Changes for U-Boot 1.1.3:
======================================================================
+* Patches by Martin Krause, 22 Mar 2005:
+ - use TQM5200_auto as MAKEALL target for TQM5200 systems
+ - add support for SM501 graphics controller
+ - add support for graphic console on TQM5200
+ - add support for TQM5200 Rev 200
+ - cleanup, fix typo in include/configs/TQM5200.h
+
* Patch by Manfred Baral, 17 Mar 2005:
Fix typo
LIST_5xxx=" \
icecube_5100 icecube_5200 EVAL5200 PM520 \
- Total5100 Total5200 Total5200_Rev2 TQM5200_AA \
+ Total5100 Total5200 Total5200_Rev2 TQM5200_auto \
"
#########################################################################
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
- * (C) Copyright 2004
+ * (C) Copyright 2004-2005
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
#include <mpc5xxx.h>
#include <pci.h>
+#ifdef CONFIG_VIDEO_SM501
+#include <sm501.h>
+#endif
+
#if defined(CONFIG_MPC5200_DDR)
#include "mt46v16m16-75.h"
#else
#include "mt48lc16m16a2-75.h"
#endif
+
#ifdef CONFIG_PS2MULT
void ps2mult_early_init(void);
#endif
int checkboard (void)
{
#if defined (CONFIG_TQM5200_AA)
- puts ("Board: TQM5200-AA (TQ-Systems GmbH)\n");
+ puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
#elif defined (CONFIG_TQM5200_AB)
- puts ("Board: TQM5200-AB (TQ-Systems GmbH)\n");
+ puts ("Board: TQM5200-AB (TQ-Components GmbH)\n");
#elif defined (CONFIG_TQM5200_AC)
- puts ("Board: TQM5200-AC (TQ-Systems GmbH)\n");
+ puts ("Board: TQM5200-AC (TQ-Components GmbH)\n");
#elif defined (CONFIG_TQM5200)
- puts ("Board: TQM5200 (TQ-Systems GmbH)\n");
+ puts ("Board: TQM5200 (TQ-Components GmbH)\n");
#endif
#if defined (CONFIG_STK52XX)
puts (" on a STK52XX baseboard\n");
return 0;
}
#endif /* CONFIG_CS_AUTOCONF */
+
+#ifdef CONFIG_VIDEO_SM501
+
+#define DISPLAY_WIDTH 640
+#define DISPLAY_HEIGHT 480
+
+#ifdef CONFIG_VIDEO_SM501_8BPP
+#error CONFIG_VIDEO_SM501_8BPP not supported.
+#endif /* CONFIG_VIDEO_SM501_8BPP */
+
+#ifdef CONFIG_VIDEO_SM501_16BPP
+#error CONFIG_VIDEO_SM501_16BPP not supported.
+#endif /* CONFIG_VIDEO_SM501_16BPP */
+#ifdef CONFIG_VIDEO_SM501_32BPP
+static const SMI_REGS init_regs [] =
+{
+#if 0 /* CRT only */
+ {0x00004, 0x0},
+ {0x00048, 0x00021807},
+ {0x0004C, 0x10090a01},
+ {0x00054, 0x1},
+ {0x00040, 0x00021807},
+ {0x00044, 0x10090a01},
+ {0x00054, 0x0},
+ {0x80200, 0x00010000},
+ {0x80204, 0x0},
+ {0x80208, 0x0A000A00},
+ {0x8020C, 0x02fa027f},
+ {0x80210, 0x004a028b},
+ {0x80214, 0x020c01df},
+ {0x80218, 0x000201e9},
+ {0x80200, 0x00013306},
+#else /* panel + CRT */
+ {0x00004, 0x0},
+ {0x00048, 0x00021807},
+ {0x0004C, 0x091a0a01},
+ {0x00054, 0x1},
+ {0x00040, 0x00021807},
+ {0x00044, 0x091a0a01},
+ {0x00054, 0x0},
+ {0x80000, 0x0f013106},
+ {0x80004, 0xc428bb17},
+ {0x8000C, 0x00000000},
+ {0x80010, 0x0a000a00},
+ {0x80014, 0x02800000},
+ {0x80018, 0x01e00000},
+ {0x8001C, 0x00000000},
+ {0x80020, 0x01e00280},
+ {0x80024, 0x02fa027f},
+ {0x80028, 0x004a028b},
+ {0x8002C, 0x020c01df},
+ {0x80030, 0x000201e9},
+ {0x80200, 0x00010000},
+#endif
+ {0, 0}
+};
+#endif /* CONFIG_VIDEO_SM501_32BPP */
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+/*
+ * Return text to be printed besides the logo.
