
-#endif /* CFG_RAMBOOT */
-
-/*
- * Initalize SDRAM - configure SDRAM controller, detect memory size.
- */
-long int initdram(int board_type)
-{
- ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
- ulong test1, test2;
-
- /* configure SDRAM start/end for detection */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else
- dramsize = test2;
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20))
- dramsize = 0;
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
- __builtin_ffs(dramsize >> 20) - 1;
- } else
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-#else /* CFG_RAMBOOT */
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
- if (dramsize >= 0x13)
- dramsize = (1 << (dramsize - 0x13)) << 20;
- else
- dramsize = 0;
-#endif /* CFG_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
- * the MPC5200B User's Manual.
- */
- *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
- __asm__ volatile ("sync");
-
- return dramsize;
-}
-
-
-int checkboard(void)
-{
- puts("Board: CM1.QP1\n");
- return 0;
-}
-
-
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable flash write access for detection
- * process. Note that CS_BOOT cannot be cleared when executing in
- * flash.
- */
- *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
- return 0;
-}
-
-
-#ifdef CONFIG_POST
-int post_hotkeys_pressed(void)
-{
- return 0;
-}
-#endif /* CONFIG_POST */
-
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
- vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
- *save_addr = a;
-}
-
-
-ulong post_word_load(void)
-{
- vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
- return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
-
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
- uchar buf[6];
- char str[18];
-
- /* Read ethaddr from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
- sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- /* Check if MAC addr is owned by Schindler */
- if (strstr(str, "00:06:C3") != str) {
- printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
- " in EEPROM.\n", str);
- printf(LOG_PREFIX "Using MAC from environment\n");
- } else {
- printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
- str);
- setenv("ethaddr", str);
- }
- } else {
- printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
- " device at address %02X:%04X\n", CFG_I2C_EEPROM,
- CONFIG_MAC_OFFSET);
- printf(LOG_PREFIX "Using MAC from environment\n");
- }
- return 0;
-#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-
-#ifdef CONFIG_LAST_STAGE_INIT
-int last_stage_init(void)
-{
-#ifdef CONFIG_USB_STORAGE
- cm1_fwupdate();
-#endif /* CONFIG_USB_STORAGE */
- return 0;
-}
-#endif /* CONFIG_LAST_STAGE_INIT */
-
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-}
-#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
+++ /dev/null
-/*
- * (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <usb.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-
-int do_i2c(char *argv[])
-{
- unsigned char temp, temp1;
-
- printf("Starting I2C Test\n"
- "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
- "Please press any key to start\n\n");
- getc();
-
- temp = 0xf0; /* set io 0-4 as output */
- i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
-
- printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
- "Press any key to stop\n\n");
-
- while (!tstc()) {
- i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
- temp1 = (temp >> 4) & 0x03;
- temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
- temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
- temp = temp1;
- i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
- }
- getc();
-
- return 0;
-}
-
-int do_usbtest(char *argv[])
-{
- int i;
- static int usb_stor_curr_dev = -1; /* current device */
-
- printf("Starting USB Test\n"
- "Please insert USB Memmory Stick\n\n"
- "Please press any key to start\n\n");
- getc();
-
- usb_stop();
- printf("(Re)start USB...\n");
- i = usb_init();
-#ifdef CONFIG_USB_STORAGE
- /* try to recognize storage devices immediately */
- if (i >= 0)
- usb_stor_curr_dev = usb_stor_scan(1);
-#endif /* CONFIG_USB_STORAGE */
- if (usb_stor_curr_dev >= 0)
- printf("Found USB Storage Dev continue with Test...\n");
- else {
- printf("No USB Storage Device detected.. Stop Test\n");
- return 1;
- }
-
- usb_stor_info();
-
- printf("stopping USB..\n");
- usb_stop();
-
- return 0;
-}
-
-int do_led(char *argv[])
-{
- int i = 0;
- struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
-
- printf("Starting LED Test\n"
- "Please set Switch S500 all off\n\n"
- "Please press any key to start\n\n");
- getc();
-
- /* configure timer 2-3 for simple GPIO output High */
- gpt->gpt2.emsr |= 0x00000034;
- gpt->gpt3.emsr |= 0x00000034;
-
- (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000;
- (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000;
- printf("Please press any key to stop\n\n");
- while (!tstc()) {
- if (i == 1) {
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
- gpt->gpt2.emsr &= ~0x00000010;
- gpt->gpt3.emsr &= ~0x00000010;
- } else if (i == 2) {
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
- gpt->gpt2.emsr &= ~0x00000010;
- gpt->gpt3.emsr |= 0x00000010;
- } else if (i >= 3) {
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
- gpt->gpt3.emsr &= ~0x00000010;
- gpt->gpt2.emsr |= 0x00000010;
- i = 0;
- }
- i++;
- udelay(200000);
- }
- getc();
-
- (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
- gpt->gpt2.emsr |= 0x00000010;
- gpt->gpt3.emsr |= 0x00000010;
-
- return 0;
-}
-
-int do_rs232(char *argv[])
-{
- int error_status = 0;
- struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
-
- /* Configure PSC 2-3-6 as GPIO */
- gpio->port_config &= 0xFF0FF80F;
-
- switch (simple_strtoul(argv[2], NULL, 10)) {
- case 1:
- /* check RTS <-> CTS loop */
- /* set rts to 0 */
- printf("Uart 1 test: RX TX tested by using U-Boot\n"
- "Please connect RTS with CTS on Uart1 plug\n\n"
- "Press any key to start\n\n");
- getc();
-
- psc1->op1 |= 0x01;
-
- /* wait some time before requesting status */
- udelay(10);
-
- /* check status at cts */
- if ((psc1->ip & 0x01) != 0) {
- error_status = 3;
- printf("%s: failure at rs232_1, cts status is %d "
- "(should be 0)\n",
- __FUNCTION__, (psc1->ip & 0x01));
- }
-
- /* set rts to 1 */
- psc1->op0 |= 0x01;
-
- /* wait some time before requesting status */
- udelay(10);
-
- /* check status at cts */
- if ((psc1->ip & 0x01) != 1) {
- error_status = 3;
- printf("%s: failure at rs232_1, cts status is %d "
- "(should be 1)\n",
- __FUNCTION__, (psc1->ip & 0x01));
- }
- break;
- case 2:
- /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */
- printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n"
- "\nPress any key to start\n\n");
- getc();
-
- gpio->simple_gpioe &= ~(0x000000F0);
- gpio->simple_gpioe |= 0x000000F0;
- gpio->simple_ddr &= ~(0x000000F0);
- gpio->simple_ddr |= 0x00000050;
-
- /* check TXD <-> RXD loop */
- /* set TXD to 1 */
- gpio->simple_dvo |= (1 << 4);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000020) != 0x00000020) {
- error_status = 2;
- printf("%s: failure at rs232_2, rxd status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000020) >> 5);
- }
-
- /* set TXD to 0 */
- gpio->simple_dvo &= ~(1 << 4);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000020) != 0x00000000) {
- error_status = 2;
- printf("%s: failure at rs232_2, rxd status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000020) >> 5);
- }
-
- /* check RTS <-> CTS loop */
- /* set RTS to 1 */
- gpio->simple_dvo |= (1 << 6);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000080) != 0x00000080) {
- error_status = 3;
- printf("%s: failure at rs232_2, cts status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000080) >> 7);
- }
-
- /* set RTS to 0 */
- gpio->simple_dvo &= ~(1 << 6);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000080) != 0x00000000) {
- error_status = 3;
- printf("%s: failure at rs232_2, cts status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000080) >> 7);
- }
- break;
- case 3:
- /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */
- printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n"
- "\nPress any key to start\n\n");
- getc();
-
- gpio->simple_gpioe &= ~(0x00000F00);
