+commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 21:34:34 2007 +0200
+
+ Minor alignment of output, 2nd try.
+ Also update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b309f22a724fad8418e811751a0741b893419cf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 20:35:49 2007 +0200
+
+ Minor alignment of output
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 18:28:18 2007 +0200
+
+ Cleanup output on ADS5121 board
+
+ Signed-off-by: Wolfgang Denk
+
+commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 15:11:38 2007 +0200
+
+ Adapt board configuration and fix kernel crash on MCC200 board.
+
+ The update procedure was modified to turn off the USB subsystem
+ before exit for MCC200 and TRAB. This is necessary as otherwise the
+ USB controller continues to write periodically to system memory!
+
+ MCC200-specific notes:
+ - the patch disables the magic key check for MCC200
+ - the patch contains the configuration changes made
+ for the new revision of the board.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 14:47:54 2007 +0200
+
+ Adjust default configuration of ADS5121 board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 14:27:39 2007 +0200
+
+ Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5fe6be6208dda852c3564e384bd78d75784dea3e
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Aug 7 21:14:22 2007 -0400
+
+ Improve error print messages.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 17 13:57:04 2007 -0500
+
+ fdt: allow for builds that don't want env and bd_t nodes
+
+ protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
+ area.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 91148bf7aeba142d6f348805db7625db7da64d6f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 17 13:56:53 2007 -0500
+
+ fdt: do board setup based on fdt address specified on bootm line
+
+ The last fdt patch to bootm did board setup based on the address
+ specified by a prior fdt address command invocation. The bootm
+ code, as its call to fdt_chosen does, should use the fdt specified
+ by the user on the bootm command. Note this restores full
+ functionality for the 8360's existing default boot environment
+ values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
+ before booting a kernel).
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e125a2ffc209dd34794e326c7175658253beadf3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jul 10 20:40:39 2007 -0400
+
+ Call ft_board_setup() from the bootm command.
+
+ In the patch titled "Create new fdt boardsetup command..." I removed the
+ call to ft_board_setup() from the routine fdt_chosen(), but I forgot
+ to add a direct call back into cmd_bootm.c
+
+ This fixes the oversight by adding the direct call to the bootm command.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 23:25:28 2007 -0400
+
+ Create new fdt boardsetup command, fix bug parsing [] form of set values.
+
+ Previously ft_board_setup() was called by fdt_chosen() which was not
+ really correctly structured. This splits ft_board_setup() out by creating
+ a new fdt boardsetup command.
+
+ Fix a bug when parsing fdt set command values which have the square
+ bracket form [00 11 22 33] - the length was updated incorrectly in when
+ parsing that form.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 6f35ded9e85493595e0eb66a82b502a95326d049
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 20:55:58 2007 -0400
+
+ Tighten up the error messages.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit c45874b05aae897a6c29d1a97d4bb708fca2756c
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 19:52:23 2007 -0400
+
+ Asthetic improvements: error messages and line lengths.
+
+ Tighten up the error messages, split overlength lines.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri May 25 22:08:57 2007 -0400
+
+ Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
+
+ The fdt_chosen() function was adding/seting some properties ad-hoc
+ improperly and duplicated (poorly) what was done in ft_board_setup()
+
+ Clean up long lines (setting properties, printing errors).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 06e19a07701c968f15d72c083b5872a1a11c7b01
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon May 21 23:27:16 2007 -0400
+
+ For fdt_find_node_by_path(), handle the root path properly.
+
+ Also removes the special case root path detection in cmd_fdt.c since it
+ is no longer necessary.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu May 17 23:54:36 2007 -0400
+
+ Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1a861169bc3758f9de3aead62b058736c6891246
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Jun 6 22:47:58 2007 -0400
+
+ Replace fdt_node_offset() with fdt_find_node_by_path().
+
+ The new name matches more closely the kernel's name, which is also
+ a much better description.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed May 16 22:39:59 2007 -0400
+
+ Fix cmd_fdt line lengths, refactor code.
+
+ Break lines that were greater than 80 characters in length.
+ Move the fdt print and property parsing code to separate static functions
+ to reduce coding clutter in the fdt_cmd handling body.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 25114033ab21788810c48ba4df103b649da1223b
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat May 12 09:47:25 2007 -0400
+
+ FDT command improvements.
