/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
- * Based on code provided from UDTech and AMCC
+ * Originally based on code provided from UDTech and AMCC
*
* See file CREDITS for list of people who contributed to this
* project.
#include <ppc_defs.h>
#define mtsdram_as(reg, value) \
- addi r4,0,reg ; \
- mtdcr memcfga,r4 ; \
- addis r4,0,value@h ; \
- ori r4,r4,value@l ; \
- mtdcr memcfgd,r4 ;
+ addi r4,0,reg ; \
+ mtdcr memcfga,r4 ; \
+ addis r4,0,value@h ; \
+ ori r4,r4,value@l ; \
+ mtdcr memcfgd,r4 ;
+
+#if defined(CONFIG_DDR_ECC)
+ .extern ecc_init
+#endif /* defined(CONFIG_DDR_ECC) */
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
+#if !defined(CFG_INIT_DCACHE_CS)
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
/*
- * DDR2 setup
+ * DDR2 SDRAM Controller Setup
*/
- /* Following the DDR Core Manual, here is the initialization */
-
- /* Step 1 */
-
- /* Step 2 */
-
- /* Step 3 */
-
- /* base=00000000, size=256MByte (6), mode=7 (n*10*8) */
- mtsdram_as(SDRAM_MB0CF, 0x00006701);
-
- /* SET SDRAM_MB1CF - Not enabled */
- mtsdram_as(SDRAM_MB1CF, 0x00000000);
-
- /* SET SDRAM_MB2CF - Not enabled */
- mtsdram_as(SDRAM_MB2CF, 0x00000000);
-
- /* SET SDRAM_MB3CF - Not enabled */
- mtsdram_as(SDRAM_MB3CF, 0x00000000);
-
- /* SDRAM_CLKTR: Adv Addr clock by 180 deg */
- mtsdram_as(SDRAM_CLKTR, 0x80000000);
-
- /* Refresh Time register (0x30) Refresh every 7.8125uS */
- mtsdram_as(SDRAM_RTR, 0x06180000);
+ /* Set Memory Bank Configuration Registers */
+ mtsdram_as(SDRAM_MB0CF, CFG_SDRAM0_MB0CF);
+ mtsdram_as(SDRAM_MB1CF, CFG_SDRAM0_MB1CF);
+ mtsdram_as(SDRAM_MB2CF, CFG_SDRAM0_MB2CF);
+ mtsdram_as(SDRAM_MB3CF, CFG_SDRAM0_MB3CF);
+
+ /* Set Memory Clock Timing Register */
+ mtsdram_as(SDRAM_CLKTR, CFG_SDRAM0_CLKTR);
+
+ /* Set Refresh Time Register */
+ mtsdram_as(SDRAM_RTR, CFG_SDRAM0_RTR);
+
+ /* Set SDRAM Timing Registers */
+ mtsdram_as(SDRAM_SDTR1, CFG_SDRAM0_SDTR1);
+ mtsdram_as(SDRAM_SDTR2, CFG_SDRAM0_SDTR2);
+ mtsdram_as(SDRAM_SDTR3, CFG_SDRAM0_SDTR3);
+
+ /* Set Mode and Extended Mode Registers */
+ mtsdram_as(SDRAM_MMODE, CFG_SDRAM0_MMODE);
+ mtsdram_as(SDRAM_MEMODE, CFG_SDRAM0_MEMODE);
+
+ /* Set Memory Controller Options 1 Register */
+ mtsdram_as(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1);
+
+ /* Set Manual Initialization Control Registers */
+ mtsdram_as(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0);
+ mtsdram_as(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1);
+ mtsdram_as(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2);
+ mtsdram_as(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3);
+ mtsdram_as(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4);
+ mtsdram_as(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5);
+ mtsdram_as(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6);
+ mtsdram_as(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7);
+ mtsdram_as(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8);
