* Prepare for SoC rework of ARM code:
- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)
+ Patch by Steven Scholz, 03 Apr 2005:
+ - create SoC specific directories include/asm-arm/arch-imx and
+ include/asm-arm/arch-s3c24x0
* Fix problems with SNTP support;
enable SNTP support in some boards.
#include <common.h>
/*#include <mc9328.h>*/
-#include <asm/arch-arm920t/imx-regs.h>
+#include <asm/arch/imx-regs.h>
/* ------------------------------------------------------------------------- */
+++ /dev/null
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- * Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-# ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)(x)))
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-# else
-# define __REG(x) (x)
-# define __REG2(x,y) ((x)+(y))
-#endif
-
-#define IMX_IO_BASE 0x00200000
-
-/*
- * Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
-#define IMX_SYSCTRL_BASE (0x1B800 + IMX_IO_BASE)
-#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
-
-/* SYSCTRL Registers */
-#define SIDR __REG(IMX_SYSCTRL_BASE + 0x4) /* Silicon ID Register */
-#define FMCR __REG(IMX_SYSCTRL_BASE + 0x8) /* Function Multiplex Control Register */
-#define GPCR __REG(IMX_SYSCTRL_BASE + 0xC) /* Function Multiplex Control Register */
-
-/* Chip Select Registers */
-#define CS0U __REG(IMX_EIM_BASE) /* Chip Select 0 Upper Register */
-#define CS0L __REG(IMX_EIM_BASE + 0x4) /* Chip Select 0 Lower Register */
-#define CS1U __REG(IMX_EIM_BASE + 0x8) /* Chip Select 1 Upper Register */
-#define CS1L __REG(IMX_EIM_BASE + 0xc) /* Chip Select 1 Lower Register */
-#define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */
-#define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */
-#define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */
-#define CS3L __REG(IMX_EIM_BASE + 0x1c) /* Chip Select 3 Lower Register */
-#define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */
-#define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */
-#define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */
-#define CS5L __REG(IMX_EIM_BASE + 0x2c) /* Chip Select 5 Lower Register */
-#define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */
-
-/* SDRAM controller registers */
-
-#define SDCTL0 __REG(IMX_SDRAMC_BASE) /* SDRAM 0 Control Register */
-#define SDCTL1 __REG(IMX_SDRAMC_BASE + 0x4) /* SDRAM 1 Control Register */
-#define SDMISC __REG(IMX_SDRAMC_BASE + 0x14) /* Miscellaneous Register */
-#define SDRST __REG(IMX_SDRAMC_BASE + 0x18) /* SDRAM Reset Register */
-
-/* PLL registers */
-#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-#define CSCR_MPLL_RESTART (1<<21)
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT (1<<7)
-#define GPIO_IN (0<<7)
-#define GPIO_PUEN (1<<8)
-
-#define GPIO_PF (0<<9)
-#define GPIO_AF (1<<9)
-
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN (0<<10)
-#define GPIO_BIN (1<<10)
-#define GPIO_CIN (2<<10)
-#define GPIO_GPIO (3<<10)
-
-#define GPIO_AOUT (1<<12)
-#define GPIO_BOUT (1<<13)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 )
-#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
-#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
-#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
-#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
-#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 11 )
-#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | GPIO_OUT | 12 )
-#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_OUT | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
-#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
-#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
-#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * DMA Controller
- */
-#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
-#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
-#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
-#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
-#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
-#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
-#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
-#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
-#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
-#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
-#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
-#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
-#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
-#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
-#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
-#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
-#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
