powerpc/mpc85xx: Add board support for ucp1020

New QorIQ p1020 based board support from Arcturus Networks Inc.
http://www.arcturusnetworks.com/products/ucp1020/

Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
[York Sun: remove patman tags from commit message]
Reviewed-by: York Sun <yorksun@freescale.com>

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index b70d9e9e3265fe57cab7dcba6f542fa4dbc102cc..aff5fdb5146f884dd6a02b72bc2b3254e5061453 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -151,6 +151,9 @@ config TARGET_XPEDITE537X
 config TARGET_XPEDITE550X
        bool "Support xpedite550x"
 
+config TARGET_UCP1020
+       bool "Support uCP1020"
+
 endchoice
 
 source "board/freescale/b4860qds/Kconfig"
@@ -192,5 +195,6 @@ source "board/stx/stxssa/Kconfig"
 source "board/xes/xpedite520x/Kconfig"
 source "board/xes/xpedite537x/Kconfig"
 source "board/xes/xpedite550x/Kconfig"
+source "board/Arcturus/ucp1020/Kconfig"
 
 endmenu

diff --git a/board/Arcturus/ucp1020/Kconfig b/board/Arcturus/ucp1020/Kconfig
new file mode 100644 (file)
index 0000000..feca03a
--- /dev/null
+++ b/board/Arcturus/ucp1020/Kconfig
@@ -0,0 +1,44 @@
+if TARGET_UCP1020
+
+config SYS_BOARD
+       string
+       default "ucp1020"
+
+config SYS_VENDOR
+       string
+       default "Arcturus"
+
+config SYS_CONFIG_NAME
+       string
+       default "UCP1020"
+
+config SPI_FLASH
+       bool
+       default y
+
+config SPI_PCI
+       bool
+       default y
+
+choice
+       prompt "Target image select"
+
+config TARGET_UCP1020_NOR
+       bool "NOR flash u-boot image"
+
+config TARGET_UCP1020_SPIFLASH
+       bool "SPI flash u-boot image"
+
+endchoice
+
+if TARGET_UCP1020_SPIFLASH
+config UCBOOT
+       bool
+       default y
+
+config SPIFLASH
+       bool
+       default y
+endif
+
+endif

diff --git a/board/Arcturus/ucp1020/MAINTAINERS b/board/Arcturus/ucp1020/MAINTAINERS
new file mode 100644 (file)
index 0000000..e4a4718
--- /dev/null
+++ b/board/Arcturus/ucp1020/MAINTAINERS
@@ -0,0 +1,7 @@
+UCP1020 BOARD
+M:     Oleksandr Zhadan and Michael Durrant <arcsupport@arcturusnetworks.com>
+S:     Maintained
+F:     board/Arcturus/ucp1020/
+F:     include/configs/UCP1020.h
+F:     configs/UCP1020_defconfig
+F:     configs/UCP1020_SPIFLASH_defconfig

diff --git a/board/Arcturus/ucp1020/Makefile b/board/Arcturus/ucp1020/Makefile
new file mode 100644 (file)
index 0000000..35c88b9
--- /dev/null
+++ b/board/Arcturus/ucp1020/Makefile
@@ -0,0 +1,33 @@
+#
+# Copyright 2013-2015 Arcturus Networks, Inc.
+# based on board/freescale/p1_p2_rdb_pc/Makefile
+# original copyright follows:
+# Copyright 2010-2011 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+obj-y  += spl_minimal.o tlb.o law.o
+
+else
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+endif
+
+obj-y        += ucp1020.o
+obj-y        += ddr.o
+obj-y        += law.o
+obj-y        += tlb.o
+obj-y        += cmd_arc.o
+
+endif

diff --git a/board/Arcturus/ucp1020/README b/board/Arcturus/ucp1020/README
new file mode 100644 (file)
index 0000000..555c4ef
--- /dev/null
+++ b/board/Arcturus/ucp1020/README
@@ -0,0 +1,54 @@
+The uCP1020 product family (ucp1020) is an Arcturus Networks Inc. System on Modules
+product featuring a Freescale P1020 CPU, optionally populated with 1, 2 or 3 Gig-Ethernet PHYs,
+DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
+
+Information on the generic product family can be found here:
+       http://www.arcturusnetworks.com/products/ucp1020
+
+The UCP1020 several configurable options
+========================================
+
+- the selection of populated phy(s):
+       KSZ9031 (current default for eTSEC 1 and 3)
+
+- the selection of boot location:
+       SPI Flash or NOR flash
+
+The UCP1020 includes 2 default configurations
+=============================================
+NOR boot image:
+       configs/UCP1020_defconfig
+SPI boot image:
+       configs/UCP1020_SPIFLASH_defconfig
+
+The UCP1020 adds an additional command in cmd_arc.c to access and program
+SPI resident factory defaults for serial number, and 1, 2 or 3 Ethernet
+HW Addresses.
+
+
+Build example
+=============
+
+make distclean
+make UCP1020_defconfig
+make
+
+Default Scripts
+===============
+A default upgrade scripts is included in the default environment variable example:
+
+B$ run tftpflash
+
+Dual Environment
+================
+
+This build enables dual / failover environment environment.
+
+NOR Flash Partition declarations and scripts
+============================================
+Several scripts are available to allow TFTP of images and programming directly
+into defined NOR flash partitions. Examples:
+
+B$ run program0
+B$ run program1
+B$ run program2