- gpio->simple_gpioe |= 0x00000F00;
-
- gpio->simple_ddr &= ~(0x00000F00);
- gpio->simple_ddr |= 0x00000500;
-
- /* check TXD <-> RXD loop */
- /* set TXD to 1 */
- gpio->simple_dvo |= (1 << 8);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000200) != 0x00000200) {
- error_status = 2;
- printf("%s: failure at rs232_3, rxd status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000200) >> 9);
- }
-
- /* set TXD to 0 */
- gpio->simple_dvo &= ~(1 << 8);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000200) != 0x00000000) {
- error_status = 2;
- printf("%s: failure at rs232_3, rxd status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000200) >> 9);
- }
-
- /* check RTS <-> CTS loop */
- /* set RTS to 1 */
- gpio->simple_dvo |= (1 << 10);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000800) != 0x00000800) {
- error_status = 3;
- printf("%s: failure at rs232_3, cts status is %d "
- "(should be 1)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000800) >> 11);
- }
-
- /* set RTS to 0 */
- gpio->simple_dvo &= ~(1 << 10);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if ((gpio->simple_ival & 0x00000800) != 0x00000000) {
- error_status = 3;
- printf("%s: failure at rs232_3, cts status is %d "
- "(should be 0)\n", __FUNCTION__,
- (gpio->simple_ival & 0x00000800) >> 11);
- }
- break;
- case 4:
- /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */
- printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n"
- "\nPress any key to start\n\n");
- getc();
-
- gpio->simple_gpioe &= ~(0xF0000000);
- gpio->simple_gpioe |= 0x30000000;
-
- gpio->simple_ddr &= ~(0xf0000000);
- gpio->simple_ddr |= 0x30000000;
-
- (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000;
- (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000);
-
- /* check TXD <-> RXD loop */
- /* set TXD to 1 */
- gpio->simple_dvo |= (1 << 28);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
- 0x10000000) {
- error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %d "
- "(should be 1)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x10000000) >> 28);
- }
-
- /* set TXD to 0 */
- gpio->simple_dvo &= ~(1 << 28);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
- 0x00000000) {
- error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %d "
- "(should be 0)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x10000000) >> 28);
- }
-
- /* check RTS <-> CTS loop */
- /* set RTS to 1 */
- gpio->simple_dvo |= (1 << 29);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
- 0x20000000) {
- error_status = 3;
- printf("%s: failure at rs232_4, cts status is %d "
- "(should be 1)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x20000000) >> 29);
- }
-
- /* set RTS to 0 */
- gpio->simple_dvo &= ~(1 << 29);
-
- /* wait some time before requesting status */
- udelay(10);
-
- if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
- 0x00000000) {
- error_status = 3;
- printf("%s: failure at rs232_4, cts status is %d "
- "(should be 0)\n", __FUNCTION__,
- ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
- 0x20000000) >> 29);
- }
- break;
- default:
- printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]);
- error_status = 1;
- break;
- }
- gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
-
- return error_status;
-}
-
-int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int rcode = -1;
-
- switch (argc) {
- case 2:
- if (strncmp(argv[1], "i2c", 3) == 0)
- rcode = do_i2c(argv);
- else if (strncmp(argv[1], "led", 3) == 0)
- rcode = do_led(argv);
- else if (strncmp(argv[1], "usb", 3) == 0)
- rcode = do_usbtest(argv);
- break;
- case 3:
- if (strncmp(argv[1], "rs232", 3) == 0)
- rcode = do_rs232(argv);
- break;
- }
-
- switch (rcode) {
- case -1:
- printf("Usage:\n"
- "fkt { i2c | led | usb }\n"
- "fkt rs232 number\n");
- rcode = 1;
- break;
- case 0:
- printf("Test passed\n");
- break;
- default:
- printf("Test failed with code: %d\n", rcode);
- }
-
- return rcode;
-}
-
-U_BOOT_CMD(
- fkt, 4, 1, cmd_fkt,
- "fkt - Function test routines\n",
- "i2c\n"
- " - Test I2C communication\n"
- "fkt led\n"
- " - Test LEDs\n"
- "fkt rs232 number\n"
- " - Test RS232 (loopback plug(s) for RS232 required)\n"
- "fkt usb\n"
- " - Test USB communication\n"
-);
-#endif /* CFG_CMD_BSP */
+++ /dev/null
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0xfc000000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+++ /dev/null
-/*
- * (C) Copyright 2007 Schindler Lift Inc.
- * (C) Copyright 2007 Semihalf
- *
- * Author: Michel Marti <mma@objectxp.com>
- * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>:
- * - code clean-up
- * - bugfix for overwriting bootargs by user
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <image.h>
-#include <usb.h>
-#include <fat.h>
-
-#include "fwupdate.h"
-
-extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
-extern long do_fat_read(const char *, void *, unsigned long, int);
-extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]);
-
-static int load_rescue_image(ulong);
-
-void cm1_fwupdate(void)
-{
- cmd_tbl_t *bcmd;
- char *rsargs;
- char *tmp = NULL;
- char ka[16];
- char *argv[3] = { "bootm", ka, NULL };
-
- /* Check if rescue system is disabled... */
- if (getenv("norescue")) {
- printf(LOG_PREFIX "Rescue System disabled.\n");
- return;
- }
-
- /* Check if we have a USB storage device and load image */
- if (load_rescue_image(LOAD_ADDR))
- return;
-
- bcmd = find_cmd("bootm");
- if (!bcmd)
- return;
-
- sprintf(ka, "%lx", LOAD_ADDR);
-
- /* prepare our bootargs */
- rsargs = getenv("rs-args");
- if (!rsargs)
- rsargs = RS_BOOTARGS;
- else {
- tmp = malloc(strlen(rsargs+1));
- if (!tmp) {
- printf(LOG_PREFIX "Memory allocation failed\n");
- return;
- }
- strcpy(tmp, rsargs);
- rsargs = tmp;
- }
-
- setenv("bootargs", rsargs);
-
- if (rsargs == tmp)
- free(rsargs);
-
- printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs);
- do_bootm(bcmd, 0, 2, argv);
-}
-
-static int load_rescue_image(ulong addr)
-{
- disk_partition_t info;
- int devno;
- int partno;
- int i;
- char fwdir[64];
- char nxri[128];
- char *tmp;
- char dev[7];
- char addr_str[16];
- char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL };
- block_dev_desc_t *stor_dev = NULL;
- cmd_tbl_t *bcmd;
-
- /* Get name of firmware directory */
- tmp = getenv("fw-dir");
-
- /* Copy it into fwdir */
- strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir));
- fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */
-
- printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB"
- " storage...\n", fwdir);
- usb_stop();
- if (usb_init() != 0)
- return 1;
-
- /* Check for storage device */
- if (usb_stor_scan(1) != 0) {
- usb_stop();
- return 1;
- }
-
- /* Detect storage device */
- for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) {
- stor_dev = usb_stor_get_dev(devno);
- if (stor_dev->type != DEV_TYPE_UNKNOWN)
- break;
- }
- if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) {
- printf(LOG_PREFIX "No valid storage device found...\n");
- usb_stop();
- return 1;
- }
-
- /* Detect partition */
- for (partno = -1, i = 0; i < 6; i++) {
- if (get_partition_info(stor_dev, i, &info) == 0) {
- if (fat_register_device(stor_dev, i) == 0) {
- /* Check if rescue image is present */
- FW_DEBUG("Looking for firmware directory '%s'"
- " on partition %d\n", fwdir, i);
- if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) {
- FW_DEBUG("No NX rescue image on "
- "partition %d.\n", i);
- } else {
- partno = i;
- FW_DEBUG("Partition %d contains "
- "firmware directory\n", partno);
- break;
- }
- }
- }
- }
-
- if (partno == -1) {
- printf(LOG_PREFIX "Error: No valid (FAT) partition detected\n");
- usb_stop();
- return 1;
- }
-
- /* Load the rescue image */
- bcmd = find_cmd("fatload");
- if (!bcmd) {
- printf(LOG_PREFIX "Error - 'fatload' command not present.\n");
- usb_stop();
- return 1;
- }
-
- tmp = getenv("nx-rescue-image");
- sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE);
- sprintf(dev, "%d:%d", devno, partno);
- sprintf(addr_str, "%lx", addr);
-
- FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n",
- dev, addr_str, nxri);
-
- if (do_fat_fsload(bcmd, 0, 5, argv) != 0) {
- usb_stop();
- return 1;
- }
-
- /* Stop USB */
- usb_stop();
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2007 Schindler Lift Inc.