-
-/* TODO: define DMA_REQ lines */
-
-#define DCR_DRST (1<<1)
-#define DCR_DEN (1<<0)
-#define DBTOCR_EN (1<<15)
-#define DBTOCR_CNT(x) ((x) & 0x7fff )
-#define CNTR_CNT(x) ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR ( 0x0 << 12 )
-#define CCR_DMOD_2D ( 0x1 << 12 )
-#define CCR_DMOD_FIFO ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR ( 0x0 << 10 )
-#define CCR_SMOD_2D ( 0x1 << 10 )
-#define CCR_SMOD_FIFO ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
-#define CCR_MDIR_DEC (1<<9)
-#define CCR_MSEL_B (1<<8)
-#define CCR_DSIZ_32 ( 0x0 << 6 )
-#define CCR_DSIZ_8 ( 0x1 << 6 )
-#define CCR_DSIZ_16 ( 0x2 << 6 )
-#define CCR_SSIZ_32 ( 0x0 << 4 )
-#define CCR_SSIZ_8 ( 0x1 << 4 )
-#define CCR_SSIZ_16 ( 0x2 << 4 )
-#define CCR_REN (1<<3)
-#define CCR_RPT (1<<2)
-#define CCR_FRC (1<<1)
-#define CCR_CEN (1<<0)
-#define RTOR_EN (1<<15)
-#define RTOR_CLK (1<<14)
-#define RTOR_PSC (1<<13)
-
-/*
- * LCD Controller
- */
-
-#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
-
-#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
-#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#define SIZE_YMAX(y) ( (y) & 0x1ff )
-
-#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
-#define VPW_VPW(x) ( (x) & 0x3ff )
-
-#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
-#define CPOS_CC1 (1<<31)
-#define CPOS_CC0 (1<<30)
-#define CPOS_OP (1<<28)
-#define CPOS_CXP(x) (((x) & 3ff) << 16)
-#define CPOS_CYP(y) ((y) & 0x1ff)
-
-#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
-#define LCWHB_BK_EN (1<<31)
-#define LCWHB_CW(w) (((w) & 0x1f) << 24)
-#define LCWHB_CH(h) (((h) & 0x1f) << 16)
-#define LCWHB_BD(x) ((x) & 0xff)
-
-#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-
-#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
-#define PCR_TFT (1<<31)
-#define PCR_COLOR (1<<30)
-#define PCR_PBSIZ_1 (0<<28)
-#define PCR_PBSIZ_2 (1<<28)
-#define PCR_PBSIZ_4 (2<<28)
-#define PCR_PBSIZ_8 (3<<28)
-#define PCR_BPIX_1 (0<<25)
-#define PCR_BPIX_2 (1<<25)
-#define PCR_BPIX_4 (2<<25)
-#define PCR_BPIX_8 (3<<25)
-#define PCR_BPIX_12 (4<<25)
-#define PCR_BPIX_16 (4<<25)
-#define PCR_PIXPOL (1<<24)
-#define PCR_FLMPOL (1<<23)
-#define PCR_LPPOL (1<<22)
-#define PCR_CLKPOL (1<<21)
-#define PCR_OEPOL (1<<20)
-#define PCR_SCLKIDLE (1<<19)
-#define PCR_END_SEL (1<<18)
-#define PCR_END_BYTE_SWAP (1<<17)
-#define PCR_REV_VS (1<<16)
-#define PCR_ACD_SEL (1<<15)
-#define PCR_ACD(x) (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL (1<<7)
-#define PCR_SHARP (1<<6)
-#define PCR_PCD(x) ((x) & 0x3f)
-
-#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
-#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
-#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
-#define HCR_H_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
-#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
-#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
-#define VCR_V_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
-#define POS_POS(x) ((x) & 1f)
-
-#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_GRAY1(x) (((x) & 0xf) << 4)
-#define LSCR1_GRAY2(x) ((x) & 0xf)
-
-#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
-#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK (1<<15)
-#define PWMR_SCR1 (1<<10)
-#define PWMR_SCR0 (1<<9)
-#define PWMR_CC_EN (1<<8)
-#define PWMR_PW(x) ((x) & 0xff)
-
-#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
-#define DMACR_BURST (1<<31)
-#define DMACR_HM(x) (((x) & 0xf) << 16)
-#define DMACR_TM(x) ((x) &0xf)
-
-#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
-#define RMCR_LCDC_EN (1<<1)
-#define RMCR_SELF_REF (1<<0)
-
-#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
-#define LCDICR_INT_SYN (1<<2)
-#define LCDICR_INT_CON (1)
-
-#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
-#define LCDISR_UDR_ERR (1<<3)
-#define LCDISR_ERR_RES (1<<2)
-#define LCDISR_EOF (1<<1)
-#define LCDISR_BOF (1<<0)
-/*
- * UART Module
- */
-#define URXD0(x) __REG2( IMX_UART1_BASE + 0x0, ((x) & 1) << 12) /* Receiver Register */
-#define URTX0(x) __REG2( IMX_UART1_BASE + 0x40, ((x) & 1) << 12) /* Transmitter Register */
-#define UCR1(x) __REG2( IMX_UART1_BASE + 0x80, ((x) & 1) << 12) /* Control Register 1 */
-#define UCR2(x) __REG2( IMX_UART1_BASE + 0x84, ((x) & 1) << 12) /* Control Register 2 */
-#define UCR3(x) __REG2( IMX_UART1_BASE + 0x88, ((x) & 1) << 12) /* Control Register 3 */
-#define UCR4(x) __REG2( IMX_UART1_BASE + 0x8c, ((x) & 1) << 12) /* Control Register 4 */
-#define UFCR(x) __REG2( IMX_UART1_BASE + 0x90, ((x) & 1) << 12) /* FIFO Control Register */
-#define USR1(x) __REG2( IMX_UART1_BASE + 0x94, ((x) & 1) << 12) /* Status Register 1 */
