MIPS: clear TagLo select 2 during cache init

Current MIPS cores from Imagination Technologies use TagLo select 2 for
the data cache. The architecture requires that it is safe for software
to write to this register even if it isn't present, so take the trivial
option of clearing both selects 0 & 2.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

diff --git a/arch/mips/lib/cache_init.S b/arch/mips/lib/cache_init.S
index 04a36b2528849459ed62f9094db4137d4d4799cb..137d7283ffefb1f81a60b81fbfb5c559f798787e 100644 (file)
--- a/arch/mips/lib/cache_init.S
+++ b/arch/mips/lib/cache_init.S
@@ -138,6 +138,14 @@ LEAF(mips_cache_reset)
 
 #endif /* CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD */
 
+       /*
+        * The TagLo registers used depend upon the CPU implementation, but the
+        * architecture requires that it is safe for software to write to both
+        * TagLo selects 0 & 2 covering supported cases.
+        */
+       mtc0            zero, CP0_TAGLO
+       mtc0            zero, CP0_TAGLO, 2
+
        /*
         * The caches are probably in an indeterminate state, so we force good
         * parity into them by doing an invalidate for each line. If
@@ -151,7 +159,6 @@ LEAF(mips_cache_reset)
         * Initialize the I-cache first,
         */
        blez            t2, 1f
-       mtc0            zero, CP0_TAGLO
        PTR_LI          t0, INDEX_BASE
        PTR_ADDU        t1, t0, t2
        /* clear tag to invalidate */
@@ -169,7 +176,6 @@ LEAF(mips_cache_reset)
         * then initialize D-cache.
         */
 1:     blez            t3, 3f
-       mtc0            zero, CP0_TAGLO
        PTR_LI          t0, INDEX_BASE
        PTR_ADDU        t1, t0, t3
        /* clear all tags */