spi@131b0000 {
spi-max-frequency = <1000000>;
spi-deactivate-delay = <100>;
- cros-ec@0 {
+ cros_ec: cros-ec@0 {
reg = <0>;
compatible = "google,cros-ec";
spi-max-frequency = <5000000>;
samsung,dc-value = <25>;
};
- cros-ec-keyb {
- compatible = "google,cros-ec-keyb";
- google,key-rows = <8>;
- google,key-columns = <13>;
- google,repeat-delay-ms = <240>;
- google,repeat-rate-ms = <30>;
- google,ghost-filter;
- /*
- * Keymap entries take the form of 0xRRCCKKKK where
- * RR=Row CC=Column KKKK=Key Code
- * The values below are for a US keyboard layout and
- * are taken from the Linux driver. Note that the
- * 102ND key is not used for US keyboards.
- */
- linux,keymap = <
- /* CAPSLCK F1 B F10 */
- 0x0001003a 0x0002003b 0x00030030 0x00040044
- /* N = R_ALT ESC */
- 0x00060031 0x0008000d 0x000a0064 0x01010001
- /* F4 G F7 H */
- 0x0102003e 0x01030022 0x01040041 0x01060023
- /* ' F9 BKSPACE L_CTRL */
- 0x01080028 0x01090043 0x010b000e 0x0200001d
- /* TAB F3 T F6 */
- 0x0201000f 0x0202003d 0x02030014 0x02040040
- /* ] Y 102ND [ */
- 0x0205001b 0x02060015 0x02070056 0x0208001a
- /* F8 GRAVE F2 5 */
- 0x02090042 0x03010029 0x0302003c 0x03030006
- /* F5 6 - \ */
- 0x0304003f 0x03060007 0x0308000c 0x030b002b
- /* R_CTRL A D F */
- 0x04000061 0x0401001e 0x04020020 0x04030021
- /* S K J ; */
- 0x0404001f 0x04050025 0x04060024 0x04080027
- /* L ENTER Z C */
- 0x04090026 0x040b001c 0x0501002c 0x0502002e
- /* V X , M */
- 0x0503002f 0x0504002d 0x05050033 0x05060032
- /* L_SHIFT / . SPACE */
- 0x0507002a 0x05080035 0x05090034 0x050B0039
- /* 1 3 4 2 */
- 0x06010002 0x06020004 0x06030005 0x06040003
- /* 8 7 0 9 */
- 0x06050009 0x06060008 0x0608000b 0x0609000a
- /* L_ALT DOWN RIGHT Q */
- 0x060a0038 0x060b006c 0x060c006a 0x07010010
- /* E R W I */
- 0x07020012 0x07030013 0x07040011 0x07050017
- /* U R_SHIFT P O */
- 0x07060016 0x07070036 0x07080019 0x07090018
- /* UP LEFT */
- 0x070b0067 0x070c0069>;
- };
-
fimd@14400000 {
samsung,vl-freq = <60>;
samsung,vl-col = <1366>;
};
};
+
+#include "cros-ec-keyboard.dtsi"
pmic = "/i2c@12ca0000";
};
- cros-ec-keyb {
- compatible = "google,cros-ec-keyb";
- google,key-rows = <8>;
- google,key-columns = <13>;
- google,repeat-delay-ms = <240>;
- google,repeat-rate-ms = <30>;
- google,ghost-filter;
- /*
- * Keymap entries take the form of 0xRRCCKKKK where
- * RR=Row CC=Column KKKK=Key Code
- * The values below are for a US keyboard layout and
- * are taken from the Linux driver. Note that the
- * 102ND key is not used for US keyboards.
- */
- linux,keymap = <
- /* CAPSLCK F1 B F10 */
- 0x0001003a 0x0002003b 0x00030030 0x00040044
- /* N = R_ALT ESC */
- 0x00060031 0x0008000d 0x000a0064 0x01010001
- /* F4 G F7 H */
- 0x0102003e 0x01030022 0x01040041 0x01060023
- /* ' F9 BKSPACE L_CTRL */
- 0x01080028 0x01090043 0x010b000e 0x0200001d
- /* TAB F3 T F6 */
- 0x0201000f 0x0202003d 0x02030014 0x02040040
- /* ] Y 102ND [ */
- 0x0205001b 0x02060015 0x02070056 0x0208001a
- /* F8 GRAVE F2 5 */
- 0x02090042 0x03010029 0x0302003c 0x03030006
- /* F5 6 - \ */
- 0x0304003f 0x03060007 0x0308000c 0x030b002b
- /* R_CTRL A D F */
- 0x04000061 0x0401001e 0x04020020 0x04030021
- /* S K J ; */
- 0x0404001f 0x04050025 0x04060024 0x04080027
- /* L ENTER Z C */
- 0x04090026 0x040b001c 0x0501002c 0x0502002e
- /* V X , M */
- 0x0503002f 0x0504002d 0x05050033 0x05060032
- /* L_SHIFT / . SPACE */
- 0x0507002a 0x05080035 0x05090034 0x050B0039
- /* 1 3 4 2 */
- 0x06010002 0x06020004 0x06030005 0x06040003
- /* 8 7 0 9 */
- 0x06050009 0x06060008 0x0608000b 0x0609000a
- /* L_ALT DOWN RIGHT Q */
- 0x060a0038 0x060b006c 0x060c006a 0x07010010
- /* E R W I */
- 0x07020012 0x07030013 0x07040011 0x07050017
- /* U R_SHIFT P O */
- 0x07060016 0x07070036 0x07080019 0x07090018
- /* UP LEFT */
- 0x070b0067 0x070c0069>;
- };
-
dmc {
mem-manuf = "samsung";
mem-type = "ddr3";
spi@12d40000 { /* spi2 */
spi-max-frequency = <4000000>;
spi-deactivate-delay = <200>;
- cros-ec@0 {
+ cros_ec: cros-ec@0 {
reg = <0>;
compatible = "google,cros-ec";
spi-half-duplex;
samsung,dual-lcd-enabled = <0>;
};
};
+
+#include "cros-ec-keyboard.dtsi"
spi@12d40000 { /* spi2 */
spi-max-frequency = <4000000>;
spi-deactivate-delay = <200>;
- cros-ec@0 {
+ cros_ec: cros-ec@0 {
reg = <0>;
compatible = "google,cros-ec";
spi-half-duplex;
samsung,dual-lcd-enabled = <0>;
};
};
+
+#include "cros-ec-keyboard.dtsi"
-CROS_EC Keyboard
+ChromeOS EC Keyboard
-The CROS_EC (Matrix Keyboard Protocol) allows communcation with a secondary
-micro used for keyboard, and possible other features.
+Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
+a separate EC (Embedded Controller) device. It provides a message for reading
+key scans from the EC. These are then converted into keycodes for processing
+by the kernel.
-The CROS_EC keyboard uses this protocol to receive key scans and produce input
-in U-Boot.
+This binding is based on matrix-keymap.txt and extends/modifies it as follows:
-Required properties :
-- compatible : "google,cros-ec-keyb"
-- google,key-rows : Number of key rows
-- google,key-columns : Number of key columns
+Required properties:
+- compatible: "google,cros-ec-keyb"
-Optional properties, in addition to those specified by the shared
-matrix-keyboard bindings:
+Optional properties:
+- google,needs-ghost-filter: True to enable a ghost filter for the matrix
+keyboard. This is recommended if the EC does not have its own logic or
+hardware for this.
-- linux,fn-keymap: a second keymap, same specification as the
- matrix-keyboard-controller spec but to be used when the KEY_FN modifier
- key is pressed.
-- google,repeat-delay-ms : delay in milliseconds before repeat starts
-- google,repeat-rate-ms : delay between each subsequent key press
-- google,ghost-filter : enable ghost filtering for this device
-Example, taken from daisy:
+Example:
cros-ec-keyb {
compatible = "google,cros-ec-keyb";
- google,key-rows = <8>;
- google,key-columns = <13>;
- google,ghost-filter;
- google,repeat-delay-ms = <240>;
- google,repeat-rate-ms = <30>;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
/*
- * Keymap entries take the form of 0xRRCCKKKK where
- * RR=Row CC=Column KKKK=Key Code
- * The values below are for a US keyboard layout and
- * are taken from the Linux driver. Note that the
- * 102ND key is not used for US keyboards.
- */
+ * Keymap entries take the form of 0xRRCCKKKK where
+ * RR=Row CC=Column KKKK=Key Code
+ * The values below are for a US keyboard layout and
+ * are taken from the Linux driver. Note that the
+ * 102ND key is not used for US keyboards.
+ */
linux,keymap = <
/* CAPSLCK F1 B F10 */
- 0x0001003a 0x0002003c 0x00030030 0x00040044
+ 0x0001003a 0x0002003b 0x00030030 0x00040044
/* N = R_ALT ESC */
0x00060031 0x0008000d 0x000a0064 0x01010001
/* F4 G F7 H */
enum {
KBC_MAX_KEYS = 8, /* Maximum keys held down at once */
+ KBC_REPEAT_RATE_MS = 30,
+ KBC_REPEAT_DELAY_MS = 240,
};
static struct keyb {
struct key_matrix matrix; /* The key matrix layer */
int key_rows; /* Number of keyboard rows */
int key_cols; /* Number of keyboard columns */
- unsigned int repeat_delay_ms; /* Time before autorepeat starts */
- unsigned int repeat_rate_ms; /* Autorepeat rate in ms */
int ghost_filter; /* 1 to enable ghost filter, else 0 */
int inited; /* 1 if keyboard is ready */
} config;
* Get keyboard rows and columns - at present we are limited to
* 8 columns by the protocol (one byte per row scan)
*/
- config->key_rows = fdtdec_get_int(blob, node, "google,key-rows", 0);
- config->key_cols = fdtdec_get_int(blob, node, "google,key-columns", 0);
+ config->key_rows = fdtdec_get_int(blob, node, "keypad,num-rows", 0);
+ config->key_cols = fdtdec_get_int(blob, node, "keypad,num-columns", 0);
if (!config->key_rows || !config->key_cols ||
config->key_rows * config->key_cols / 8
> CROS_EC_KEYSCAN_COLS) {
config->key_rows, config->key_cols);
return -1;
}
- config->repeat_delay_ms = fdtdec_get_int(blob, node,
- "google,repeat-delay-ms", 0);
- config->repeat_rate_ms = fdtdec_get_int(blob, node,
- "google,repeat-rate-ms", 0);
config->ghost_filter = fdtdec_get_bool(blob, node,
"google,ghost-filter");
return 0;
}
if (cros_ec_keyb_decode_fdt(blob, node, &config))
return -1;
- input_set_delays(&config.input, config.repeat_delay_ms,
- config.repeat_rate_ms);
+ input_set_delays(&config.input, KBC_REPEAT_DELAY_MS,
+ KBC_REPEAT_RATE_MS);
if (key_matrix_init(&config.matrix, config.key_rows,
config.key_cols, config.ghost_filter)) {
debug("%s: cannot init key matrix\n", __func__);
projects / u-boot / commitdiff