Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_i...

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c
index 32711a17443cd4aa2072c0cabc5e5d80ae691ba9..5a26ae0317aa32256aec969c5addd8711bc31053 100644 (file)
--- a/cpu/mcf532x/cpu_init.c
+++ b/cpu/mcf532x/cpu_init.c
@@ -60,20 +60,6 @@ void cpu_init_f(void)
        scm2->pacrg = 0;
        scm1->pacrh = 0;
 
-       /* Setup Ports: */
-       switch (CFG_UART_PORT) {
-       case 0:
-               gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
-               break;
-       case 1:
-               gpio->par_uart =
-                   (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
-               break;
-       case 2:
-               gpio->par_uart = (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
-               break;
-       }
-
        /* Port configuration */
        gpio->par_cs = 0x3E;
 
@@ -124,3 +110,24 @@ int cpu_init_r(void)
 {
        return (0);
 }
+
+void uart_port_conf(void)
+{
+       volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+       /* Setup Ports: */
+       switch (CFG_UART_PORT) {
+       case 0:
+               gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
+               break;
+       case 1:
+               gpio->par_uart =
+                   (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
+               break;
+       case 2:
+               gpio->par_timer &= 0x0F;
+               gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
+               break;
+       }
+}
+

diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 39d4e18166bbf6574947d43f5953920b6b499204..bc7077de79e5d0d82c71a496e0d7bf5aa93d135d 100644 (file)
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -34,6 +34,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_MCFUART
+extern void uart_port_conf(void);
+
 int serial_init(void)
 {
        volatile uart_t *uart;
@@ -41,6 +43,8 @@ int serial_init(void)
 
        uart = (volatile uart_t *)(CFG_UART_BASE);
 
+       uart_port_conf();
+
        /* write to SICR: SIM2 = uart mode,dcd does not affect rx */
        uart->ucr = UART_UCR_RESET_RX;
        uart->ucr = UART_UCR_RESET_TX;