]> git.sur5r.net Git - u-boot/commitdiff
ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board
authorAlban Bedel <alban.bedel@avionic-design.de>
Thu, 14 Nov 2013 09:58:30 +0000 (10:58 +0100)
committerTom Warren <twarren@nvidia.com>
Wed, 18 Dec 2013 17:19:49 +0000 (10:19 -0700)
Add support for the new Tamonten™ NG platform from Avionic Design.
Currently only I2C, MMC, USB and ethernet have been tested.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
board/avionic-design/common/pinmux-config-tamonten-ng.h [new file with mode: 0644]
board/avionic-design/common/tamonten-ng.c [new file with mode: 0644]
board/avionic-design/dts/tegra30-tamonten.dtsi [new file with mode: 0644]
board/avionic-design/dts/tegra30-tec-ng.dts [new file with mode: 0644]
board/avionic-design/tec-ng/Makefile [new file with mode: 0644]
boards.cfg
include/configs/tec-ng.h [new file with mode: 0644]

diff --git a/board/avionic-design/common/pinmux-config-tamonten-ng.h b/board/avionic-design/common/pinmux-config-tamonten-ng.h
new file mode 100644 (file)
index 0000000..39df731
--- /dev/null
@@ -0,0 +1,385 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_TAMONTEN_NG_H_
+#define _PINMUX_CONFIG_TAMONTEN_NG_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io)      \
+       {                                                       \
+               .pingroup       = PINGRP_##_pingroup,           \
+               .func           = PMUX_FUNC_##_mux,             \
+               .pull           = PMUX_PULL_##_pull,            \
+               .tristate       = PMUX_TRI_##_tri,              \
+               .io             = PMUX_PIN_##_io,               \
+               .lock           = PMUX_PIN_LOCK_DEFAULT,        \
+               .od             = PMUX_PIN_OD_DEFAULT,          \
+               .ioreset        = PMUX_PIN_IO_RESET_DEFAULT,    \
+       }
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+       {                                                       \
+               .pingroup       = PINGRP_##_pingroup,           \
+               .func           = PMUX_FUNC_##_mux,             \
+               .pull           = PMUX_PULL_##_pull,            \
+               .tristate       = PMUX_TRI_##_tri,              \
+               .io             = PMUX_PIN_##_io,               \
+               .lock           = PMUX_PIN_LOCK_##_lock,        \
+               .od             = PMUX_PIN_OD_##_od,            \
+               .ioreset        = PMUX_PIN_IO_RESET_DEFAULT,    \
+       }
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+       {                                                       \
+               .pingroup       = PINGRP_##_pingroup,           \
+               .func           = PMUX_FUNC_##_mux,             \
+               .pull           = PMUX_PULL_##_pull,            \
+               .tristate       = PMUX_TRI_##_tri,              \
+               .io             = PMUX_PIN_##_io,               \
+               .lock           = PMUX_PIN_LOCK_##_lock,        \
+               .od             = PMUX_PIN_OD_DEFAULT,          \
+               .ioreset        = PMUX_PIN_IO_RESET_##_ioreset  \
+       }
+
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+       {                                                       \
+               .padgrp         = PDRIVE_PINGROUP_##_padgrp,    \
+               .slwf           = _slwf,                        \
+               .slwr           = _slwr,                        \
+               .drvup          = _drvup,                       \
+               .drvdn          = _drvdn,                       \
+               .lpmd           = PGRP_LPMD_##_lpmd,            \
+               .schmt          = PGRP_SCHMT_##_schmt,          \
+               .hsm            = PGRP_HSM_##_hsm,              \
+       }
+
+static struct pingroup_config tamonten_ng_pinmux_common[] = {
+       /* SDMMC1 pinmux */
+       DEFAULT_PINMUX(SDMMC1_CLK,  SDMMC1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC1_CMD,  SDMMC1, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP,     NORMAL, INPUT),
+
+       /* SDMMC3 pinmux */
+       DEFAULT_PINMUX(SDMMC3_CLK,  SDMMC3, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_CMD,  SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT4, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT5, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT6, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SDMMC3_DAT7, SDMMC3, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_IORDY,   RSVD1,  UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_CS6_N,   RSVD1,  UP,     NORMAL, INPUT),
+
+       /* SDMMC4 pinmux */
+       LV_PINMUX(SDMMC4_CLK,   SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_CMD,   SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT0,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT1,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT2,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT3,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT4,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT5,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT6,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_DAT7,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(SDMMC4_RST_N, RSVD1,  DOWN,   NORMAL, INPUT, DISABLE, DISABLE),
+
+       /* I2C1 pinmux */
+       I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+       I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+       /* I2C2 pinmux */
+       I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+       I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+       /* I2C3 pinmux */
+       I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+       I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+       /* I2C4 pinmux */
+       I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+       I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+       /* Power I2C pinmux */
+       I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+       I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+       /* UART1 */
+       DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(ULPI_DATA1, UARTA, NORMAL, NORMAL, INPUT),
+
+       /* UART2 */
+       DEFAULT_PINMUX(UART2_RXD,   UARTB, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(UART2_TXD,   UARTB, NORMAL, NORMAL, OUTPUT),
+
+       /* UART3 */
+       DEFAULT_PINMUX(UART3_TXD,   UARTC, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(UART3_RXD,   UARTC, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+
+       /* UART4 */
+       DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(ULPI_DIR, UARTD, UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+
+       /* DAP */
+       DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+
+       /* I2S1 */
+       DEFAULT_PINMUX(DAP2_FS,   I2S1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP2_DIN,  I2S1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+       /* SPDIF */
+       DEFAULT_PINMUX(SPDIF_IN,  SPDIF, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+
+       /* I2S2 */
+       DEFAULT_PINMUX(DAP3_FS,   I2S2, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP3_DIN,  I2S2, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+
+       /* DAP4 */
+       DEFAULT_PINMUX(DAP4_FS,   I2S3, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP4_DIN,  I2S3, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+
+       /* Tamonten GPIO */
+       DEFAULT_PINMUX(GPIO_PV2,   RSVD1, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(GPIO_PV3,   RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SPI2_CS1_N, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* LCD */
+       DEFAULT_PINMUX(LCD_PWR1,  DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_PWR2,  DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_SDIN,  DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_SDOUT, DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_WR_N,  DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_CS0_N, DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_DC0,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_SCK,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_PWR0,  DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_PCLK,  DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_DE,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_HSYNC, DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_VSYNC, DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D0,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D1,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D2,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D3,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D4,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D5,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D6,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D7,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D8,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D9,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D10,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D11,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D12,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D13,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D14,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D15,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D16,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D17,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D18,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D19,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D20,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D21,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D22,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_D23,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_CS1_N, DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_M1,    DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(LCD_DC1,   DISPA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(CRT_HSYNC, CRT,   NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(CRT_VSYNC, CRT,   NORMAL, NORMAL, OUTPUT),
+
+       /* BT656 */