diff --git a/board/Arcturus/ucp1020/cmd_arc.c b/board/Arcturus/ucp1020/cmd_arc.c
new file mode 100644 (file)
index 0000000..fa6b485
--- /dev/null
+++ b/board/Arcturus/ucp1020/cmd_arc.c
@@ -0,0 +1,231 @@
+/*
+ * Command for accessing Arcturus factory environment.
+ *
+ * Copyright 2013-2015 Arcturus Networks Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ *           by Oleksandr G Zhadan et al.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
+ *
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include <asm/io.h>
+
+#ifndef CONFIG_SF_DEFAULT_SPEED
+#   define CONFIG_SF_DEFAULT_SPEED     1000000
+#endif
+#ifndef CONFIG_SF_DEFAULT_MODE
+#   define CONFIG_SF_DEFAULT_MODE      SPI_MODE0
+#endif
+#ifndef CONFIG_SF_DEFAULT_CS
+#   define CONFIG_SF_DEFAULT_CS                0
+#endif
+#ifndef CONFIG_SF_DEFAULT_BUS
+#   define CONFIG_SF_DEFAULT_BUS       0
+#endif
+
+#define MAX_SERIAL_SIZE 15
+#define MAX_HWADDR_SIZE 17
+
+#define FIRM_ADDR1 (0x200 - sizeof(smac))
+#define FIRM_ADDR2 (0x400 - sizeof(smac))
+#define FIRM_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
+#define FIRM_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
+
+static struct spi_flash *flash;
+char smac[4][18];
+
+static int ishwaddr(char *hwaddr)
+{
+       if (strlen(hwaddr) == MAX_HWADDR_SIZE)
+               if (hwaddr[2] == ':' &&
+                   hwaddr[5] == ':' &&
+                   hwaddr[8] == ':' &&
+                   hwaddr[11] == ':' &&
+                   hwaddr[14] == ':')
+                       return 0;
+       return -1;
+}
+
+static int set_arc_product(int argc, char *const argv[])
+{
+       int err = 0;
+       char *mystrerr = "ERROR: Failed to save factory info in spi location";
+
+       if (argc != 5)
+               return -1;
+
+       /* Check serial number */
+       if (strlen(argv[1]) != MAX_SERIAL_SIZE)
+               return -1;
+
+       /* Check HWaddrs */
+       if (ishwaddr(argv[2]) || ishwaddr(argv[3]) || ishwaddr(argv[4]))
+               return -1;
+
+       strcpy(smac[3], argv[1]);
+       strcpy(smac[2], argv[2]);
+       strcpy(smac[1], argv[3]);
+       strcpy(smac[0], argv[4]);
+
+       flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+                               CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+
+       /*
+        * Save factory defaults
+        */
+
+       if (spi_flash_write(flash, FIRM_ADDR1, sizeof(smac), smac)) {
+               printf("%s: %s [1]\n", __func__, mystrerr);
+               err++;
+       }
+       if (spi_flash_write(flash, FIRM_ADDR2, sizeof(smac), smac)) {
+               printf("%s: %s [2]\n", __func__, mystrerr);
+               err++;
+       }
+
+       if (spi_flash_write(flash, FIRM_ADDR3, sizeof(smac), smac)) {
+               printf("%s: %s [3]\n", __func__, mystrerr);
+               err++;
+       }
+
+       if (spi_flash_write(flash, FIRM_ADDR4, sizeof(smac), smac)) {
+               printf("%s: %s [4]\n", __func__, mystrerr);
+               err++;
+       }
+
+       if (err == 4) {
+               printf("%s: %s [ALL]\n", __func__, mystrerr);
+               return -2;
+       }
+
+       return 0;
+}
+
+int get_arc_info(void)
+{
+       int location = 1;
+       char *myerr = "ERROR: Failed to read all 4 factory info spi locations";
+
+       flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+                               CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+
+       if (spi_flash_read(flash, FIRM_ADDR1, sizeof(smac), smac)) {
+               location++;
+               if (spi_flash_read(flash, FIRM_ADDR2, sizeof(smac), smac)) {
+                       location++;
+                       if (spi_flash_read(flash, FIRM_ADDR3, sizeof(smac),
+                                          smac)) {
+                               location++;
+                               if (spi_flash_read(flash, FIRM_ADDR4,
+                                                  sizeof(smac), smac)) {
+                                       printf("%s: %s\n", __func__, myerr);
+                                       return -2;
+                               }
+                       }
+               }
+       }
+       if (smac[3][0] != 0) {
+               if (location > 1)
+                       printf("Using region %d\n", location);
+               printf("SERIAL: ");
+               if (smac[3][0] == 0xFF) {
+                       printf("\t<not found>\n");
+               } else {
+                       printf("\t%s\n", smac[3]);
+                       setenv("SERIAL", smac[3]);
+               }
+       }
+
+       if (strcmp(smac[2], "00:00:00:00:00:00") == 0)
+               return 0;
+
+       printf("HWADDR0:");
+       if (smac[2][0] == 0xFF) {
+               printf("\t<not found>\n");
+       } else {
+               char *ret = getenv("ethaddr");
+
+               if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
+                       setenv("ethaddr", smac[2]);
+                       printf("\t%s (factory)\n", smac[2]);
+               } else {
+                       printf("\t%s\n", ret);
+               }
+       }
+
+       if (strcmp(smac[1], "00:00:00:00:00:00") == 0) {
+               setenv("eth1addr", smac[2]);
+               setenv("eth2addr", smac[2]);
+               return 0;
+       }
+
+       printf("HWADDR1:");
+       if (smac[1][0] == 0xFF) {
+               printf("\t<not found>\n");
+       } else {
+               char *ret = getenv("eth1addr");
+
+               if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
+                       setenv("eth1addr", smac[1]);
+                       printf("\t%s (factory)\n", smac[1]);
+               } else {
+                       printf("\t%s\n", ret);
+               }
+       }
+
+       if (strcmp(smac[0], "00:00:00:00:00:00") == 0) {
+               setenv("eth2addr", smac[1]);
+               return 0;
+       }
+
+       printf("HWADDR2:");
+       if (smac[0][0] == 0xFF) {
+               printf("\t<not found>\n");
+       } else {
+               char *ret = getenv("eth2addr");
+
+               if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
+                       setenv("eth2addr", smac[0]);
+                       printf("\t%s (factory)\n", smac[0]);
+               } else {
+                       printf("\t%s\n", ret);
+               }
+       }
+
+       return 0;
+}
+
+static int do_arc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+       const char *cmd;
+       int ret = -1;
+
+       cmd = argv[1];
+       --argc;
+       ++argv;
+
+       if (strcmp(cmd, "product") == 0) {
+               ret = set_arc_product(argc, argv);
+               goto done;
+       }
+       if (strcmp(cmd, "info") == 0) {
+               ret = get_arc_info();
+               goto done;
+       }
+done:
+       if (ret == -1)
+               return CMD_RET_USAGE;
+
+       return ret;
+}
+
+U_BOOT_CMD(arc, 6, 1, do_arc_cmd,
+          "Arcturus product command sub-system",
+          "product serial hwaddr0 hwaddr1 hwaddr2    - save Arcturus factory env\n"
+          "info                                      - show Arcturus factory env\n\n");

diff --git a/board/Arcturus/ucp1020/ddr.c b/board/Arcturus/ucp1020/ddr.c
new file mode 100644 (file)
index 0000000..42fbae0
--- /dev/null
+++ b/board/Arcturus/ucp1020/ddr.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
+#if defined(CONFIG_UCP1020) || defined(CONFIG_UCP1020T1)
+/*
+ * Micron MT41J128M16HA-15E
+ * */
+dimm_params_t ddr_raw_timing = {
+       .n_ranks = 1,
+       .rank_density = 536870912u,
+       .capacity = 536870912u,
+       .primary_sdram_width = 32,
+       .ec_sdram_width = 8,
+       .registered_dimm = 0,
+       .mirrored_dimm = 0,
+       .n_row_addr = 14,
+       .n_col_addr = 10,
+       .n_banks_per_sdram_device = 8,
+       .edc_config = 2,
+       .burst_lengths_bitmask = 0x0c,
+
+       .tckmin_x_ps = 1650,
+       .caslat_x = 0x7e << 4,  /* 5,6,7,8,9,10 */
+       .taa_ps = 14050,
+       .twr_ps = 15000,
+       .trcd_ps = 13500,
+       .trrd_ps = 75000,
+       .trp_ps = 13500,
+       .tras_ps = 40000,
+       .trc_ps = 49500,
+       .trfc_ps = 160000,
+       .twtr_ps = 75000,
+       .trtp_ps = 75000,
+       .refresh_rate_ps = 7800000,
+       .tfaw_ps = 30000,
+};
+
+#else
+#error Missing raw timing data for this board
+#endif
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+                           unsigned int controller_number,
+                           unsigned int dimm_number)
+{
+       const char dimm_model[] = "Fixed DDR on board";
+
+       if ((controller_number == 0) && (dimm_number == 0)) {
+               memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+               memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+               memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+       }
+
+       return 0;
+}
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
+
+#ifdef CONFIG_SYS_DDR_CS0_BNDS
+/* Fixed sdram init -- doesn't use serial presence detect. */
+phys_size_t fixed_sdram(void)
+{
+       sys_info_t sysinfo;
+       char buf[32];
+       size_t ddr_size;
+       fsl_ddr_cfg_regs_t ddr_cfg_regs = {
+               .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+               .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+               .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
+               .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
+               .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
+               .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
+#endif
+               .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
+               .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
+               .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
+               .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
+               .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+               .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+               .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
+               .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
+               .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+               .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
+               .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
+               .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
+               .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+               .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+               .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+               .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+               .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+               .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
+               .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+               .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+               .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+       };
+
+       get_sys_info(&sysinfo);
+       printf("Configuring DDR for %s MT/s data rate\n",
+              strmhz(buf, sysinfo.freq_ddrbus));
+
+       ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+       fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
+
+       if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+                        ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
+               printf("ERROR setting Local Access Windows for DDR\n");
+               return 0;
+       };
+
+       return ddr_size;
+}
+#endif
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+                          dimm_params_t *pdimm,
+                          unsigned int ctrl_num)
+{
+       int i;
+
+       popts->clk_adjust = 6;
+       popts->cpo_override = 0x1f;
+       popts->write_data_delay = 2;
+       popts->half_strength_driver_enable = 1;
+       /* Write leveling override */
+       popts->wrlvl_en = 1;
+       popts->wrlvl_override = 1;
+       popts->wrlvl_sample = 0xf;
+       popts->wrlvl_start = 0x8;
+       popts->trwt_override = 1;
+       popts->trwt = 0;
+
+       if (pdimm->primary_sdram_width == 64)
+               popts->data_bus_width = 0;
+       else if (pdimm->primary_sdram_width == 32)
+               popts->data_bus_width = 1;
+       else
+               printf("Error in DDR bus width configuration!\n");
+
+       for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+               popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+               popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+       }
+}

diff --git a/board/Arcturus/ucp1020/law.c b/board/Arcturus/ucp1020/law.c
new file mode 100644 (file)
index 0000000..7d40905
--- /dev/null
+++ b/board/Arcturus/ucp1020/law.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifdef CONFIG_VSC7385_ENET
+       SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
+       SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+       SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);