+
+ Fix "fdt set" so that it will create a non-existing property.
+ Add "fdt mknode" to create nodes.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 38eb508e8e811e2e57628f445de3a24a23c7d804
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat May 12 09:45:46 2007 -0400
+
+ Reorganize and fix problems (returns) in the bootm command.
+
+ Do *NOT* return after the "point of no return" has been passed.
+ If something goes wrong, the board must be reset after that point.
+ Move the "Transferring control to Linux" debug message back to where it
+ belongs: just before transferring control to linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 89c8757d8f213c47709bdc4efe0695263a6080a6
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue May 8 21:27:35 2007 -0400
+
+ Fix bugs in the CONFIG_OF_LIBFDT
+
+ Stupid coding mistakes (identified by Timur Tabi, thanks).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 22:47:15 2007 -0400
+
+ Improve fdt move length handling.
+
+ Make the length parameter optional: if not specified, do the move using
+ the current size unchanged.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 22:23:36 2007 -0400
+
+ Minor code clean up.
+
+ Declare the variable fdt properly as extern.
+ Call the "set_fn" function pointer the "short way" without the full
+ dereferencing syntax.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 21:24:27 2007 -0400
+
+ Improve error messages, more informative.
+
+ Print more than the raw libfdt error message strings. This is especially
+ useful for cluing in the user when the bootm command aborts due to
+ blob problems.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 20 22:46:53 2007 -0400
+
+ libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
+
+ This is the way u-boot reduces configured-out code. At Wolfgang
+ Grandegger and Wolfgang Denk's request, make libfdt conform.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 923efd286411ed052d9e074f59f8986d6081061c
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Aug 10 14:54:47 2007 -0700
+
+ add image size and descriptors for Spartan 3E FPGA chips
+
+ Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
+
+ Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
+
+commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 15:34:48 2007 -0500
+
+ make MAKEALL more immune to merge conflicts
+
+ ..by placing board entries one per line, as suggested by jdl.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 13:28:25 2007 -0500
+
+ README: Remove outdated cpu type, board type, and NAME_config lists
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49bb59912d21aacb507eb81fd21fb7af650c706c
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Aug 10 15:48:59 2007 +0800
+
+ mpc83xx: Suppress the warning 'burstlen'
+
+ suppress the warning 'burstlen' of spd_sdram.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c2c0ab4aff86622b837a48a0e560351f9afafb95
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 20:34:58 2007 +0200
+
+ Conding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
+Author: Sergey Kubushyn <ksi@koi8.net>
+Date: Fri Aug 10 20:26:18 2007 +0200
+
+ [ARM] TI DaVinci support, hopefully final
+
+ Add support for the following DaVinci boards:
+ - DV_EVM
+ - SCHMOOGIE
+ - SONATA
+
+ Changes:
+
+ - Split into separate board directories
+ - Removed changes to MTD_DEBUG (or whatever it's called)
+ - New CONFIG_CMD party line followed
+ - Some cosmetic fixes, cleanup etc.
+ - Patches against the latest U-Boot tree as of now.
+ - Fixed CONFIG_CMD_NET in net files.
+ - Fixed CONFIG_CMD_EEPROM for schmoogie.
+ - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
+ DV_EVM. Can't check if it works on SONATA, don't have a board any more,
+ but it at least compiles.
+
+ Here is an excerpt from session log on SCHMOOGIE...
+
+ U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
+
+ DRAM: 128 MB
+ NAND: 128 MiB
+ In: serial
+ Out: serial
+ Err: serial
+ ARM Clock : 297MHz
+ DDR Clock : 162MHz
+ ETH PHY : DP83848 @ 0x01
+ U-Boot > iprobe
+ Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
+ U-Boot > ping 192.168.253.10
+ host 192.168.253.10 is alive
+ U-Boot >
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+ Acked-by: Dirk Behme <dirk.behme@gmail.com>
+ Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Aug 2 17:42:08 2007 +0200
+
+ Make use of generic 64bit division in nand_util.c
+
+ Use generic 64bit division in nand_util.c. This makes nand_util.c
+ independent of any toolchain 64bit division.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit f7c086e94e8ce9aad7268af97f73aa6884686f27
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Aug 2 17:41:14 2007 +0200
+
+ Move 64bit division from avr32 to generic lib
+
+ Move the 64bit division from lib_avr32 to lib_generic. With this, all
+ boards can do_div/__div64_32 if needed, not only avr one. Code is put
+ to lib_generic, so no larger memory footprint if not used. No code
+ modifications. Thanks for proposal by Håvard Skinnemoen.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 6 18:18:34 2007 -0500
+
+ mpc83xx: fix ITX[GP] O=builddir builds
+
+ make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
+
+ Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
+ "BUILD_DIR=<some dir> ./MAKEALL ..."
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Aug 1 15:00:59 2007 +0800
+
+ mpc83xx: Correct the README for DDR ECC
+
+ Update the README for DDR ECC, change the name
+ to README.mpc83xx.ddrecc.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Aug 1 15:00:15 2007 +0800
+
+ mpc83xx: Consolidate the ECC support of 83xx
+
+ Remove the duplicated source code of ecc command on the <board>.c,
+ for reused, move these code to cpu/mpc83xx directory.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 036575c544cf1b69654d8fb334bda69c6ff3da36
+Author: Dave Liu <r63238@freescale.com>
+Date: Sat Aug 4 13:37:39 2007 +0800
+
+ mpc83xx: Correct the burst length for DDR2 with 32 bits
+
+ The burst length should be 4 for DDR2 with 32 bits bus
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:33 2007 -0500
+
+ mpc83xx: add support for the MPC8323E RDB
+
+ MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
+ five 10/100 ethernet ports connected via an ICPlus IP175C
+ switch, one PCI slot, and serial. Features not supported
+ in this patch are SD card interface, 2 USB ports, and the
+ two phone ports.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:28 2007 -0500
+
+ mpc83xx: fixup generic pci for libfdt
+
+ add libfdt support to the generic 83xx pci code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f57ac7a7b37109245b69db80839ebee26179966a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:22 2007 -0500
+
+ mpc83xx: fix 8360 and cpu functions to update fdt being passed
+
+ ..and not the global fdt. Rename local fdt vars to blob so as not to
+ be confused with the global var with the same three-letter name.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 4 21:34:24 2007 -0400
+
+ mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
+
+ Several node strings were not correct (trailing slashes and properties
+ in the strings)
+ Added setting of the timebase-frequency.
+ Improved error messages and use debug() instead of printf().
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 26d02c9bbac1751c5e19294f000100b48d43a920
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 4 21:27:30 2007 -0400
+
+ mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
+
+ The new name matches more closely the kernel's name, which is also
+ a much better description.
+
+ These are the mpc83xx changes made necessary by the function name change.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9be39a67c9f8fef7107f5df09d673005f04d0963
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 10:41:56 2007 +0800
+
+ mpc83xx: Add support for the display of reset status
+
+ 83xx processor family has many reset sources, such as
+ power on reset, software hard reset, software soft reset,
+ JTAG, bus monitor, software watchdog, check stop reset,
+ external hard reset, external software reset.
+ sometimes, to figure out the fault of system, we need to
+ know the cause of reset early before the prompt of
+ u-boot present.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 10:41:04 2007 +0800
+
+ mpc83xx: Fix the align bug of SDMA buffer
+
+ According to the latest user manual, the SDMA temporary
+ buffer base address must be 4KB aligned.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 13:21:12 2007 +0800
+
+ mpc83xx: Revise the MPC8360EMDS readme doc
+
+ When the rev2.x silicon mount on the MPC8360EMDS baord,
+ and if you are using the u-boot version after the commit
+ 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
+ to make the ethernet interface usable, we have to setup
+ the jumpers correctly.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jul 3 13:46:32 2007 -0500
+
+ FSL I2C driver programs the two I2C busses differently
+
+ The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
+ The second I2C bus has its slave address programmed incorrectly and is
+ missing a 5-us delay.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jul 3 13:04:34 2007 -0500
+
+ Update SCCR programming in cpu_init_f() to support all 83xx processors
+
+ Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
+ bitfields for all 83xx processors. The code to update some bitfields was
+ compiled only on some processors. Now, the bitfields are programmed as long
+ as the corresponding CFG_SCCR option is defined in the board header file.