+       LV_PINMUX(VI_MCLK,  VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_PCLK,  VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_HSYNC, VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_VSYNC, VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D2,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D3,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D4,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D5,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D6,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D7,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D8,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D9,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D11,   RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+       /* GPIOs */
+       DEFAULT_PINMUX(GPIO_PU5, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_AD12, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* LCD BL */
+       DEFAULT_PINMUX(GMI_AD8,  PWM0,  NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD10, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+       /* SPI4 */
+       DEFAULT_PINMUX(GMI_A16, SPI4, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_A17, SPI4, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_A18, SPI4, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_A19, SPI4, NORMAL, NORMAL, INPUT),
+
+       /* Video input GPIO */
+       DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PBB7, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* Sensor GPIO */
+       DEFAULT_PINMUX(GPIO_PCC2, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* JTAG */
+       DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+       /* Power controls */
+       DEFAULT_PINMUX(GMI_CS2_N, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* SPI1 */
+       DEFAULT_PINMUX(SPI1_MOSI,  SPI1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SPI1_SCK,   SPI1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(SPI1_MISO,  SPI1, NORMAL, NORMAL, INPUT),
+
+       /* PMU */
+       DEFAULT_PINMUX(GPIO_PV0,    RSVD1,  UP,     NORMAL, INPUT),
+       DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(CLK_32K_IN,  SYSCLK, NORMAL, NORMAL, INPUT),
+
+       /* PCI */
+       DEFAULT_PINMUX(PEX_L0_PRSNT_N,  PCIE, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(PEX_L0_RST_N,    PCIE, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(PEX_WAKE_N,      PCIE, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(PEX_L1_PRSNT_N,  PCIE, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(PEX_L1_RST_N,    PCIE, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(PEX_L2_PRSNT_N,  PCIE, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(PEX_L2_RST_N,    PCIE, NORMAL, NORMAL, OUTPUT),
+       DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+
+       /* HDMI */
+       DEFAULT_PINMUX(HDMI_CEC, CEC,   NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+       /* UART1 - NC */
+       DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, INPUT),
+
+       /* UART2 - NC */
+       DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+
+       /* DAP - NC */
+       DEFAULT_PINMUX(CLK1_REQ,  RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(CLK3_OUT,  RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(CLK3_REQ,  RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* DAP4 - NC */
+       DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+
+       /* Tamonten GPIO - NC */
+       DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(CLK2_REQ, DAP,        NORMAL, NORMAL, INPUT),
+
+       /* BT656 - NC */
+       LV_PINMUX(VI_D0,  RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D1,  RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+       LV_PINMUX(VI_D10, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+       /* GPIO - NC */
+       DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PU4, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* Video input - NC */
+       DEFAULT_PINMUX(CAM_MCLK,  RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PBB3, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PBB5, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PBB6, RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW11,  RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* KBC keys - NC */
+       DEFAULT_PINMUX(KB_ROW0,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW1,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW2,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW3,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW4,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW5,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW6,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW7,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW8,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW9,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW12, KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW13, KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW14, KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_ROW15, KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL0,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL1,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL2,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL3,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL4,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL5,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL6,  KBC, UP, NORMAL, INPUT),
