that work for multiple fs types
CONFIG_CMD_FS_UUID * Look up a filesystem UUID
CONFIG_CMD_SAVEENV saveenv
- CONFIG_CMD_FAT * FAT command support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support
CONFIG_CMD_GO * the 'go' command (exec code)
- Partition Labels (disklabels) Supported:
Zero or more of the following:
CONFIG_MAC_PARTITION Apple's MacOS partition table.
- CONFIG_DOS_PARTITION MS Dos partition table, traditional on the
- Intel architecture, USB sticks, etc.
CONFIG_ISO_PARTITION ISO partition table, used on CDROM etc.
CONFIG_EFI_PARTITION GPT partition table, common when EFI is the
bootloader. Note 2TB partition limit; see
CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS
Define these for a default partition on a NOR device
-- FAT(File Allocation Table) filesystem write function support:
- CONFIG_FAT_WRITE
-
- Define this to enable support for saving memory data as a
- file in FAT formatted partition.
-
- This will also enable the command "fatwrite" enabling the
- user to write files to FAT.
-
-- FAT(File Allocation Table) filesystem cluster size:
- CONFIG_FS_FAT_MAX_CLUSTSIZE
-
- Define the max cluster size for fat operations else
- a default value of 65536 will be defined.
-
- Keyboard Support:
See Kconfig help for available keyboard drivers.
environment.
- CONFIG_FAT_WRITE:
- This should be defined. Otherwise it cannot save the environment file.
+ This must be enabled. Otherwise it cannot save the environment file.
- CONFIG_ENV_IS_IN_MMC:
select DM_SPI
select DM_GPIO
select DM_MMC
- imply CRC32_VERIFY
imply CMD_GETTIME
imply CMD_HASH
imply CMD_IO
imply CMD_IOTRACE
- imply LZMA
imply CMD_LZMADEC
+ imply CRC32_VERIFY
+ imply FAT_WRITE
imply HASH_VERIFY
+ imply LZMA
config SH
bool "SuperH architecture"
select DM_SERIAL
select DM_GPIO
select OF_CONTROL
+ imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
bool "Support bcm23550_w1d"
select CPU_V7
imply CRC32_VERIFY
+ imply FAT_WRITE
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
select CPU_V7
imply CRC32_VERIFY
+ imply FAT_WRITE
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7
imply CRC32_VERIFY
imply CMD_HASH
+ imply FAT_WRITE
imply HASH_VERIFY
config TARGET_BCMNSP
select DM_SPI
select DM_GPIO
select DM_KEYBOARD
+ imply FAT_WRITE
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select DM
select DM_SERIAL
select BOARD_EARLY_INIT_F
+ imply FAT_WRITE
imply SYS_THUMB_BUILD
config TARGET_S32V234EVB
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
select SYS_THUMB_BUILD
imply CRC32_VERIFY
+ imply FAT_WRITE
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select USB_STORAGE if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
+ imply FAT_WRITE
imply PRE_CONSOLE_BUFFER
imply SPL_GPIO_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
select SPL_CLK
select CLK_ZYNQ
imply CMD_CLK
+ imply FAT_WRITE
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select SPL_BOARD_INIT if SPL
select SPL_CLK
select DM_USB if USB
+ imply FAT_WRITE
config TEGRA
bool "NVIDIA Tegra"
+ imply FAT_WRITE
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SUPPORT_SPL
+ imply FAT_WRITE
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
select DM_USB if USB
select DM_PWM
select DM_REGULATOR
+ imply FAT_WRITE
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0403
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_GENERATE_SMBIOS_TABLE is not set
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0403
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0403
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0403
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_FAT_WRITE=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Toradex"
CONFIG_G_DNL_VENDOR_NUM=0x1b67
CONFIG_G_DNL_PRODUCT_NUM=0x4000
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set
CONFIG_G_DNL_MANUFACTURER="Toradex"
CONFIG_G_DNL_VENDOR_NUM=0x1b67
CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
CONFIG_G_DNL_MANUFACTURER="Toradex"
CONFIG_G_DNL_VENDOR_NUM=0x1b67
CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_CMD_FAT=y
# CONFIG_MMC is not set
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_SHA1=y
CONFIG_SHA256=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_LCD=y
CONFIG_OMAP_WATCHDOG=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_LCD=y
CONFIG_OMAP_WATCHDOG=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_LCD=y
CONFIG_OMAP_WATCHDOG=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_STORAGE=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
CONFIG_EFI_PARTITION=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Toradex"
CONFIG_G_DNL_VENDOR_NUM=0x1b67
CONFIG_G_DNL_PRODUCT_NUM=0x4000
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set
CONFIG_G_DNL_MANUFACTURER="Toradex"
CONFIG_G_DNL_VENDOR_NUM=0x1b67
CONFIG_G_DNL_PRODUCT_NUM=0x4000
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_DATE=y
-CONFIG_DOS_PARTITION=y
+CONFIG_CMD_FAT=y
CONFIG_ISO_PARTITION=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MMC_DW_K3=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_CMD_FAT=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+# CONFIG_FAT_WRITE is not set
