sf: eeprom_m95xxx: fix up style

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/drivers/mtd/spi/eeprom_m95xxx.c b/drivers/mtd/spi/eeprom_m95xxx.c
index ef8ed6f4c5d814ad57742fdf4470e6cc53399892..bae9445f8ba7b1f8fef2bd1d1b5aab59bd7d00e4 100644 (file)
--- a/drivers/mtd/spi/eeprom_m95xxx.c
+++ b/drivers/mtd/spi/eeprom_m95xxx.c
@@ -37,33 +37,33 @@
 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
 #endif
 
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
 {
        struct spi_slave *slave;
        u8 cmd = SPI_EEPROM_READ;
 
        slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000,
                        CONFIG_DEFAULT_SPI_MODE);
-       if(!slave)
+       if (!slave)
                return 0;
 
        spi_claim_bus(slave);
 
        /* command */
-       if(spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN))
+       if (spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN))
                return -1;
 
        /*
-        * if alen == 3, addr[0] is the block number, we never use it here. All we
-        * need are the lower 16 bits
+        * if alen == 3, addr[0] is the block number, we never use it here.
+        * All we need are the lower 16 bits.
         */
        if (alen == 3)
                addr++;
 
        /* address, and data */
-       if(spi_xfer(slave, 16, addr, NULL, 0))
+       if (spi_xfer(slave, 16, addr, NULL, 0))
                return -1;
-       if(spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END))
+       if (spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END))
                return -1;
 
        spi_release_bus(slave);
@@ -71,7 +71,7 @@ ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
        return len;
 }
 
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 {
        struct spi_slave *slave;
        char buf[3];
@@ -85,7 +85,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
        spi_claim_bus(slave);
 
        buf[0] = SPI_EEPROM_WREN;
-       if(spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END))
+       if (spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END))
                return -1;
 
        buf[0] = SPI_EEPROM_WRITE;
@@ -98,9 +98,9 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
 
        memcpy(buf + 1, addr, alen);
        /* command + addr, then data */
-       if(spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN))
+       if (spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN))
                return -1;
-       if(spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END))
+       if (spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END))
                return -1;
 
        start = get_timer(0);
@@ -115,7 +115,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
        } while (get_timer(start) < CONFIG_SYS_SPI_WRITE_TOUT);
 
        if (buf[1] & 1)
-               printf ("*** spi_write: Time out while writing!\n");
+               printf("*** spi_write: Timeout while writing!\n");
 
        spi_release_bus(slave);
        spi_free_slave(slave);