COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o
COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o
COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o
+COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o
+COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o
COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
--- /dev/null
+/*
+ * Copyright 2009 Extreme Engineering Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include "fsl_8xxx_misc.h"
+
+int checkboard(void)
+{
+ char name[] = CONFIG_SYS_BOARD_NAME;
+ char *s;
+
+#ifdef CONFIG_SYS_FORM_CUSTOM
+ s = "Custom";
+#elif CONFIG_SYS_FORM_6U_CPCI
+ s = "6U CompactPCI";
+#elif CONFIG_SYS_FORM_ATCA_PMC
+ s = "ATCA w/PMC";
+#elif CONFIG_SYS_FORM_ATCA_AMC
+ s = "ATCA w/AMC";
+#elif CONFIG_SYS_FORM_VME
+ s = "VME";
+#elif CONFIG_SYS_FORM_6U_VPX
+ s = "6U VPX";
+#elif CONFIG_SYS_FORM_PMC
+ s = "PMC";
+#elif CONFIG_SYS_FORM_PCI
+ s = "PCI";
+#elif CONFIG_SYS_FORM_3U_CPCI
+ s = "3U CompactPCI";
+#elif CONFIG_SYS_FORM_AMC
+ s = "AdvancedMC";
+#elif CONFIG_SYS_FORM_XMC
+ s = "XMC";
+#elif CONFIG_SYS_FORM_PMC_XMC
+ s = "PMC/XMC";
+#elif CONFIG_SYS_FORM_PCI_EXPRESS
+ s = "PCI Express";
+#elif CONFIG_SYS_FORM_3U_VPX
+ s = "3U VPX";
+#else
+#error "Form factor not defined"
+#endif
+
+ name[strlen(name) - 1] += get_board_derivative();
+ printf("Board: X-ES %s %s SBC\n", name, s);
+
+ /* Display board specific information */
+ puts(" ");
+ if ((s = getenv("board_rev")))
+ printf("Rev %s, ", s);
+ if ((s = getenv("serial#")))
+ printf("Serial# %s, ", s);
+ if ((s = getenv("board_cfg")))
+ printf("Cfg %s", s);
+ puts("\n");
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+/*
+ * Return a board's derivative model number. For example:
+ * return 2 for the XPedite5372 and return 1 for the XPedite5201.
+ */
+uint get_board_derivative(void)
+{
+#if defined(CONFIG_MPC85xx)
+ volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#elif defined(CONFIG_MPC86xx)
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+#endif
+
+ /*
+ * The top 4 lines of the local bus address are pulled low/high and
+ * can be read to determine the least significant digit of a board's
+ * model number.
+ */
+ return gur->gpporcr >> 28;
+}
+
+
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_8XXX_MISC_H___
+#define __FSL_8XXX_MISC_H___
+
+uint get_board_derivative(void);
+
+#endif /* __FSL_8XXX_MISC_H__ */
#include <asm/io.h>
#include <fdt_support.h>
#include <pca953x.h>
+#include "../common/fsl_8xxx_misc.h"
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI)
extern void ft_board_pci_setup(void *blob, bd_t *bd);
#endif
-int checkboard(void)
-{
- char *s;
-
- printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- return 0;
-}
/*
* Print out which flash was booted from and if booting from the 2nd flash,
* swap flash chip selects to maintain consistent flash numbering/addresses.
extern void ft_board_pci_setup(void *blob, bd_t *bd);
-int checkboard(void)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- char *s;
-
- printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
- out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
- out_be32(&ecm->eedr, 0xffffffff); /* Clear ecm errors */
- out_be32(&ecm->eeer, 0xffffffff); /* Enable ecm errors */
-
- return 0;
-}
-
static void flash_cs_fixup(void)
{
int flash_sel;
extern void ft_board_pci_setup(void *blob, bd_t *bd);
-int checkboard(void)
-{
- char *s;
-
- printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- return 0;
-}
-
static void flash_cs_fixup(void)
{
int flash_sel;
/* High Level Configuration Options */
#define CONFIG_XPEDITE1000 1
#define CONFIG_SYS_BOARD_NAME "XPedite1000"
+#define CONFIG_SYS_FORM_PMC 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1
#define CONFIG_440GX 1 /* 440 GX */
#define CONFIG_MPC8641 1 /* MPC8641 specific */
#define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */
#define CONFIG_SYS_BOARD_NAME "XPedite5170"
+#define CONFIG_SYS_FORM_3U_VPX 1
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_MPC8548 1
#define CONFIG_XPEDITE5200 1
#define CONFIG_SYS_BOARD_NAME "XPedite5200"
+#define CONFIG_SYS_FORM_PMC_XMC 1
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_MPC8572 1
#define CONFIG_XPEDITE5370 1
#define CONFIG_SYS_BOARD_NAME "XPedite5370"
+#define CONFIG_SYS_FORM_3U_VPX 1
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#ifndef CONFIG_SYS_TEXT_BASE
projects / u-boot / commitdiff