-#define USR2(x) __REG2( IMX_UART1_BASE + 0x98, ((x) & 1) << 12) /* Status Register 2 */
-#define UESC(x) __REG2( IMX_UART1_BASE + 0x9c, ((x) & 1) << 12) /* Escape Character Register */
-#define UTIM(x) __REG2( IMX_UART1_BASE + 0xa0, ((x) & 1) << 12) /* Escape Timer Register */
-#define UBIR(x) __REG2( IMX_UART1_BASE + 0xa4, ((x) & 1) << 12) /* BRM Incremental Register */
-#define UBMR(x) __REG2( IMX_UART1_BASE + 0xa8, ((x) & 1) << 12) /* BRM Modulator Register */
-#define UBRC(x) __REG2( IMX_UART1_BASE + 0xac, ((x) & 1) << 12) /* Baud Rate Count Register */
-#define BIPR1(x) __REG2( IMX_UART1_BASE + 0xb0, ((x) & 1) << 12) /* Incremental Preset Register 1 */
-#define BIPR2(x) __REG2( IMX_UART1_BASE + 0xb4, ((x) & 1) << 12) /* Incremental Preset Register 2 */
-#define BIPR3(x) __REG2( IMX_UART1_BASE + 0xb8, ((x) & 1) << 12) /* Incremental Preset Register 3 */
-#define BIPR4(x) __REG2( IMX_UART1_BASE + 0xbc, ((x) & 1) << 12) /* Incremental Preset Register 4 */
-#define BMPR1(x) __REG2( IMX_UART1_BASE + 0xc0, ((x) & 1) << 12) /* BRM Modulator Register 1 */
-#define BMPR2(x) __REG2( IMX_UART1_BASE + 0xc4, ((x) & 1) << 12) /* BRM Modulator Register 2 */
-#define BMPR3(x) __REG2( IMX_UART1_BASE + 0xc8, ((x) & 1) << 12) /* BRM Modulator Register 3 */
-#define BMPR4(x) __REG2( IMX_UART1_BASE + 0xcc, ((x) & 1) << 12) /* BRM Modulator Register 4 */
-#define UTS(x) __REG2( IMX_UART1_BASE + 0xd0, ((x) & 1) << 12) /* UART Test Register */
-
-/* UART Control Register Bit Fields.*/
-#define URXD_CHARRDY (1<<15)
-#define URXD_ERR (1<<14)
-#define URXD_OVRRUN (1<<13)
-#define URXD_FRMERR (1<<12)
-#define URXD_BRK (1<<11)
-#define URXD_PRERR (1<<10)
-#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
-#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
-#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
-#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
-#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
-#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
-#define UCR1_IREN (1<<7) /* Infrared interface enable */
-#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
-#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
-#define UCR1_SNDBRK (1<<4) /* Send break */
-#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
-#define UCR1_DOZE (1<<1) /* Doze */
-#define UCR1_UARTEN (1<<0) /* UART enabled */
-#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
-#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
-#define UCR2_CTSC (1<<13) /* CTS pin control */
-#define UCR2_CTS (1<<12) /* Clear to send */
-#define UCR2_ESCEN (1<<11) /* Escape enable */
-#define UCR2_PREN (1<<8) /* Parity enable */
-#define UCR2_PROE (1<<7) /* Parity odd/even */
-#define UCR2_STPB (1<<6) /* Stop */
-#define UCR2_WS (1<<5) /* Word size */
-#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
-#define UCR2_TXEN (1<<2) /* Transmitter enabled */
-#define UCR2_RXEN (1<<1) /* Receiver enabled */
-#define UCR2_SRST (1<<0) /* SW reset */
-#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
-#define UCR3_PARERREN (1<<12) /* Parity enable */
-#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
-#define UCR3_DSR (1<<10) /* Data set ready */
-#define UCR3_DCD (1<<9) /* Data carrier detect */
-#define UCR3_RI (1<<8) /* Ring indicator */
-#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
-#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
-#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
-#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
-#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
-#define UCR3_BPEN (1<<0) /* Preset registers enable */
-#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
-#define UCR4_INVR (1<<9) /* Inverted infrared reception */
-#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
-#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
-#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
-#define UCR4_IRSC (1<<5) /* IR special case */
-#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
-#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
-#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
-#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
-#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
-#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
-#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
-#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
-#define USR1_RTSS (1<<14) /* RTS pin status */
-#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
-#define USR1_RTSD (1<<12) /* RTS delta */
-#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
-#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