CONFIG_OF_LIBFDT=y
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CMD_GPT=y
-CONFIG_DOS_PARTITION=y
+CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_CMD_GPT=y
-CONFIG_DOS_PARTITION=y
+CONFIG_CMD_FAT=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
# CONFIG_BLK is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
# CONFIG_BLK is not set
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="TI"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_UBI=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_EFI_PARTITION=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0403
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SYS_NS16550=y
+# CONFIG_FAT_WRITE is not set
CONFIG_OF_LIBFDT=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_EFI_PARTITION=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_PIC32=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_NFS=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_CMD_FAT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_USB=y
CONFIG_USB=y
CONFIG_CMD_NFS=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_CMD_FAT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_USB=y
CONFIG_USB=y
CONFIG_G_DNL_MANUFACTURER="Samsung"
CONFIG_G_DNL_VENDOR_NUM=0x04e8
CONFIG_G_DNL_PRODUCT_NUM=0x6601
+CONFIG_FAT_WRITE=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_FAT=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_USB=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_FAT=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_FAT_WRITE=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_FAT_WRITE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
+CONFIG_FAT_WRITE=y
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
#define CONFIG_TFTP_BLOCKSIZE 16352
#define CONFIG_TFTP_TSIZE
-/* Miscellaneous commands */
-#define CONFIG_FAT_WRITE
-
#undef CONFIG_IPADDR
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#define CONFIG_TFTP_BLOCKSIZE 16352
#define CONFIG_TFTP_TSIZE
-/* Miscellaneous commands */
-#define CONFIG_FAT_WRITE
-
/* Increase console I/O buffer size */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE 1024
#else
/* u-boot env in sd/mmc card */
#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
#define FAT_ENV_FILE "uboot.env"
#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
#else
/* Use file in FAT file to save environment */
#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
#else /* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
/* Initial upstream - boot to cmd prompt only */
#define CONFIG_BOOTCOMMAND ""
-/* Commands */
-#define CONFIG_FAT_WRITE
-
#undef CONFIG_USB_GADGET_VBUS_DRAW
#define CONFIG_USB_GADGET_VBUS_DRAW 0
#define CONFIG_USBID_ADDR 0x34052c46
/* Initial upstream - boot to cmd prompt only */
#define CONFIG_BOOTCOMMAND ""
-/* Commands */
-#define CONFIG_FAT_WRITE
-
#define CONFIG_USBID_ADDR 0x34052c46
#endif /* __BCM28155_AP_H */
#define CONFIG_MX_CYCLIC
-/* Commands */
-#define CONFIG_FAT_WRITE
-
/* Enable Time Command */
/* Misc utility code */
* enabled a number of useful commands and support.
*/
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#endif /* CONFIG_MMC, ... */
#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-/*
- * Common filesystems support. When we have removable storage we
- * enabled a number of useful commands and support.
- */
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_FAT_WRITE
-#endif /* CONFIG_MMC, ... */
#endif /* __CONFIG_BRXRE1_H__ */
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_LZO
#define CONFIG_RBTREE
-/* Debug commands */
-
-/* Miscellaneous commands */
-#define CONFIG_FAT_WRITE
#define BOARD_EXTRA_ENV_SETTINGS \
"mtdparts=" MTDPARTS_DEFAULT "\0"
#define CONFIG_TFTP_BLOCKSIZE 16352
#define CONFIG_TFTP_TSIZE
-/* Miscellaneous commands */
-#define CONFIG_FAT_WRITE
-
/* Increase console I/O buffer size */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */
#undef CONFIG_SUPPORT_RAW_INITRD
-#undef CONFIG_FAT_WRITE
/* BOOTP/DHCP options */
#define CONFIG_BOOTP_SUBNETMASK
* Commands configuration
*/
#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
/*
* mv-plug-common.h should be defined after CMD configs since it used them
"led4=60,0,1\0" \
"led5=63,0,1\0"
-#undef CONFIG_CMD_FAT
-
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
/* PWM */
#define CONFIG_PWM
-/* Command definition*/
-#define CONFIG_FAT_WRITE
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "1:1"
#define FAT_ENV_FILE "uboot.env"
-#define CONFIG_FAT_WRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
/* Monitor Command Prompt */
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CMD_FAT
-
/* SPI */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_CMD_SCSI
-#ifndef CONFIG_CMD_FAT
-#define CONFIG_CMD_FAT
-#endif
#ifndef CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT2
#endif
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
-
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
/*
* U-Boot Commands
*/
-#define CONFIG_FAT_WRITE
-
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_SATA
#undef CONFIG_BOOTARGS
#define CONFIG_SYS_USE_SERIALFLASH 1
-/*
- * U-Boot Commands
- */