+ */
+void video_get_info_str (int line_number, char *info)
+{
+ if (line_number == 1) {
+#if defined (CONFIG_TQM5200_AA)
+ strcpy (info, " Board: TQM5200-AA (TQ-Components GmbH)");
+#elif defined (CONFIG_TQM5200_AB)
+ strcpy (info, " Board: TQM5200-AB (TQ-Components GmbH)");
+#elif defined (CONFIG_TQM5200_AC)
+ strcpy (info, " Board: TQM5200-AC (TQ-Components GmbH)");
+#elif defined (CONFIG_TQM5200)
+ strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
+#else
+#error No supported board selected
+#endif
+#if defined (CONFIG_STK52XX)
+ } else if (line_number == 2) {
+ strcpy (info, " on a STK52XX baseboard");
+#endif
+ }
+ else {
+ info [0] = '\0';
+ }
+}
+#endif
+
+/*
+ * Returns SM501 register base address. First thing called in the driver.
+ */
+unsigned int board_video_init (void)
+{
+ return SM501_MMIO_BASE;
+}
+
+/*
+ * Returns SM501 framebuffer address
+ */
+unsigned int board_video_get_fb (void)
+{
+ return SM501_FB_BASE;
+}
+
+/*
+ * Called after initializing the SM501 and before clearing the screen.
+ */
+void board_validate_screen (unsigned int base)
+{
+}
+
+/*
+ * Return a pointer to the initialization sequence.
+ */
+const SMI_REGS *board_get_regs (void)
+{
+ return init_regs;
+}
+
+int board_get_width (void)
+{
+ return DISPLAY_WIDTH;
+}
+
+int board_get_height (void)
+{
+ return DISPLAY_HEIGHT;
+}
+
+#endif /* CONFIG_VIDEO_SM501 */
PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx -DCONFIG_E500 -ffixed-r2 -ffixed-r29 -Wa,-me500 -msoft-float -mno-string
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx -DCONFIG_E500 -ffixed-r2 -ffixed-r29 -Wa,-me500 -msoft-float -mno-string
sed13806.o sed156x.o \
serial.o serial_max3100.o \
serial_pl010.o serial_pl011.o serial_xuartlite.o \
- sl811_usb.o smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
+ sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
+ status_led.o sym53c8xx.o \
ti_pci1410a.o tigon3.o \
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
videomodes.o w83c553f.o
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT p.aubert@staubli.com
+ *
+ * (C) Copyright 2005
+ * Martin Krause TQ-Systems GmbH martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Basic video support for SMI SM501 "Voyager" graphic controller
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_VIDEO_SM501
+
+#include <video_fb.h>
+#include <sm501.h>
+
+#define read8(ptrReg) \
+ *(volatile unsigned char *)(sm501.isaBase + ptrReg)
+
+#define write8(ptrReg,value) \
+ *(volatile unsigned char *)(sm501.isaBase + ptrReg) = value
+
+#define read16(ptrReg) \
+ (*(volatile unsigned short *)(sm501.isaBase + ptrReg))
+
+#define write16(ptrReg,value) \
+ (*(volatile unsigned short *)(sm501.isaBase + ptrReg) = value)
+
+#define read32(ptrReg) \
+ (*(volatile unsigned int *)(sm501.isaBase + ptrReg))
+
+#define write32(ptrReg, value) \
+ (*(volatile unsigned int *)(sm501.isaBase + ptrReg) = value)
+
+GraphicDevice sm501;
+
+/*-----------------------------------------------------------------------------
+ * SmiSetRegs --
+ *-----------------------------------------------------------------------------
+ */
+static void SmiSetRegs (void)
+{
+ /*
+ * The content of the chipset register depends on the board (clocks,
+ * ...)
