return 0;
}
+int board_late_init(void)
+{
+ switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
+ IMX6_BMODE_SHIFT) {
+ case IMX6_BMODE_SD:
+ case IMX6_BMODE_ESD:
+ setenv("modeboot", "mmcboot");
+ break;
+ case IMX6_BMODE_NAND:
+ setenv("modeboot", "nandboot");
+ break;
+ default:
+ setenv("modeboot", "");
+ break;
+ }
+
+ return 0;
+}
+
int board_init(void)
{
/* Address of boot parameters */
"fitboot=echo Booting FIT image from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
- "mmcboot=echo Booting from mmc ...; " \
+ "_mmcboot=run mmcargs; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"else " \
"bootm; " \
"fi\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadfit; then " \
+ "run fitboot; " \
+ "else " \
+ "if run loadimage; then " \
+ "run _mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi\0" \
"nandboot=echo Booting from nand ...; " \
"if mtdparts; then " \
"echo Starting nand boot ...; " \
"nand read ${fdt_addr} dtb 0x100000; " \
"bootm ${loadaddr} - ${fdt_addr}\0"
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_BOOTCOMMAND "run nandboot"
-#else
-# define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi"
-#endif
+#define CONFIG_BOOTCOMMAND "run $modeboot"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000