diff --git a/board/Arcturus/ucp1020/spl.c b/board/Arcturus/ucp1020/spl.c
new file mode 100644 (file)
index 0000000..236b0d0
--- /dev/null
+++ b/board/Arcturus/ucp1020/spl.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <nand.h>
+#include <i2c.h>
+#include <fsl_esdhc.h>
+#include <spi_flash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const u32 sysclk_tbl[] = {
+       66666000, 7499900, 83332500, 8999900,
+       99999000, 11111000, 12499800, 13333200
+};
+
+phys_size_t get_effective_memsize(void)
+{
+       return CONFIG_SYS_L2_SIZE;
+}
+
+void board_init_f(ulong bootflag)
+{
+       u32 plat_ratio, bus_clk;
+       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+       console_init_f();
+
+       /* Set pmuxcr to allow both i2c1 and i2c2 */
+       setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
+       setbits_be32(&gur->pmuxcr,
+                    in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+
+       /* Read back the register to synchronize the write. */
+       in_be32(&gur->pmuxcr);
+
+#ifdef CONFIG_SPL_SPI_BOOT
+       clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+#endif
+
+       /* initialize selected port with appropriate baud rate */
+       plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+       plat_ratio >>= 1;
+       bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+       gd->bus_clk = bus_clk;
+
+       NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+                    bus_clk / 16 / CONFIG_BAUDRATE);
+#ifdef CONFIG_SPL_MMC_BOOT
+       puts("\nSD boot...\n");
+#elif defined(CONFIG_SPL_SPI_BOOT)
+       puts("\nSPI Flash boot...\n");
+#endif
+
+       /* copy code to RAM and jump to it - this should not return */
+       /* NOTE - code has to be copied out of NAND buffer before
+        * other blocks can be read.
+        */
+       relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+       /* Pointer is writable since we allocated a register for it */
+       gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+       bd_t *bd;
+
+       memset(gd, 0, sizeof(gd_t));
+       bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+       memset(bd, 0, sizeof(bd_t));
+       gd->bd = bd;
+       bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+       bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+
+       probecpu();
+       get_clocks();
+       mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+                       CONFIG_SPL_RELOC_MALLOC_SIZE);
+
+#ifndef CONFIG_SPL_NAND_BOOT
+       env_init();
+#endif
+#ifdef CONFIG_SPL_MMC_BOOT
+       mmc_initialize(bd);
+#endif
+       /* relocate environment function pointers etc. */
+#ifdef CONFIG_SPL_NAND_BOOT
+       nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+                           (uchar *)CONFIG_ENV_ADDR);
+       gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
+       gd->env_valid = 1;
+#else
+       env_relocate();
+#endif
+
+#ifdef CONFIG_SYS_I2C
+       i2c_init_all();
+#else
+       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+       gd->ram_size = initdram(0);
+#ifdef CONFIG_SPL_NAND_BOOT
+       puts("Tertiary program loader running in sram...");
+#else
+       puts("Second program loader running in sram...\n");
+#endif
+
+#ifdef CONFIG_SPL_MMC_BOOT
+       mmc_boot();
+#elif defined(CONFIG_SPL_SPI_BOOT)
+       spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+       nand_boot();
+#endif
+}

diff --git a/board/Arcturus/ucp1020/spl_minimal.c b/board/Arcturus/ucp1020/spl_minimal.c
new file mode 100644 (file)
index 0000000..5bdefb8
--- /dev/null
+++ b/board/Arcturus/ucp1020/spl_minimal.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl_minimal.c
+ * original copyright follows:
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <linux/compiler.h>
+#include <asm/fsl_law.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong bootflag)
+{
+       u32 plat_ratio;
+       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+       set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+       set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+#endif
+
+       /* initialize selected port with appropriate baud rate */
+       plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+       plat_ratio >>= 1;
+       gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+       NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+                    gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+       puts("\nNAND boot... ");
+
+       /* copy code to RAM and jump to it - this should not return */
+       /* NOTE - code has to be copied out of NAND buffer before
+        * other blocks can be read.
+        */
+       relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+       puts("\nSecond program loader running in sram...");
+       nand_boot();
+}
+
+void putc(char c)
+{
+       if (c == '\n')
+               NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+       NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+       while (*str)
+               putc(*str++);
+}

diff --git a/board/Arcturus/ucp1020/tlb.c b/board/Arcturus/ucp1020/tlb.c
new file mode 100644 (file)
index 0000000..fd7134f
--- /dev/null
+++ b/board/Arcturus/ucp1020/tlb.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/tlb.c
+ * original copyright follows:
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+       /* TLB 0 - for temp stack in cache */
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+                     CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+                     CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+                     MAS3_SX | MAS3_SW | MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+                     CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+                     MAS3_SX | MAS3_SW | MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+                     CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+                     MAS3_SX | MAS3_SW | MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+
+       /* TLB 1 */
+       /* *I*** - Covers boot page */
+       SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I,
+                     0, 0, BOOKE_PAGESZ_4K, 1),
+
+       /* *I*G* - CCSRBAR */
+       SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                     0, 1, BOOKE_PAGESZ_1M, 1),
+
+#ifndef CONFIG_SPL_BUILD
+       /* W**G* - Flash/promjet, localbus */
+       /* This will be changed to *I*G* after relocation to RAM. */
+       SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+                     MAS3_SX | MAS3_SR, MAS2_W | MAS2_G,
+                     0, 2, BOOKE_PAGESZ_64M, 1),
+
+#ifdef CONFIG_PCI
+       /* *I*G* - PCI memory 1.5G */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                     0, 3, BOOKE_PAGESZ_1G, 1),
+
+       /* *I*G* - PCI I/O effective: 192K  */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                     0, 4, BOOKE_PAGESZ_256K, 1),
+#endif
+
+#ifdef CONFIG_VSC7385_ENET
+       /* *I*G - VSC7385 Switch */
+       SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                     0, 5, BOOKE_PAGESZ_1M, 1),
+#endif
+#endif /* not SPL */
+
+#ifdef CONFIG_SYS_NAND_BASE
+       /* *I*G - NAND */
+       SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                     0, 7, BOOKE_PAGESZ_1M, 1),
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT) || \
+       (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
+       /* *I*G - eSDHC/eSPI/NAND boot */
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+                     MAS3_SX | MAS3_SW | MAS3_SR, 0,
+                     0, 8, BOOKE_PAGESZ_1G, 1),
+
+#endif /* RAMBOOT/SPL */
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+       /* *I*G - L2SRAM */
+       SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_G,
+                     0, 11, BOOKE_PAGESZ_256K, 1),
+#if CONFIG_SYS_L2_SIZE >= (256 << 10)
+       SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+                     CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+                     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                     0, 12, BOOKE_PAGESZ_256K, 1)
+#endif
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);