+ mtsdram_as(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9);
+ mtsdram_as(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10);
+ mtsdram_as(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11);
+ mtsdram_as(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12);
+ mtsdram_as(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13);
+ mtsdram_as(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14);
+ mtsdram_as(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15);
+
+ /* Set On-Die Termination Registers */
+ mtsdram_as(SDRAM_CODT, CFG_SDRAM0_CODT);
+ mtsdram_as(SDRAM_MODT0, CFG_SDRAM0_MODT0);
+ mtsdram_as(SDRAM_MODT1, CFG_SDRAM0_MODT1);
+
+ /* Set Write Timing Register */
+ mtsdram_as(SDRAM_WRDTR, CFG_SDRAM0_WRDTR);
- /* SDRAM_SDTR1 */
- mtsdram_as(SDRAM_SDTR1, 0x80201000);
-
- /* SDRAM_SDTR2 */
- mtsdram_as(SDRAM_SDTR2, 0x32204232);
+ /*
+ * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
+ * SDRAM0_MCOPT2[IPTR] = 1
+ */
+ mtsdram_as(SDRAM_MCOPT2, SDRAM_MCOPT2_SREN_EXIT | \
+ SDRAM_MCOPT2_IPTR_EXECUTE);
- /* SDRAM_SDTR3 */
- mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+ /*
+ * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
+ * completion of initialization.
+ *
+ * do {
+ * mfsdram(SDRAM_MCSTAT, val);
+ * } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
+ */
+ li r4,SDRAM_MCSTAT
+ lis r2,SDRAM_MCSTAT_MIC_COMP@h
+ ori r2,r2,SDRAM_MCSTAT_MIC_COMP@l
+0: mtdcr memcfga,r4
+ mfdcr r3,memcfgd
+ clrrwi r3,r3,31
+ cmpw cr7,r3,r2
+ bne+ cr7,0b
+
+ /* Set Delay Control Registers */
+ mtsdram_as(SDRAM_DLCR, CFG_SDRAM0_DLCR);
+ mtsdram_as(SDRAM_RDCC, CFG_SDRAM0_RDCC);
+ mtsdram_as(SDRAM_RQDC, CFG_SDRAM0_RQDC);
+ mtsdram_as(SDRAM_RFDC, CFG_SDRAM0_RFDC);
- mtsdram_as(SDRAM_MMODE, 0x00000442);
- mtsdram_as(SDRAM_MEMODE, 0x00000404);
+ /*
+ * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
+ *
+ * mcopt2 = mfsdram(SDRAM_MCOPT2);
+ */
+ li r4,SDRAM_MCOPT2
+ mtdcr memcfga,r4
+ mfdcr r3,memcfgd
- /* SDRAM0_MCOPT1 (0X20) No ECC Gen */
- mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+ /*
+ * mtsdram(SDRAM_MCOPT2, mcopt2 | SDRAM_MCOPT2_DCEN_ENABLE);
+ */
+ mtdcr memcfga,r4
+ oris r3,r3,SDRAM_MCOPT2_DCEN_ENABLE@h
+ ori r3,r3,SDRAM_MCOPT2_DCEN_ENABLE@l
+ mtdcr memcfgd,r3
- /* NOP */
- mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
- /* precharge 3 DDR clock cycle */
- mtsdram_as(SDRAM_INITPLR1, 0x81900400);
- /* EMR2 twr = 2tck */
- mtsdram_as(SDRAM_INITPLR2, 0x81020000);
- /* EMR3 twr = 2tck */
- mtsdram_as(SDRAM_INITPLR3, 0x81030000);
- /* EMR DLL ENABLE twr = 2tck */
- mtsdram_as(SDRAM_INITPLR4, 0x81010404);
- /* MR w/ DLL reset
- * Note: 5 is CL. May need to be changed
+#if defined(CONFIG_DDR_ECC)
+ /*
+ * ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
*/
- mtsdram_as(SDRAM_INITPLR5, 0x81000542);
- /* precharge 3 DDR clock cycle */
- mtsdram_as(SDRAM_INITPLR6, 0x81900400);
- /* Auto-refresh trfc = 26tck */
- mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
- /* Auto-refresh trfc = 26tck */
- mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
- /* Auto-refresh */
- mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
- /* Auto-refresh */
- mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
- /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
- mtsdram_as(SDRAM_INITPLR11, 0x81000442);
- mtsdram_as(SDRAM_INITPLR12, 0x81010780);
- mtsdram_as(SDRAM_INITPLR13, 0x81010400);
- mtsdram_as(SDRAM_INITPLR14, 0x00000000);
- mtsdram_as(SDRAM_INITPLR15, 0x00000000);
-
- /* SET MCIF0_CODT Die Termination On */
- mtsdram_as(SDRAM_CODT, 0x0080f837);
- mtsdram_as(SDRAM_MODT0, 0x01800000);
- mtsdram_as(SDRAM_MODT1, 0x00000000);
-
- mtsdram_as(SDRAM_WRDTR, 0x00000000);
-
- /* SDRAM0_MCOPT2 (0X21) Start initialization */
- mtsdram_as(SDRAM_MCOPT2, 0x20000000);
-
- /* Step 5 */
- lis r3,0x1 /* 400000 = wait 100ms */
- mtctr r3
-
-pll_wait:
- bdnz pll_wait
-
- /* Step 6 */
-
- /* SDRAM_DLCR */
- mtsdram_as(SDRAM_DLCR, 0x030000a5);
-
- /* SDRAM_RDCC */
- mtsdram_as(SDRAM_RDCC, 0x40000000);
-
- /* SDRAM_RQDC */
- mtsdram_as(SDRAM_RQDC, 0x80000038);
-
- /* SDRAM_RFDC */
- mtsdram_as(SDRAM_RFDC, 0x00000209);
-
- /* Enable memory controller */
- mtsdram_as(SDRAM_MCOPT2, 0x28000000);
-#endif /* #ifndef CONFIG_NAND_U_BOOT */
+ mflr r13
+ lis r3,CFG_SDRAM_BASE@h
+ ori r3,r3,CFG_SDRAM_BASE@l
+ lis r4,(CFG_MBYTES_SDRAM << 20)@h
+ ori r4,r4,(CFG_MBYTES_SDRAM << 20)@l
+ bl ecc_init
+ mtlr r13
+#endif /* defined(CONFIG_DDR_ECC) */
+#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+#endif /* !defined(CFG_INIT_DCACHE_CS) */
blr
/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
return;
}
+#if defined(CONFIG_NAND_U_BOOT)
long int initdram(int board_type)
{
return (CFG_MBYTES_SDRAM << 20);
}
+#endif /* defined(CONFIG_NAND_U_BOOT) */
#if defined(CFG_DRAM_TEST)
int testdram (void)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o cmd_pll.o memory.o
+COBJS = $(BOARD).o cmd_pll.o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
- * Based on code provided from Senao and AMCC
+ * Originally based on code provided from Senao and AMCC
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
-#include <config.h>
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#define mtsdram_as(reg, value) \
- addi r4,0,reg ; \
- mtdcr memcfga,r4 ; \
- addis r4,0,value@h ; \
- ori r4,r4,value@l ; \
- mtdcr memcfgd,r4 ;
-
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
-
- /*
- * DDR2 setup
- */
-
- /* Following the DDR Core Manual, here is the initialization */
-
- /* Step 1 */
-
- /* Step 2 */
-
- /* Step 3 */
-
- /* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
- mtsdram_as(SDRAM_MB0CF, 0x00005201);
-
- /* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
- mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
-
- /* SDRAM_CLKTR: Adv Addr clock by 180 deg */
- mtsdram_as(SDRAM_CLKTR,0x80000000);
-
