Currently only normal hashing is supported using hardware acceleration.
Added support for progressive hashing using hardware.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <yorksun@freescale.com>
select RSA
help
This option enables signature verification of FIT uImages,
- using a hash signed and verified using RSA.
+ using a hash signed and verified using RSA. If
+ CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
+ hashing is available using hardware, RSA library will use it.
See doc/uImage.FIT/signature.txt for more details.
config SYS_EXTRA_OPTIONS
Enable the hash verify command (hash -v). This adds to code
size a little.
- CONFIG_SHA1 - support SHA1 hashing
- CONFIG_SHA256 - support SHA256 hashing
+ CONFIG_SHA1 - This option enables support of hashing using SHA1
+ algorithm. The hash is calculated in software.
+ CONFIG_SHA256 - This option enables support of hashing using
+ SHA256 algorithm. The hash is calculated in software.
+ CONFIG_SHA_HW_ACCEL - This option enables hardware acceleration
+ for SHA1/SHA256 hashing.
+ This affects the 'hash' command and also the
+ hash_lookup_algo() function.
+ CONFIG_SHA_PROG_HW_ACCEL - This option enables
+ hardware-acceleration for SHA1/SHA256 progressive hashing.
+ Data can be streamed in a block at a time and the hashing
+ is performed in hardware.
Note: There is also a sha1sum command, which should perhaps
be deprecated in favour of 'hash sha1'.
CONFIG_FIT_SIGNATURE
This option enables signature verification of FIT uImages,
- using a hash signed and verified using RSA. See
- doc/uImage.FIT/signature.txt for more details.
+ using a hash signed and verified using RSA. If
+ CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
+ hashing is available using hardware, RSA library will use it.
+ See doc/uImage.FIT/signature.txt for more details.
WARNING: When relying on signed FIT images with required
signature check the legacy image format is default
SHA1_SUM_LEN,
hw_sha1,
CHUNKSZ_SHA1,
+#ifdef CONFIG_SHA_PROG_HW_ACCEL
+ hw_sha_init,
+ hw_sha_update,
+ hw_sha_finish,
+#endif
}, {
"sha256",
SHA256_SUM_LEN,
hw_sha256,
CHUNKSZ_SHA256,
+#ifdef CONFIG_SHA_PROG_HW_ACCEL
+ hw_sha_init,
+ hw_sha_update,
+ hw_sha_finish,
+#endif
},
#endif
#ifdef CONFIG_SHA1
#include "jobdesc.h"
#include "desc.h"
#include "jr.h"
+#include "fsl_hash.h"
+#include <hw_sha.h>
+#include <asm-generic/errno.h>
#define CRYPTO_MAX_ALG_NAME 80
#define SHA1_DIGEST_SIZE 20
},
};
+static enum caam_hash_algos get_hash_type(struct hash_algo *algo)
+{
+ if (!strcmp(algo->name, driver_hash[SHA1].name))
+ return SHA1;
+ else
+ return SHA256;
+}
+
+/* Create the context for progressive hashing using h/w acceleration.
+ *
+ * @ctxp: Pointer to the pointer of the context for hashing
+ * @caam_algo: Enum for SHA1 or SHA256
+ * @return 0 if ok, -ENOMEM on error
+ */
+static int caam_hash_init(void **ctxp, enum caam_hash_algos caam_algo)
+{
+ *ctxp = calloc(1, sizeof(struct sha_ctx));
+ if (*ctxp == NULL) {
+ debug("Cannot allocate memory for context\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/*
+ * Update sg table for progressive hashing using h/w acceleration
+ *
+ * The context is freed by this function if an error occurs.
+ * We support at most 32 Scatter/Gather Entries.