-#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
-#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
-#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
-#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
-#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
-#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
-#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
-#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
-#define USR2_IDLE (1<<12) /* Idle condition */
-#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
-#define USR2_WAKE (1<<7) /* Wake */
-#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
-#define USR2_TXDC (1<<3) /* Transmitter complete */
-#define USR2_BRCD (1<<2) /* Break condition */
-#define USR2_ORE (1<<1) /* Overrun error */
-#define USR2_RDR (1<<0) /* Recv data ready */
-#define UTS_FRCPERR (1<<13) /* Force parity error */
-#define UTS_LOOP (1<<12) /* Loop tx and rx */
-#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
-#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
-#define UTS_TXFULL (1<<4) /* TxFIFO full */
-#define UTS_RXFULL (1<<3) /* RxFIFO full */
-#define UTS_SOFTRST (1<<0) /* Software reset */
-
-/* General purpose timers registers */
-#define TCTL1 __REG(IMX_TIM1_BASE)
-#define TPRER1 __REG(IMX_TIM1_BASE + 0x4)
-#define TCMP1 __REG(IMX_TIM1_BASE + 0x8)
-#define TCR1 __REG(IMX_TIM1_BASE + 0xc)
-#define TCN1 __REG(IMX_TIM1_BASE + 0x10)
-#define TSTAT1 __REG(IMX_TIM1_BASE + 0x14)
-#define TCTL2 __REG(IMX_TIM2_BASE)
-#define TPRER2 __REG(IMX_TIM2_BASE + 0x4)
-#define TCMP2 __REG(IMX_TIM2_BASE + 0x8)
-#define TCR2 __REG(IMX_TIM2_BASE + 0xc)
-#define TCN2 __REG(IMX_TIM2_BASE + 0x10)
-#define TSTAT2 __REG(IMX_TIM2_BASE + 0x14)
-
-/* General purpose timers bitfields */
-#define TCTL_SWR (1<<15) /* Software reset */
-#define TCTL_FRR (1<<8) /* Freerun / restart */
-#define TCTL_CAP (3<<6) /* Capture Edge */
-#define TCTL_OM (1<<5) /* output mode */
-#define TCTL_IRQEN (1<<4) /* interrupt enable */
-#define TCTL_CLKSOURCE (7<<1) /* Clock source */
-#define TCTL_TEN (1) /* Timer enable */
-#define TPRER_PRES (0xff) /* Prescale */
-#define TSTAT_CAPT (1<<1) /* Capture event */
-#define TSTAT_COMP (1) /* Compare event */
-
-#endif /* _IMX_REGS_H */
+++ /dev/null
-/*
- * linux/include/asm-arm/arch-s3c2400/memory.h by gj@denx.de
- * based on
- * linux/include/asm-arm/arch-sa1100/memory.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@visuaide.com>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-/*
- * Task size: 3GB
- */
-#define TASK_SIZE (0xc0000000UL)
-#define TASK_SIZE_26 (0x04000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
-
-/*
- * Page offset: 3GB
- */
-#define PAGE_OFFSET (0xc0000000UL)
-
-/*
- * Physical DRAM offset is 0x0c000000 on the S3C2400
- */
-#define PHYS_OFFSET (0x0c000000UL)
-
-#include <linux/config.h>
-
-
-/* Modified for S3C2400, by chc, 20010509 */
-#define RAM_IN_BANK_0 32*1024*1024
-#define RAM_IN_BANK_1 0
-#define RAM_IN_BANK_2 0
-#define RAM_IN_BANK_3 0
-
-#define MEM_SIZE (RAM_IN_BANK_0+RAM_IN_BANK_1+RAM_IN_BANK_2+RAM_IN_BANK_3)
-
-
-/* translation macros */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
-
-#if (RAM_IN_BANK_1 + RAM_IN_BANK_2 + RAM_IN_BANK_3 == 0)
-
-#define __virt_to_phys(x) ( (x) - PAGE_OFFSET + 0x0c000000 )
-#define __phys_to_virt(x) ( (x) - 0x0c000000 + PAGE_OFFSET )
-
-#elif (RAM_IN_BANK_0 == RAM_IN_BANK_1) && \
- (RAM_IN_BANK_2 + RAM_IN_BANK_3 == 0)
-
-/* Two identical banks */
-#define __virt_to_phys(x) \
- ( ((x) < PAGE_OFFSET+RAM_IN_BANK_0) ? \
- ((x) - PAGE_OFFSET + _DRAMBnk0) : \
- ((x) - PAGE_OFFSET - RAM_IN_BANK_0 + _DRAMBnk1) )
-#define __phys_to_virt(x) \
- ( ((x)&0x07ffffff) + \
- (((x)&0x08000000) ? PAGE_OFFSET+RAM_IN_BANK_0 : PAGE_OFFSET) )
-#else
-
-/* It's more efficient for all other cases to use the function call */
-#undef __virt_to_phys__is_a_macro
-#undef __phys_to_virt__is_a_macro
-extern unsigned long __virt_to_phys(unsigned long vpage);
-extern unsigned long __phys_to_virt(unsigned long ppage);
-
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus__is_a_macro
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
-#ifdef CONFIG_DISCONTIGMEM
-#error "CONFIG_DISCONTIGMEM will not work on S3C2400"
-/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation. Assuming all memory nodes have equal access
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are
- * incidentally the same as virtual addresses.
- *
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
- */
-
-#define NR_NODES 4
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
- (((unsigned long)(addr) - 0xc0000000) >> 27)
-
-/*
- * Given a physical address, convert it to a node id.