- /* Refresh Time register (0x30) Refresh every 7.8125uS */
- mtsdram_as(SDRAM_RTR, 0x06180000);
-
- /* SDRAM_SDTR1 */
- mtsdram_as(SDRAM_SDTR1, 0x80201000);
-
- /* SDRAM_SDTR2 */
- mtsdram_as(SDRAM_SDTR2, 0x32204232);
-
- /* SDRAM_SDTR3 */
- mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
-
- mtsdram_as(SDRAM_MMODE, 0x00000442);
- mtsdram_as(SDRAM_MEMODE, 0x00000404);
-
- /* SDRAM0_MCOPT1 (0X20) No ECC Gen */
- mtsdram_as(SDRAM_MCOPT1, 0x04322000);
-
- /* NOP */
- mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
- /* precharge 3 DDR clock cycle */
- mtsdram_as(SDRAM_INITPLR1, 0x81900400);
- /* EMR2 twr = 2tck */
- mtsdram_as(SDRAM_INITPLR2, 0x81020000);
- /* EMR3 twr = 2tck */
- mtsdram_as(SDRAM_INITPLR3, 0x81030000);
- /* EMR DLL ENABLE twr = 2tck */
- mtsdram_as(SDRAM_INITPLR4, 0x81010404);
- /* MR w/ DLL reset
- * Note: 5 is CL. May need to be changed
- */
- mtsdram_as(SDRAM_INITPLR5, 0x81000542);
- /* precharge 3 DDR clock cycle */
- mtsdram_as(SDRAM_INITPLR6, 0x81900400);
- /* Auto-refresh trfc = 26tck */
- mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
- /* Auto-refresh trfc = 26tck */
- mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
- /* Auto-refresh */
- mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
- /* Auto-refresh */
- mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
- /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
- mtsdram_as(SDRAM_INITPLR11, 0x81000442);
- mtsdram_as(SDRAM_INITPLR12, 0x81010780);
- mtsdram_as(SDRAM_INITPLR13, 0x81010400);
- mtsdram_as(SDRAM_INITPLR14, 0x00000000);
- mtsdram_as(SDRAM_INITPLR15, 0x00000000);
-
- /* SET MCIF0_CODT Die Termination On */
- mtsdram_as(SDRAM_CODT, 0x0080f837);
- mtsdram_as(SDRAM_MODT0, 0x01800000);
-#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
- mtsdram_as(SDRAM_MODT1, 0x00000000);
-#endif
-
- mtsdram_as(SDRAM_WRDTR, 0x00000000);
-
- /* SDRAM0_MCOPT2 (0X21) Start initialization */
- mtsdram_as(SDRAM_MCOPT2, 0x20000000);
-
- /* Step 5 */
- lis r3,0x1 /* 400000 = wait 100ms */
- mtctr r3
-
-pll_wait:
- bdnz pll_wait
-
- /* Step 6 */
-
- /* SDRAM_DLCR */
- mtsdram_as(SDRAM_DLCR, 0x030000a5);
-
- /* SDRAM_RDCC */
- mtsdram_as(SDRAM_RDCC, 0x40000000);
-
- /* SDRAM_RQDC */
- mtsdram_as(SDRAM_RQDC, 0x80000038);
-
- /* SDRAM_RFDC */
- mtsdram_as(SDRAM_RFDC, 0x00000209);
-
- /* Enable memory controller */
- mtsdram_as(SDRAM_MCOPT2, 0x28000000);
-
blr
fdt_strerror(rc));
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+void sdram_init(void)
+{
+ return;
+}
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-void sdram_init(void)
-{
- return;
-}
-
-long int initdram(int board_type)
-{
- /*
- * Same as on Kilauea, Makalu generates exception 0x200
- * (machine check) after trap_init() in board_init_f,
- * when SDRAM is initialized here (late) and d-cache is
- * used earlier as INIT_RAM.
- * So for now, initialize DDR2 in init.S very early and
- * also use it for INIT_RAM. Then this exception doesn't
- * occur.
