--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef _MAILBOX_S10_H_
+#define _MAILBOX_S10_H_
+
+/* user define Uboot ID */
+#define MBOX_CLIENT_ID_UBOOT 0xB
+#define MBOX_ID_UBOOT 0x1
+
+#define MBOX_CMD_DIRECT 0
+#define MBOX_CMD_INDIRECT 1
+
+#define MBOX_MAX_CMD_INDEX 2047
+#define MBOX_CMD_BUFFER_SIZE 32
+#define MBOX_RESP_BUFFER_SIZE 16
+
+#define MBOX_HDR_CMD_LSB 0
+#define MBOX_HDR_CMD_MSK (BIT(11) - 1)
+#define MBOX_HDR_I_LSB 11
+#define MBOX_HDR_I_MSK BIT(11)
+#define MBOX_HDR_LEN_LSB 12
+#define MBOX_HDR_LEN_MSK 0x007FF000
+#define MBOX_HDR_ID_LSB 24
+#define MBOX_HDR_ID_MSK 0x0F000000
+#define MBOX_HDR_CLIENT_LSB 28
+#define MBOX_HDR_CLIENT_MSK 0xF0000000
+
+/* Interrupt flags */
+#define MBOX_FLAGS_INT_COE BIT(0) /* COUT update interrupt enable */
+#define MBOX_FLAGS_INT_RIE BIT(1) /* RIN update interrupt enable */
+#define MBOX_FLAGS_INT_UAE BIT(8) /* Urgent ACK interrupt enable */
+#define MBOX_ALL_INTRS (MBOX_FLAGS_INT_COE | \
+ MBOX_FLAGS_INT_RIE | \
+ MBOX_FLAGS_INT_UAE)
+
+/* Status */
+#define MBOX_STATUS_UA_MSK BIT(8)
+
+#define MBOX_CMD_HEADER(client, id, len, indirect, cmd) \
+ ((((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \
+ (((indirect) << MBOX_HDR_I_LSB) & MBOX_HDR_I_MSK) | \
+ (((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK) | \
+ (((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK) | \
+ (((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK))
+
+#define MBOX_RESP_ERR_GET(resp) \
+ (((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
+#define MBOX_RESP_LEN_GET(resp) \
+ (((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
+#define MBOX_RESP_ID_GET(resp) \
+ (((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
+#define MBOX_RESP_CLIENT_GET(resp) \
+ (((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)
+
+/* Response error list */
+enum ALT_SDM_MBOX_RESP_CODE {
+ /* CMD completed successfully, but check resp ARGS for any errors */
+ MBOX_RESP_STATOK = 0,
+ /* CMD is incorrectly formatted in some way */
+ MBOX_RESP_INVALID_COMMAND = 1,
+ /* BootROM Command code not undesrtood */
+ MBOX_RESP_UNKNOWN_BR = 2,
+ /* CMD code not recognized by firmware */
+ MBOX_RESP_UNKNOWN = 3,
+ /* Indicates that the device is not configured */
+ MBOX_RESP_NOT_CONFIGURED = 256,
+ /* Indicates that the device is busy */
+ MBOX_RESP_DEVICE_BUSY = 0x1FF,
+ /* Indicates that there is no valid response available */
+ MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
+ /* General Error */
+ MBOX_RESP_ERROR = 0x3FF,
+};
+
+/* Mailbox command list */
+#define MBOX_RESTART 2
+#define MBOX_CONFIG_STATUS 4
+#define MBOX_RECONFIG 6
+#define MBOX_RECONFIG_MSEL 7
+#define MBOX_RECONFIG_DATA 8
+#define MBOX_RECONFIG_STATUS 9
+#define MBOX_QSPI_OPEN 50
+#define MBOX_QSPI_CLOSE 51
+#define MBOX_QSPI_DIRECT 59
+#define MBOX_REBOOT_HPS 71
+
+/* Mailbox registers */
+#define MBOX_CIN 0 /* command valid offset */
+#define MBOX_ROUT 4 /* response output offset */
+#define MBOX_URG 8 /* urgent command */
+#define MBOX_FLAGS 0x0c /* interrupt enables */
+#define MBOX_COUT 0x20 /* command free offset */
+#define MBOX_RIN 0x24 /* respond valid offset */
+#define MBOX_STATUS 0x2c /* mailbox status */
+#define MBOX_CMD_BUF 0x40 /* circular command buffer */
+#define MBOX_RESP_BUF 0xc0 /* circular response buffer */
+#define MBOX_DOORBELL_TO_SDM 0x400 /* Doorbell to SDM */
+#define MBOX_DOORBELL_FROM_SDM 0x480 /* Doorbell from SDM */
+
+/* Status and bit information returned by RECONFIG_STATUS */
