Blackfin: bf527-ezkit: video: convert from old style MMR macros

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c
index 51bdf020413dd804a69353e9e3b09708ed95e717..87e7658b4df7a2ba460aac6fb83426b5d127fc1f 100644 (file)
--- a/board/bf527-ezkit/video.c
+++ b/board/bf527-ezkit/video.c
@@ -162,12 +162,12 @@ static int lq035q1_control(unsigned char reg, unsigned short value)
 /* enable and disable PPI functions */
 void EnablePPI(void)
 {
-       *pPPI_CONTROL |= PORT_EN;
+       bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
 }
 
 void DisablePPI(void)
 {
-       *pPPI_CONTROL &= ~PORT_EN;
+       bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
 }
 
 void Init_Ports(void)
@@ -182,119 +182,123 @@ void Init_Ports(void)
 void Init_PPI(void)
 {
 
-       *pPPI_DELAY = H_START;
-       *pPPI_COUNT = (H_ACTPIX-1);
-       *pPPI_FRAME = V_LINES;
+       bfin_write_PPI_DELAY(H_START);
+       bfin_write_PPI_COUNT(H_ACTPIX - 1);
+       bfin_write_PPI_FRAME(V_LINES);
 
        /* PPI control, to be replaced with definitions */
-       *pPPI_CONTROL = PPI_TX_MODE             |       /* output mode , PORT_DIR */
+       bfin_write_PPI_CONTROL(
+                       PPI_TX_MODE             |       /* output mode , PORT_DIR */
                        PPI_XFER_TYPE_11        |       /* sync mode XFR_TYPE */
                        PPI_PORT_CFG_01         |       /* two frame sync PORT_CFG */
                        PPI_PACK_EN             |       /* packing enabled PACK_EN */
-                       PPI_POLS_1;                     /* faling edge syncs POLS */
+                       PPI_POLS_1                      /* faling edge syncs POLS */
+       );
 }
 
 void Init_DMA(void *dst)
 {
-       *pDMA0_START_ADDR = dst;
+       bfin_write_DMA0_START_ADDR(dst);
 
        /* X count */
-       *pDMA0_X_COUNT = H_ACTPIX / 2;
-       *pDMA0_X_MODIFY = DMA_BUS_SIZE / 8;
+       bfin_write_DMA0_X_COUNT(H_ACTPIX / 2);
+       bfin_write_DMA0_X_MODIFY(DMA_BUS_SIZE / 8);
 
        /* Y count */
-       *pDMA0_Y_COUNT = V_LINES;
-       *pDMA0_Y_MODIFY = DMA_BUS_SIZE / 8;
+       bfin_write_DMA0_Y_COUNT(V_LINES);
+       bfin_write_DMA0_Y_MODIFY(DMA_BUS_SIZE / 8);
 
        /* DMA Config */
-       *pDMA0_CONFIG =
+       bfin_write_DMA0_CONFIG(
                WDSIZE_16       |       /* 16 bit DMA */
                DMA2D           |       /* 2D DMA */
-               FLOW_AUTO;              /* autobuffer mode */
+               FLOW_AUTO               /* autobuffer mode */
+       );
 }
 
-
 void EnableDMA(void)
 {
-       *pDMA0_CONFIG |= DMAEN;
+       bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() | DMAEN);
 }
 
 void DisableDMA(void)
 {
-       *pDMA0_CONFIG &= ~DMAEN;
+       bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() & ~DMAEN);
 }
 
-
 /* Init TIMER0 as Frame Sync 1 generator */
 void InitTIMER0(void)
 {
-       *pTIMER_DISABLE |= TIMDIS0;                     /* disable Timer */
+       bfin_write_TIMER_DISABLE(TIMDIS0);                      /* disable Timer */
        SSYNC();
-       *pTIMER_STATUS  |= TIMIL0 | TOVF_ERR0 | TRUN0;  /* clear status */
+       bfin_write_TIMER_STATUS(TIMIL0 | TOVF_ERR0 | TRUN0);    /* clear status */
        SSYNC();
 
-       *pTIMER0_PERIOD  = H_PERIOD;
+       bfin_write_TIMER0_PERIOD(H_PERIOD);
        SSYNC();
-       *pTIMER0_WIDTH   = H_PULSE;
+       bfin_write_TIMER0_WIDTH(H_PULSE);
        SSYNC();
 
-       *pTIMER0_CONFIG  = PWM_OUT |
+       bfin_write_TIMER0_CONFIG(
+                               PWM_OUT |
                                PERIOD_CNT   |
                                TIN_SEL      |
                                CLK_SEL      |
-                               EMU_RUN;
+                               EMU_RUN
+       );
        SSYNC();
 }
 
 void EnableTIMER0(void)
 {
-       *pTIMER_ENABLE  |= TIMEN0;
+       bfin_write_TIMER_ENABLE(TIMEN0);
        SSYNC();
 }
 
 void DisableTIMER0(void)
 {
-       *pTIMER_DISABLE  |= TIMDIS0;
+       bfin_write_TIMER_DISABLE(TIMDIS0);
        SSYNC();
 }
 
 
 void InitTIMER1(void)
 {
-       *pTIMER_DISABLE |= TIMDIS1;                     /* disable Timer */
+       bfin_write_TIMER_DISABLE(TIMDIS1);                      /* disable Timer */
        SSYNC();
-       *pTIMER_STATUS  |= TIMIL1 | TOVF_ERR1 | TRUN1;  /* clear status */
+       bfin_write_TIMER_STATUS(TIMIL1 | TOVF_ERR1 | TRUN1);    /* clear status */
        SSYNC();
 
-
-       *pTIMER1_PERIOD  = V_PERIOD;
+       bfin_write_TIMER1_PERIOD(V_PERIOD);
        SSYNC();
-       *pTIMER1_WIDTH   = V_PULSE;
+       bfin_write_TIMER1_WIDTH(V_PULSE);
        SSYNC();
 
-       *pTIMER1_CONFIG  = PWM_OUT |
+       bfin_write_TIMER1_CONFIG(
+                               PWM_OUT |
                                PERIOD_CNT   |
                                TIN_SEL      |
                                CLK_SEL      |
-                               EMU_RUN;
+                               EMU_RUN
+       );
        SSYNC();
 }
 
 void EnableTIMER1(void)
 {
-       *pTIMER_ENABLE  |= TIMEN1;
+       bfin_write_TIMER_ENABLE(TIMEN1);
        SSYNC();
 }
 
 void DisableTIMER1(void)
 {
-       *pTIMER_DISABLE  |= TIMDIS1;
+       bfin_write_TIMER_DISABLE(TIMDIS1);
        SSYNC();
 }
 
 void EnableTIMER12(void)
 {
-       *pTIMER_ENABLE |= TIMEN1 | TIMEN0;
+       bfin_write_TIMER_ENABLE(TIMEN1 | TIMEN0);
        SSYNC();
 }