]> git.sur5r.net Git - u-boot/commitdiff
usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
authorBin Meng <bmeng.cn@gmail.com>
Wed, 19 Jul 2017 13:50:05 +0000 (21:50 +0800)
committerMarek Vasut <marex@denx.de>
Fri, 28 Jul 2017 21:34:23 +0000 (23:34 +0200)
EHC reports supported maximum number of ports in the HCSPARAMS
register, so it's unnecessary to use a hardcoded config option
CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci.h

index 40ac3a602ce5bad6fa1a97ef13a7c2019c536dc5..3243c1d1cf250a9de353b8c05d46acd12b1efa6d 100644 (file)
@@ -148,9 +148,12 @@ static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
 
 static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
 {
-       if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+       int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
+
+       if (port < 0 || port >= max_ports) {
                /* Printing the message would cause a scan failure! */
-               debug("The request port(%u) is not configured\n", port);
+               debug("The request port(%u) exceeds maximum port number\n",
+                     port);
                return NULL;
        }
 
@@ -205,6 +208,7 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl)
 {
        int i, ret = 0;
        uint32_t cmd, reg;
+       int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
 
        if (!ctrl || !ctrl->hcor)
                return -EINVAL;
@@ -219,7 +223,7 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl)
                100 * 1000);
 
        if (!ret) {
-               for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) {
+               for (i = 0; i < max_ports; i++) {
                        reg = ehci_readl(&ctrl->hcor->or_portsc[i]);
                        reg |= EHCI_PS_SUSP;
                        ehci_writel(&ctrl->hcor->or_portsc[i], reg);
index 2ab830df5155a51c33828fe2a28e83eebba04ebc..7c39becd247e03caab60ba0a787f6024a4f28434 100644 (file)
@@ -11,9 +11,8 @@
 
 #include <usb.h>
 
-#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-#endif
+/* Section 2.2.3 - N_PORTS */
+#define MAX_HC_PORTS           15
 
 /*
  * Register Space.
@@ -62,7 +61,7 @@ struct ehci_hcor {
        uint32_t _reserved_1_[6];
        uint32_t or_configflag;
 #define FLAG_CF                (1 << 0)        /* true:  we'll support "high speed" */
-       uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
+       uint32_t or_portsc[MAX_HC_PORTS];
 #define PORTSC_PSPD(x)         (((x) >> 26) & 0x3)
 #define PORTSC_PSPD_FS                 0x0
 #define PORTSC_PSPD_LS                 0x1