+#define RECONFIG_STATUS_RESPONSE_LEN 6
+#define RECONFIG_STATUS_STATE 0
+#define RECONFIG_STATUS_PIN_STATUS 2
+#define RECONFIG_STATUS_SOFTFUNC_STATUS 3
+
+#define MBOX_CFGSTAT_STATE_IDLE 0x00000000
+#define MBOX_CFGSTAT_STATE_CONFIG 0x10000000
+#define MBOX_CFGSTAT_STATE_FAILACK 0x08000000
+#define MBOX_CFGSTAT_STATE_ERROR_INVALID 0xf0000001
+#define MBOX_CFGSTAT_STATE_ERROR_CORRUPT 0xf0000002
+#define MBOX_CFGSTAT_STATE_ERROR_AUTH 0xf0000003
+#define MBOX_CFGSTAT_STATE_ERROR_CORE_IO 0xf0000004
+#define MBOX_CFGSTAT_STATE_ERROR_HARDWARE 0xf0000005
+#define MBOX_CFGSTAT_STATE_ERROR_FAKE 0xf0000006
+#define MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO 0xf0000007
+#define MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR 0xf0000008
+
+#define RCF_SOFTFUNC_STATUS_CONF_DONE BIT(0)
+#define RCF_SOFTFUNC_STATUS_INIT_DONE BIT(1)
+#define RCF_SOFTFUNC_STATUS_SEU_ERROR BIT(3)
+#define RCF_PIN_STATUS_NSTATUS BIT(31)
+
+int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
+ u32 *resp_buf_len, u32 *resp_buf);
+int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
+ u8 urgent, u32 *resp_buf_len, u32 *resp_buf);
+int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
+int mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
+int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len);
+int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len);
+int mbox_init(void);
+
+#ifdef CONFIG_CADENCE_QSPI
+int mbox_qspi_close(void);
+int mbox_qspi_open(void);
+#endif
+
+int mbox_reset_cold(void);
+
+#endif /* _MAILBOX_S10_H_ */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <wait_bit.h>
+#include <asm/io.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/secure.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MBOX_READL(reg) \
+ readl(SOCFPGA_MAILBOX_ADDRESS + (reg))
+
+#define MBOX_WRITEL(data, reg) \
+ writel(data, SOCFPGA_MAILBOX_ADDRESS + (reg))
+
+#define MBOX_READ_RESP_BUF(rout) \
+ MBOX_READL(MBOX_RESP_BUF + ((rout) * sizeof(u32)))
+
+#define MBOX_WRITE_CMD_BUF(data, cin) \
+ MBOX_WRITEL(data, MBOX_CMD_BUF + ((cin) * sizeof(u32)))
+
+static __always_inline int mbox_polling_resp(u32 rout)
+{
+ u32 rin;
+ unsigned long i = ~0;
+
+ while (i) {
+ rin = MBOX_READL(MBOX_RIN);
+ if (rout != rin)
+ return 0;
+
+ i--;
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Check for available slot and write to circular buffer.
+ * It also update command valid offset (cin) register.
+ */
+static __always_inline int mbox_fill_cmd_circular_buff(u32 header, u32 len,
+ u32 *arg)
+{
+ u32 cin;
+ u32 cout;
+ u32 i;
+
+ cin = MBOX_READL(MBOX_CIN) % MBOX_CMD_BUFFER_SIZE;
+ cout = MBOX_READL(MBOX_COUT) % MBOX_CMD_BUFFER_SIZE;
+
+ /* if command buffer is full or not enough free space
+ * to fit the data
+ */
+ if (((cin + 1) % MBOX_CMD_BUFFER_SIZE) == cout ||
+ ((MBOX_CMD_BUFFER_SIZE - cin + cout - 1) %
+ MBOX_CMD_BUFFER_SIZE) < len)
+ return -ENOMEM;
+
+ /* write header to circular buffer */
+ MBOX_WRITE_CMD_BUF(header, cin++);
+ /* wrapping around when it reach the buffer size */
+ cin %= MBOX_CMD_BUFFER_SIZE;
+
+ /* write arguments */
+ for (i = 0; i < len; i++) {
+ MBOX_WRITE_CMD_BUF(arg[i], cin++);
+ /* wrapping around when it reach the buffer size */
+ cin %= MBOX_CMD_BUFFER_SIZE;
+ }
+
+ /* write command valid offset */
+ MBOX_WRITEL(cin, MBOX_CIN);
+
+ return 0;
+}
+
+/* Check the command and fill it into circular buffer */
+static __always_inline int mbox_prepare_cmd_only(u8 id, u32 cmd,