+ This means that the board header file should not define any CFG_SCCR macros
+ for bitfields that don't exist on that processor, otherwise the SCCR will be
+ programmed incorrectly.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9546266999f0b9b51372636614211b88d90f0f25
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Fri Jun 22 13:04:22 2007 +0200
+
+ TQM834x: cleanup configuraton
+
+ Remove irritating #undef DEBUG
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
+Author: david.saada <David.Saada@ecitele.com>
+Date: Mon Jun 18 09:09:53 2007 -0700
+
+ MPC83xx: Fix makefile to generate config.h file in the build directory
+
+ MPC83xx: Fix the Makefile config sections to generate the include/config.h
+ file in the build directory instead of the source directory.
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
+Author: Lee Nipper <Lee.Nipper@freescale.com>
+Date: Thu Jun 14 20:07:33 2007 -0500
+
+ mpc83xx: Add support for 8360 silicon revision 2.1
+
+ This change adds 8360 silicon revision 2.1 support to u-boot.
+
+ Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 8 04:14:28 2007 -0500
+
+ Treat ppc64 host as ppc
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0dc4279b08ff82472bec2e2c90858602459febe8
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 8 09:01:46 2007 +0800
+
+ Minor fix for bios emulator makefile
+
+ Add $(obj) to LIB avoiding objects be built in the source dir
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 8 08:33:11 2007 +0800
+
+ Add CONFIG_BIOSEMU define to guard all the bios emulator code
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+ This patch fix the compile issue on the board that did not enable the bios emulator
+
+commit ed8106433522f2ea8933e9808346860d061d7731
+Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
+Date: Tue Jul 31 12:27:25 2007 -0500
+
+ tsec: fix multiple PHY support
+
+ The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
+ broke multiple PHY support in tsec.c. This fixes it.
+
+ Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 09:08:18 2007 -0500
+
+ tsec: Allow Ten Bit Interface address to be configurable
+
+ Allow the address of the Ten Bit Interface (TBI) to be changed in the
+ event of a conflict with another device.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue Aug 7 16:17:06 2007 +0800
+
+ Add CONFIG_BIOSEMU define to guard all the bios emulator code
+
+ This patch fix the compile issue on the board that did not enable the bios emulator
+
+commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 7 16:02:13 2007 +0200
+
+ Fix missing brace error in fs/fat/fat.c
+ [pointed out by Roderik Wildenburg]
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 23:21:05 2007 +0200
+
+ Fixed typo in README (pointed out by Martin Jost).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 02:17:36 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 221838cc7eb178370ff62aa05920a582e12ac322
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue Jul 10 09:03:22 2007 +0800
+
+ Remove the bios emulator from MAI board.
+
+ The bios emulator in the MAI board can not pass compile
+ and have a lot of crap in it. remove it and will have a
+ clean and small bios emulator in the drivers directory
+ which can be uesed for every board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5618332409bb96f4448d1712899369fc80c0b489
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 13 12:14:59 2007 +0800
+
+ Fix some compile issues for MAI board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 0f460a1ee148b648ee242c3157650287d4296260
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 13 12:14:58 2007 +0800
+
+ Configurations for ATI video card BIOS emulator
+
+ This patch add definition of the BIOS emulator and the ATI framebuffer
+ driver for MPC8641HPCN board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit ece92f85053b8df613edcf05b26a416cbc3d629c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 6 08:34:56 2007 +0800
+
+ This is a BIOS emulator, porting from SciTech for u-boot, mainly for
+ ATI video card BIOS. and can be used for x86 code emulation by some
+ modifications.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5072188acabde3178fac7f5a597150e6e74fd40c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 6 08:33:33 2007 +0800
+
+ This is a framebuffer driver for ATI video card, can work for PCI9200,
+ X300, X700, X800 ATI video cards.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
commit 5728be389e65fd47f34b33c2596271eb4db751ae
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Aug 6 01:01:49 2007 +0200
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit 86b116b1b1e165ca4840daefed36d2e3b8460173
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Aug 3 12:08:16 2007 +0200
+
+ cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
+
+ Add the ability for modules from the Schindler cm5200 family to use a
+ single U-Boot image:
+ - rename cm1_qp1 to cm5200
+ - add run-time module detection
+ - parametrize SDRAM configuration according to the module we are running on
+
+ Few minor, board-specific fixes included in this patch:
+ - better MAC address handling
+ - updated default environment ('update' command uses +{filesize} now)
+ - improved error messages in the auto-update code
+ - allow booting U-Boot from RAM (CFG_RAMBOOT)
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
Author: Andy Fleming <afleming@freescale.com>
Date: Fri Aug 3 04:05:25 2007 -0500
Signed-off-by: Detlev Zundel <dzu@denx.de>
+commit 9b7464a2c88614e1061f509c48930a3d240d1a35
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Jun 11 15:14:24 2007 +0200
+
+ USB: This patch fix readl in ohci swap reg access.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Fri Jun 8 14:52:22 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:44 2007 +0200
+
+ TRAB, USB: update trab board configuration for use of generic ohci driver
+
+commit dace45acd1c1357daa9322099d07c9a9e08b0024
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:43 2007 +0200
+
+ USB: ohci fixes and cleanup for ppc4xx and yosemite board.
