Remove unused and unconfigured DDR test code from FSL 85xx boards.
Besides, other common code exists.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
        udelay(100);
 }
 
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("SDRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("SDRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("SDRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("SDRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("SDRAM test passed.\n");
-       return 0;
-}
-#endif
-
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
 
 #endif /* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("Testing DRAM from 0x%08x to 0x%08x\n",
-              CFG_MEMTEST_START,
-              CFG_MEMTEST_END);
-
-       printf("DRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test passed.\n");
-       return 0;
-}
-#endif
-
 #if defined(CONFIG_PCI)
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it.
 
        return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("Testing DRAM from 0x%08x to 0x%08x\n",
-              CFG_MEMTEST_START,
-              CFG_MEMTEST_END);
-
-       printf("DRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test passed.\n");
-       return 0;
-}
-#endif
-
 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
 #endif
 
 #endif /* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("Testing DRAM from 0x%08x to 0x%08x\n",
-              CFG_MEMTEST_START,
-              CFG_MEMTEST_END);
-
-       printf("DRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test passed.\n");
-       return 0;
-}
-#endif
-
 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it.
 
 #endif /* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("Testing DRAM from 0x%08x to 0x%08x\n",
-              CFG_MEMTEST_START,
-              CFG_MEMTEST_END);
-
-       printf("DRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test passed.\n");
-       return 0;
-}
-#endif
-
 #ifdef CONFIG_PCI
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it
 
        udelay(100);
 }
 
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("SDRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("SDRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("SDRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("SDRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("SDRAM test passed.\n");
-       return 0;
-}
-#endif
-
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
 
 #endif /* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-       uint *pstart = (uint *) CFG_MEMTEST_START;
-       uint *pend = (uint *) CFG_MEMTEST_END;
-       uint *p;
-
-       printf("Testing DRAM from 0x%08x to 0x%08x\n",
-              CFG_MEMTEST_START,
-              CFG_MEMTEST_END);
-
-       printf("DRAM test phase 1:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test phase 2:\n");
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("DRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       printf("DRAM test passed.\n");
-       return 0;
-}
-#endif
-
 #if defined(CONFIG_PCI)
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc8568mds_config_table[] = {
 
 
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest region */
 #define CFG_MEMTEST_END                0x00400000
 
 
 
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest works on */
 #define CFG_MEMTEST_END                0x00400000
 
 
 
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest works on */
 #define CFG_MEMTEST_END                0x00400000
-#define CFG_ALT_MEMTEST
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 /*
 
 
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest works on */
 #define CFG_MEMTEST_END                0x00400000
 
 
 
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest works on */
 #define CFG_MEMTEST_END                0x00400000
 
 
 
 #define CFG_INIT_DBCR DBCR_IDM         /* Enable Debug Exceptions */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest region */
 #define CFG_MEMTEST_END                0x00400000
 
 
 
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
 
-#undef CFG_DRAM_TEST                   /* memory test, takes time */
 #define CFG_MEMTEST_START      0x00200000      /* memtest works on */
 #define CFG_MEMTEST_END                0x00400000