+ u8 is_indirect, u32 len,
+ u32 *arg)
+{
+ u32 header;
+ int ret;
+
+ /* Total length is command + argument length */
+ if ((len + 1) > MBOX_CMD_BUFFER_SIZE)
+ return -EINVAL;
+
+ if (cmd > MBOX_MAX_CMD_INDEX)
+ return -EINVAL;
+
+ header = MBOX_CMD_HEADER(MBOX_CLIENT_ID_UBOOT, id, len,
+ (is_indirect) ? 1 : 0, cmd);
+
+ ret = mbox_fill_cmd_circular_buff(header, len, arg);
+
+ return ret;
+}
+
+/* Send command only without waiting for responses from SDM */
+static __always_inline int mbox_send_cmd_only_common(u8 id, u32 cmd,
+ u8 is_indirect, u32 len,
+ u32 *arg)
+{
+ int ret = mbox_prepare_cmd_only(id, cmd, is_indirect, len, arg);
+ /* write doorbell */
+ MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM);
+
+ return ret;
+}
+
+/* Return number of responses received in buffer */
+static __always_inline int __mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len)
+{
+ u32 rin;
+ u32 rout;
+ u32 resp_len = 0;
+
+ /* clear doorbell from SDM if it was SET */
+ if (MBOX_READL(MBOX_DOORBELL_FROM_SDM) & 1)
+ MBOX_WRITEL(0, MBOX_DOORBELL_FROM_SDM);
+
+ /* read current response offset */
+ rout = MBOX_READL(MBOX_ROUT);
+ /* read response valid offset */
+ rin = MBOX_READL(MBOX_RIN);
+
+ while (rin != rout && (resp_len < resp_buf_max_len)) {
+ /* Response received */
+ if (resp_buf)
+ resp_buf[resp_len++] = MBOX_READ_RESP_BUF(rout);
+
+ rout++;
+ /* wrapping around when it reach the buffer size */
+ rout %= MBOX_RESP_BUFFER_SIZE;
+ /* update next ROUT */
+ MBOX_WRITEL(rout, MBOX_ROUT);
+ }
+
+ return resp_len;
+}
+
+/* Support one command and up to 31 words argument length only */
+static __always_inline int mbox_send_cmd_common(u8 id, u32 cmd, u8 is_indirect,
+ u32 len, u32 *arg, u8 urgent,
+ u32 *resp_buf_len,
+ u32 *resp_buf)
+{
+ u32 rin;
+ u32 resp;
+ u32 rout;
+ u32 status;
+ u32 resp_len;
+ u32 buf_len;
+ int ret;
+
+ ret = mbox_prepare_cmd_only(id, cmd, is_indirect, len, arg);
+ if (ret)
+ return ret;
+
+ if (urgent) {
+ /* Read status because it is toggled */
+ status = MBOX_READL(MBOX_STATUS) & MBOX_STATUS_UA_MSK;
+ /* Send command as urgent command */
+ MBOX_WRITEL(1, MBOX_URG);
+ }
+
+ /* write doorbell */
+ MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM);
+
+ while (1) {
+ ret = ~0;
+
+ /* Wait for doorbell from SDM */
+ while (!MBOX_READL(MBOX_DOORBELL_FROM_SDM) && ret--)
+ ;
+ if (!ret)
+ return -ETIMEDOUT;
+
+ /* clear interrupt */
+ MBOX_WRITEL(0, MBOX_DOORBELL_FROM_SDM);
+
+ if (urgent) {
+ u32 new_status = MBOX_READL(MBOX_STATUS);
+ /* urgent command doesn't have response */
+ MBOX_WRITEL(0, MBOX_URG);
+ /* Urgent ACK is toggled */
+ if ((new_status & MBOX_STATUS_UA_MSK) ^ status)
+ return 0;
+
+ return -ECOMM;
+ }
+
+ /* read current response offset */
+ rout = MBOX_READL(MBOX_ROUT);
+
+ /* read response valid offset */
+ rin = MBOX_READL(MBOX_RIN);
+
+ if (rout != rin) {
+ /* Response received */
+ resp = MBOX_READ_RESP_BUF(rout);
+ rout++;
+ /* wrapping around when it reach the buffer size */
+ rout %= MBOX_RESP_BUFFER_SIZE;
+ /* update next ROUT */
+ MBOX_WRITEL(rout, MBOX_ROUT);
+
+ /* check client ID and ID */
+ if ((MBOX_RESP_CLIENT_GET(resp) ==
+ MBOX_CLIENT_ID_UBOOT) &&
+ (MBOX_RESP_ID_GET(resp) == id)) {
+ ret = MBOX_RESP_ERR_GET(resp);
+ if (ret)
+ return ret;
+
+ if (resp_buf_len) {
+ buf_len = *resp_buf_len;
+ *resp_buf_len = 0;
+ } else {
+ buf_len = 0;
+ }
+
+ resp_len = MBOX_RESP_LEN_GET(resp);
+ while (resp_len) {
+ ret = mbox_polling_resp(rout);
+ if (ret)
+ return ret;
+ /* we need to process response buffer
+ * even caller doesn't need it
+ */
+ resp = MBOX_READ_RESP_BUF(rout);
+ rout++;
+ resp_len--;
+ rout %= MBOX_RESP_BUFFER_SIZE;
+ MBOX_WRITEL(rout, MBOX_ROUT);
+ if (buf_len) {
+ /* copy response to buffer */
+ resp_buf[*resp_buf_len] = resp;
+ (*resp_buf_len)++;
+ buf_len--;
+ }
+ }
+ return ret;
+ }
+ }
+ };
+
+ return -EIO;
+}
+
+int mbox_init(void)
+{
+ int ret;
+
+ /* enable mailbox interrupts */
+ MBOX_WRITEL(MBOX_ALL_INTRS, MBOX_FLAGS);
+
+ /* Ensure urgent request is cleared */
+ MBOX_WRITEL(0, MBOX_URG);
+
+ /* Ensure the Doorbell Interrupt is cleared */
+ MBOX_WRITEL(0, MBOX_DOORBELL_FROM_SDM);
+
+ ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RESTART, MBOX_CMD_DIRECT, 0,
+ NULL, 1, 0, NULL);
+ if (ret)
+ return ret;
+
+ /* Renable mailbox interrupts after MBOX_RESTART */
+ MBOX_WRITEL(MBOX_ALL_INTRS, MBOX_FLAGS);
+
+ return 0;
+}
+
+#ifdef CONFIG_CADENCE_QSPI
+int mbox_qspi_close(void)
+{
+ return mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_CLOSE, MBOX_CMD_DIRECT,
+ 0, NULL, 0, 0, NULL);
+}
+
+int mbox_qspi_open(void)
+{
+ static const struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+ int ret;
+ u32 resp_buf[1];
+ u32 resp_buf_len;
+
+ ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN, MBOX_CMD_DIRECT,
+ 0, NULL, 0, 0, NULL);
+ if (ret) {
+ /* retry again by closing and reopen the QSPI again */
+ ret = mbox_qspi_close();
+ if (ret)
+ return ret;
+
+ ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN,
+ MBOX_CMD_DIRECT, 0, NULL, 0, 0, NULL);
+ if (ret)
+ return ret;
+ }
+
+ /* HPS will directly control the QSPI controller, no longer mailbox */
+ resp_buf_len = 1;
+ ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_DIRECT, MBOX_CMD_DIRECT,
+ 0, NULL, 0, (u32 *)&resp_buf_len,
+ (u32 *)&resp_buf);
+ if (ret)
+ goto error;
+
+ /* We are getting QSPI ref clock and set into sysmgr boot register */
+ printf("QSPI: Reference clock at %d Hz\n", resp_buf[0]);
+ writel(resp_buf[0], &sysmgr_regs->boot_scratch_cold0);
+
+ return 0;
+
+error:
+ mbox_qspi_close();
+
+ return ret;
+}
+#endif /* CONFIG_CADENCE_QSPI */
+
+int mbox_reset_cold(void)
+{
+ int ret;
+
+ ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_REBOOT_HPS, MBOX_CMD_DIRECT,
+ 0, NULL, 0, 0, NULL);
+ if (ret) {
+ /* mailbox sent failure, wait for watchdog to kick in */
+ hang();
+ }
+ return 0;
+}
+
+int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
+ u8 urgent, u32 *resp_buf_len, u32 *resp_buf)
+{
+ return mbox_send_cmd_common(id, cmd, is_indirect, len, arg, urgent,
+ resp_buf_len, resp_buf);
+}
+
+int __secure mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len,
+ u32 *arg, u8 urgent, u32 *resp_buf_len,
+ u32 *resp_buf)
+{
+ return mbox_send_cmd_common(id, cmd, is_indirect, len, arg, urgent,
+ resp_buf_len, resp_buf);
+}
+
+int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg)
+{
+ return mbox_send_cmd_only_common(id, cmd, is_indirect, len, arg);
+}
+
+int __secure mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len,
+ u32 *arg)
+{
+ return mbox_send_cmd_only_common(id, cmd, is_indirect, len, arg);
+}
+
+int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len)
+{
+ return __mbox_rcv_resp(resp_buf, resp_buf_max_len);
+}
+
+int __secure mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len)
+{
+ return __mbox_rcv_resp(resp_buf, resp_buf_max_len);
+}
projects / u-boot / commitdiff