- */
-#if 0
- u32 val;
-
- /* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
- mtsdram(SDRAM_MB0CF, 0x00005201);
-
- /* SET SDRAM_MB1CF - Not enabled */
- mtsdram(SDRAM_MB1CF, 0x00000000);
-
- /* SET SDRAM_MB2CF - Not enabled */
- mtsdram(SDRAM_MB2CF, 0x00000000);
-
- /* SET SDRAM_MB3CF - Not enabled */
- mtsdram(SDRAM_MB3CF, 0x00000000);
-
- /* SDRAM_CLKTR: Adv Addr clock by 90 deg */
- mtsdram(SDRAM_CLKTR, 0x80000000);
-
- /* Refresh Time register (0x30) Refresh every 7.8125uS */
- mtsdram(SDRAM_RTR, 0x06180000);
-
- /* SDRAM_SDTR1 */
- mtsdram(SDRAM_SDTR1, 0x80201000);
-
- /* SDRAM_SDTR2 */
- mtsdram(SDRAM_SDTR2, 0x32204232);
-
- /* SDRAM_SDTR3 */
- mtsdram(SDRAM_SDTR3, 0x080b0d1a);
-
- mtsdram(SDRAM_MMODE, 0x00000442);
- mtsdram(SDRAM_MEMODE, 0x00000404);
-
- /* SDRAM0_MCOPT1 (0X20) No ECC Gen */
- mtsdram(SDRAM_MCOPT1, 0x04322000);
-
- /* NOP */
- mtsdram(SDRAM_INITPLR0, 0xa8380000);
- /* precharge 3 DDR clock cycle */
- mtsdram(SDRAM_INITPLR1, 0x81900400);
- /* EMR2 twr = 2tck */
- mtsdram(SDRAM_INITPLR2, 0x81020000);
- /* EMR3 twr = 2tck */
- mtsdram(SDRAM_INITPLR3, 0x81030000);
- /* EMR DLL ENABLE twr = 2tck */
- mtsdram(SDRAM_INITPLR4, 0x81010404);
- /* MR w/ DLL reset
- * Note: 5 is CL. May need to be changed
- */
- mtsdram(SDRAM_INITPLR5, 0x81000542);
- /* precharge 3 DDR clock cycle */
- mtsdram(SDRAM_INITPLR6, 0x81900400);
- /* Auto-refresh trfc = 26tck */
- mtsdram(SDRAM_INITPLR7, 0x8D080000);
- /* Auto-refresh trfc = 26tck */
- mtsdram(SDRAM_INITPLR8, 0x8D080000);
- /* Auto-refresh */
- mtsdram(SDRAM_INITPLR9, 0x8D080000);
- /* Auto-refresh */
- mtsdram(SDRAM_INITPLR10, 0x8D080000);
- /* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
- mtsdram(SDRAM_INITPLR11, 0x81000442);
- mtsdram(SDRAM_INITPLR12, 0x81010780);
- mtsdram(SDRAM_INITPLR13, 0x81010400);
- mtsdram(SDRAM_INITPLR14, 0x00000000);
- mtsdram(SDRAM_INITPLR15, 0x00000000);
-
- /* SET MCIF0_CODT Die Termination On */
- mtsdram(SDRAM_CODT, 0x0080f837);
- mtsdram(SDRAM_MODT0, 0x01800000);
- mtsdram(SDRAM_MODT1, 0x00000000);
-
- mtsdram(SDRAM_WRDTR, 0x00000000);
-
- /* SDRAM0_MCOPT2 (0X21) Start initialization */
- mtsdram(SDRAM_MCOPT2, 0x20000000);
-
- /* Step 5 */
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP);
-
- /* Step 6 */
-
- /* SDRAM_DLCR */
- mtsdram(SDRAM_DLCR, 0x030000a5);
-
- /* SDRAM_RDCC */
- mtsdram(SDRAM_RDCC, 0x40000000);
-
- /* SDRAM_RQDC */
- mtsdram(SDRAM_RQDC, 0x80000038);
-
- /* SDRAM_RFDC */
- mtsdram(SDRAM_RFDC, 0x00000209);
-
- /* Enable memory controller */
- mfsdram(SDRAM_MCOPT2, val);
- val |= SDRAM_MCOPT2_DCEN_ENABLE;
- mtsdram(SDRAM_MCOPT2, val);
-#endif
- return (CFG_MBYTES_SDRAM << 20);
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
- printf ("testdram\n");
-#if defined (CONFIG_NAND_U_BOOT)
- return 0;
-#endif
- uint *pstart = (uint *) 0x00000000;
