Enable the HS200 on RCar Gen3 platforms, since the SDHI core supports it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
+CONFIG_MMC_RENESAS_TUNING=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
+CONFIG_MMC_RENESAS_TUNING=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
+CONFIG_MMC_RENESAS_TUNING=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
+CONFIG_MMC_RENESAS_TUNING=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
+CONFIG_MMC_RENESAS_TUNING=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
+CONFIG_MMC_RENESAS_TUNING=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CFI_FLASH=y