{
int ret;
+ /*
+ * The IRQ0 on Rev 2 is pulled high (low in Rev 1.x) to
+ * implement PEX10 errata. As INT is active high, it
+ * will cause core to take 0x500 interrupt.
+ *
+ * Due to the PIC's default pass through mode, as soon
+ * as interrupts are enabled (MSR[EE] = 1), an interrupt
+ * will be taken and u-boot will hang. This is due to a
+ * hardware change (per an errata fix) on new revisions
+ * of the board with Rev 2.x parts.
+ *
+ * Setting the PIC to mixed mode prevents the hang.
+ */
+ if ((get_svr() & 0xf0) == 0x20) {
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ immr->im_pic.gcr = MPC86xx_PICGCR_RST;
+ while (immr->im_pic.gcr & MPC86xx_PICGCR_RST);
+ immr->im_pic.gcr = MPC86xx_PICGCR_MODE;
+ }
+
/* call cpu specific function from $(CPU)/interrupts.c */
ret = interrupt_init_cpu(&decrementer_count);
uint frr; /* 0x41000 - Feature Reporting Register */
char res10[28];
uint gcr; /* 0x41020 - Global Configuration Register */
+#define MPC86xx_PICGCR_RST 0x80000000
+#define MPC86xx_PICGCR_MODE 0x20000000
char res11[92];
uint vir; /* 0x41080 - Vendor Identification Register */
char res12[12];