+ *
+ * @hash_ctx: Pointer to the context for hashing
+ * @buf: Pointer to the buffer being hashed
+ * @size: Size of the buffer being hashed
+ * @is_last: 1 if this is the last update; 0 otherwise
+ * @caam_algo: Enum for SHA1 or SHA256
+ * @return 0 if ok, -EINVAL on error
+ */
+static int caam_hash_update(void *hash_ctx, const void *buf,
+ unsigned int size, int is_last,
+ enum caam_hash_algos caam_algo)
+{
+ uint32_t final = 0;
+ dma_addr_t addr = virt_to_phys((void *)buf);
+ struct sha_ctx *ctx = hash_ctx;
+
+ if (ctx->sg_num >= MAX_SG_32) {
+ free(ctx);
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_PHYS_64BIT
+ ctx->sg_tbl[ctx->sg_num].addr_hi = addr >> 32;
+#else
+ ctx->sg_tbl[ctx->sg_num].addr_hi = 0x0;
+#endif
+ ctx->sg_tbl[ctx->sg_num].addr_lo = addr;
+
+ sec_out32(&ctx->sg_tbl[ctx->sg_num].len_flag,
+ (size & SG_ENTRY_LENGTH_MASK));
+
+ ctx->sg_num++;
+
+ if (is_last) {
+ final = sec_in32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag) |
+ SG_ENTRY_FINAL_BIT;
+ sec_out32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag, final);
+ }
+
+ return 0;
+}
+
+/*
+ * Perform progressive hashing on the given buffer and copy hash at
+ * destination buffer
+ *
+ * The context is freed after completion of hash operation.
+ *
+ * @hash_ctx: Pointer to the context for hashing
+ * @dest_buf: Pointer to the destination buffer where hash is to be copied
+ * @size: Size of the buffer being hashed
+ * @caam_algo: Enum for SHA1 or SHA256
+ * @return 0 if ok, -EINVAL on error
+ */
+static int caam_hash_finish(void *hash_ctx, void *dest_buf,
+ int size, enum caam_hash_algos caam_algo)
+{
+ uint32_t len = 0;
+ struct sha_ctx *ctx = hash_ctx;
+ int i = 0, ret = 0;
+
+ if (size < driver_hash[caam_algo].digestsize) {
+ free(ctx);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ctx->sg_num; i++)
+ len += (sec_in32(&ctx->sg_tbl[i].len_flag) &
+ SG_ENTRY_LENGTH_MASK);
+
+ inline_cnstr_jobdesc_hash(ctx->sha_desc, (uint8_t *)ctx->sg_tbl, len,
+ ctx->hash,
+ driver_hash[caam_algo].alg_type,
+ driver_hash[caam_algo].digestsize,
+ 1);
+
+ ret = run_descriptor_jr(ctx->sha_desc);
+
+ if (ret)
+ debug("Error %x\n", ret);
+ else
+ memcpy(dest_buf, ctx->hash, sizeof(ctx->hash));
+
+ free(ctx);
+ return ret;
+}
+
int caam_hash(const unsigned char *pbuf, unsigned int buf_len,
unsigned char *pout, enum caam_hash_algos algo)
{
desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE);
if (!desc) {
debug("Not enough memory for descriptor allocation\n");
- return -1;
+ return -ENOMEM;
}
inline_cnstr_jobdesc_hash(desc, pbuf, buf_len, pout,
if (caam_hash(pbuf, buf_len, pout, SHA1))
printf("CAAM was not setup properly or it is faulty\n");
}
+
+int hw_sha_init(struct hash_algo *algo, void **ctxp)
+{
+ return caam_hash_init(ctxp, get_hash_type(algo));
+}
+
+int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf,
+ unsigned int size, int is_last)
+{
+ return caam_hash_update(ctx, buf, size, is_last, get_hash_type(algo));
+}
+
+int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf,
+ int size)
+{
+ return caam_hash_finish(ctx, dest_buf, size, get_hash_type(algo));
+}
--- /dev/null
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef _SHA_H
+#define _SHA_H
+
+#include <fsl_sec.h>
+#include <hash.h>
+#include "jr.h"
+
+/* We support at most 32 Scatter/Gather Entries.*/
+#define MAX_SG_32 32
+
+/*
+ * Hash context contains the following fields
+ * @sha_desc: Sha Descriptor
+ * @sg_num: number of entries in sg table
+ * @len: total length of buffer
+ * @sg_tbl: sg entry table
+ * @hash: index to the hash calculated