+       DEFAULT_PINMUX(KB_COL7,  KBC, UP, NORMAL, INPUT),
+
+       /* PMU - NC */
+       DEFAULT_PINMUX(CLK_32K_OUT, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* Power rails GPIO - NC */
+       DEFAULT_PINMUX(SPI2_SCK,  RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PBB4, RSVD1, NORMAL, NORMAL, INPUT),
+
+       /* Others - NC */
+       DEFAULT_PINMUX(GMI_WP_N,   RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GPIO_PV1,   RSVD1, NORMAL, NORMAL, INPUT),
+       DEFAULT_PINMUX(GMI_WAIT,   NAND, UP,     TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_ADV_N,  NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_CLK,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_CS3_N,  NAND, NORMAL, NORMAL,   OUTPUT),
+       DEFAULT_PINMUX(GMI_CS7_N,  NAND, UP,     NORMAL,   INPUT),
+       DEFAULT_PINMUX(GMI_AD0,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD1,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD2,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD3,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD4,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD5,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD6,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD7,    NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_AD9,    PWM1, NORMAL, NORMAL,   OUTPUT),
+       DEFAULT_PINMUX(GMI_AD11,   NAND, NORMAL, NORMAL,   OUTPUT),
+       DEFAULT_PINMUX(GMI_AD13,   NAND, UP,     NORMAL,   INPUT),
+       DEFAULT_PINMUX(GMI_WR_N,   NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_OE_N,   NAND, NORMAL, TRISTATE, OUTPUT),
+       DEFAULT_PINMUX(GMI_DQS,    NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+static struct padctrl_config tamonten_ng_padctrl[] = {
+       /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+       DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR,
+               SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif /* _PINMUX_CONFIG_TAMONTEN_NG_H_ */
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
new file mode 100644 (file)
index 0000000..9d395c6
--- /dev/null
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+#include "pinmux-config-tamonten-ng.h"
+#include <i2c.h>
+
+#define PMU_I2C_ADDRESS                0x2D
+
+#define PMU_REG_LDO5           0x32
+
+#define PMU_REG_LDO_HIGH_POWER 1
+
+/* Voltage selection for the LDOs with 100mV resolution */
+#define PMU_REG_LDO_SEL_100(mV)        ((((mV - 1000) / 100) + 2) << 2)
+
+#define PMU_REG_LDO_100(st, mV)        (PMU_REG_LDO_##st | PMU_REG_LDO_SEL_100(mV))
+
+#define PMU_LDO5(st, mV)       PMU_REG_LDO_100(st, mV)
+
+void pinmux_init(void)
+{
+       pinmux_config_table(tamonten_ng_pinmux_common,
+                           ARRAY_SIZE(tamonten_ng_pinmux_common));
+       pinmux_config_table(unused_pins_lowpower,
+                           ARRAY_SIZE(unused_pins_lowpower));
+
+       /* Initialize any non-default pad configs (APB_MISC_GP regs) */
+       padgrp_config_table(tamonten_ng_padctrl,
+                           ARRAY_SIZE(tamonten_ng_padctrl));
+}
+
+void gpio_early_init(void)
+{
+       /* Turn on the alive signal */
+       gpio_request(GPIO_PV2, "ALIVE");
+       gpio_direction_output(GPIO_PV2, 1);
+
+       /* Remove the reset on the external periph */
+       gpio_request(GPIO_PI4, "nRST_PERIPH");
+       gpio_direction_output(GPIO_PI4, 1);
+}
+
+void pmu_write(uchar reg, uchar data)
+{
+       i2c_set_bus_num(4);     /* PMU is on bus 4 */
+       i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
+}
+
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+       /* Enable LDO5 with 3.3v for SDMMC3 */
+       pmu_write(PMU_REG_LDO5, PMU_LDO5(HIGH_POWER, 3300));
+
+       /* Switch the power on */
+       gpio_request(GPIO_PJ2, "EN_3V3_EMMC");
+       gpio_direction_output(GPIO_PJ2, 1);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+       /*
+        * NOTE: We don't do mmc-specific pin muxes here.
+        * They were done globally in pinmux_init().
+        */
+
+       /* Bring up the SDIO1 power rail */
+       board_sdmmc_voltage_init();
+}
diff --git a/board/avionic-design/dts/tegra30-tamonten.dtsi b/board/avionic-design/dts/tegra30-tamonten.dtsi
new file mode 100644 (file)
index 0000000..50d5762
--- /dev/null
@@ -0,0 +1,69 @@
+#include "tegra30.dtsi"
+
+/ {
+       model = "Avionic Design Tamonten NG";
+       compatible = "ad,tamonten-ng", "nvidia,tegra30";
+
+       memory {
+               reg = <0x80000000 0x40000000>;
+       };
+
+       aliases {
+               i2c0 = "/i2c@7000c000";
+               i2c1 = "/i2c@7000c700";
+               i2c2 = "/i2c@7000c400";
+               i2c3 = "/i2c@7000c500";
+               i2c4 = "/i2c@7000d000";
+               sdhci0 = "/sdhci@78000600";
+               sdhci1 = "/sdhci@78000400";
+               sdhci2 = "/sdhci@78000000";
+               usb0 = "/usb@7d008000";
+       };
+
+       /* GEN1 */
+       i2c@7000c000 {
+               status = "okay";
+               clock-frequency = <100000>;