- *
- * Author: Michel Marti <mma@objectxp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __FW_UPDATE_H
-#define __FW_UPDATE_H
-
-/* Default prefix for output messages */
-#define LOG_PREFIX "CM1: "
-
-/* Extra debug macro */
-#ifdef CONFIG_FWUPDATE_DEBUG
-#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt)
-#else
-#define FW_DEBUG(fmt...)
-#endif
-
-/* Name of the directory holding firmware images */
-#define FW_DIR "nx-fw"
-#define RESCUE_IMAGE "nxrs.img"
-#define LOAD_ADDR 0x400000
-#define RS_BOOTARGS "ramdisk=8192K"
-
-/* Main function for fwupdate */
-void cm1_fwupdate(void);
-
-#endif /* __FW_UPDATE_H */
+++ /dev/null
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc5xxx/start.o (.text)
- *(.text)
- *(.fixup)
- *(.got1)
- . = ALIGN(16);
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
--- /dev/null
+#
+# (C) Copyright 2003-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o cmd_cm5200.o fwupdate.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * Adapted to U-Boot 1.2 by:
+ * Bartlomiej Sieka <tur@semihalf.com>:
+ * - HW ID readout from EEPROM
+ * - module detection
+ * Grzegorz Bernacki <gjb@semihalf.com>:
+ * - run-time SDRAM controller configuration
+ * - LIBFDT support
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <linux/ctype.h>
+
+#ifdef CONFIG_OF_LIBFDT
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif /* CONFIG_OF_LIBFDT */
+
+
+#include "cm5200.h"
+#include "fwupdate.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static hw_id_t hw_id;
+
+
+#ifndef CFG_RAMBOOT
+/*
+ * Helper function to initialize SDRAM controller.
+ */
+static void sdram_start(int hi_addr, mem_conf_t *mem_conf)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000000 |
+ hi_addr_bit;
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000002 |
+ hi_addr_bit;
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 |
+ hi_addr_bit;
+
+ /* auto refresh, second time */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 |
+ hi_addr_bit;
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = mem_conf->mode;
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit;
+}
+#endif /* CFG_RAMBOOT */
+
+
+/*
+ * Retrieve memory configuration for a given module. board_type is the index
+ * in hw_id_list[] corresponding to the module we are executing on; we return
+ * SDRAM controller settings approprate for this module.
+ */
+static mem_conf_t* get_mem_config(int board_type)
+{
+ switch(board_type){
+ case CM1_QA:
+ return memory_config[0];
+ case CM11_QA:
+ case CMU1_QA:
+ return memory_config[1];
+ default:
+ printf("ERROR: Unknown module, using a default SDRAM "
+ "configuration - things may not work!!!.\n");
+ return memory_config[0];
+ }
+}
+
+
+/*
+ * Initalize SDRAM - configure SDRAM controller, detect memory size.
+ */
+long int initdram(int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+ mem_conf_t *mem_conf;
+
+ mem_conf = get_mem_config(board_type);
+
+ /* configure SDRAM start/end for detection */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = mem_conf->config1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2;
+
+ sdram_start(0, mem_conf);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1, mem_conf);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0, mem_conf);
+ dramsize = test1;
+ } else
+ dramsize = test2;
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1;
+ } else
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+#else /* CFG_RAMBOOT */
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13)
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ else
+ dramsize = 0;
+#endif /* !CFG_RAMBOOT */
+
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
+ * the MPC5200B User's Manual.
+ */
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+
+ return dramsize;
+}
+
+
+/*
+ * Read module hardware identification data from the I2C EEPROM.
+ */
+static void read_hw_id(hw_id_t hw_id)
+{
+ int i;
+ for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
+ if (i2c_read(CFG_I2C_EEPROM,
+ hw_id_format[i].offset,
+ 2,
+ (uchar *)&hw_id[i][0],
+ hw_id_format[i].length) != 0)
+ printf("ERROR: can't read HW ID from EEPROM\n");
+}
+
+
+/*
+ * Identify module we are running on, set gd->board_type to the index in
+ * hw_id_list[] corresponding to the module identifed, or to
+ * CM5200_UNKNOWN_MODULE if we can't identify the module.
+ */
+static void identify_module(hw_id_t hw_id)
+{
+ int i, j, element;
+ char match;
+ gd->board_type = CM5200_UNKNOWN_MODULE;
+ for (i = 0; i < sizeof (hw_id_list) / sizeof (char **); ++i) {
+ match = 1;
+ for (j = 0; j < sizeof (hw_id_identify) / sizeof (int); ++j) {
+ element = hw_id_identify[j];
+ if (strncmp(hw_id_list[i][element],
+ &hw_id[element][0],
+ hw_id_format[element].length) != 0) {
+ match = 0;
+ break;
+ }
+ }
+ if (match) {
+ gd->board_type = i;
+ break;
+ }
+ }
+}
+
+
+/*
+ * Compose string with module name.
+ * buf is assumed to have enough space, and be null-terminated.
+ */
+static void compose_module_name(hw_id_t hw_id, char *buf)
+{
+ char tmp[MODULE_NAME_MAXLEN];
+ strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length);
+ strncat(buf, ".", 1);
+ strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length);
+ strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length);
+ strncat(buf, " (", 2);
+ strncat(buf, &hw_id[IDENTIFICATION_NUMBER][0],
+ hw_id_format[IDENTIFICATION_NUMBER].length);
+ sprintf(tmp, " / %u.%u)",
+ hw_id[MAJOR_SW_VERSION][0],
+ hw_id[MINOR_SW_VERSION][0]);
+ strcat(buf, tmp);
+}
+
+
+/*
+ * Compose string with hostname.