- */
-#define PHYS_TO_NID(addr) KVADDR_TO_NID(__phys_to_virt(addr))
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) \
- NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr)))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(kvaddr) \
- (((unsigned long)(kvaddr) & 0x07ffffff) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, virt_to_page returns a pointer to the corresponding
- * mem_map entry.
- */
-#define virt_to_page(kaddr) \
- (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-/*
- * VALID_PAGE returns a non-zero value if given page pointer is valid.
- * This assumes all node's mem_maps are stored within the node they refer to.
- */
-#define VALID_PAGE(page) \
-({ unsigned int node = KVADDR_TO_NID(page); \
- ( (node < NR_NODES) && \
- ((unsigned)((page) - NODE_MEM_MAP(node)) < NODE_DATA(node)->node_size) ); \
-})
-
-#else
-
-#define PHYS_TO_NID(addr) (0)
-
-#endif
-#endif /* __ASM_ARCH_MEMORY_H */
--- /dev/null
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ * Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+# ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 *)(x)))
+# define __REG2(x,y) \
+ ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+ : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+# else
+# define __REG(x) (x)
+# define __REG2(x,y) ((x)+(y))
+#endif
+
+#define IMX_IO_BASE 0x00200000
+
+/*
+ * Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
+#define IMX_SYSCTRL_BASE (0x1B800 + IMX_IO_BASE)
+#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
+
+/* SYSCTRL Registers */
+#define SIDR __REG(IMX_SYSCTRL_BASE + 0x4) /* Silicon ID Register */
+#define FMCR __REG(IMX_SYSCTRL_BASE + 0x8) /* Function Multiplex Control Register */
+#define GPCR __REG(IMX_SYSCTRL_BASE + 0xC) /* Function Multiplex Control Register */
+
+/* Chip Select Registers */
+#define CS0U __REG(IMX_EIM_BASE) /* Chip Select 0 Upper Register */
+#define CS0L __REG(IMX_EIM_BASE + 0x4) /* Chip Select 0 Lower Register */
+#define CS1U __REG(IMX_EIM_BASE + 0x8) /* Chip Select 1 Upper Register */
+#define CS1L __REG(IMX_EIM_BASE + 0xc) /* Chip Select 1 Lower Register */
+#define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */
+#define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */
+#define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */
+#define CS3L __REG(IMX_EIM_BASE + 0x1c) /* Chip Select 3 Lower Register */
+#define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */
+#define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */
+#define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */
+#define CS5L __REG(IMX_EIM_BASE + 0x2c) /* Chip Select 5 Lower Register */
+#define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */
+
+/* SDRAM controller registers */
+
+#define SDCTL0 __REG(IMX_SDRAMC_BASE) /* SDRAM 0 Control Register */
+#define SDCTL1 __REG(IMX_SDRAMC_BASE + 0x4) /* SDRAM 1 Control Register */
+#define SDMISC __REG(IMX_SDRAMC_BASE + 0x14) /* Miscellaneous Register */
+#define SDRST __REG(IMX_SDRAMC_BASE + 0x18) /* SDRAM Reset Register */
+
+/* PLL registers */
+#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+#define CSCR_MPLL_RESTART (1<<21)
+
+/*
+ * GPIO Module and I/O Multiplexer
+ * x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT (1<<7)
+#define GPIO_IN (0<<7)
+#define GPIO_PUEN (1<<8)
+
+#define GPIO_PF (0<<9)
+#define GPIO_AF (1<<9)
+
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN (0<<10)
+#define GPIO_BIN (1<<10)
+#define GPIO_CIN (2<<10)
+#define GPIO_GPIO (3<<10)
+
+#define GPIO_AOUT (1<<12)
+#define GPIO_BOUT (1<<13)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 )
+#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
+#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
+#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
+#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
+#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 11 )
+#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | GPIO_OUT | 12 )
+#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_OUT | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
+#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
+#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
+#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ * DMA Controller
+ */
+#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
+#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