+ */
+struct sha_ctx {
+ uint32_t sha_desc[64];
+ uint32_t sg_num;
+ uint32_t len;
+ struct sg_entry sg_tbl[MAX_SG_32];
+ u8 hash[HASH_MAX_DIGEST_SIZE];
+};
+
+#endif
u32 jrcr;
};
+/*
+ * Scatter Gather Entry - Specifies the the Scatter Gather Format
+ * related information
+ */
+struct sg_entry {
+#ifdef CONFIG_SYS_FSL_SEC_LE
+ uint32_t addr_lo; /* Memory Address - lo */
+ uint16_t addr_hi; /* Memory Address of start of buffer - hi */
+ uint16_t reserved_zero;
+#else
+ uint16_t reserved_zero;
+ uint16_t addr_hi; /* Memory Address of start of buffer - hi */
+ uint32_t addr_lo; /* Memory Address - lo */
+#endif
+
+ uint32_t len_flag; /* Length of the data in the frame */
+#define SG_ENTRY_LENGTH_MASK 0x3FFFFFFF
+#define SG_ENTRY_EXTENSION_BIT 0x80000000
+#define SG_ENTRY_FINAL_BIT 0x40000000
+ uint32_t bpid_offset;
+#define SG_ENTRY_BPID_MASK 0x00FF0000
+#define SG_ENTRY_BPID_SHIFT 16
+#define SG_ENTRY_OFFSET_MASK 0x00001FFF
+#define SG_ENTRY_OFFSET_SHIFT 0
+};
+
int sec_init(void);
#endif
*/
#ifndef __HW_SHA_H
#define __HW_SHA_H
-
+#include <hash.h>
/**
* Computes hash value of input pbuf using h/w acceleration
*/
void hw_sha1(const uchar * in_addr, uint buflen,
uchar * out_addr, uint chunk_size);
+
+/*
+ * Create the context for sha progressive hashing using h/w acceleration
+ *
+ * @algo: Pointer to the hash_algo struct
+ * @ctxp: Pointer to the pointer of the context for hashing
+ * @return 0 if ok, -ve on error
+ */
+int hw_sha_init(struct hash_algo *algo, void **ctxp);
+
+/*
+ * Update buffer for sha progressive hashing using h/w acceleration
+ *
+ * The context is freed by this function if an error occurs.
+ *
+ * @algo: Pointer to the hash_algo struct
+ * @ctx: Pointer to the context for hashing
+ * @buf: Pointer to the buffer being hashed
+ * @size: Size of the buffer being hashed
+ * @is_last: 1 if this is the last update; 0 otherwise
+ * @return 0 if ok, -ve on error
+ */
+int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf,
+ unsigned int size, int is_last);
+
+/*
+ * Copy sha hash result at destination location
+ *
+ * The context is freed after completion of hash operation or after an error.
+ *
+ * @algo: Pointer to the hash_algo struct
+ * @ctx: Pointer to the context for hashing
+ * @dest_buf: Pointer to the destination buffer where hash is to be copied
+ * @size: Size of the buffer being hashed
+ * @return 0 if ok, -ve on error
+ */
+int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf,
+ int size);
+
#endif
source lib/rsa/Kconfig
+menu "Hashing Support"
+
+config SHA1
+ bool "Enable SHA1 support"
+ help
+ This option enables support of hashing using SHA1 algorithm.
+ The hash is calculated in software.
+ The SHA1 algorithm produces a 160-bit (20-byte) hash value
+ (digest).
+
+config SHA256
+ bool "Enable SHA256 support"
+ help
+ This option enables support of hashing using SHA256 algorithm.
+ The hash is calculated in software.
+ The SHA256 algorithm produces a 256-bit (32-byte) hash value
+ (digest).
+
+config SHA_HW_ACCEL
+ bool "Enable hashing using hardware"
+ help
+ This option enables hardware acceleration
+ for SHA1/SHA256 hashing.
+ This affects the 'hash' command and also the
+ hash_lookup_algo() function.
+
+config SHA_PROG_HW_ACCEL
+ bool "Enable Progressive hashing support using hardware"
+ depends on SHA_HW_ACCEL
+ help
+ This option enables hardware-acceleration for
+ SHA1/SHA256 progressive hashing.
+ Data can be streamed in a block at a time and the hashing
+ is performed in hardware.
+endmenu
+
endmenu
projects / u-boot / commitdiff