+ * buf is assumed to have enough space, and be null-terminated.
+ */
+static void compose_hostname(hw_id_t hw_id, char *buf)
+{
+ char *p;
+ strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length);
+ strncat(buf, "_", 1);
+ strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length);
+ strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length);
+ for (p = buf; *p; ++p)
+ *p = tolower(*p);
+
+}
+
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * Update 'model' and 'memory' properties in the blob according to the module
+ * that we are running on.
+ */
+static void ft_blob_update(void *blob, bd_t *bd)
+{
+ int len, ret, nodeoffset = 0;
+ char module_name[MODULE_NAME_MAXLEN] = {0};
+ ulong memory_data[2] = {0};
+
+ compose_module_name(hw_id, module_name);
+ len = strlen(module_name) + 1;
+
+ ret = fdt_setprop(blob, nodeoffset, "model", module_name, len);
+ if (ret < 0)
+ printf("ft_blob_update(): cannot set /model property err:%s\n",
+ fdt_strerror(ret));
+
+ memory_data[0] = cpu_to_be32(bd->bi_memstart);
+ memory_data[1] = cpu_to_be32(bd->bi_memsize);
+
+ nodeoffset = fdt_find_node_by_path (blob, "/memory");
+ if (nodeoffset >= 0) {
+ ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
+ sizeof(memory_data));
+ if (ret < 0)
+ printf("ft_blob_update): cannot set /memory/reg "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+ else {
+ /* memory node is required in dts */
+ printf("ft_blob_update(): cannot find /memory node "
+ "err:%s\n", fdt_strerror(nodeoffset));
+ }
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+
+
+/*
+ * Read HW ID from I2C EEPROM and detect the modue we are running on. Note
+ * that we need to use local variable for readout, because global data is not
+ * writable yet (and we'll have to redo the readout later on).
+ */
+int checkboard(void)
+{
+ hw_id_t hw_id_tmp;
+ char module_name_tmp[MODULE_NAME_MAXLEN] = "";
+
+ /*
+ * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
+ * here despite the fact that it will be called again later on. We
+ * also use a little trick to silence I2C-related output.
+ */
+ gd->flags |= GD_FLG_SILENT;
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ gd->flags &= ~GD_FLG_SILENT;
+
+ read_hw_id(hw_id_tmp);
+ identify_module(hw_id_tmp); /* this sets gd->board_type */
+ compose_module_name(hw_id_tmp, module_name_tmp);
+
+ if (gd->board_type != CM5200_UNKNOWN_MODULE)
+ printf("Board: %s\n", module_name_tmp);
+ else
+ printf("Board: unrecognized cm5200 module (%s)\n",
+ module_name_tmp);
+
+ return 0;
+}
+
+
+int board_early_init_r(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write access for detection
+ * process. Note that CS_BOOT cannot be cleared when executing in
+ * flash.
+ */
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+
+ /* Now that we can write to global data, read HW ID again. */
+ read_hw_id(hw_id);
+ return 0;
+}
+
+
+#ifdef CONFIG_POST
+int post_hotkeys_pressed(void)
+{
+ return 0;
+}
+#endif /* CONFIG_POST */
+
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+void post_word_store(ulong a)
+{
+ vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+ *save_addr = a;
+}
+
+
+ulong post_word_load(void)
+{
+ vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+ return *save_addr;
+}
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
+
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+ uchar buf[6];
+ char str[18];
+ char hostname[MODULE_NAME_MAXLEN];
+
+ /* Read ethaddr from EEPROM */
+ if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+ sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ /* Check if MAC addr is owned by Schindler */
+ if (strstr(str, "00:06:C3") != str)
+ printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
+ " in EEPROM.\n", str);
+ else {
+ printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
+ str);
+ setenv("ethaddr", str);
+ }
+ } else {
+ printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
+ " device at address %02X:%04X\n", CFG_I2C_EEPROM,
+ CONFIG_MAC_OFFSET);
+ }
+#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
+ if (!getenv("ethaddr"))
+ printf(LOG_PREFIX "MAC address not set, networking is not "
+ "operational\n");
+
+ /* set the hostname appropriate to the module we're running on */
+ compose_hostname(hw_id, hostname);
+ setenv("hostname", hostname);
+
+ return 0;
+}
+#endif /* CONFIG_MISC_INIT_R */
+
+
+#ifdef CONFIG_LAST_STAGE_INIT
+int last_stage_init(void)
+{
+#ifdef CONFIG_USB_STORAGE
+ cm5200_fwupdate();
+#endif /* CONFIG_USB_STORAGE */
+ return 0;
+}
+#endif /* CONFIG_LAST_STAGE_INIT */
+
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ ft_blob_update(blob, bd);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
--- /dev/null
+/*
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * Author: Bartlomiej Sieka <tur@semihalf.com>
+ * Author: Grzegorz Bernacki <gjb@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CM5200_H
+#define _CM5200_H
+
+
+/*
+ * Definitions and declarations for the modules of the cm5200 platform. Mostly
+ * related to reading the hardware identification data (HW ID) from the I2C
+ * EEPROM, detection of the particular module we are executing on, and
+ * appropriate SDRAM controller initialization.