-#define CONFIG_FAT_WRITE
-
/*
* Memory configurations
*/
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
/* Using ULP WDOG for reset */
#define WDOG_BASE_ADDR WDG1_RBASE
#include "mx6_common.h"
/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SATA
*/
/* FAT FS */
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_FS_FAT
-#define CONFIG_FAT_WRITE
/* EXT4 FS */
#define CONFIG_FS_EXT4
#define FAT_ENV_DEVICE_AND_PART "0"
#define FAT_ENV_FILE "uboot.env"
#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
#define CONFIG_CMD_SDRAM
/* Support File sytems */
-#define CONFIG_FAT_WRITE
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#include <asm/arch/rmobile.h>
#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_SUPPORT_RAW_INITRD
/* Support File sytems */
-#define CONFIG_FAT_WRITE
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
-
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (512UL << 20UL)
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
-
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (2UL << 30)
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
-
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_FS_FAT
-#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
/* RAW SD card / eMMC locations. */
#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_FS_FAT
-#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
/* RAW SD card / eMMC locations. */
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"
-#define CONFIG_FAT_WRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_SYS_LOAD_ADDR 0x1000000
#define CONFIG_PREBOOT "usb start"
#define CONFIG_SYS_ONENAND_BASE 0xB0000000
/* write support for filesystems */
-#define CONFIG_FAT_WRITE
#define CONFIG_EXT4_WRITE
/* GPT */
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2_PTC"
-#if defined(CONFIG_CMD_USB)
-#define CONFIG_CMD_FAT
-#endif
-
/* Ethernet Hardware */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#endif
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_FAT_WRITE
-#endif
-
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
#if CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
#endif
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_FAT_WRITE
-#endif
-
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
#ifdef CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_CMD_PCI
-#define CONFIG_FS_FAT
-#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#define CONFIG_HOST_MAX_DEVICES 4
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_FS_FAT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
/* Command line configuration */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define __CONFIG_SOCFGPA_ARRIA10_H__
#include <asm/arch/base_addr_a10.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
+
#define CONFIG_HW_WATCHDOG
/* Booting Linux */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-#define CONFIG_FAT_WRITE
-
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#include <asm/arch/base_addr_ac5.h>
-/* U-Boot Commands */
-#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* Memory configurations */
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
-#define CONFIG_FAT_WRITE /* enable write access */
-
#define CONFIG_SPL_FRAMEWORK
#ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */
#ifdef CONFIG_FS_EXT4
#undef CONFIG_FS_EXT4
#endif
-#ifdef CONFIG_FS_FAT
-#undef CONFIG_FS_FAT
-#endif
/* remove USB */
#ifdef CONFIG_USB_EHCI_TEGRA
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
-#define CONFIG_FAT_WRITE
#endif
#endif /* _TEGRA_COMMON_H_ */
#define CONFIG_CMD_ASKENV
-#define CONFIG_FS_FAT
-
/*
* Only one of the following two options (DDR3/DDR2) should be enabled
* CONFIG_TI816X_EVM_DDR2
/* USB Configuration */
#define CONFIG_USB_XHCI_KEYSTONE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-#define CONFIG_FS_FAT
#define CONFIG_USB_SS_BASE KS2_USB_SS_BASE
#define CONFIG_USB_HOST_XHCI_BASE KS2_USB_HOST_XHCI_BASE
#define CONFIG_DEV_USB_PHY_BASE KS2_DEV_USB_PHY_BASE
/* USB */
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
-#define CONFIG_FAT_WRITE
/* SD/MMC */
#define CONFIG_SUPPORT_EMMC_BOOT
# define FAT_ENV_INTERFACE "mmc"
#endif
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQMP_USB)
-# define CONFIG_FAT_WRITE
-#endif
-
#ifdef CONFIG_NAND_ARASAN
# define CONFIG_CMD_NAND_LOCK_UNLOCK
# define CONFIG_SYS_MAX_NAND_DEVICE 1
#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQ_USB)
# define CONFIG_SUPPORT_VFAT
-# define CONFIG_FAT_WRITE
#endif
#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
#define VFAT_MAXSEQ 9 /* Up to 9 of 13 2-byte UTF-16 entries */
#define PREFETCH_BLOCKS 2
-#ifndef CONFIG_FS_FAT_MAX_CLUSTSIZE
-#define CONFIG_FS_FAT_MAX_CLUSTSIZE 65536
-#endif
#define MAX_CLUSTSIZE CONFIG_FS_FAT_MAX_CLUSTSIZE
#define DIRENTSPERBLOCK (mydata->sect_size / sizeof(dir_entry))
CONFIG_FASTBOOT_FLASH_NAND_DEV
CONFIG_FASTBOOT_FLASH_NAND_TRIMFFS
CONFIG_FAST_FLASH_BIT
-CONFIG_FAT_WRITE
CONFIG_FB_ADDR
CONFIG_FB_BACKLIGHT
CONFIG_FB_DEFERRED_IO
CONFIG_FSMTDBLK
CONFIG_FSNOTIFY
CONFIG_FS_EXT4
-CONFIG_FS_FAT
-CONFIG_FS_FAT_MAX_CLUSTSIZE
CONFIG_FS_POSIX_ACL
CONFIG_FTAHBC020S
CONFIG_FTAHBC020S_BASE