+       };
+
+       /* GEN2 */
+       i2c@7000c400 {
+               clock-frequency = <100000>;
+       };
+
+       /* CAM */
+       i2c@7000c500 {
+               status = "okay";
+               clock-frequency = <100000>;
+       };
+
+       /* DDC */
+       i2c@7000c700 {
+               status = "okay";
+               clock-frequency = <100000>;
+       };
+
+       /* PWR */
+       i2c@7000d000 {
+               status = "okay";
+               clock-frequency = <100000>;
+       };
+
+       /* SD slot on the base board */
+       sdhci@78000400 {
+               cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+               wp-gpios = <&gpio 67 0>; /* gpio PI3 */
+               bus-width = <4>;
+       };
+
+       /* EMMC on the COM module */
+       sdhci@78000600 {
+               status = "okay";
+               bus-width = <8>;
+       };
+
+       usb@7d008000 {
+               status = "okay";
+       };
+
+};
diff --git a/board/avionic-design/dts/tegra30-tec-ng.dts b/board/avionic-design/dts/tegra30-tec-ng.dts
new file mode 100644 (file)
index 0000000..8a69e81
--- /dev/null
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "tegra30-tamonten.dtsi"
+
+/ {
+       model = "Avionic Design Tamonten™ NG Evaluation Carrier";
+       compatible = "ad,tec-ng", "nvidia,tegra30";
+
+       /* GEN2 */
+       i2c@7000c400 {
+               status = "okay";
+       };
+
+       /* SD card slot */
+       sdhci@78000400 {
+               status = "okay";
+       };
+};
diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile
new file mode 100644 (file)
index 0000000..f41eb30
--- /dev/null
@@ -0,0 +1,12 @@
+#
+# (C) Copyright 2013
+# Avionic Design GmbH <www.avionic-design.de>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
+
+obj-y  := ../common/tamonten-ng.o
+
+include ../../nvidia/common/common.mk
index c99d6480303a2beb65a58a71ee463dde7499d90e..152d85e80d18c30f5e4a89d20b3b37a11c561728 100644 (file)
@@ -362,6 +362,7 @@ Active  arm         armv7:arm720t  tegra114    nvidia          dalmore
 Active  arm         armv7:arm720t  tegra20     avionic-design  medcom-wide         medcom-wide                          -                                                                                                                                 Alban Bedel <alban.bedel@avionic-design.de>
 Active  arm         armv7:arm720t  tegra20     avionic-design  plutux              plutux                               -                                                                                                                                 Alban Bedel <alban.bedel@avionic-design.de>
 Active  arm         armv7:arm720t  tegra20     avionic-design  tec                 tec                                  -                                                                                                                                 Alban Bedel <alban.bedel@avionic-design.de>
+Active  arm         armv7:arm720t  tegra30     avionic-design  tec-ng              tec-ng                               -                                                                                                                                 Alban Bedel <alban.bedel@avionic-design.de>
 Active  arm         armv7:arm720t  tegra20     compal          paz00               paz00                                -                                                                                                                                 Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com>
 Active  arm         armv7:arm720t  tegra20     compulab        trimslice           trimslice                            -                                                                                                                                 Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com>
 Active  arm         armv7:arm720t  tegra20     nvidia          harmony             harmony                              -                                                                                                                                 Tom Warren <twarren@nvidia.com>
diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h
new file mode 100644 (file)
index 0000000..13baa76
--- /dev/null
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra30-common.h"
+
+/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE     tegra30-tec-ng
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT                       "Tegra30 (TEC-NG) # "
+#define CONFIG_TEGRA_BOARD_STRING      "Avionic Design Tamonten™ NG Evaluation Carrier"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS         TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CONFIG_SYS_MMC_ENV_PART                2
+
+/* SPI */
+#define CONFIG_TEGRA20_SLINK
+#define CONFIG_TEGRA_SLINK_CTRLS       6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED        24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE          (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+/* Tag support */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+/* support the new (FDT-based) image format */
+#define CONFIG_FIT
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */