]> git.sur5r.net Git - u-boot/commitdiff
Minor fixes to PM854 board
authorWolfgang Denk <wd@pollux.denx.de>
Fri, 5 Aug 2005 09:47:10 +0000 (11:47 +0200)
committerWolfgang Denk <wd@pollux.denx.de>
Fri, 5 Aug 2005 09:47:10 +0000 (11:47 +0200)
Patch by Josef Wagner, 03 Aug 2005

CHANGELOG
board/pm854/Makefile
include/configs/PM854.h

index 48c6ef877ac8c84bd1b394b340d6644c18d21a5c..c2b601bff0c9cc15432097e53273be61ba3cfd68 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Minor fixes to PM854 board
+  Patch by Josef Wagner, 03 Aug 2005
+
 * Adjust configuration of XENIAX board
   (chip select and GPIO required for USB operation)
 
index c6b4cae216f31267e43f0bfc7969bd9a953abb20..78281660d6715785da44cb1392ec916f7e770a45 100644 (file)
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB    = lib$(BOARD).a
 
-OBJS   := $(BOARD).o flash.o
+OBJS   := $(BOARD).o
 SOBJS  := init.o
 #SOBJS :=
 
index 69e1bafcfda61a82afd8eedc7e10f1adc795c46a..b3e1f5e98ee03f0df622254d017811c29ad501a4 100644 (file)
     /*
      * Determine DDR configuration from I2C interface.
      */
-    #define SPD_EEPROM_ADDRESS 0x51            /* DDR DIMM */
+    #define SPD_EEPROM_ADDRESS 0x58            /* DDR DIMM */
 
 #else
     /*
 #undef CFG_RAMBOOT
 #endif
 
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
 /*
  * Local Bus Definitions
  */
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1   1
 #define CONFIG_MPC85XX_TSEC2   1
-#define TSEC1_PHY_ADDR         2
-#define TSEC2_PHY_ADDR         3
+#define TSEC1_PHY_ADDR         0
+#define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
 
 #define CONFIG_MPC85XX_FEC     1
-#define FEC_PHY_ADDR           1
+#define FEC_PHY_ADDR           3
 #define FEC_PHYIDX             0
 
-#define CONFIG_ETHPRIME                "MOTO ENET0"
+#define CONFIG_ETHPRIME                "ENET0"
 
 #define        CONFIG_HAS_ETH1         1
 #define        CONFIG_HAS_ETH2         1
 #define CONFIG_ETH2ADDR         00:40:42:01:00:02
 #endif
 
-#define CONFIG_IPADDR   192.168.0.103
 
-#define CONFIG_HOSTNAME                PM854
-#define CONFIG_ROOTPATH                /opt/eldk30/ppc_82xx
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_ROOTPATH                /opt/eldk/ppc_85xx
+#define CONFIG_BOOTFILE                pm854/uImage
 
-#define CONFIG_SERVERIP         192.168.0.54
+#define CONFIG_HOSTNAME                pm854
+#define CONFIG_IPADDR   192.168.0.103
+#define CONFIG_SERVERIP         192.168.0.64
 #define CONFIG_GATEWAYIP 192.168.0.1
 #define CONFIG_NETMASK  255.255.255.0
 
    "netdev=eth0\0"                                                     \
    "consoledev=ttyS0\0"                                                        \
    "ramdiskaddr=400000\0"                                              \
-   "ramdiskfile=uRamdisk\0"
+   "ramdiskfile=pm854/uRamdisk\0"
 
 #define CONFIG_NFSBOOTCOMMAND                                          \
    "setenv bootargs root=/dev/nfs rw "                                 \