fec_mxc: add support for MX53 processor

This patch add FEC support for Freescale MX53 processor

Signed-off-by: Jason Liu <r64343@freescale.com>

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index c4389629a9c0b130f85aac9631bfc77ba07511fb..4e4cd2749f6c1ec43642e3e3973e8161f9ecf22d 100644 (file)
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -354,7 +354,7 @@ static int fec_open(struct eth_device *edev)
         */
        writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
                &fec->eth->ecntrl);
-#ifdef CONFIG_MX25
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
        udelay(100);
        /*
         * setup the MII gasket for RMII mode

diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 5d0d69d5e9a8f9720721b6801ef4a92fc335cd7c..1ba51617ddf39fc2bb0d22e43b9477367c5a647e 100644 (file)
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -147,7 +147,7 @@ struct ethernet_regs {
 
        uint32_t res14[7];              /* MBAR_ETH + 0x2E4-2FC */
 
-#ifdef CONFIG_MX25
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
        uint16_t miigsk_cfgr;           /* MBAR_ETH + 0x300 */
        uint16_t res15[3];              /* MBAR_ETH + 0x302-306 */
        uint16_t miigsk_enr;            /* MBAR_ETH + 0x308 */
@@ -204,7 +204,7 @@ struct ethernet_regs {
 #define FEC_ECNTRL_RESET               0x00000001      /* reset the FEC */
 #define FEC_ECNTRL_ETHER_EN            0x00000002      /* enable the FEC */
 
-#ifdef CONFIG_MX25
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
 /* defines for MIIGSK */
 /* RMII frequency control: 0=50MHz, 1=5MHz */
 #define MIIGSK_CFGR_FRCONT             (1 << 6)