- uint *pend = (uint *) 0x00001000;
- uint *p;
-
- for (p = pstart; p < pend; p++) {
- *p = 0xaaaaaaaa;
- }
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
-#if !defined (CONFIG_NAND_SPL)
- printf ("SDRAM test fails at: %08x\n", (uint) p);
-#endif
- return 1;
- }
- }
-
- for (p = pstart; p < pend; p++) {
- *p = 0x55555555;
- }
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
-#if !defined (CONFIG_NAND_SPL)
- printf ("SDRAM test fails at: %08x\n", (uint) p);
-#endif
- return 1;
- }
- }
-#if !defined (CONFIG_NAND_SPL)
- printf ("SDRAM test passed!!!\n");
-#endif
- return 0;
-}
-#endif
/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
#define CFG_MONITOR_BASE (TEXT_BASE)
/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer
- *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR 0x02000000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END (4 << 10)
+ * Initial RAM & Stack Pointer Configuration Options
+ *
+ * There are traditionally three options for the primordial
+ * (i.e. initial) stack usage on the 405-series:
+ *
+ * 1) On-chip Memory (OCM) (i.e. SRAM)
+ * 2) Data cache
+ * 3) SDRAM
+ *
+ * For the 405EX(r), there is no OCM, so we are left with (2) or (3)
+ * the latter of which is less than desireable since it requires
+ * setting up the SDRAM and ECC in assembly code.
+ *
+ * To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
+ * select on the External Bus Controller (EBC) and then select a
+ * value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
+ * physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
+ * select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
+ * physical SDRAM to use (3).
+ *-----------------------------------------------------------------------*/
+
+#define CFG_INIT_DCACHE_CS 4
+
+#if defined(CFG_INIT_DCACHE_CS)
+#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
+#else
+#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + (32 << 20)) /* 32 MiB */
+#endif /* defined(CFG_INIT_DCACHE_CS) */
+
+#define CFG_INIT_RAM_END (4 << 10) /* 4 KiB */
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-/* reserve some memory for POST and BOOT limit info */
-#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
-/* extra data in init-ram */
-#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
-#define CFG_POST_MAGIC (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
-#define CFG_POST_VAL (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
-#define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR /* for commproc.c */
+/*
+ * If the data cache is being used for the primordial stack and global
+ * data area, the POST word must be placed somewhere else. The General
+ * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
+ * its compare and mask register contents across reset, so it is used
+ * for the POST word.