+
+commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:43 2007 +0200
+
+ USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
+
+commit fc43be478f2aa37ce38acd85355038866e4162af
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:35 2007 +0200
+
+ USB/OHCI: endianness cleanup in the generic ohci driver
+
commit c440bfe6d6d92d66478a7e84402b31f48413617b
Author: Stefan Roese <sr@denx.de>
Date: Wed Jun 6 11:42:13 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
+Author: Rodolfo Giometti <giometti@linux.it>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ Files include/linux/byteorder/{big,little}_endian.h define
+ __BIG_ENDIAN and __LITTLE_ENDIAN.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ Add USB PCI-OHCI, USB keyboard and event poll support to the
+ MPC8641HPCN board config file.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ USB PCI-OHCI, interrupt pipe and usb event poll support
+
+ This patch added USB PCI-OHCI chips support, interrupt pipe support
+ and usb event poll support. For supporting the USB interrupt pipe, the
+ globe urb_priv is moved to purb in ed struct. Now, we can process
+ several urbs at one time. The interrupt pipe support codes are ported
+ from Linux kernel 2.4.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit fdcfaa1b02268b2899e374b35adf936c911a47eb
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:13 2007 +0200
+
+ USB event poll support
+
+ This patch adds USB event poll support, which could be used in usbkbd
+ and other usb devices driver when the asynchronous interrupt
+ processing is supported.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com
+
+commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
+Author: Rodolfo Giometti <giometti@linux.it>
+Date: Wed Jun 6 10:08:12 2007 +0200
+
+ ISP116x: delay for crappy USB keys
+
+ Using some (very) slow USB keys cause the USB host controller buffers
+ are not ready to be read by the CPU so we need an extra delay before
+ reading the USB storage data.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit 09444143670c9c2243cb7aba9f70b3713d33bed1
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 10:08:12 2007 +0200
+
+ Change duplicate usb_cpu_init_fail to usb_board_init_fail
+
+ Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
+ this out.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date: Tue Jun 5 12:30:52 2007 -0500
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 5b1313fb2758ffce8b624457f777d8cc6709608d
+Author: Nikita V. Youshchenko <yoush@debian.org>
+Date: Wed May 23 12:45:19 2007 +0400
+
+ fix compilation problem for mpc8349itx CFG_RAMBOOT
+
+ Current include/configs/MPC8349ITX.h does contain some support for building
+ image that will be started from memory (without putting in into flash).
+ It could be triggered by building with TEXT_BASE set to a low value.
+
+ However, this support is incomplete: using of low TEXT_BASE causes
+ defining configuration macros in inconsistent way, which later leads
+ to compilation errors. In particular. flash support is being disabled,
+ but then flash structures get referenced.
+
+ This patch fixes this, making it possible to build with low TEXT_BASE.
+
+ Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8a364f0970de49949d635e60accf463c6443ef8c
+Author: Nikita V. Youshchenko <yoush@debian.org>
+Date: Wed May 23 12:45:25 2007 +0400
+
+ add missing 'console' var to default mpc8349itx config
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
Author: Stefan Roese <sr@denx.de>
Date: Fri Jun 1 16:18:17 2007 +0200
new: add writing to msr register
+commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon May 7 16:43:56 2007 +0200
+
+ Fix an ancient CHANGELOG conflict
+
commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
Author: Timur Tabi <timur@freescale.com>
Date: Sat May 5 08:12:30 2007 +0200
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Apr 23 13:10:52 2007 +0200
+
+ USB: (Another) delay for crappy USB keys.