+ */
+ const SMI_REGS *preg = board_get_regs ();
+ while (preg->Index) {
+ write32 (preg->Index, preg->Value);
+ /*
+ * Insert a delay between
+ */
+ udelay (1000);
+ preg ++;
+ }
+}
+
+/*-----------------------------------------------------------------------------
+ * video_hw_init --
+ *-----------------------------------------------------------------------------
+ */
+void *video_hw_init (void)
+{
+ unsigned int *vm, i;
+
+ memset (&sm501, 0, sizeof (GraphicDevice));
+
+ /*
+ * Initialization of the access to the graphic chipset Retreive base
+ * address of the chipset (see board/RPXClassic/eccx.c)
+ */
+ if ((sm501.isaBase = board_video_init ()) == 0) {
+ return (NULL);
+ }
+
+ if ((sm501.frameAdrs = board_video_get_fb ()) == 0) {
+ return (NULL);
+ }
+
+ sm501.winSizeX = board_get_width ();
+ sm501.winSizeY = board_get_height ();
+
+#if defined(CONFIG_VIDEO_SM501_8BPP)
+ sm501.gdfIndex = GDF__8BIT_INDEX;
+ sm501.gdfBytesPP = 1;
+
+#elif defined(CONFIG_VIDEO_SM501_16BPP)
+ sm501.gdfIndex = GDF_16BIT_565RGB;
+ sm501.gdfBytesPP = 2;
+
+#elif defined(CONFIG_VIDEO_SM501_32BPP)
+ sm501.gdfIndex = GDF_32BIT_X888RGB;
+ sm501.gdfBytesPP = 4;
+#else
+#error Unsupported SM501 BPP
+#endif
+
+ sm501.memSize = sm501.winSizeX * sm501.winSizeY * sm501.gdfBytesPP;
+
+ /* Load Smi registers */
+ SmiSetRegs ();
+
+ /* (see board/RPXClassic/RPXClassic.c) */
+ board_validate_screen (sm501.isaBase);
+
+ /* Clear video memory */
+ i = sm501.memSize/4;
+ vm = (unsigned int *)sm501.frameAdrs;
+ while(i--)
+ *vm++ = 0;
+
+ return (&sm501);
+}
+
+/*-----------------------------------------------------------------------------
+ * video_set_lut --
+ *-----------------------------------------------------------------------------
+ */
+void video_set_lut (
+ unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ )
+{
+}
+
+#endif /* CONFIG_VIDEO_SM501 */
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT p.aubert@staubli.com
+ *
+ * (C) Copyright 2005
+ * Martin Krause TQ-Systems GmbH martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Basic video support for SMI SM501 "Voyager" graphic controller
+ */
+
+#ifndef _SM501_H_
+#define _SM501_H_
+
+typedef struct {
+ unsigned int Index;
+ unsigned int Value;
+} SMI_REGS;
+
+/* Board specific functions */
+unsigned int board_video_init (void);
+void board_validate_screen (unsigned int base);
+const SMI_REGS *board_get_regs (void);
+int board_get_width (void);
+int board_get_height (void);
+unsigned int board_video_get_fb (void);
+
+#endif /* _SM501_H_ */
OR_SCY_15_CLK | OR_EHTR | OR_TRLX)
#define CFG_BR2_PRELIM ((CFG_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_UPMB | BR_V )
-#define CFG_OR2_PRELIM (((-CFG_NAND_SIZE) & OR_AM_MSK) | OR_BI )
+#define CFG_OR2_PRELIM (((-CFG_NAND_SIZE) & OR_AM_MSK) | OR_BI )
/*
* BR3 and OR3 (SDRAM)
/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * (C) Copyright 2004
+ * (C) Copyright 2004-2005
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
+#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
#define CONFIG_BOARD_EARLY_INIT_R
#endif /* CONFIG_STK52XX */
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
*/
#ifdef CONFIG_STK52XX
#define CONFIG_PCI 1
-#elif
-#define CONFIG_PCI 0
-#endif
#define CONFIG_PCI_PNP 1
/* #define CONFIG_PCI_SCAN_SHOW 1 */
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#ifdef CONFIG_STK52XX
+#ifdef CONFIG_PCI
#define ADD_PCI_CMD CFG_CMD_PCI
-#elif
+#else