diff --git a/board/Arcturus/ucp1020/ucp1020.c b/board/Arcturus/ucp1020/ucp1020.c
new file mode 100644 (file)
index 0000000..0fc2bac
--- /dev/null
+++ b/board/Arcturus/ucp1020/ucp1020.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ *           by Oleksandr G Zhadan et al.
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <hwconfig.h>
+#include <pci.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <ioports.h>
+#include <netdev.h>
+#include <micrel.h>
+#include <spi_flash.h>
+#include <mmc.h>
+#include <linux/ctype.h>
+#include <asm/fsl_serdes.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_lbc.h>
+#include <asm/mp.h>
+#include "ucp1020.h"
+
+void spi_set_speed(struct spi_slave *slave, uint hz)
+{
+       /* TO DO: It's actially have to be in spi/ */
+}
+
+/*
+ * To be compatible with cmd_gpio
+ */
+int name_to_gpio(const char *name)
+{
+       int gpio = 31 - simple_strtoul(name, NULL, 10);
+
+       if (gpio < 16)
+               gpio = -1;
+
+       return gpio;
+}
+
+void board_gpio_init(void)
+{
+       int i;
+       char envname[8], *val;
+
+       for (i = 0; i < GPIO_MAX_NUM; i++) {
+               sprintf(envname, "GPIO%d", i);
+               val = getenv(envname);
+               if (val) {
+                       char direction = toupper(val[0]);
+                       char level = toupper(val[1]);
+
+                       if (direction == 'I') {
+                               gpio_direction_input(i);
+                       } else {
+                               if (direction == 'O') {
+                                       if (level == '1')
+                                               gpio_direction_output(i, 1);
+                                       else
+                                               gpio_direction_output(i, 0);
+                               }
+                       }
+               }
+       }
+
+       val = getenv("PCIE_OFF");
+       if (val) {
+               gpio_direction_input(GPIO_PCIE1_EN);
+               gpio_direction_input(GPIO_PCIE2_EN);
+       } else {
+               gpio_direction_output(GPIO_PCIE1_EN, 1);
+               gpio_direction_output(GPIO_PCIE2_EN, 1);
+       }
+
+       val = getenv("SDHC_CDWP_OFF");
+       if (!val) {
+               ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+               setbits_be32(&gur->pmuxcr,
+                            (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
+       }
+}
+
+int board_early_init_f(void)
+{
+       return 0;       /* Just in case. Could be disable in config file */
+}
+
+int checkboard(void)
+{
+       printf("Board: %s\n", CONFIG_BOARDNAME_LOCAL);
+       board_gpio_init();
+       printf("SD/MMC: 4-bit Mode\n");
+
+       return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+       fsl_pcie_init_board(0);
+}
+#endif
+
+int board_early_init_r(void)
+{
+       const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+       const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+       /*
+        * Remap Boot flash region to caching-inhibited
+        * so that flash can be erased properly.
+        */
+
+       /* Flush d-cache and invalidate i-cache of any FLASH data */
+       flush_dcache();
+       invalidate_icache();
+
+       /* invalidate existing TLB entry for flash */
+       disable_tlb(flash_esel);
+
+       set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
+               MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, /* perms, wimge */
+               0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
+
+       return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+#if defined(CONFIG_PHY_MICREL_KSZ9021)
+       int regval;
+       static int cnt;
+
+       if (cnt++ == 0)
+               printf("PHYs address [");
+
+       if (phydev->addr == TSEC1_PHY_ADDR || phydev->addr == TSEC3_PHY_ADDR) {
+               regval =
+                   ksz9021_phy_extended_read(phydev,
+                                             MII_KSZ9021_EXT_STRAP_STATUS);
+               /*
+                * min rx data delay
+                */
+               ksz9021_phy_extended_write(phydev,
+                                          MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
+                                          0x6666);
+               /*
+                * max rx/tx clock delay, min rx/tx control
+                */
+               ksz9021_phy_extended_write(phydev,
+                                          MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
+                                          0xf6f6);
+               printf("0x%x", (regval & 0x1f));
+       } else {
+               printf("0x%x", (TSEC2_PHY_ADDR & 0x1f));
+       }
+       if (cnt == 3)
+               printf("] ");
+       else
+               printf(",");
+#endif
+
+#if defined(CONFIG_PHY_MICREL_KSZ9031_DEBUG)
+       regval = ksz9031_phy_extended_read(phydev, 2, 0x01, 0x4000);
+       if (regval >= 0)
+               printf(" (ADDR 0x%x) ", regval & 0x1f);
+#endif
+
+       return 0;
+}
+
+int last_stage_init(void)
+{
+       static char newkernelargs[256];
+       static u8 id1[16];
+       static u8 id2;
+       struct mmc *mmc;
+       char *sval, *kval;
+
+       if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) {
+               printf("Error reading i2c IDT6V49205B information!\n");
+       } else {
+               printf("IDT6V49205B(0x%02x): ready\n", id1[1]);
+               i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
+               if (!(id1[1] & 0x02)) {
+                       id1[1] |= 0x02;
+                       i2c_write(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
+                       asm("nop; nop");
+               }
+       }
+
+       if (i2c_read(CONFIG_SYS_I2C_NCT72_ADDR, 0xFE, 1, &id2, 1) < 0)
+               printf("Error reading i2c NCT72 information!\n");
+       else
+               printf("NCT72(0x%x): ready\n", id2);
+
+       kval = getenv("kernelargs");
+
+       mmc = find_mmc_device(0);
+       if (mmc)
+               if (!mmc_init(mmc)) {
+                       printf("MMC/SD card detected\n");
+                       if (kval) {
+                               int n = strlen(defkargs);
+                               char *tmp = strstr(kval, defkargs);
+
+                               *tmp = 0;
+                               strcpy(newkernelargs, kval);
+                               strcat(newkernelargs, " ");
+                               strcat(newkernelargs, mmckargs);
+                               strcat(newkernelargs, " ");
+                               strcat(newkernelargs, &tmp[n]);
+                               setenv("kernelargs", newkernelargs);
+                       } else {
+                               setenv("kernelargs", mmckargs);
+                       }
+               }
+       get_arc_info();
+
+       if (kval) {
+               sval = getenv("SERIAL");
+               if (sval) {
+                       strcpy(newkernelargs, "SN=");
+                       strcat(newkernelargs, sval);
+                       strcat(newkernelargs, " ");
+                       strcat(newkernelargs, kval);
+                       setenv("kernelargs", newkernelargs);
+               }
+       } else {
+               printf("Error reading kernelargs env variable!\n");
+       }
+
+       return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+       struct fsl_pq_mdio_info mdio_info;
+       struct tsec_info_struct tsec_info[4];
+#ifdef CONFIG_TSEC2
+       ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+       int num = 0;
+
+#ifdef CONFIG_TSEC1
+       SET_STD_TSEC_INFO(tsec_info[num], 1);
+       num++;
+#endif
+#ifdef CONFIG_TSEC2
+       SET_STD_TSEC_INFO(tsec_info[num], 2);
+       if (is_serdes_configured(SGMII_TSEC2)) {
+               if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_SGMII2_DIS)) {
+                       puts("eTSEC2 is in sgmii mode.\n");
+                       tsec_info[num].flags |= TSEC_SGMII;
+                       tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
+               }
+       }
+       num++;
+#endif
+#ifdef CONFIG_TSEC3
+       SET_STD_TSEC_INFO(tsec_info[num], 3);
+       num++;
+#endif
+
+       if (!num) {
+               printf("No TSECs initialized\n");
+               return 0;
+       }
+
+       mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+       mdio_info.name = DEFAULT_MII_NAME;
+
+       fsl_pq_mdio_init(bis, &mdio_info);
+
+       tsec_eth_init(bis, tsec_info, num);
+
+       return pci_eth_init(bis);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+       phys_addr_t base;
+       phys_size_t size;
+       const char *soc_usb_compat = "fsl-usb2-dr";
+       int err, usb1_off, usb2_off;
+
+       ft_cpu_setup(blob, bd);
+
+       base = getenv_bootm_low();
+       size = getenv_bootm_size();
+
+       fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+       FT_FSL_PCI_SETUP;
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
+       fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
+       /* Delete eLBC node as it is muxed with USB2 controller */
+       if (hwconfig("usb2")) {
+               const char *soc_elbc_compat = "fsl,p1020-elbc";
+               int off = fdt_node_offset_by_compatible(blob, -1,
+                                                       soc_elbc_compat);
+               if (off < 0) {
+                       printf
+                           ("WARNING: could not find compatible node %s: %s\n",
+                            soc_elbc_compat, fdt_strerror(off));
+                       return off;
+               }
+               err = fdt_del_node(blob, off);
+               if (err < 0) {
+                       printf("WARNING: could not remove %s: %s\n",
+                              soc_elbc_compat, fdt_strerror(err));
+               }
+               return err;
+       }
+#endif
+
+/* Delete USB2 node as it is muxed with eLBC */
+       usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat);
+       if (usb1_off < 0) {
+               printf("WARNING: could not find compatible node %s: %s.\n",
+                      soc_usb_compat, fdt_strerror(usb1_off));
+               return usb1_off;
+       }
+       usb2_off =
+           fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat);
+       if (usb2_off < 0) {
+               printf("WARNING: could not find compatible node %s: %s.\n",
+                      soc_usb_compat, fdt_strerror(usb2_off));
+               return usb2_off;
+       }
+       err = fdt_del_node(blob, usb2_off);
+       if (err < 0) {
+               printf("WARNING: could not remove %s: %s.\n",
+                      soc_usb_compat, fdt_strerror(err));
+       }
+       return 0;
+}
+#endif

diff --git a/board/Arcturus/ucp1020/ucp1020.h b/board/Arcturus/ucp1020/ucp1020.h
new file mode 100644 (file)
index 0000000..243459c
--- /dev/null
+++ b/board/Arcturus/ucp1020/ucp1020.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ *           by Oleksandr G Zhadan et al.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __UCP1020_H__
+#define __UCP1020_H__
+
+#define GPIO0          31
+#define GPIO1          30
+#define GPIO2          29
+#define GPIO3          28
+#define GPIO4          27
+#define GPIO5          26
+#define GPIO6          25
+#define GPIO7          24
+#define GPIO8          23
+#define GPIO9          22
+#define GPIO10         21
+#define GPIO11         20
+#define GPIO12         19
+#define GPIO13         18
+#define GPIO14         17
+#define GPIO15         16
+#define GPIO_MAX_NUM   16
+
+#define GPIO_SDHC_CD   GPIO8
+#define GPIO_SDHC_WP   GPIO9
+#define GPIO_USB_PCTL0 GPIO10
+#define GPIO_PCIE1_EN  GPIO11
+#define GPIO_PCIE2_EN  GPIO10
+#define GPIO_USB_PCTL1 GPIO11
+
+#define GPIO_WD                GPIO15
+
+static char *defkargs = "root=/dev/mtdblock1 rootfstype=cramfs ro";
+static char *mmckargs = "root=/dev/mmcblk0p1 rootwait rw";
+
+int get_arc_info(void);
+
+#endif

diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig
new file mode 100644 (file)
index 0000000..2ffb8da
--- /dev/null
+++ b/configs/UCP1020_SPIFLASH_defconfig
@@ -0,0 +1,6 @@
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_UCP1020=y
+CONFIG_TARGET_UCP1020_SPIFLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_UCP1020=y

diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig
new file mode 100644 (file)
index 0000000..61de360
--- /dev/null
+++ b/configs/UCP1020_defconfig
@@ -0,0 +1,5 @@
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_UCP1020=y
+CONFIG_SPI_FLASH=y
+CONFIG_UCP1020=y

diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
new file mode 100644 (file)
index 0000000..57e0c6c
--- /dev/null
+++ b/include/configs/UCP1020.h
@@ -0,0 +1,1027 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on include/configs/p1_p2_rdb_pc.h
+ * original copyright follows:
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * QorIQ uCP1020-xx boards configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_FSL_ELBC
+#define CONFIG_PCI
+#define CONFIG_PCIE1   /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2   /* PCIE controller 2 (slot 2) */
+#define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
+#define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
+
+#if defined(CONFIG_TARTGET_UCP1020T1)
+
+#define CONFIG_UCP1020_REV_1_3
+
+#define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
+#define CONFIG_P1020
+
+#define CONFIG_TSEC_ENET
+#define CONFIG_TSEC1
+#define CONFIG_TSEC3
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETHADDR         00:19:D3:FF:FF:FF
+#define CONFIG_ETH1ADDR                00:19:D3:FF:FF:FE
+#define CONFIG_ETH2ADDR                00:19:D3:FF:FF:FD
+#define CONFIG_IPADDR          10.80.41.229
+#define CONFIG_SERVERIP                10.80.41.227
+#define CONFIG_NETMASK         255.255.252.0
+#define CONFIG_ETHPRIME                "eTSEC3"
+
+#ifndef CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH       y
+#endif
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+
+#define CONFIG_MMC
+#define CONFIG_SYS_L2_SIZE     (256 << 10)
+
+#define CONFIG_LAST_STAGE_INIT
+
+#if !defined(CONFIG_DONGLE)
+#define CONFIG_SILENT_CONSOLE
+#endif
+
+#endif
+
+#if defined(CONFIG_TARGET_UCP1020)
+
+#define CONFIG_UCP1020
+#define CONFIG_UCP1020_REV_1_3
+
+#define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
+#define CONFIG_P1020
+
+#define CONFIG_TSEC_ENET
+#define CONFIG_TSEC1
+#define CONFIG_TSEC2
+#define CONFIG_TSEC3
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETHADDR         00:06:3B:FF:FF:FF
+#define CONFIG_ETH1ADDR                00:06:3B:FF:FF:FE
+#define CONFIG_ETH2ADDR                00:06:3B:FF:FF:FD
+#define CONFIG_IPADDR          192.168.1.81
+#define CONFIG_IPADDR1         192.168.1.82
+#define CONFIG_IPADDR2         192.168.1.83
+#define CONFIG_SERVERIP                192.168.1.80
+#define CONFIG_GATEWAYIP       102.168.1.1
+#define CONFIG_NETMASK         255.255.255.0
+#define CONFIG_ETHPRIME                "eTSEC1"
+
+#ifndef CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH       y
+#endif
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+
+#define CONFIG_MMC
+#define CONFIG_SYS_L2_SIZE     (256 << 10)
+
+#define CONFIG_LAST_STAGE_INIT
+
+#endif
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE           0xeff80000
+#endif
+#define CONFIG_SYS_TEXT_BASE_NOR       0xeff80000
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
+#endif
+
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE
+#define CONFIG_E500
+/* #define CONFIG_MPC85xx */
+
+#define CONFIG_MP
+
+#define CONFIG_FSL_LAW
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_CMD_SATA
+#define CONFIG_SATA_SIL
+#define CONFIG_SYS_SATA_MAX_DEVICE     2
+#define CONFIG_LIBATA
+#define CONFIG_LBA48
+
+#define CONFIG_SYS_CLK_FREQ    66666666
+#define CONFIG_DDR_CLK_FREQ    66666666
+
+#define CONFIG_HWCONFIG
+
+#define CONFIG_DTT_ADM1021     1       /* ADM1021 temp sensor support  */
+#define CONFIG_SYS_DTT_BUS_NUM 1       /* The I2C bus for DTT          */
+#define CONFIG_DTT_SENSORS     { 0, 1 }        /* Sensor index */
+/*
+ * ADM1021/NCT72 temp sensor configuration (see dtt/adm1021.c for details).
+ * there will be one entry in this array for each two (dummy) sensors in
+ * CONFIG_DTT_SENSORS.
+ *
+ * For uCP1020 module:
+ * - only one ADM1021/NCT72
+ * - i2c addr 0x41
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT output disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
+ */
+#define CONFIG_SYS_DTT_ADM1021 { { CONFIG_SYS_I2C_NCT72_ADDR, \
+                                        0x02, 0, 1, 0, 85, 1, 0, 85} }
+
+#define CONFIG_CMD_DTT
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE
+#define CONFIG_BTB
+
+#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init */
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x1fffffff
+#define CONFIG_PANIC_HANG      /* do not reset board on panic */
+
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
+
+/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
+       SPL code*/
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#endif
+
+/* DDR Setup */
+#define CONFIG_DDR_ECC_ENABLE
+#define CONFIG_SYS_FSL_DDR3
+#ifndef CONFIG_DDR_ECC_ENABLE
+#define CONFIG_SYS_DDR_RAW_TIMING
+#define CONFIG_DDR_SPD
+#endif
+#define CONFIG_SYS_SPD_BUS_NUM 1
+#undef CONFIG_FSL_DDR_INTERACTIVE
+
+#define CONFIG_SYS_SDRAM_SIZE_LAW      LAW_SIZE_512M
+#define CONFIG_CHIP_SELECTS_PER_CTRL   1
+#define CONFIG_SYS_SDRAM_SIZE          (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
+#define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
+#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_NUM_DDR_CONTROLLERS     1
+#define CONFIG_DIMM_SLOTS_PER_CTLR     1
+
+/* Default settings for DDR3 */
+#define CONFIG_SYS_DDR_CS0_BNDS                0x0000003f
+#define CONFIG_SYS_DDR_CS0_CONFIG      0x80014302
+#define CONFIG_SYS_DDR_CS0_CONFIG_2    0x00000000
+#define CONFIG_SYS_DDR_CS1_BNDS                0x0040007f
+#define CONFIG_SYS_DDR_CS1_CONFIG      0x80014302
+#define CONFIG_SYS_DDR_CS1_CONFIG_2    0x00000000
+
+#define CONFIG_SYS_DDR_DATA_INIT       0xdeadbeef
+#define CONFIG_SYS_DDR_INIT_ADDR       0x00000000
+#define CONFIG_SYS_DDR_INIT_EXT_ADDR   0x00000000
+#define CONFIG_SYS_DDR_MODE_CONTROL    0x00000000
+
+#define CONFIG_SYS_DDR_ZQ_CONTROL      0x89080600
+#define CONFIG_SYS_DDR_WRLVL_CONTROL   0x8655A608
+#define CONFIG_SYS_DDR_SR_CNTR         0x00000000
+#define CONFIG_SYS_DDR_RCW_1           0x00000000
+#define CONFIG_SYS_DDR_RCW_2           0x00000000
+#ifdef CONFIG_DDR_ECC_ENABLE
+#define CONFIG_SYS_DDR_CONTROL         0xE70C0000      /* Type = DDR3 & ECC */
+#else
+#define CONFIG_SYS_DDR_CONTROL         0xC70C0000      /* Type = DDR3 */
+#endif
+#define CONFIG_SYS_DDR_CONTROL_2       0x04401050
+#define CONFIG_SYS_DDR_TIMING_4                0x00220001
+#define CONFIG_SYS_DDR_TIMING_5                0x03402400
+
+#define CONFIG_SYS_DDR_TIMING_3                0x00020000
+#define CONFIG_SYS_DDR_TIMING_0                0x00330004
+#define CONFIG_SYS_DDR_TIMING_1                0x6f6B4846
+#define CONFIG_SYS_DDR_TIMING_2                0x0FA8C8CF
+#define CONFIG_SYS_DDR_CLK_CTRL                0x03000000
+#define CONFIG_SYS_DDR_MODE_1          0x40461520
+#define CONFIG_SYS_DDR_MODE_2          0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL                0x0C300000
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x7fff_ffff     DDR             Up to 2GB cacheable
+ * 0x8000_0000 0xdfff_ffff     PCI Express Mem 1G non-cacheable(PCIe * 2)
+ * 0xec00_0000 0xefff_ffff     NOR flash       Up to 64M non-cacheable CS0/1
+ * 0xf8f8_0000 0xf8ff_ffff     L2 SRAM         Up to 256K cacheable
+ *   (early boot only)
+ * 0xffc0_0000 0xffc3_ffff     PCI IO range    256k non-cacheable
+ * 0xffd0_0000 0xffd0_3fff     L1 for stack    16K cacheable
+ * 0xffe0_0000 0xffef_ffff     CCSR            1M non-cacheable
+ */
+
+/*
+ * Local Bus Definitions
+ */
+#define CONFIG_SYS_MAX_FLASH_SECT      512     /* 64M */
+#define CONFIG_SYS_FLASH_BASE          0xec000000
+
+#define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+       | BR_PS_16 | BR_V)
+
+#define CONFIG_FLASH_OR_PRELIM         0xfc000ff7
+
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS     45      /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* number of banks */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
+
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* stack in RAM */
+/* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS  CONFIG_SYS_INIT_RAM_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+/* Size of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                       GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN  (1024 * 1024)/* Reserved for malloc */
+
+#define CONFIG_SYS_PMC_BASE    0xff980000
+#define CONFIG_SYS_PMC_BASE_PHYS       CONFIG_SYS_PMC_BASE
+#define CONFIG_PMC_BR_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
+                                       BR_PS_8 | BR_V)
+#define CONFIG_PMC_OR_PRELIM   (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
+                                OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
+                                OR_GPCM_EAD)
+
+#define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
+#ifdef CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
+#define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
+#endif
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX              1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
+
+#define CONFIG_SYS_BAUDRATE_TABLE      \
+       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR + 0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x29} }
+#define CONFIG_SYS_SPD_BUS_NUM         1 /* For rom_loc and flash bank */
+
+#define CONFIG_RTC_DS1337
+#define CONFIG_SYS_RTC_DS1337_NOOSC
+#define CONFIG_SYS_I2C_RTC_ADDR                0x68
+#define CONFIG_SYS_I2C_PCA9557_ADDR    0x18
+#define CONFIG_SYS_I2C_NCT72_ADDR      0x4C
+#define CONFIG_SYS_I2C_IDT6V49205B     0x69
+
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_HARD_SPI
+#define CONFIG_FSL_ESPI
+
+#define CONFIG_SPI_FLASH_SST           1
+#define CONFIG_SPI_FLASH_STMICRO       1
+#define CONFIG_SPI_FLASH_WINBOND       1
+#define CONFIG_CMD_SF                  1
+#define CONFIG_CMD_SPI                 1
+#define CONFIG_SF_DEFAULT_SPEED                10000000
+#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+
+#if defined(CONFIG_PCI)
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 2, direct to uli, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME          "PCIe SLOT CON9"
+#define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS      0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT       0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS       0xffc10000
+#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
+
+/* controller 1, Slot 2, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME          "PCIe SLOT CON10"
+#define CONFIG_SYS_PCIE1_MEM_VIRT      0x80000000