+#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
+#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
+#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
+#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
+#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
+#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
+#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
+#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
+#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
+#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
+#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
+#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
+#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
+#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
+#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
+#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
+
+/* TODO: define DMA_REQ lines */
+
+#define DCR_DRST (1<<1)
+#define DCR_DEN (1<<0)
+#define DBTOCR_EN (1<<15)
+#define DBTOCR_CNT(x) ((x) & 0x7fff )
+#define CNTR_CNT(x) ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR ( 0x0 << 12 )
+#define CCR_DMOD_2D ( 0x1 << 12 )
+#define CCR_DMOD_FIFO ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR ( 0x0 << 10 )
+#define CCR_SMOD_2D ( 0x1 << 10 )
+#define CCR_SMOD_FIFO ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
+#define CCR_MDIR_DEC (1<<9)
+#define CCR_MSEL_B (1<<8)
+#define CCR_DSIZ_32 ( 0x0 << 6 )
+#define CCR_DSIZ_8 ( 0x1 << 6 )
+#define CCR_DSIZ_16 ( 0x2 << 6 )
+#define CCR_SSIZ_32 ( 0x0 << 4 )
+#define CCR_SSIZ_8 ( 0x1 << 4 )
+#define CCR_SSIZ_16 ( 0x2 << 4 )
+#define CCR_REN (1<<3)
+#define CCR_RPT (1<<2)
+#define CCR_FRC (1<<1)
+#define CCR_CEN (1<<0)
+#define RTOR_EN (1<<15)
+#define RTOR_CLK (1<<14)
+#define RTOR_PSC (1<<13)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y) ( (y) & 0x1ff )
+
+#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x) ( (x) & 0x3ff )
+
+#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1 (1<<31)
+#define CPOS_CC0 (1<<30)
+#define CPOS_OP (1<<28)
+#define CPOS_CXP(x) (((x) & 3ff) << 16)
+#define CPOS_CYP(y) ((y) & 0x1ff)
+
+#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN (1<<31)
+#define LCWHB_CW(w) (((w) & 0x1f) << 24)
+#define LCWHB_CH(h) (((h) & 0x1f) << 16)
+#define LCWHB_BD(x) ((x) & 0xff)
+
+#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT (1<<31)
+#define PCR_COLOR (1<<30)
+#define PCR_PBSIZ_1 (0<<28)
+#define PCR_PBSIZ_2 (1<<28)
+#define PCR_PBSIZ_4 (2<<28)
+#define PCR_PBSIZ_8 (3<<28)
+#define PCR_BPIX_1 (0<<25)
+#define PCR_BPIX_2 (1<<25)
+#define PCR_BPIX_4 (2<<25)
+#define PCR_BPIX_8 (3<<25)
+#define PCR_BPIX_12 (4<<25)
+#define PCR_BPIX_16 (4<<25)
+#define PCR_PIXPOL (1<<24)
+#define PCR_FLMPOL (1<<23)
+#define PCR_LPPOL (1<<22)
+#define PCR_CLKPOL (1<<21)
+#define PCR_OEPOL (1<<20)
+#define PCR_SCLKIDLE (1<<19)
+#define PCR_END_SEL (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS (1<<16)
+#define PCR_ACD_SEL (1<<15)
+#define PCR_ACD(x) (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL (1<<7)
+#define PCR_SHARP (1<<6)
+#define PCR_PCD(x) ((x) & 0x3f)
+
+#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x) ((x) & 1f)
+
+#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_GRAY1(x) (((x) & 0xf) << 4)
+#define LSCR1_GRAY2(x) ((x) & 0xf)
+
+#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK (1<<15)
+#define PWMR_SCR1 (1<<10)
+#define PWMR_SCR0 (1<<9)
+#define PWMR_CC_EN (1<<8)
+#define PWMR_PW(x) ((x) & 0xff)
+
+#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST (1<<31)
+#define DMACR_HM(x) (((x) & 0xf) << 16)
+#define DMACR_TM(x) ((x) &0xf)
+
+#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN (1<<1)
+#define RMCR_SELF_REF (1<<0)
+
+#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN (1<<2)
+#define LCDICR_INT_CON (1)
+
+#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF (1<<1)
+#define LCDISR_BOF (1<<0)
+/*
+ * UART Module
+ */
+#define URXD0(x) __REG2( IMX_UART1_BASE + 0x0, ((x) & 1) << 12) /* Receiver Register */
+#define URTX0(x) __REG2( IMX_UART1_BASE + 0x40, ((x) & 1) << 12) /* Transmitter Register */
+#define UCR1(x) __REG2( IMX_UART1_BASE + 0x80, ((x) & 1) << 12) /* Control Register 1 */
+#define UCR2(x) __REG2( IMX_UART1_BASE + 0x84, ((x) & 1) << 12) /* Control Register 2 */
+#define UCR3(x) __REG2( IMX_UART1_BASE + 0x88, ((x) & 1) << 12) /* Control Register 3 */