#define ADD_PCI_CMD 0
#endif
-#else /* MPC5100 */
-
-#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#endif
+#ifdef CONFIG_VIDEO
+#define ADD_BMP_CMD CFG_CMD_BMP
+#else
+#define ADD_BMP_CMD 0
#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
/* USB */
#ifdef CONFIG_STK52XX
* Supported commands
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_BMP_CMD | \
ADD_IDE_CMD | \
ADD_PCI_CMD | \
ADD_USB_CMD | \
#undef CONFIG_BOOTARGS
#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX "-AA"
+# define CONFIG_U_BOOT_SUFFIX "-AA\0"
#elif defined (CONFIG_TQM5200_AB)
# define CONFIG_U_BOOT_SUFFIX "-AB\0"
#elif defined (CONFIG_TQM5200_AC)
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#if defined (CONFIG_MINIFAP)
-#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+#ifdef CONFIG_TQM5200_REV100
+#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
#else
-#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
#endif
/*
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE 0x02000000 /* 32 MByte */
-#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
#if !defined(CFG_LOWBOOT)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
* use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
* Bit 0 (mask: 0x80000000): 1
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
- * 00 -> No Alternatives, I2C1 is used for onboard EEPROM
- * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
- * EEPROM
+ * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ * Set for rev 100 modules with an onboard EEPROM (because,
+ * there I2C1 is used as I2C bus)
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ * Set for rev 200 modules
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
* use PSC6:
* on STK52xx:
- * use as UART. Pins PSC6_0 to PSC6_3 are used.
- Bits 9:11 (mask: 0x00700000):
+ * use as UART. Pins PSC6_0 to PSC6_3 are used.
+ * Bits 9:11 (mask: 0x00700000):
* 101 -> PSC6 : Extended POST test is not available
* on MINI-FAP and TQM5200_IB:
- * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
- * 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible.
- * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
- * tests.
+ * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ * 000 -> PSC6 could not be used as UART, CODEC or IrDA
+ * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ * tests.
*/
#if defined (CONFIG_MINIFAP)
-#define CFG_GPS_PORT_CONFIG 0x91300004
+# define CFG_GPS_PORT_CONFIG 0x91000004
#elif defined (CONFIG_STK52XX)
-#define CFG_GPS_PORT_CONFIG 0x81500004
-#else
-#define CFG_GPS_PORT_CONFIG 0x81300004
+# if defined (CONFIG_TQM5200_REV100)
+# define CFG_GPS_PORT_CONFIG 0x81500004
+# else
+# define CFG_GPS_PORT_CONFIG 0x91500004
+# endif
+#else /* TMQ5200_IP */
+# define CFG_GPS_PORT_CONFIG 0x81000004
#endif
/*
*/
#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
defined (CONFIG_CS_AUTOCONF)
-#define CFG_CS1_START 0xE0000000
+#define SM501_FB_BASE 0xE0000000
+#define CFG_CS1_START (SM501_FB_BASE)
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
#define CFG_CS1_CFG 0x8F48FF70
#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
#endif
#define CFG_CS_BURST 0x00000000
-#define CFG_CS_DEADCYCLE 0x33333333
+#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
#define CFG_RESET_ADDRESS 0xff000000
#define CONFIG_IDE_PREINIT
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
#define CFG_ATA_IDE0_OFFSET 0x0000
projects / u-boot / commitdiff