+#define CONFIG_SYS_PCIE1_MEM_BUS       0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      0x80000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT       0xffc00000
+#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS       0xffc00000
+#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_E1000   /* Defind e1000 pci Ethernet card*/
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
+#define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif /* CONFIG_PCI */
+
+/*
+ * Environment
+ */
+#ifdef CONFIG_ENV_FIT_UCBOOT
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x20000)
+#define CONFIG_ENV_SIZE                0x20000
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+
+#else
+
+#define CONFIG_ENV_SPI_BUS     0
+#define CONFIG_ENV_SPI_CS      0
+#define CONFIG_ENV_SPI_MAX_HZ  10000000
+#define CONFIG_ENV_SPI_MODE    0
+
+#ifdef CONFIG_RAMBOOT_SPIFLASH
+
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE                0x3000          /* 12KB */
+#define CONFIG_ENV_OFFSET      0x2000          /* 8KB */
+#define CONFIG_ENV_SECT_SIZE   0x1000
+
+#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
+/* Address and size of Redundant Environment Sector    */
+#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
+#endif
+
+#elif defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#elif defined(CONFIG_SYS_RAMBOOT)
+#define CONFIG_ENV_IS_NOWHERE  /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE                0x2000
+
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_BASE                (CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR                (CONFIG_ENV_BASE + 0xC0000)
+#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
+/* Address and size of Redundant Environment Sector    */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#endif
+
+#endif
+
+#endif /* CONFIG_ENV_FIT_UCBOOT */
+
+#define CONFIG_LOADS_ECHO              /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_CRAMFS
+#define CONFIG_CRAMFS_CMDLINE
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
+#define CONFIG_USB_EHCI
+
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_STORAGE
+#endif
+#endif
+
+#undef CONFIG_WATCHDOG                 /* watchdog disabled */
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_MMC_SPI
+#define CONFIG_CMD_MMC_SPI
+#define CONFIG_GENERIC_MMC
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) || defined(CONFIG_FSL_SATA)
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Misc Extra Settings */
+#define CONFIG_CMD_GPIO                        1
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
+#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
+#define CONFIG_SYS_PROMPT      "B$ "           /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+       /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms tick */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial Memory for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#if defined(CONFIG_UCP1020_REV_1_2)
+#define CONFIG_PHY_MICREL_KSZ9021
+#elif defined(CONFIG_UCP1020_REV_1_3)
+#define CONFIG_PHY_MICREL_KSZ9031
+#else
+#error "UCP1020 module revision is not defined !!!"
+#endif
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_SERVERIP
+
+#define CONFIG_MII             /* MII PHY management */
+#define CONFIG_TSEC1_NAME      "eTSEC1"
+#define CONFIG_TSEC2_NAME      "eTSEC2"
+#define CONFIG_TSEC3_NAME      "eTSEC3"
+
+#define TSEC1_PHY_ADDR 4
+#define TSEC2_PHY_ADDR 0
+#define TSEC2_PHY_ADDR_SGMII   0x00
+#define TSEC3_PHY_ADDR 6
+
+#define TSEC1_FLAGS    (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS    (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_FLAGS    (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX   0
+#define TSEC2_PHYIDX   0
+#define TSEC3_PHYIDX   0
+
+#define CONFIG_PHY_GIGE        1       /* Include GbE speed/duplex detection */
+
+#endif
+
+#define CONFIG_HOSTNAME                UCP1020
+#define CONFIG_ROOTPATH                "/opt/nfsroot"
+#define CONFIG_BOOTFILE                "uImage"
+#define CONFIG_UBOOTPATH       u-boot.bin /* U-Boot image on TFTP server */
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR                1000000
+
+/*
+ * Autobooting
+ */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR       "\x1b"
+#define DEBUG_BOOTKEYS                 0
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#undef CONFIG_BOOTARGS
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, "   \
+                               "press \"<Esc>\" to stop\n", bootdelay
+
+#define CONFIG_BOOTARGS        /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE        115200
+
+#if defined(CONFIG_DONGLE)
+
+#define CONFIG_BOOTDELAY 1     /* autoboot after 1 seconds */
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+"bootcmd=run prog_spi_mbrbootcramfs\0"                                 \
+"bootfile=uImage\0"                                                    \
+"consoledev=ttyS0\0"                                                   \
+"cramfsfile=image.cramfs\0"                                            \
+"dtbaddr=0x00c00000\0"                                                 \
+"dtbfile=image.dtb\0"                                                  \
+"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                            \
+"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                          \
+"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                          \
+"fileaddr=0x01000000\0"                                                        \
+"filesize=0x00080000\0"                                                        \
+"flashmbr=sf probe 0; "                                                        \
+       "tftp $loadaddr $mbr; "                                         \
+       "sf erase $mbr_offset +$filesize; "                             \
+       "sf write $loadaddr $mbr_offset $filesize\0"                    \
+"flashrecovery=tftp $recoveryaddr $cramfsfile; "                       \
+       "protect off $nor_recoveryaddr +$filesize; "                    \
+       "erase $nor_recoveryaddr +$filesize; "                          \
+       "cp.b $recoveryaddr $nor_recoveryaddr $filesize; "              \
+       "protect on $nor_recoveryaddr +$filesize\0 "                    \
+"flashuboot=tftp $ubootaddr $ubootfile; "                              \
+       "protect off $nor_ubootaddr +$filesize; "                       \
+       "erase $nor_ubootaddr +$filesize; "                             \
+       "cp.b $ubootaddr $nor_ubootaddr $filesize; "                    \
+       "protect on $nor_ubootaddr +$filesize\0 "                       \
+"flashworking=tftp $workingaddr $cramfsfile; "                         \
+       "protect off $nor_workingaddr +$filesize; "                     \
+       "erase $nor_workingaddr +$filesize; "                           \
+       "cp.b $workingaddr $nor_workingaddr $filesize; "                \
+       "protect on $nor_workingaddr +$filesize\0 "                     \
+"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                          \
+"kerneladdr=0x01100000\0"                                              \
+"kernelfile=uImage\0"                                                  \
+"loadaddr=0x01000000\0"                                                        \
+"mbr=uCP1020d.mbr\0"                                                   \
+"mbr_offset=0x00000000\0"                                              \
+"mmbr=uCP1020Quiet.mbr\0"                                              \
+"mmcpart=0:2\0"                                                                \
+"mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "                      \
+       "mmc erase 1 1; "                                               \
+       "mmc write $loadaddr 1 1\0"                                     \
+"mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; "               \
+       "mmc erase 0x40 0x400; "                                        \
+       "mmc write $loadaddr 0x40 0x400\0"                              \
+"netdev=eth0\0"                                                                \
+"nor_recoveryaddr=0xEC0A0000\0"                                                \
+"nor_ubootaddr=0xEFF80000\0"                                           \
+"nor_workingaddr=0xECFA0000\0"                                         \
+"norbootrecovery=setenv bootargs $recoverybootargs"                    \
+       " console=$consoledev,$baudrate $othbootargs; "                 \
+       "run norloadrecovery; "                                         \
+       "bootm $kerneladdr - $dtbaddr\0"                                \
+"norbootworking=setenv bootargs $workingbootargs"                      \
+       " console=$consoledev,$baudrate $othbootargs; "                 \
+       "run norloadworking; "                                          \
+       "bootm $kerneladdr - $dtbaddr\0"                                \
+"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "                    \
+       "setenv cramfsaddr $nor_recoveryaddr; "                         \
+       "cramfsload $dtbaddr $dtbfile; "                                \
+       "cramfsload $kerneladdr $kernelfile\0"                          \
+"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "                     \
+       "setenv cramfsaddr $nor_workingaddr; "                          \
+       "cramfsload $dtbaddr $dtbfile; "                                \
+       "cramfsload $kerneladdr $kernelfile\0"                          \
+"prog_spi_mbr=run spi__mbr\0"                                          \
+"prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0"      \
+"prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; "        \
+       "run spi__cramfs\0"                                             \
+"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"  \
+       " console=$consoledev,$baudrate $othbootargs; "                 \
+       "tftp $rootfsaddr $rootfsfile; "                                \
+       "tftp $loadaddr $kernelfile; "                                  \
+       "tftp $dtbaddr $dtbfile; "                                      \
+       "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
+"ramdisk_size=120000\0"                                                        \
+"ramdiskfile=rootfs.ext2.gz.uboot\0"                                   \
+"recoveryaddr=0x02F00000\0"                                            \
+"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"          \
+"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
+       "mw.l 0xffe0f008 0x00400000\0"                                  \
+"rootfsaddr=0x02F00000\0"                                              \
+"rootfsfile=rootfs.ext2.gz.uboot\0"                                    \
+"rootpath=/opt/nfsroot\0"                                              \
+"spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; "               \
+       "protect off 0xeC000000 +$filesize; "                           \
+       "erase 0xEC000000 +$filesize; "                                 \
+       "cp.b $loadaddr 0xEC000000 $filesize; "                         \
+       "cmp.b $loadaddr 0xEC000000 $filesize; "                        \
+       "protect on 0xeC000000 +$filesize\0"                            \
+"spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; "               \
+       "protect off 0xeFF80000 +$filesize; "                           \
+       "erase 0xEFF80000 +$filesize; "                                 \
+       "cp.b $loadaddr 0xEFF80000 $filesize; "                         \
+       "cmp.b $loadaddr 0xEFF80000 $filesize; "                        \
+       "protect on 0xeFF80000 +$filesize\0"                            \
+"spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; "                  \
+       "sf probe 0; sf erase 0x8000 +$filesize; "                      \
+       "sf write $loadaddr 0x8000 $filesize\0"                         \
+"spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; "            \
+       "protect off 0xec0a0000 +$filesize; "                           \
+       "erase 0xeC0A0000 +$filesize; "                                 \
+       "cp.b $loadaddr 0xeC0A0000 $filesize; "                         \
+       "protect on 0xec0a0000 +$filesize\0"                            \
+"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "                      \
+       "sf probe 1; sf erase 0 +$filesize; "                           \
+       "sf write $loadaddr 0 $filesize\0"                              \
+"spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "                      \
+       "sf probe 0; sf erase 0 +$filesize; "                           \
+       "sf write $loadaddr 0 $filesize\0"                              \
+"tftpflash=tftpboot $loadaddr $uboot; "                                        \
+       "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
+       "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
+       "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
+       "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
+       "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
+"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                           \
+"ubootaddr=0x01000000\0"                                               \
+"ubootfile=u-boot.bin\0"                                               \
+"ubootd=u-boot4dongle.bin\0"                                           \
+"upgrade=run flashworking\0"                                           \
+"usb_phy_type=ulpi\0 "                                                 \
+"workingaddr=0x02F00000\0"                                             \
+"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
+
+#else
+
+#if defined(CONFIG_UCP1020T1)
+
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+"bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
+"bootfile=uImage\0"                                                    \
+"consoledev=ttyS0\0"                                                   \
+"cramfsfile=image.cramfs\0"                                            \
+"dtbaddr=0x00c00000\0"                                                 \
+"dtbfile=image.dtb\0"                                                  \
+"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                            \
+"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                          \
+"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                          \
+"fileaddr=0x01000000\0"                                                        \
+"filesize=0x00080000\0"                                                        \
+"flashmbr=sf probe 0; "                                                        \
+       "tftp $loadaddr $mbr; "                                         \
+       "sf erase $mbr_offset +$filesize; "                             \
+       "sf write $loadaddr $mbr_offset $filesize\0"                    \
+"flashrecovery=tftp $recoveryaddr $cramfsfile; "                       \
+       "protect off $nor_recoveryaddr +$filesize; "                    \
+       "erase $nor_recoveryaddr +$filesize; "                          \
+       "cp.b $recoveryaddr $nor_recoveryaddr $filesize; "              \
+       "protect on $nor_recoveryaddr +$filesize\0 "                    \
+"flashuboot=tftp $ubootaddr $ubootfile; "                              \
+       "protect off $nor_ubootaddr +$filesize; "                       \
+       "erase $nor_ubootaddr +$filesize; "                             \
+       "cp.b $ubootaddr $nor_ubootaddr $filesize; "                    \
+       "protect on $nor_ubootaddr +$filesize\0 "                       \
+"flashworking=tftp $workingaddr $cramfsfile; "                         \
+       "protect off $nor_workingaddr +$filesize; "                     \
+       "erase $nor_workingaddr +$filesize; "                           \
+       "cp.b $workingaddr $nor_workingaddr $filesize; "                \
+       "protect on $nor_workingaddr +$filesize\0 "                     \
+"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                          \
+"kerneladdr=0x01100000\0"                                              \
+"kernelfile=uImage\0"                                                  \
+"loadaddr=0x01000000\0"                                                        \
+"mbr=uCP1020.mbr\0"                                                    \
+"mbr_offset=0x00000000\0"                                              \
+"netdev=eth0\0"                                                                \
+"nor_recoveryaddr=0xEC0A0000\0"                                                \
+"nor_ubootaddr=0xEFF80000\0"                                           \
+"nor_workingaddr=0xECFA0000\0"                                         \
+"norbootrecovery=setenv bootargs $recoverybootargs"                    \
+       " console=$consoledev,$baudrate $othbootargs; "                 \
+       "run norloadrecovery; "                                         \
+       "bootm $kerneladdr - $dtbaddr\0"                                \
+"norbootworking=setenv bootargs $workingbootargs"                      \
+       " console=$consoledev,$baudrate $othbootargs; "                 \
+       "run norloadworking; "                                          \
+       "bootm $kerneladdr - $dtbaddr\0"                                \
+"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "                    \
+       "setenv cramfsaddr $nor_recoveryaddr; "                         \
+       "cramfsload $dtbaddr $dtbfile; "                                \
+       "cramfsload $kerneladdr $kernelfile\0"                          \
+"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "                     \
+       "setenv cramfsaddr $nor_workingaddr; "                          \
+       "cramfsload $dtbaddr $dtbfile; "                                \
+       "cramfsload $kerneladdr $kernelfile\0"                          \
+"othbootargs=quiet\0"                                                  \
+"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"  \
+       " console=$consoledev,$baudrate $othbootargs; "                 \
+       "tftp $rootfsaddr $rootfsfile; "                                \
+       "tftp $loadaddr $kernelfile; "                                  \
+       "tftp $dtbaddr $dtbfile; "                                      \
+       "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
+"ramdisk_size=120000\0"                                                        \
+"ramdiskfile=rootfs.ext2.gz.uboot\0"                                   \
+"recoveryaddr=0x02F00000\0"                                            \
+"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"          \
+"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
+       "mw.l 0xffe0f008 0x00400000\0"                                  \
+"rootfsaddr=0x02F00000\0"                                              \
+"rootfsfile=rootfs.ext2.gz.uboot\0"                                    \
+"rootpath=/opt/nfsroot\0"                                              \
+"silent=1\0"                                                           \
+"tftpflash=tftpboot $loadaddr $uboot; "                                        \
+       "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
+       "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
+       "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
+       "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
+       "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
+"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                           \
+"ubootaddr=0x01000000\0"                                               \
+"ubootfile=u-boot.bin\0"                                               \
+"upgrade=run flashworking\0"                                           \
+"workingaddr=0x02F00000\0"                                             \
+"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
+
+#else /* For Arcturus Modules */
+
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+"bootcmd=run norkernel\0"                                              \
+"bootfile=uImage\0"                                                    \
+"consoledev=ttyS0\0"                                                   \
+"dtbaddr=0x00c00000\0"                                                 \
+"dtbfile=image.dtb\0"                                                  \
+"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                            \
+"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                          \
+"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                          \
+"fileaddr=0x01000000\0"                                                        \
+"filesize=0x00080000\0"                                                        \