+#define UCR4(x) __REG2( IMX_UART1_BASE + 0x8c, ((x) & 1) << 12) /* Control Register 4 */
+#define UFCR(x) __REG2( IMX_UART1_BASE + 0x90, ((x) & 1) << 12) /* FIFO Control Register */
+#define USR1(x) __REG2( IMX_UART1_BASE + 0x94, ((x) & 1) << 12) /* Status Register 1 */
+#define USR2(x) __REG2( IMX_UART1_BASE + 0x98, ((x) & 1) << 12) /* Status Register 2 */
+#define UESC(x) __REG2( IMX_UART1_BASE + 0x9c, ((x) & 1) << 12) /* Escape Character Register */
+#define UTIM(x) __REG2( IMX_UART1_BASE + 0xa0, ((x) & 1) << 12) /* Escape Timer Register */
+#define UBIR(x) __REG2( IMX_UART1_BASE + 0xa4, ((x) & 1) << 12) /* BRM Incremental Register */
+#define UBMR(x) __REG2( IMX_UART1_BASE + 0xa8, ((x) & 1) << 12) /* BRM Modulator Register */
+#define UBRC(x) __REG2( IMX_UART1_BASE + 0xac, ((x) & 1) << 12) /* Baud Rate Count Register */
+#define BIPR1(x) __REG2( IMX_UART1_BASE + 0xb0, ((x) & 1) << 12) /* Incremental Preset Register 1 */
+#define BIPR2(x) __REG2( IMX_UART1_BASE + 0xb4, ((x) & 1) << 12) /* Incremental Preset Register 2 */
+#define BIPR3(x) __REG2( IMX_UART1_BASE + 0xb8, ((x) & 1) << 12) /* Incremental Preset Register 3 */
+#define BIPR4(x) __REG2( IMX_UART1_BASE + 0xbc, ((x) & 1) << 12) /* Incremental Preset Register 4 */
+#define BMPR1(x) __REG2( IMX_UART1_BASE + 0xc0, ((x) & 1) << 12) /* BRM Modulator Register 1 */
+#define BMPR2(x) __REG2( IMX_UART1_BASE + 0xc4, ((x) & 1) << 12) /* BRM Modulator Register 2 */
+#define BMPR3(x) __REG2( IMX_UART1_BASE + 0xc8, ((x) & 1) << 12) /* BRM Modulator Register 3 */
+#define BMPR4(x) __REG2( IMX_UART1_BASE + 0xcc, ((x) & 1) << 12) /* BRM Modulator Register 4 */
+#define UTS(x) __REG2( IMX_UART1_BASE + 0xd0, ((x) & 1) << 12) /* UART Test Register */
+
+/* UART Control Register Bit Fields.*/
+#define URXD_CHARRDY (1<<15)
+#define URXD_ERR (1<<14)
+#define URXD_OVRRUN (1<<13)
+#define URXD_FRMERR (1<<12)
+#define URXD_BRK (1<<11)
+#define URXD_PRERR (1<<10)
+#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
+#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
+#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
+#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
+#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
+#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
+#define UCR1_IREN (1<<7) /* Infrared interface enable */
+#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
+#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
+#define UCR1_SNDBRK (1<<4) /* Send break */
+#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
+#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
+#define UCR1_DOZE (1<<1) /* Doze */
+#define UCR1_UARTEN (1<<0) /* UART enabled */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_CTS (1<<12) /* Clear to send */
+#define UCR2_ESCEN (1<<11) /* Escape enable */
+#define UCR2_PREN (1<<8) /* Parity enable */
+#define UCR2_PROE (1<<7) /* Parity odd/even */
+#define UCR2_STPB (1<<6) /* Stop */
+#define UCR2_WS (1<<5) /* Word size */
+#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
+#define UCR2_TXEN (1<<2) /* Transmitter enabled */
+#define UCR2_RXEN (1<<1) /* Receiver enabled */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR3_PARERREN (1<<12) /* Parity enable */
+#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
+#define UCR3_DSR (1<<10) /* Data set ready */
+#define UCR3_DCD (1<<9) /* Data carrier detect */
+#define UCR3_RI (1<<8) /* Ring indicator */
+#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
+#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
+#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
+#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
+#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
+#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
+#define USR2_ORE (1<<1) /* Overrun error */
+#define USR2_RDR (1<<0) /* Recv data ready */
+#define UTS_FRCPERR (1<<13) /* Force parity error */
+#define UTS_LOOP (1<<12) /* Loop tx and rx */
+#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
+#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_SOFTRST (1<<0) /* Software reset */
+
+/* General purpose timers registers */
+#define TCTL1 __REG(IMX_TIM1_BASE)
+#define TPRER1 __REG(IMX_TIM1_BASE + 0x4)
+#define TCMP1 __REG(IMX_TIM1_BASE + 0x8)
+#define TCR1 __REG(IMX_TIM1_BASE + 0xc)
+#define TCN1 __REG(IMX_TIM1_BASE + 0x10)
+#define TSTAT1 __REG(IMX_TIM1_BASE + 0x14)
+#define TCTL2 __REG(IMX_TIM2_BASE)
