net: ag7xxx: Comment register names

The register constants don't use the exact names that are used in the
TRM, so add comments that use the exact names so that it is clear what
register is being referred to.

https://www.atheros-drivers.com/qualcomm-atheros-datasheets-for-AR9331.html

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Marek Vasut <marex@denx.de>

diff --git a/drivers/net/ag7xxx.c b/drivers/net/ag7xxx.c
index cf60d114756458feb0a92c21694d42aab2bbb717..30771b9f60d8ca34fdf9b18c5311fd974ff0190a 100644 (file)
--- a/drivers/net/ag7xxx.c
+++ b/drivers/net/ag7xxx.c
@@ -26,6 +26,7 @@ enum ag7xxx_model {
        AG7XXX_MODEL_AG934X,
 };
 
+/* MAC Configuration 1 */
 #define AG7XXX_ETH_CFG1                                0x00
 #define AG7XXX_ETH_CFG1_SOFT_RST               BIT(31)
 #define AG7XXX_ETH_CFG1_RX_RST                 BIT(19)
@@ -34,6 +35,7 @@ enum ag7xxx_model {
 #define AG7XXX_ETH_CFG1_RX_EN                  BIT(2)
 #define AG7XXX_ETH_CFG1_TX_EN                  BIT(0)
 
+/* MAC Configuration 2 */
 #define AG7XXX_ETH_CFG2                                0x04
 #define AG7XXX_ETH_CFG2_IF_1000                        BIT(9)
 #define AG7XXX_ETH_CFG2_IF_10_100              BIT(8)
@@ -43,26 +45,34 @@ enum ag7xxx_model {
 #define AG7XXX_ETH_CFG2_PAD_CRC_EN             BIT(2)
 #define AG7XXX_ETH_CFG2_FDX                    BIT(0)
 
+/* MII Configuration */
 #define AG7XXX_ETH_MII_MGMT_CFG                        0x20
 #define AG7XXX_ETH_MII_MGMT_CFG_RESET          BIT(31)
 
+/* MII Command */
 #define AG7XXX_ETH_MII_MGMT_CMD                        0x24
 #define AG7XXX_ETH_MII_MGMT_CMD_READ           0x1
 
+/* MII Address */
 #define AG7XXX_ETH_MII_MGMT_ADDRESS            0x28
 #define AG7XXX_ETH_MII_MGMT_ADDRESS_SHIFT      8
 
+/* MII Control */
 #define AG7XXX_ETH_MII_MGMT_CTRL               0x2c
 
+/* MII Status */
 #define AG7XXX_ETH_MII_MGMT_STATUS             0x30
 
+/* MII Indicators */
 #define AG7XXX_ETH_MII_MGMT_IND                        0x34
 #define AG7XXX_ETH_MII_MGMT_IND_INVALID                BIT(2)
 #define AG7XXX_ETH_MII_MGMT_IND_BUSY           BIT(0)
 
+/* STA Address 1 & 2 */
 #define AG7XXX_ETH_ADDR1                       0x40
 #define AG7XXX_ETH_ADDR2                       0x44
 
+/* ETH Configuration 0 - 5 */
 #define AG7XXX_ETH_FIFO_CFG_0                  0x48
 #define AG7XXX_ETH_FIFO_CFG_1                  0x4c
 #define AG7XXX_ETH_FIFO_CFG_2                  0x50
@@ -70,18 +80,24 @@ enum ag7xxx_model {
 #define AG7XXX_ETH_FIFO_CFG_4                  0x58
 #define AG7XXX_ETH_FIFO_CFG_5                  0x5c
 
+/* DMA Transfer Control for Queue 0 */
 #define AG7XXX_ETH_DMA_TX_CTRL                 0x180
 #define AG7XXX_ETH_DMA_TX_CTRL_TXE             BIT(0)
 
+/* Descriptor Address for Queue 0 Tx */
 #define AG7XXX_ETH_DMA_TX_DESC                 0x184
 
+/* DMA Tx Status */
 #define AG7XXX_ETH_DMA_TX_STATUS               0x188
 
+/* Rx Control */
 #define AG7XXX_ETH_DMA_RX_CTRL                 0x18c
 #define AG7XXX_ETH_DMA_RX_CTRL_RXE             BIT(0)
 
+/* Pointer to Rx Descriptor */
 #define AG7XXX_ETH_DMA_RX_DESC                 0x190
 
+/* Rx Status */
 #define AG7XXX_ETH_DMA_RX_STATUS               0x194
 
 /* Custom register at 0x18070000 */