+ */
+
+
+#define CM5200_UNKNOWN_MODULE 0xffffffff
+
+enum {
+ DEVICE_NAME, /* 0 */
+ GENERATION, /* 1 */
+ PCB_NAME, /* 2 */
+ FORM, /* 3 */
+ VERSION, /* 4 */
+ IDENTIFICATION_NUMBER, /* 5 */
+ MAJOR_SW_VERSION, /* 6 */
+ MINOR_SW_VERSION, /* 7 */
+ /* add new alements above this line */
+ HW_ID_ELEM_COUNT /* count */
+};
+
+/*
+ * Sect. 4.1 "CM1.Q/CMU1.Q Supervisory Microcontroller Interface Definition"
+ */
+
+#define DEVICE_NAME_OFFSET 0x02
+#define GENERATION_OFFSET 0x0b
+#define PCB_NAME_OFFSET 0x0c
+#define FORM_OFFSET 0x15
+#define VERSION_OFFSET 0x16
+#define IDENTIFICATION_NUMBER_OFFSET 0x19
+#define MAJOR_SW_VERSION_OFFSET 0x0480
+#define MINOR_SW_VERSION_OFFSET 0x0481
+
+
+#define DEVICE_NAME_LEN 0x09
+#define GENERATION_LEN 0x01
+#define PCB_NAME_LEN 0x09
+#define FORM_LEN 0x01
+#define VERSION_LEN 0x03
+#define IDENTIFICATION_NUMBER_LEN 0x09
+#define MAJOR_SW_VERSION_LEN 0x01
+#define MINOR_SW_VERSION_LEN 0x01
+
+#define HW_ID_ELEM_MAXLEN 0x09 /* MAX(XXX_LEN) */
+
+/* entire HW ID in EEPROM is 64 bytes, so longer module name is unlikely */
+#define MODULE_NAME_MAXLEN 64
+
+
+/* storage for HW ID read from EEPROM */
+typedef char hw_id_t[HW_ID_ELEM_COUNT][HW_ID_ELEM_MAXLEN];
+
+
+/* HW ID layout in EEPROM */
+static struct {
+ unsigned int offset;
+ unsigned int length;
+} hw_id_format[HW_ID_ELEM_COUNT] = {
+ {DEVICE_NAME_OFFSET, DEVICE_NAME_LEN},
+ {GENERATION_OFFSET, GENERATION_LEN},
+ {PCB_NAME_OFFSET, PCB_NAME_LEN},
+ {FORM_OFFSET, FORM_LEN},
+ {VERSION_OFFSET, VERSION_LEN},
+ {IDENTIFICATION_NUMBER_OFFSET, IDENTIFICATION_NUMBER_LEN},
+ {MAJOR_SW_VERSION_OFFSET, MAJOR_SW_VERSION_LEN},
+ {MINOR_SW_VERSION_OFFSET, MINOR_SW_VERSION_LEN},
+};
+
+
+/* HW ID data found in EEPROM on supported modules */
+static char *cm1_qa_hw_id[HW_ID_ELEM_COUNT] = {
+ "CM", /* DEVICE_NAME */
+ "1", /* GENERATION */
+ "CM1", /* PCB_NAME */
+ "Q", /* FORM */
+ "A", /* VERSION */
+ "591881", /* IDENTIFICATION_NUMBER */
+ "", /* MAJOR_SW_VERSION */
+ "", /* MINOR_SW_VERSION */
+};
+
+static char *cm11_qa_hw_id[HW_ID_ELEM_COUNT] = {
+ "CM", /* DEVICE_NAME */
+ "1", /* GENERATION */
+ "CM11", /* PCB_NAME */
+ "Q", /* FORM */
+ "A", /* VERSION */
+ "594200", /* IDENTIFICATION_NUMBER */
+ "", /* MAJOR_SW_VERSION */
+ "", /* MINOR_SW_VERSION */
+};
+
+static char *cmu1_qa_hw_id[HW_ID_ELEM_COUNT] = {
+ "CMU", /* DEVICE_NAME */
+ "1", /* GENERATION */
+ "CMU1", /* PCB_NAME */
+ "Q", /* FORM */
+ "A", /* VERSION */
+ "594128", /* IDENTIFICATION_NUMBER */
+ "", /* MAJOR_SW_VERSION */
+ "", /* MINOR_SW_VERSION */
+};
+
+
+/* list of known modules */
+static char **hw_id_list[] = {
+ cm1_qa_hw_id,
+ cm11_qa_hw_id,
+ cmu1_qa_hw_id,
+};
+
+/* indices to the above list - keep in sync */
+enum {
+ CM1_QA,
+ CM11_QA,
+ CMU1_QA,
+};
+
+
+/* identify modules based on these hw id elements */
+static int hw_id_identify[] = {
+ PCB_NAME,
+ FORM,
+ VERSION,
+};
+
+
+/* Registers' settings for SDRAM controller intialization */
+typedef struct {
+ ulong mode;
+ ulong control;
+ ulong config1;
+ ulong config2;
+} mem_conf_t;
+
+static mem_conf_t k4s561632E = {
+ 0x00CD0000, /* CASL 3, burst length 8 */
+ 0x514F0000,
+ 0xE2333900,
+ 0x8EE70000
+};
+
+static mem_conf_t mt48lc32m16a2 = {
+ 0x00CD0000, /* CASL 3, burst length 8 */
+ 0x514F0000,
+ 0xD2322800,
+ 0x8AD70000
+};
+
+static mem_conf_t* memory_config[] = {
+ &k4s561632E,
+ &mt48lc32m16a2
+};
+
+#endif /* _CM5200_H */
--- /dev/null
+/*
+ * (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
+ *
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <usb.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+int do_i2c(char *argv[])
+{
+ unsigned char temp, temp1;
+
+ printf("Starting I2C Test\n"
+ "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
+ "Please press any key to start\n\n");
+ getc();
+
+ temp = 0xf0; /* set io 0-4 as output */
+ i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
+
+ printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
+ "Press any key to stop\n\n");
+
+ while (!tstc()) {
+ i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
+ temp1 = (temp >> 4) & 0x03;
+ temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
+ temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
+ temp = temp1;
+ i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
+ }
+ getc();
+
+ return 0;
+}
+
+int do_usbtest(char *argv[])
+{
+ int i;
+ static int usb_stor_curr_dev = -1; /* current device */
+
+ printf("Starting USB Test\n"
+ "Please insert USB Memmory Stick\n\n"
+ "Please press any key to start\n\n");
+ getc();
+
+ usb_stop();
+ printf("(Re)start USB...\n");
+ i = usb_init();
+#ifdef CONFIG_USB_STORAGE
+ /* try to recognize storage devices immediately */
+ if (i >= 0)
+ usb_stor_curr_dev = usb_stor_scan(1);
+#endif /* CONFIG_USB_STORAGE */
+ if (usb_stor_curr_dev >= 0)
+ printf("Found USB Storage Dev continue with Test...\n");
+ else {
+ printf("No USB Storage Device detected.. Stop Test\n");
+ return 1;
+ }
+
+ usb_stor_info();
+
+ printf("stopping USB..\n");
+ usb_stop();
+
+ return 0;
+}
+
+int do_led(char *argv[])
+{
+ int i = 0;
+ struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+ printf("Starting LED Test\n"
+ "Please set Switch S500 all off\n\n"
+ "Please press any key to start\n\n");
+ getc();
+
+ /* configure timer 2-3 for simple GPIO output High */
+ gpt->gpt2.emsr |= 0x00000034;
+ gpt->gpt3.emsr |= 0x00000034;
+
+ (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000;
+ (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000;
+ printf("Please press any key to stop\n\n");
+ while (!tstc()) {
+ if (i == 1) {
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
+ gpt->gpt2.emsr &= ~0x00000010;
+ gpt->gpt3.emsr &= ~0x00000010;
+ } else if (i == 2) {
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
+ gpt->gpt2.emsr &= ~0x00000010;
+ gpt->gpt3.emsr |= 0x00000010;
+ } else if (i >= 3) {
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
+ gpt->gpt3.emsr &= ~0x00000010;
+ gpt->gpt2.emsr |= 0x00000010;
+ i = 0;
+ }
+ i++;
+ udelay(200000);
+ }
+ getc();
+
+ (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
+ gpt->gpt2.emsr |= 0x00000010;
+ gpt->gpt3.emsr |= 0x00000010;
+
+ return 0;
+}
+
+int do_rs232(char *argv[])
+{
+ int error_status = 0;
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+ struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
+
+ /* Configure PSC 2-3-6 as GPIO */
+ gpio->port_config &= 0xFF0FF80F;
+
+ switch (simple_strtoul(argv[2], NULL, 10)) {
+ case 1:
+ /* check RTS <-> CTS loop */
+ /* set rts to 0 */
+ printf("Uart 1 test: RX TX tested by using U-Boot\n"
+ "Please connect RTS with CTS on Uart1 plug\n\n"
+ "Press any key to start\n\n");
+ getc();
+
+ psc1->op1 |= 0x01;
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ /* check status at cts */
+ if ((psc1->ip & 0x01) != 0) {
+ error_status = 3;
+ printf("%s: failure at rs232_1, cts status is %d "
+ "(should be 0)\n",
+ __FUNCTION__, (psc1->ip & 0x01));
+ }
+
+ /* set rts to 1 */
+ psc1->op0 |= 0x01;
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ /* check status at cts */
+ if ((psc1->ip & 0x01) != 1) {
+ error_status = 3;
+ printf("%s: failure at rs232_1, cts status is %d "
+ "(should be 1)\n",
+ __FUNCTION__, (psc1->ip & 0x01));
+ }
+ break;
+ case 2:
+ /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */
+ printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n"
