#include <asm/processor.h>
#include <ioports.h>
#include <asm/io.h>
+#include <asm/mmu.h>
#include <asm/fsl_law.h>
DECLARE_GLOBAL_DATA_PTR;
}
#endif
+/* We run cpu_init_early_f in AS = 1 */
+void cpu_init_early_f(void)
+{
+ set_tlb(0, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 1, 0, BOOKE_PAGESZ_4K, 0);
+
+ /* set up CCSR if we want it moved */
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ {
+ u32 temp;
+
+ set_tlb(0, CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_DEFAULT,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 1, 1, BOOKE_PAGESZ_4K, 0);
+
+ temp = in_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT);
+ out_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR >> 12);
+
+ temp = in_be32((volatile u32 *)CFG_CCSRBAR);
+ }
+#endif
+
+ init_laws();
+ invalidate_tlb(0);
+#ifdef CONFIG_FSL_INIT_TLBS
+ init_tlbs();
+#else
+ {
+ extern u32 tlb1_entry;
+ u32 *tmp = &tlb1_entry;
+ int i;
+ int num = tmp[2];
+
+ /* skip to actual table */
+ tmp += 3;
+
+ for (i = 0; i < num; i++, tmp += 4) {
+ mtspr(MAS0, tmp[0]);
+ mtspr(MAS1, tmp[1]);
+ mtspr(MAS2, tmp[2]);
+ mtspr(MAS3, tmp[3]);
+ asm volatile("isync;msync;tlbwe;isync");
+ }
+ }
+#endif
+}
+
/*
* Breathe some life into the CPU...
*
volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
extern void m8560_cpm_reset (void);
+ disable_tlb(14);
+ disable_tlb(15);
+
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
-#ifdef CONFIG_FSL_LAW
- init_laws();
-#endif
-
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
#endif
li r1,0x0f00
mtspr IVOR15,r1 /* 15: Debug */
-
- /*
- * After reset, CCSRBAR is located at CFG_CCSRBAR_DEFAULT, i.e.
- * 0xff700000-0xff800000. We need add a TLB1 entry for this 1MB
- * region before we can access any CCSR registers such as L2
- * registers, Local Access Registers,etc. We will also re-allocate
- * CFG_CCSRBAR_DEFAULT to CFG_CCSRBAR immediately after TLB1 setup.
- *
- * Please refer to board-specif directory for TLB1 entry configuration.
- * (e.g. board/<yourboard>/init.S)
- *
- */
- bl tlb1_entry
- mr r5,r0
- lwzu r4,0(r5) /* how many TLB1 entries we actually use */
- mtctr r4
-
-0: lwzu r6,4(r5)
- lwzu r7,4(r5)
- lwzu r8,4(r5)
- lwzu r9,4(r5)
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
- isync
- bdnz 0b
-
-1:
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /* Special sequence needed to update CCSRBAR itself */
- lis r4,CFG_CCSRBAR_DEFAULT@h
- ori r4,r4,CFG_CCSRBAR_DEFAULT@l
-
- lis r5,CFG_CCSRBAR@h
- ori r5,r5,CFG_CCSRBAR@l
- srwi r6,r5,12
- stw r6,0(r4)
- isync
-
- lis r5,0xffff
- ori r5,r5,0xf000
- lwz r5,0(r5)
- isync
-
- lis r3,CFG_CCSRBAR@h
- lwz r5,CFG_CCSRBAR@l(r3)
- isync
-#endif
-
-
- /* set up local access windows, defined at board/<boardname>/init.S */
- lis r7,CFG_CCSRBAR@h
- ori r7,r7,CFG_CCSRBAR@l
-
/* Clear and set up some registers. */
- li r0,0
- mtmsr r0
- li r0,0x0000
+ li r0,0x0000
lis r1,0xffff
mtspr DEC,r0 /* prevent dec exceptions */
mttbl r0 /* prevent fit & wdt exceptions */
mtspr ESR,r0 /* clear exception syndrome register */
mtspr MCSR,r0 /* machine check syndrome register */
mtxer r0 /* clear integer exception register */
- lis r1,0x0002 /* set CE bit (Critical Exceptions) */
- ori r1,r1,0x1200 /* set ME/DE bit */
- mtmsr r1 /* change MSR */
- isync
/* Enable Time Base and Select Time Base Clock */
lis r0,HID0_EMCP@h /* Enable machine check */
#if defined(CONFIG_ENABLE_36BIT_PHYS)
- ori r0,r0,(HID0_TBEN|HID0_ENMAS7)@l /* Enable Timebase & MAS7 */
-#else
- ori r0,r0,HID0_TBEN@l /* enable Timebase */
+ ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */
#endif
+ ori r0,r0,HID0_TBEN@l /* Enable Timebase */
mtspr HID0,r0
li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
mtspr DBCR0,r0
#endif
+ /* create a temp mapping in AS=1 to the boot window */
+ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ /* create a temp mapping in AS=1 to the stack */
+ lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
+
+ lis r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@h
+ ori r8,r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@l
+
+ lis r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ lis r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@h
+ ori r6,r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@l
+ lis r7,switch_as@h
+ ori r7,r7,switch_as@l
+
+ mtspr SPRN_SRR0,r7
+ mtspr SPRN_SRR1,r6
+ rfi
+
+switch_as:
/* L1 DCache is used for initial RAM */
/* Allocate Initial RAM in data cache.
stw r0,+12(r1) /* Save return addr (underflow vect) */
GET_GOT
+ bl cpu_init_early_f
+
+ /* switch back to AS = 0 */
+ lis r3,(MSR_CE|MSR_ME|MSR_DE)@h
+ ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
+ mtmsr r3
+ isync
+
bl cpu_init_f
bl board_init_f
isync
projects / u-boot / commitdiff