+ */
+
+#if defined(CFG_INIT_DCACHE_CS)
+# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+# define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#else
+# define CFG_INIT_EXTRA_SIZE 16
+# define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
+# define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+# define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR
+#endif /* defined(CFG_INIT_DCACHE_CS) */
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#define CFG_SDRAM0_MB0CF_BASE (( 0 << 20) + CFG_SDRAM_BASE)
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+#define CFG_SDRAM0_MB0CF ((CFG_SDRAM0_MB0CF_BASE >> 3) | \
+ SDRAM_RXBAS_SDSZ_256MB | \
+ SDRAM_RXBAS_SDAM_MODE7 | \
+ SDRAM_RXBAS_SDBE_ENABLE)
+#define CFG_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
+#define CFG_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
+#define CFG_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
+#define CFG_SDRAM0_MCOPT1 0x04322000
+#define CFG_SDRAM0_MCOPT2 0x00000000
+#define CFG_SDRAM0_MODT0 0x01800000
+#define CFG_SDRAM0_MODT1 0x00000000
+#define CFG_SDRAM0_CODT 0x0080f837
+#define CFG_SDRAM0_RTR 0x06180000
+#define CFG_SDRAM0_INITPLR0 0xa8380000
+#define CFG_SDRAM0_INITPLR1 0x81900400
+#define CFG_SDRAM0_INITPLR2 0x81020000
+#define CFG_SDRAM0_INITPLR3 0x81030000
+#define CFG_SDRAM0_INITPLR4 0x81010404
+#define CFG_SDRAM0_INITPLR5 0x81000542
+#define CFG_SDRAM0_INITPLR6 0x81900400
+#define CFG_SDRAM0_INITPLR7 0x8D080000
+#define CFG_SDRAM0_INITPLR8 0x8D080000
+#define CFG_SDRAM0_INITPLR9 0x8D080000
+#define CFG_SDRAM0_INITPLR10 0x8D080000
+#define CFG_SDRAM0_INITPLR11 0x81000442
+#define CFG_SDRAM0_INITPLR12 0x81010780
+#define CFG_SDRAM0_INITPLR13 0x81010400
+#define CFG_SDRAM0_INITPLR14 0x00000000
+#define CFG_SDRAM0_INITPLR15 0x00000000
+#define CFG_SDRAM0_RQDC 0x80000038
+#define CFG_SDRAM0_RFDC 0x00000209
+#define CFG_SDRAM0_RDCC 0x40000000
+#define CFG_SDRAM0_DLCR 0x030000a5
+#define CFG_SDRAM0_CLKTR 0x80000000
+#define CFG_SDRAM0_WRDTR 0x00000000
+#define CFG_SDRAM0_SDTR1 0x80201000
+#define CFG_SDRAM0_SDTR2 0x32204232
+#define CFG_SDRAM0_SDTR3 0x080b0d1a
+#define CFG_SDRAM0_MMODE 0x00000442
+#define CFG_SDRAM0_MEMODE 0x00000404
+
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_CMD_SNTP
/* POST support */
-#define CONFIG_POST (CFG_POST_MEMORY | \
- CFG_POST_CACHE | \
+#define CONFIG_POST (CFG_POST_CACHE | \
CFG_POST_CPU | \
CFG_POST_ETHER | \
CFG_POST_I2C | \
/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
#define CFG_MONITOR_BASE (TEXT_BASE)
/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer
- *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR 0x02000000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END (4 << 10)
+ * Initial RAM & Stack Pointer Configuration Options
+ *
+ * There are traditionally three options for the primordial
+ * (i.e. initial) stack usage on the 405-series:
+ *
+ * 1) On-chip Memory (OCM) (i.e. SRAM)
+ * 2) Data cache
+ * 3) SDRAM
+ *
+ * For the 405EX(r), there is no OCM, so we are left with (2) or (3)
+ * the latter of which is less than desireable since it requires
+ * setting up the SDRAM and ECC in assembly code.
+ *
+ * To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
+ * select on the External Bus Controller (EBC) and then select a
+ * value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
+ * physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
+ * select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
+ * physical SDRAM to use (3).
+ *-----------------------------------------------------------------------*/
+
+#define CFG_INIT_DCACHE_CS 4
+
+#if defined(CFG_INIT_DCACHE_CS)
+#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
+#else
+#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + (32 << 20)) /* 32 MiB */
+#endif /* defined(CFG_INIT_DCACHE_CS) */
+
+#define CFG_INIT_RAM_END (4 << 10) /* 4 KiB */
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-/* reserve some memory for POST and BOOT limit info */
-#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
-/* extra data in init-ram */
-#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
-#define CFG_POST_MAGIC (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
-#define CFG_POST_VAL (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
-#define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR /* for commproc.c */
+/*
+ * If the data cache is being used for the primordial stack and global
+ * data area, the POST word must be placed somewhere else. The General
+ * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
+ * its compare and mask register contents across reset, so it is used
+ * for the POST word.