+
+ Some USB keys are slow in giving back an answer when the Root HUB
+ enables power lines.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
Author: Stefan Roese <sr@denx.de>
Date: Mon Apr 23 12:00:22 2007 +0200
Minor cleanup.
+commit 822af351ad2babc7d99033361a5fcacd30f6bc78
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Tue Apr 3 14:27:18 2007 +0200
+
+ Support for the Philips ISP116x HCD (Host Controller Driver)
+
+ Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
+
+commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Apr 3 14:27:08 2007 +0200
+
+ USB: cleanup monahans usb support. Remove dead code.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit a65c5768e5537530bd1780af3d3fddc3113a163c
Author: Stefan Roese <sr@denx.de>
Date: Mon Apr 2 10:09:30 2007 +0200
PATCH: Resolve GPL license problem
+commit ae00bb4b2944dc64a485ed72a19754b11af7c223
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Mar 26 12:03:36 2007 +0200
+
+ PXA: pxa27x USB OHCI support
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Mar 26 11:21:05 2007 +0200
+
+ USB: remove the S3C24X0_merge #define, which was introduced while
+ merging OHCI drivers.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit 1798049522f594013aea29457d46794298c6ae15
Author: Michal Simek <root@monstr.eu>
Date: Mon Mar 26 01:39:07 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 58b485776698c3d71ec5a215e392123b4c15afa3
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:51:21 2006 +0100
+
+ Add a small README with information on the generic ohci driver.
+
+commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:46:46 2006 +0100
+
+ Fix some endianness issues related to the generic ohci driver
+
+commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:44:58 2006 +0100
+
+ Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
+ to choose between the old and the generic OHCI drivers.
+
+commit 53e336e9ffc51035bdc4e5867631b3378761b4df
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:43:09 2006 +0100
+
+ Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
+ and adapted board configs TQM5200 and yosemite accordingly. This commit
+ also makes the maximum number of root hub ports configurable
+ (CFG_USB_OHCI_MAX_ROOT_PORTS).
+
commit 78d620ebb5871d252270dedfad60c6568993b780
Author: Wolfgang Denk <wd@atlas.denx.de>
Date: Thu Nov 23 22:58:58 2006 +0100
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+commit 99d70e3a47affb9bae041a2caece7cd516e213b3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Jun 26 11:06:00 2006 +0200
+
+ More code cleanup
+
commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
Author: Jon Loeliger <jdl@freescale.com>
Date: Thu Jun 22 08:51:46 2006 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit 386eda022473394ad8f36b86f2bdc9b4cb816291
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jun 14 18:14:56 2006 +0200
+
+ Code cleanup
+
+commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jun 14 17:45:53 2006 +0200
+
+ Various USB related patches
+ - Add support for mpc8xx USB device.
+ - Add support for Common Device Class - Abstract Control Model USB console.
+ - Add support for flow control in USB slave devices.
+ - Add support for switching between gserial and cdc_acm using environment.
+ - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
+ - Update usbcore slightly to ease host enumeration.
+ - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
+ - Add AdderUSB_config as a defconfig to enable usage of the USB console
+ by default with the Adder87x U-Boot port.
+ Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
+
commit 8ecc971618f56029ad99d3516f8b297a6ed58971
Author: Jon Loeliger <jdl@jdl.com>
Date: Wed Jun 7 10:53:55 2006 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 30 16:56:14 2006 +0200
+
+ Support generic OHCI support for the s3c24x0 cpu.
+
commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date: Tue May 30 09:10:32 2006 -0500
Signed-off-by: Jon Loeliger <jdl@jdl.com>
+commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 23 13:38:35 2006 +0200
+
+ Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
+ fixes to the latter.
+
+commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 23 10:33:11 2006 +0200
+
+ More cleanup for the delta board and the generic usb_ohci driver. Added
+ CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
+ initialization and cleanup hooks respectively.
+
+commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon May 22 16:33:54 2006 +0200
+
+ This patch adds USB storage support for the delta board. This is the first
+ board to make use of a generic OHCI driver, that calls hooks for board
+ dependant initialization.
+
commit 14e37081ff3cac7ebe6e93836523429853b6b292
Author: Jon Loeliger <jdl@jdl.com>
Date: Fri May 19 13:28:39 2006 -0500
projects / u-boot / commitdiff