+ "\nPress any key to start\n\n");
+ getc();
+
+ gpio->simple_gpioe &= ~(0x000000F0);
+ gpio->simple_gpioe |= 0x000000F0;
+ gpio->simple_ddr &= ~(0x000000F0);
+ gpio->simple_ddr |= 0x00000050;
+
+ /* check TXD <-> RXD loop */
+ /* set TXD to 1 */
+ gpio->simple_dvo |= (1 << 4);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000020) != 0x00000020) {
+ error_status = 2;
+ printf("%s: failure at rs232_2, rxd status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000020) >> 5);
+ }
+
+ /* set TXD to 0 */
+ gpio->simple_dvo &= ~(1 << 4);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000020) != 0x00000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_2, rxd status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000020) >> 5);
+ }
+
+ /* check RTS <-> CTS loop */
+ /* set RTS to 1 */
+ gpio->simple_dvo |= (1 << 6);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000080) != 0x00000080) {
+ error_status = 3;
+ printf("%s: failure at rs232_2, cts status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000080) >> 7);
+ }
+
+ /* set RTS to 0 */
+ gpio->simple_dvo &= ~(1 << 6);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000080) != 0x00000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_2, cts status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000080) >> 7);
+ }
+ break;
+ case 3:
+ /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */
+ printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n"
+ "\nPress any key to start\n\n");
+ getc();
+
+ gpio->simple_gpioe &= ~(0x00000F00);
+ gpio->simple_gpioe |= 0x00000F00;
+
+ gpio->simple_ddr &= ~(0x00000F00);
+ gpio->simple_ddr |= 0x00000500;
+
+ /* check TXD <-> RXD loop */
+ /* set TXD to 1 */
+ gpio->simple_dvo |= (1 << 8);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000200) != 0x00000200) {
+ error_status = 2;
+ printf("%s: failure at rs232_3, rxd status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000200) >> 9);
+ }
+
+ /* set TXD to 0 */
+ gpio->simple_dvo &= ~(1 << 8);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000200) != 0x00000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_3, rxd status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000200) >> 9);
+ }
+
+ /* check RTS <-> CTS loop */
+ /* set RTS to 1 */
+ gpio->simple_dvo |= (1 << 10);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000800) != 0x00000800) {
+ error_status = 3;
+ printf("%s: failure at rs232_3, cts status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000800) >> 11);
+ }
+
+ /* set RTS to 0 */
+ gpio->simple_dvo &= ~(1 << 10);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if ((gpio->simple_ival & 0x00000800) != 0x00000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_3, cts status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ (gpio->simple_ival & 0x00000800) >> 11);
+ }
+ break;
+ case 4:
+ /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */
+ printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n"
+ "\nPress any key to start\n\n");
+ getc();
+
+ gpio->simple_gpioe &= ~(0xF0000000);
+ gpio->simple_gpioe |= 0x30000000;
+
+ gpio->simple_ddr &= ~(0xf0000000);
+ gpio->simple_ddr |= 0x30000000;
+
+ (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000;
+ (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000);
+
+ /* check TXD <-> RXD loop */
+ /* set TXD to 1 */
+ gpio->simple_dvo |= (1 << 28);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
+ 0x10000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_4, rxd status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x10000000) >> 28);
+ }
+
+ /* set TXD to 0 */
+ gpio->simple_dvo &= ~(1 << 28);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
+ 0x00000000) {
+ error_status = 2;
+ printf("%s: failure at rs232_4, rxd status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x10000000) >> 28);
+ }
+
+ /* check RTS <-> CTS loop */
+ /* set RTS to 1 */
+ gpio->simple_dvo |= (1 << 29);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
+ 0x20000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_4, cts status is %d "
+ "(should be 1)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x20000000) >> 29);
+ }
+
+ /* set RTS to 0 */
+ gpio->simple_dvo &= ~(1 << 29);
+
+ /* wait some time before requesting status */
+ udelay(10);
+
+ if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
+ 0x00000000) {
+ error_status = 3;
+ printf("%s: failure at rs232_4, cts status is %d "
+ "(should be 0)\n", __FUNCTION__,
+ ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+ 0x20000000) >> 29);
+ }
+ break;
+ default:
+ printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]);
+ error_status = 1;
+ break;
+ }
+ gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+
+ return error_status;
+}
+
+int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int rcode = -1;
+
+ switch (argc) {
+ case 2:
+ if (strncmp(argv[1], "i2c", 3) == 0)
+ rcode = do_i2c(argv);
+ else if (strncmp(argv[1], "led", 3) == 0)
+ rcode = do_led(argv);
+ else if (strncmp(argv[1], "usb", 3) == 0)
+ rcode = do_usbtest(argv);
+ break;
+ case 3:
+ if (strncmp(argv[1], "rs232", 3) == 0)
+ rcode = do_rs232(argv);
+ break;
+ }
+
+ switch (rcode) {
+ case -1:
+ printf("Usage:\n"
+ "fkt { i2c | led | usb }\n"
+ "fkt rs232 number\n");
+ rcode = 1;
+ break;
+ case 0:
+ printf("Test passed\n");
+ break;
+ default:
+ printf("Test failed with code: %d\n", rcode);
+ }
+
+ return rcode;
+}
+
+U_BOOT_CMD(
+ fkt, 4, 1, cmd_fkt,
+ "fkt - Function test routines\n",
+ "i2c\n"
+ " - Test I2C communication\n"
+ "fkt led\n"
+ " - Test LEDs\n"
+ "fkt rs232 number\n"
+ " - Test RS232 (loopback plug(s) for RS232 required)\n"
+ "fkt usb\n"
+ " - Test USB communication\n"
+);
+#endif /* CFG_CMD_BSP */
--- /dev/null
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xfc000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>:
+ * - code clean-up
+ * - bugfix for overwriting bootargs by user
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <image.h>
+#include <usb.h>
+#include <fat.h>
+
+#include "fwupdate.h"
+
+extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+extern long do_fat_read(const char *, void *, unsigned long, int);
+extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]);
+
+static int load_rescue_image(ulong);
+
+void cm5200_fwupdate(void)
+{
+ cmd_tbl_t *bcmd;
+ char *rsargs;
+ char *tmp = NULL;
+ char ka[16];
+ char *argv[3] = { "bootm", ka, NULL };
+
+ /* Check if rescue system is disabled... */
+ if (getenv("norescue")) {
+ printf(LOG_PREFIX "Rescue System disabled.\n");
+ return;
+ }
+
+ /* Check if we have a USB storage device and load image */
+ if (load_rescue_image(LOAD_ADDR))
+ return;
+
+ bcmd = find_cmd("bootm");
+ if (!bcmd)
+ return;
+
+ sprintf(ka, "%lx", LOAD_ADDR);
+
+ /* prepare our bootargs */
+ rsargs = getenv("rs-args");
+ if (!rsargs)
+ rsargs = RS_BOOTARGS;
+ else {
+ tmp = malloc(strlen(rsargs+1));
+ if (!tmp) {
+ printf(LOG_PREFIX "Memory allocation failed\n");
+ return;
+ }
+ strcpy(tmp, rsargs);
+ rsargs = tmp;
+ }
+
+ setenv("bootargs", rsargs);
+
+ if (rsargs == tmp)
+ free(rsargs);
+
+ printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs);
+ do_bootm(bcmd, 0, 2, argv);
+}
+
+static int load_rescue_image(ulong addr)
+{
+ disk_partition_t info;
+ int devno;
+ int partno;
+ int i;
+ char fwdir[64];
+ char nxri[128];
+ char *tmp;
+ char dev[7];
+ char addr_str[16];
+ char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL };
+ block_dev_desc_t *stor_dev = NULL;
+ cmd_tbl_t *bcmd;
+
+ /* Get name of firmware directory */
+ tmp = getenv("fw-dir");
+
+ /* Copy it into fwdir */
+ strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir));
+ fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */
+
+ printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB"
+ " storage...\n", fwdir);
+ usb_stop();
+ if (usb_init() != 0)
+ return 1;
+
+ /* Check for storage device */
+ if (usb_stor_scan(1) != 0) {
+ usb_stop();
+ return 1;
+ }
+
+ /* Detect storage device */
+ for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) {
+ stor_dev = usb_stor_get_dev(devno);
+ if (stor_dev->type != DEV_TYPE_UNKNOWN)
+ break;
+ }
+ if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) {
+ printf(LOG_PREFIX "No valid storage device found...\n");
+ usb_stop();
+ return 1;
+ }
+
+ /* Detect partition */
+ for (partno = -1, i = 0; i < 6; i++) {
+ if (get_partition_info(stor_dev, i, &info) == 0) {
+ if (fat_register_device(stor_dev, i) == 0) {
+ /* Check if rescue image is present */
+ FW_DEBUG("Looking for firmware directory '%s'"
+ " on partition %d\n", fwdir, i);
+ if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) {
+ FW_DEBUG("No NX rescue image on "
+ "partition %d.\n", i);
+ partno = -2;
+ } else {
+ partno = i;
+ FW_DEBUG("Partition %d contains "
+ "firmware directory\n", partno);
+ break;
+ }
+ }
+ }
+ }
+
+ if (partno < 0) {
+ switch (partno) {
+ case -1:
+ printf(LOG_PREFIX "Error: No valid (FAT) partition "
+ "detected\n");
+ break;
+ case -2:
+ printf(LOG_PREFIX "Error: No NX rescue image on FAT "
+ "partition\n");
+ break;
+ default:
+ printf(LOG_PREFIX "Error: Failed with code %d\n",
+ partno);
+ }
+ usb_stop();
+ return 1;
+ }
+
+ /* Load the rescue image */
+ bcmd = find_cmd("fatload");
+ if (!bcmd) {
+ printf(LOG_PREFIX "Error - 'fatload' command not present.\n");
+ usb_stop();
+ return 1;
+ }
+
+ tmp = getenv("nx-rescue-image");
+ sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE);
+ sprintf(dev, "%d:%d", devno, partno);
+ sprintf(addr_str, "%lx", addr);
+
+ FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n",
+ dev, addr_str, nxri);
+
+ if (do_fat_fsload(bcmd, 0, 5, argv) != 0) {
+ usb_stop();
+ return 1;
+ }
+
+ /* Stop USB */
+ usb_stop();
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FW_UPDATE_H
+#define __FW_UPDATE_H
+
+/* Default prefix for output messages */
+#define LOG_PREFIX "CM5200:"
+
+/* Extra debug macro */
+#ifdef CONFIG_FWUPDATE_DEBUG
+#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt)
+#else
+#define FW_DEBUG(fmt...)
+#endif
+
+/* Name of the directory holding firmware images */
+#define FW_DIR "nx-fw"
+#define RESCUE_IMAGE "nxrs.img"
+#define LOAD_ADDR 0x400000
+#define RS_BOOTARGS "ramdisk=8192K"
+
+/* Main function for fwupdate */
+void cm5200_fwupdate(void);
+
+#endif /* __FW_UPDATE_H */
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
#if defined(CONFIG_CANMB) || \
- defined(CONFIG_CM1_QP1) || \
+ defined(CONFIG_CM5200) || \
defined(CONFIG_HMI1001) || \
defined(CONFIG_ICECUBE) || \
defined(CONFIG_INKA4X0) || \
+++ /dev/null
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
-#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */
-
-
-/*
- * Supported commands
- */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_I2C | \
- CFG_CMD_FLASH | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP | \
- CFG_CMD_BSP | \
- CFG_CMD_USB | \
- CFG_CMD_FAT | \
- CFG_CMD_JFFS2)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC 1
-#define CONFIG_PHY_ADDR 0x00
-#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */
-/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */
-
-
-/*
- * POST support
- */
-#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C)
-#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
-/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
-
-
-/* display image timestamps */
-#define CONFIG_TIMESTAMP 1
-
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \
- "echo"
-#undef CONFIG_BOOTARGS
-
-/*
- * Default environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "hostname=cm1_qp1\0" \
- "netmask=255.255.0.0\0" \
- "ipaddr=192.168.160.33\0" \
- "serverip=192.168.1.1\0" \
- "gatewayip=192.168.1.1\0" \
- "console=ttyPSC0\0" \
- "u-boot_addr=100000\0" \
- "kernel_addr=200000\0" \
- "kernel_addr_flash=fc0c0000\0" \
- "fdt_addr=400000\0" \
- "fdt_addr_flash=fc0a0000\0" \
- "ramdisk_addr=500000\0" \
- "rootpath=/opt/eldk-4.1/ppc_6xx\0" \
- "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \
- "bootfile=/tftpboot/cm1_qp1/uImage\0" \
- "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \
- "load=tftp ${u-boot_addr} ${u-boot}\0" \
- "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \
- "cp.b ${u-boot_addr} fc000000 ${filesize}; " \
- "prot on fc000000 fc05ffff\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \
- "addcons=setenv bootargs ${bootargs} " \
- "console=${console},${baudrate}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off panic=1\0" \
- "flash_flash=run flashargs addinit addip addcons;" \
- "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \
- "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \
- "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \
- "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_flash"
-
-
-/*
- * Low level configuration
- */
-
-
-/*
- * Clock configuration
- */
-#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */
-#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */
-
-
-/*
- * Memory map
- */
-#define CFG_MBAR 0xF0000000
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_DEFAULT_MBAR 0x80000000
-
-#define CFG_LOWBOOT 1
-
-/* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
-#else
-#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
-#endif
-
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
-#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */
-#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
-
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT 1
-#endif
-
-
-/*
- * Chip selects configuration
- */
-/* Boot Chipselect */
-#define CFG_BOOTCS_START CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */
-/* use board_early_init_r to enable flash write in CS_BOOT */
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/* Flash memory addressing */
-#define CFG_CS0_START CFG_FLASH_BASE
-#define CFG_CS0_SIZE CFG_FLASH_SIZE
-
-/* No burst, dead cycle = 1 for CS0 (Flash) */
-#define CFG_CS_BURST 0x00000000
-#define CFG_CS_DEADCYCLE 0x00000001
-
-
-/*
- * SDRAM configuration
- * settings for k4s561632E-xx75, assuming XLB = 132 MHz
- */
-#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */
-#define SDRAM_CONTROL 0x514F0000
-#define SDRAM_CONFIG1 0xE2333900
-#define SDRAM_CONFIG2 0x8EE70000
-
-
-/*
- * Flash configuration
- */
-#define CFG_FLASH_CFI 1
-#define CFG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_BASE TEXT_BASE
-/* we need these despite using CFI */
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
-#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */
-
-
-/*
- * MTD configuration
- */
-#define CONFIG_JFFS2_CMDLINE 1
-#define MTDIDS_DEFAULT "nor0=cm1qp1-0"
-#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \
- "384k(uboot),128k(env)," \
- "128k(redund_env),128k(dtb)," \
- "2m(kernel),27904k(rootfs)," \
- "-(config)"
-
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_MODULE 2 /* Select I2C module #2 */
-#define CFG_I2C_SPEED 40000 /* 40 kHz */
-#define CFG_I2C_SLAVE 0x0
-#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */
-#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */
-
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
-
-
-/*
- * USB configuration
- */
-#define CONFIG_USB_OHCI 1
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00001000
-/* Partitions (for USB) */
-#define CONFIG_MAC_PARTITION 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_ISO_PARTITION 1
-
-/*
- * Invoke our last_stage_init function - needed by fwupdate
- */
-#define CONFIG_LAST_STAGE_INIT 1
-
-/*
- * Environment settings
- */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x10000
-#define CFG_ENV_SECT_SIZE 0x20000
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
-/* Configuration of redundant environment */
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
-
-
-/*
- * Pin multiplexing configuration
- */
-
-/*
- * CS1/GPIO_WKUP_6: GPIO (default)
- * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1
- * IRDA/PSC6: UART
- * Ether: Ethernet 100Mbit with MD
- * PCI_DIS: PCI controller disabled
- * USB: USB
- * PSC3: SPI with UART3
- * PSC2: UART
- * PSC1: UART
- */
-#define CFG_GPS_PORT_CONFIG 0x10559C44
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP 1 /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_ALT_MEMTEST 1
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */
-
-#define CONFIG_LOOPW 1
-
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-
-/*
- * Various low-level settings
- */
-#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL HID0_ICE
-
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */
-
-
-/*
- * Cache Configuration
- */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-
-/*
- * Flat Device Tree support
- */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */
-#define OF_CPU "PowerPC,5200@0"
-#define OF_SOC "soc5200@f0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
-
-#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_CM5200 1 /* ... on CM5200 platform */
+
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_I2C | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_MII | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_BSP | \
+ CFG_CMD_USB | \
+ CFG_CMD_FAT | \
+ CFG_CMD_JFFS2)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */
+
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */
+/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CONFIG_MISC_INIT_R 1
+#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */
+
+
+/*
+ * POST support
+ */
+#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C)
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+/* List of I2C addresses to be verified by POST */
+#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
+
+
+/* display image timestamps */
+#define CONFIG_TIMESTAMP 1
+
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \
+ "echo"
+#undef CONFIG_BOOTARGS
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "netmask=255.255.0.0\0" \
+ "ipaddr=192.168.160.33\0" \
+ "serverip=192.168.1.1\0" \
+ "gatewayip=192.168.1.1\0" \
+ "console=ttyPSC0\0" \
+ "u-boot_addr=100000\0" \
+ "kernel_addr=200000\0" \
+ "kernel_addr_flash=fc0c0000\0" \
+ "fdt_addr=400000\0" \
+ "fdt_addr_flash=fc0a0000\0" \
+ "ramdisk_addr=500000\0" \
+ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \
+ "u-boot=/tftpboot/cm5200/u-boot.bin\0" \
+ "bootfile_fdt=/tftpboot/cm5200/uImage\0" \
+ "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
+ "update=prot off fc000000 +${filesize}; " \
+ "era fc000000 +${filesize}; " \
+ "cp.b ${u-boot_addr} fc000000 ${filesize}; " \
+ "prot on fc000000 +${filesize}\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \
+ "addcons=setenv bootargs ${bootargs} " \
+ "console=${console},${baudrate}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off panic=1\0" \
+ "flash_flash=run flashargs addinit addip addcons;" \
+ "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \
+ "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \
+ "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \
+ "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_flash"
+
+
+/*
+ * Low level configuration
+ */
+
+
+/*
+ * Clock configuration
+ */
+#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */
+#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */
+
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+#define CFG_LOWBOOT 1
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_BOARD_TYPES 1 /* we use board_type */
+
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_BASE 0xfc000000
+/* we need these despite using CFI */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
+#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT 1
+#undef CFG_LOWBOOT
+#endif
+
+
+/*
+ * Chip selects configuration
+ */
+/* Boot Chipselect */
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */
+/* use board_early_init_r to enable flash write in CS_BOOT */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/* Flash memory addressing */
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* No burst, dead cycle = 1 for CS0 (Flash) */
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x00000001
+
+
+/*
+ * SDRAM configuration
+ * settings for k4s561632E-xx75, assuming XLB = 132 MHz
+ */
+#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */
+#define SDRAM_CONTROL 0x514F0000
+#define SDRAM_CONFIG1 0xE2333900
+#define SDRAM_CONFIG2 0x8EE70000
+
+
+
+/*
+ * MTD configuration
+ */
+#define CONFIG_JFFS2_CMDLINE 1
+#define MTDIDS_DEFAULT "nor0=cm5200-0"
+#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \
+ "384k(uboot),128k(env)," \
+ "128k(redund_env),128k(dtb)," \
+ "2m(kernel),27904k(rootfs)," \
+ "-(config)"
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 */
+#define CFG_I2C_SPEED 40000 /* 40 kHz */
+#define CFG_I2C_SLAVE 0x0
+#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */
+#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */
+
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+
+
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
+/* Partitions (for USB) */
+#define CONFIG_MAC_PARTITION 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_ISO_PARTITION 1
+
+/*
+ * Invoke our last_stage_init function - needed by fwupdate
+ */
+#define CONFIG_LAST_STAGE_INIT 1
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+/* Configuration of redundant environment */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+
+/*
+ * Pin multiplexing configuration
+ */
+
+/*
+ * CS1/GPIO_WKUP_6: GPIO (default)
+ * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1
+ * IRDA/PSC6: UART
+ * Ether: Ethernet 100Mbit with MD
+ * PCI_DIS: PCI controller disabled
+ * USB: USB
+ * PSC3: SPI with UART3
+ * PSC2: UART
+ * PSC1: UART
+ */
+#define CFG_GPS_PORT_CONFIG 0x10559C44
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_ALT_MEMTEST 1
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */
+
+#define CONFIG_LOOPW 1
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */
+
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Flat Device Tree support
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
+#endif /* __CONFIG_H */
projects / u-boot / commitdiff