+#define TPRER2 __REG(IMX_TIM2_BASE + 0x4)
+#define TCMP2 __REG(IMX_TIM2_BASE + 0x8)
+#define TCR2 __REG(IMX_TIM2_BASE + 0xc)
+#define TCN2 __REG(IMX_TIM2_BASE + 0x10)
+#define TSTAT2 __REG(IMX_TIM2_BASE + 0x14)
+
+/* General purpose timers bitfields */
+#define TCTL_SWR (1<<15) /* Software reset */
+#define TCTL_FRR (1<<8) /* Freerun / restart */
+#define TCTL_CAP (3<<6) /* Capture Edge */
+#define TCTL_OM (1<<5) /* output mode */
+#define TCTL_IRQEN (1<<4) /* interrupt enable */
+#define TCTL_CLKSOURCE (7<<1) /* Clock source */
+#define TCTL_TEN (1) /* Timer enable */
+#define TPRER_PRES (0xff) /* Prescale */
+#define TSTAT_CAPT (1<<1) /* Capture event */
+#define TSTAT_COMP (1) /* Compare event */
+
+#endif /* _IMX_REGS_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-s3c2400/memory.h by gj@denx.de
+ * based on
+ * linux/include/asm-arm/arch-sa1100/memory.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@visuaide.com>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+/*
+ * Task size: 3GB
+ */
+#define TASK_SIZE (0xc0000000UL)
+#define TASK_SIZE_26 (0x04000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
+
+/*
+ * Page offset: 3GB
+ */
+#define PAGE_OFFSET (0xc0000000UL)
+
+/*
+ * Physical DRAM offset is 0x0c000000 on the S3C2400
+ */
+#define PHYS_OFFSET (0x0c000000UL)
+
+#include <linux/config.h>
+
+
+/* Modified for S3C2400, by chc, 20010509 */
+#define RAM_IN_BANK_0 32*1024*1024
+#define RAM_IN_BANK_1 0
+#define RAM_IN_BANK_2 0
+#define RAM_IN_BANK_3 0
+
+#define MEM_SIZE (RAM_IN_BANK_0+RAM_IN_BANK_1+RAM_IN_BANK_2+RAM_IN_BANK_3)
+
+
+/* translation macros */
+#define __virt_to_phys__is_a_macro
+#define __phys_to_virt__is_a_macro
+
+#if (RAM_IN_BANK_1 + RAM_IN_BANK_2 + RAM_IN_BANK_3 == 0)
+
+#define __virt_to_phys(x) ( (x) - PAGE_OFFSET + 0x0c000000 )
+#define __phys_to_virt(x) ( (x) - 0x0c000000 + PAGE_OFFSET )
+
+#elif (RAM_IN_BANK_0 == RAM_IN_BANK_1) && \
+ (RAM_IN_BANK_2 + RAM_IN_BANK_3 == 0)
+
+/* Two identical banks */
+#define __virt_to_phys(x) \
+ ( ((x) < PAGE_OFFSET+RAM_IN_BANK_0) ? \
+ ((x) - PAGE_OFFSET + _DRAMBnk0) : \
+ ((x) - PAGE_OFFSET - RAM_IN_BANK_0 + _DRAMBnk1) )
+#define __phys_to_virt(x) \
+ ( ((x)&0x07ffffff) + \
+ (((x)&0x08000000) ? PAGE_OFFSET+RAM_IN_BANK_0 : PAGE_OFFSET) )
+#else
+
+/* It's more efficient for all other cases to use the function call */
+#undef __virt_to_phys__is_a_macro
+#undef __phys_to_virt__is_a_macro
+extern unsigned long __virt_to_phys(unsigned long vpage);
+extern unsigned long __phys_to_virt(unsigned long ppage);
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus__is_a_macro
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt__is_a_macro
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+
+#ifdef CONFIG_DISCONTIGMEM
+#error "CONFIG_DISCONTIGMEM will not work on S3C2400"
+/*
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation. Assuming all memory nodes have equal access
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are
+ * incidentally the same as virtual addresses.
+ *
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
+ */
+
+#define NR_NODES 4
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+ (((unsigned long)(addr) - 0xc0000000) >> 27)
+
+/*
+ * Given a physical address, convert it to a node id.
+ */
+#define PHYS_TO_NID(addr) KVADDR_TO_NID(__phys_to_virt(addr))
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr) \
+ NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr)))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(kvaddr) \
+ (((unsigned long)(kvaddr) & 0x07ffffff) >> PAGE_SHIFT)
+
+/*
+ * Given a kaddr, virt_to_page returns a pointer to the corresponding
+ * mem_map entry.
+ */
+#define virt_to_page(kaddr) \
+ (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+
+/*
+ * VALID_PAGE returns a non-zero value if given page pointer is valid.
+ * This assumes all node's mem_maps are stored within the node they refer to.
+ */
+#define VALID_PAGE(page) \
+({ unsigned int node = KVADDR_TO_NID(page); \
+ ( (node < NR_NODES) && \
+ ((unsigned)((page) - NODE_MEM_MAP(node)) < NODE_DATA(node)->node_size) ); \
+})
+
+#else
+
+#define PHYS_TO_NID(addr) (0)
+
+#endif
+#endif /* __ASM_ARCH_MEMORY_H */
rm -f asm
ln -s asm-$2 asm
rm -f asm-$2/arch
-ln -s arch-$3 asm-$2/arch
+
+if [ -z "$6" -o "$6" == "NULL" ] ; then
+ ln -s arch-$3 asm-$2/arch
+else
+ ln -s arch-$6 asm-$2/arch
+fi
if [ "$2" = "arm" ] ; then
rm -f asm-$2/proc
projects / u-boot / commitdiff