+ */
+
+#if defined(CFG_INIT_DCACHE_CS)
+# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+# define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#else
+# define CFG_INIT_EXTRA_SIZE 16
+# define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
+# define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+# define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR
+#endif /* defined(CFG_INIT_DCACHE_CS) */
/*-----------------------------------------------------------------------
* Serial Port
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM 256
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+
+#define CFG_SDRAM0_MB0CF_BASE (( 0 << 20) + CFG_SDRAM_BASE)
+#define CFG_SDRAM0_MB1CF_BASE ((128 << 20) + CFG_SDRAM_BASE)
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+#define CFG_SDRAM0_MB0CF ((CFG_SDRAM0_MB0CF_BASE >> 3) | \
+ SDRAM_RXBAS_SDSZ_128MB | \
+ SDRAM_RXBAS_SDAM_MODE2 | \
+ SDRAM_RXBAS_SDBE_ENABLE)
+#define CFG_SDRAM0_MB1CF ((CFG_SDRAM0_MB1CF_BASE >> 3) | \
+ SDRAM_RXBAS_SDSZ_128MB | \
+ SDRAM_RXBAS_SDAM_MODE2 | \
+ SDRAM_RXBAS_SDBE_ENABLE)
+#define CFG_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
+#define CFG_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
+#define CFG_SDRAM0_MCOPT1 0x04322000
+#define CFG_SDRAM0_MCOPT2 0x00000000
+#define CFG_SDRAM0_MODT0 0x01800000
+#define CFG_SDRAM0_MODT1 0x00000000
+#define CFG_SDRAM0_CODT 0x0080f837
+#define CFG_SDRAM0_RTR 0x06180000
+#define CFG_SDRAM0_INITPLR0 0xa8380000
+#define CFG_SDRAM0_INITPLR1 0x81900400
+#define CFG_SDRAM0_INITPLR2 0x81020000
+#define CFG_SDRAM0_INITPLR3 0x81030000
+#define CFG_SDRAM0_INITPLR4 0x81010404
+#define CFG_SDRAM0_INITPLR5 0x81000542
+#define CFG_SDRAM0_INITPLR6 0x81900400
+#define CFG_SDRAM0_INITPLR7 0x8D080000
+#define CFG_SDRAM0_INITPLR8 0x8D080000
+#define CFG_SDRAM0_INITPLR9 0x8D080000
+#define CFG_SDRAM0_INITPLR10 0x8D080000
+#define CFG_SDRAM0_INITPLR11 0x81000442
+#define CFG_SDRAM0_INITPLR12 0x81010780
+#define CFG_SDRAM0_INITPLR13 0x81010400
+#define CFG_SDRAM0_INITPLR14 0x00000000
+#define CFG_SDRAM0_INITPLR15 0x00000000
+#define CFG_SDRAM0_RQDC 0x80000038
+#define CFG_SDRAM0_RFDC 0x00000209
+#define CFG_SDRAM0_RDCC 0x40000000
+#define CFG_SDRAM0_DLCR 0x030000a5
+#define CFG_SDRAM0_CLKTR 0x80000000
+#define CFG_SDRAM0_WRDTR 0x00000000
+#define CFG_SDRAM0_SDTR1 0x80201000
+#define CFG_SDRAM0_SDTR2 0x32204232
+#define CFG_SDRAM0_SDTR3 0x080b0d1a
+#define CFG_SDRAM0_MMODE 0x00000442
+#define CFG_SDRAM0_MEMODE 0x00000404
/*-----------------------------------------------------------------------
* I2C
#define CONFIG_CMD_SNTP
/* POST support */
-#define CONFIG_POST (CFG_POST_MEMORY | \
- CFG_POST_CACHE | \
+#define CONFIG_POST (CFG_POST_CACHE | \
CFG_POST_CPU | \
CFG_POST_ETHER | \
CFG_POST_I2C | \
projects / u-boot / commitdiff