+"flashmbr=sf probe 0; "                                                        \
+       "tftp $loadaddr $mbr; "                                         \
+       "sf erase $mbr_offset +$filesize; "                             \
+       "sf write $loadaddr $mbr_offset $filesize\0"                    \
+"flashuboot=tftp $loadaddr $ubootfile; "                               \
+       "protect off $nor_ubootaddr0 +$filesize; "                      \
+       "erase $nor_ubootaddr0 +$filesize; "                            \
+       "cp.b $loadaddr $nor_ubootaddr0 $filesize; "                    \
+       "protect on $nor_ubootaddr0 +$filesize; "                       \
+       "protect off $nor_ubootaddr1 +$filesize; "                      \
+       "erase $nor_ubootaddr1 +$filesize; "                            \
+       "cp.b $loadaddr $nor_ubootaddr1 $filesize; "                    \
+       "protect on $nor_ubootaddr1 +$filesize\0 "                      \
+"format0=protect off $part0base +$part0size; "                         \
+       "erase $part0base +$part0size\0"                                \
+"format1=protect off $part1base +$part1size; "                         \
+       "erase $part1base +$part1size\0"                                \
+"format2=protect off $part2base +$part2size; "                         \
+       "erase $part2base +$part2size\0"                                \
+"format3=protect off $part3base +$part3size; "                         \
+       "erase $part3base +$part3size\0"                                \
+"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                          \
+"kerneladdr=0x01100000\0"                                              \
+"kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"                        \
+"kernelfile=uImage\0"                                                  \
+"loadaddr=0x01000000\0"                                                        \
+"mbr=uCP1020.mbr\0"                                                    \
+"mbr_offset=0x00000000\0"                                              \
+"netdev=eth0\0"                                                                \
+"nor_ubootaddr0=0xEC000000\0"                                          \
+"nor_ubootaddr1=0xEFF80000\0"                                          \
+"norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; "        \
+       "run norkernelload; "                                           \
+       "bootm $kerneladdr - $dtbaddr\0"                                \
+"norkernelload=mw.l $kerneladdr 0x0 0x00a00000; "                      \
+       "setenv cramfsaddr $part0base; "                                \
+       "cramfsload $dtbaddr $dtbfile; "                                \
+       "cramfsload $kerneladdr $kernelfile\0"                          \
+"part0base=0xEC100000\0"                                               \
+"part0size=0x00700000\0"                                               \
+"part1base=0xEC800000\0"                                               \
+"part1size=0x02000000\0"                                               \
+"part2base=0xEE800000\0"                                               \
+"part2size=0x00800000\0"                                               \
+"part3base=0xEF000000\0"                                               \
+"part3size=0x00F80000\0"                                               \
+"partENVbase=0xEC080000\0"                                             \
+"partENVsize=0x00080000\0"                                             \
+"program0=tftp part0-000000.bin; "                                     \
+       "protect off $part0base +$filesize; "                           \
+       "erase $part0base +$filesize; "                                 \
+       "cp.b $loadaddr $part0base $filesize; "                         \
+       "echo Verifying...; "                                           \
+       "cmp.b $loadaddr $part0base $filesize\0"                        \
+"program1=tftp part1-000000.bin; "                                     \
+       "protect off $part1base +$filesize; "                           \
+       "erase $part1base +$filesize; "                                 \
+       "cp.b $loadaddr $part1base $filesize; "                         \
+       "echo Verifying...; "                                           \
+       "cmp.b $loadaddr $part1base $filesize\0"                        \
+"program2=tftp part2-000000.bin; "                                     \
+       "protect off $part2base +$filesize; "                           \
+       "erase $part2base +$filesize; "                                 \
+       "cp.b $loadaddr $part2base $filesize; "                         \
+       "echo Verifying...; "                                           \
+       "cmp.b $loadaddr $part2base $filesize\0"                        \
+"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"  \
+       "  console=$consoledev,$baudrate $othbootargs; "                \
+       "tftp $rootfsaddr $rootfsfile; "                                \
+       "tftp $loadaddr $kernelfile; "                                  \
+       "tftp $dtbaddr $dtbfile; "                                      \
+       "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
+"ramdisk_size=120000\0"                                                        \
+"ramdiskfile=rootfs.ext2.gz.uboot\0"                                   \
+"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
+       "mw.l 0xffe0f008 0x00400000\0"                                  \
+"rootfsaddr=0x02F00000\0"                                              \
+"rootfsfile=rootfs.ext2.gz.uboot\0"                                    \
+"rootpath=/opt/nfsroot\0"                                              \
+"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "                      \
+       "sf probe 0; sf erase 0 +$filesize; "                           \
+       "sf write $loadaddr 0 $filesize\0"                              \
+"spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; "                        \
+       "protect off 0xeC000000 +$filesize; "                           \
+       "erase 0xEC000000 +$filesize; "                                 \
+       "cp.b $loadaddr 0xEC000000 $filesize; "                         \
+       "cmp.b $loadaddr 0xEC000000 $filesize; "                        \
+       "protect on 0xeC000000 +$filesize\0"                            \
+"tftpflash=tftpboot $loadaddr $uboot; "                                        \
+       "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
+       "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
+       "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
+       "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
+       "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
+"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                           \
+"ubootfile=u-boot.bin\0"                                               \
+"upgrade=run flashuboot\0"                                             \
+"usb_phy_type=ulpi\0 "                                                 \
+"boot_nfs= "                                                           \
+       "setenv bootargs root=/dev/nfs rw "                             \
+       "nfsroot=$serverip:$rootpath "                                  \
+       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+       "console=$consoledev,$baudrate $othbootargs;"                   \
+       "tftp $loadaddr $bootfile;"                                     \
+       "tftp $fdtaddr $fdtfile;"                                       \
+       "bootm $loadaddr - $fdtaddr\0"                                  \
+"boot_hd = "                                                           \
+       "setenv bootargs root=/dev/$bdev rw rootdelay=30 "              \
+       "console=$consoledev,$baudrate $othbootargs;"                   \
+       "usb start;"                                                    \
+       "ext2load usb 0:1 $loadaddr /boot/$bootfile;"                   \
+       "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"                     \
+       "bootm $loadaddr - $fdtaddr\0"                                  \
+"boot_usb_fat = "                                                      \
+       "setenv bootargs root=/dev/ram rw "                             \
+       "console=$consoledev,$baudrate $othbootargs "                   \
+       "ramdisk_size=$ramdisk_size;"                                   \
+       "usb start;"                                                    \
+       "fatload usb 0:2 $loadaddr $bootfile;"                          \
+       "fatload usb 0:2 $fdtaddr $fdtfile;"                            \
+       "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"                    \
+       "bootm $loadaddr $ramdiskaddr $fdtaddr\0 "                      \
+"boot_usb_ext2 = "                                                     \
+       "setenv bootargs root=/dev/ram rw "                             \
+       "console=$consoledev,$baudrate $othbootargs "                   \
+       "ramdisk_size=$ramdisk_size;"                                   \
+       "usb start;"                                                    \
+       "ext2load usb 0:4 $loadaddr $bootfile;"                         \
+       "ext2load usb 0:4 $fdtaddr $fdtfile;"                           \
+       "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"                   \
+       "bootm $loadaddr $ramdiskaddr $fdtaddr\0 "                      \
+"boot_nor = "                                                          \
+       "setenv bootargs root=/dev/$jffs2nor rw "                       \
+       "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
+       "bootm $norbootaddr - $norfdtaddr\0 "                           \
+"boot_ram = "                                                          \
+       "setenv bootargs root=/dev/ram rw "                             \
+       "console=$consoledev,$baudrate $othbootargs "                   \
+       "ramdisk_size=$ramdisk_size;"                                   \
+       "tftp $ramdiskaddr $ramdiskfile;"                               \
+       "tftp $loadaddr $bootfile;"                                     \
+       "tftp $fdtaddr $fdtfile;"                                       \
+       "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
+
+#endif
+#endif
+
+#endif /* __CONFIG_H */