xpedite1k: Sync up board config options with other X-ES boards

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 391d0419fa5012de8bc4b1bc73cd9afaddc9a6aa..016fa8a882461eda3686b16332929fdb9e1a2a15 100644 (file)
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -62,6 +62,7 @@
 /*
  * Diagnostics
  */
+#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x0400000
 #define CONFIG_SYS_MEMTEST_END         0x0C00000
 
@@ -104,18 +105,24 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_POST_WORD_ADDR
 
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)    /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN  (128 * 1024)    /* Reserve 128 kB for malloc */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)    /* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN  (1024 * 1024)   /* Reserved for malloc */
 
 /*
  * Serial Port
  */
 #define CONFIG_SYS_BAUDRATE_TABLE \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-#define CONFIG_BAUDRATE                        9600
+#define CONFIG_BAUDRATE                        115200
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+
 /*
  * NOR flash configuration
  */
@@ -126,8 +133,6 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_QUIET_TEST            /* MirrorBit flashes are optional */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
 #define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms) */
 
@@ -137,7 +142,7 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_HARD_I2C                        1       /* I2C with hardware support */
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7f
-#define CONFIG_SYS_I2C_NOPROBES        {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}
+#define CONFIG_I2C_MULTI_BUS
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
@@ -214,16 +219,19 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
 #define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 #define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
+#define CONFIG_CMDLINE_EDITING 1               /* Command-line editing */
+#define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG                      /* do not reset board on panic */
+#define CONFIG_PREBOOT                         /* enable preboot variable */
+#define CONFIG_FIT             1
+#define CONFIG_FIT_VERBOSE     1
+#define CONFIG_INTEGRITY                       /* support booting INTEGRITY OS */
+#define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
 /*
  * For booting Linux, the board info and command line data
@@ -238,14 +246,6 @@ extern void out32(unsigned int, unsigned long);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-/*
- * KGDB configuration
- */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */