tsec: use IO accessors for IO accesses

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>

diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 9a91b9e0b85130deb0d608f05841eac08929debd..a2705e1cab77a3608155be696eb12c6cab72ddc5 100644 (file)
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -5,7 +5,7 @@
  * terms of the GNU Public License, Version 2, incorporated
  * herein by reference.
  *
- * Copyright 2004-2010 Freescale Semiconductor, Inc.
+ * Copyright 2004-2011 Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * author Andy Fleming
  *
@@ -50,7 +50,7 @@ static int tsec_recv(struct eth_device *dev);
 static int tsec_init(struct eth_device *dev, bd_t * bd);
 static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
 static void tsec_halt(struct eth_device *dev);
-static void init_registers(volatile tsec_t * regs);
+static void init_registers(tsec_t *regs);
 static void startup_tsec(struct eth_device *dev);
 static int init_phy(struct eth_device *dev);
 void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
@@ -166,9 +166,9 @@ static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
        eth_register(dev);
 
        /* Reset the MAC */
-       priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
+       setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
        udelay(2);  /* Soft Reset must be asserted for 3 TX clocks */
-       priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
+       clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
        && !defined(BITBANGMII)
@@ -190,16 +190,16 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
        char tmpbuf[MAC_ADDR_LEN];
        int i;
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
 
        /* Make sure the controller is stopped */
        tsec_halt(dev);
 
        /* Init MACCFG2.  Defaults to GMII */
-       regs->maccfg2 = MACCFG2_INIT_SETTINGS;
+       out_be32(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
 
        /* Init ECNTRL */
-       regs->ecntrl = ECNTRL_INIT_SETTINGS;
+       out_be32(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
        /* Copy the station address into the address registers.
         * Backwards, because little endian MACS are dumb */
@@ -209,11 +209,11 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
        tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
                  tmpbuf[3];
 
-       regs->macstnaddr1 = tempval;
+       out_be32(&regs->macstnaddr1, tempval);
 
        tempval = *((uint *) (tmpbuf + 4));
 
-       regs->macstnaddr2 = tempval;
+       out_be32(&regs->macstnaddr2, tempval);
 
        /* reset the indices to zero */
        rxIdx = 0;
@@ -230,17 +230,17 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
 }
 
 /* Writes the given phy's reg with value, using the specified MDIO regs */
-static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
+static void tsec_local_mdio_write(tsec_mdio_t *phyregs, uint addr,
                uint reg, uint value)
 {
        int timeout = 1000000;
 
-       phyregs->miimadd = (addr << 8) | reg;
-       phyregs->miimcon = value;
-       asm("sync");
+       out_be32(&phyregs->miimadd, (addr << 8) | reg);
+       out_be32(&phyregs->miimcon, value);
 
        timeout = 1000000;
-       while ((phyregs->miimind & MIIMIND_BUSY) && timeout--) ;
+       while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
+               ;
 }
 
 
@@ -254,28 +254,26 @@ static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
  * notvalid bit cleared), and the bus to cease activity (miimind
  * busy bit cleared), and then returns the value
  */
-static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs,
-                               uint phyid, uint regnum)
+static uint tsec_local_mdio_read(tsec_mdio_t *phyregs, uint phyid, uint regnum)
 {
        uint value;
 
        /* Put the address of the phy, and the register
         * number into MIIMADD */
-       phyregs->miimadd = (phyid << 8) | regnum;
+       out_be32(&phyregs->miimadd, (phyid << 8) | regnum);
 
        /* Clear the command register, and wait */
-       phyregs->miimcom = 0;
-       asm("sync");
+       out_be32(&phyregs->miimcom, 0);
 
        /* Initiate a read command, and wait */
-       phyregs->miimcom = MIIM_READ_COMMAND;
-       asm("sync");
+       out_be32(&phyregs->miimcom, MIIM_READ_COMMAND);
 
        /* Wait for the the indication that the read is done */
-       while ((phyregs->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
+       while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)))
+               ;
 
        /* Grab the value read from the PHY */
-       value = phyregs->miimstat;
+       value = in_be32(&phyregs->miimstat);
 
        return value;
 }
@@ -321,18 +319,16 @@ static int init_phy(struct eth_device *dev)
 {
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
        struct phy_info *curphy;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
 
        /* Assign a Physical address to the TBI */
-       regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
-       asm("sync");
+       out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
 
        /* Reset MII (due to new addresses) */
-       priv->phyregs->miimcfg = MIIMCFG_RESET;
-       asm("sync");
-       priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
-       asm("sync");
-       while (priv->phyregs->miimind & MIIMIND_BUSY) ;
+       out_be32(&priv->phyregs->miimcfg, MIIMCFG_RESET);
+       out_be32(&priv->phyregs->miimcfg, MIIMCFG_INIT_VALUE);
+       while (in_be32(&priv->phyregs->miimind) & MIIMIND_BUSY)
+               ;
 
        /* Get the cmd structure corresponding to the attached
         * PHY */
@@ -345,7 +341,7 @@ static int init_phy(struct eth_device *dev)
                return 0;
        }
 
-       if (regs->ecntrl & ECNTRL_SGMII_MODE)
+       if (in_be32(&regs->ecntrl) & ECNTRL_SGMII_MODE)
                tsec_configure_serdes(priv);
 
        priv->phyinfo = curphy;
@@ -838,16 +834,16 @@ static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
 static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
 {
        uint phyid;
-       volatile tsec_mdio_t *regbase = priv->phyregs;
+       tsec_mdio_t *regbase = priv->phyregs;
        int timeout = 1000000;
 
        for (phyid = 0; phyid < 4; phyid++) {
-               regbase->miimadd = (phyid << 8) | mii_reg;
-               regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
-               asm("sync");
+               out_be32(&regbase->miimadd, (phyid << 8) | mii_reg);
+               out_be32(&regbase->miimcon, MIIM_CIS8204_SLEDCON_INIT);
 
                timeout = 1000000;
-               while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
+               while ((in_be32(&regbase->miimind) & MIIMIND_BUSY) && timeout--)
+                       ;
        }
 
        return MIIM_CIS8204_SLEDCON_INIT;
@@ -874,45 +870,45 @@ static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
  * those we don't care about (unless zero is bad, in which case,
  * choose a more appropriate value)
  */
-static void init_registers(volatile tsec_t * regs)
+static void init_registers(tsec_t *regs)
 {
        /* Clear IEVENT */
-       regs->ievent = IEVENT_INIT_CLEAR;
-
-       regs->imask = IMASK_INIT_CLEAR;
-
-       regs->hash.iaddr0 = 0;
-       regs->hash.iaddr1 = 0;
-       regs->hash.iaddr2 = 0;
-       regs->hash.iaddr3 = 0;
-       regs->hash.iaddr4 = 0;
-       regs->hash.iaddr5 = 0;
-       regs->hash.iaddr6 = 0;
-       regs->hash.iaddr7 = 0;
-
-       regs->hash.gaddr0 = 0;
-       regs->hash.gaddr1 = 0;
-       regs->hash.gaddr2 = 0;
-       regs->hash.gaddr3 = 0;
-       regs->hash.gaddr4 = 0;
-       regs->hash.gaddr5 = 0;
-       regs->hash.gaddr6 = 0;
-       regs->hash.gaddr7 = 0;
-
-       regs->rctrl = 0x00000000;
+       out_be32(&regs->ievent, IEVENT_INIT_CLEAR);
+
+       out_be32(&regs->imask, IMASK_INIT_CLEAR);
+
+       out_be32(&regs->hash.iaddr0, 0);
+       out_be32(&regs->hash.iaddr1, 0);
+       out_be32(&regs->hash.iaddr2, 0);
+       out_be32(&regs->hash.iaddr3, 0);
+       out_be32(&regs->hash.iaddr4, 0);
+       out_be32(&regs->hash.iaddr5, 0);
+       out_be32(&regs->hash.iaddr6, 0);
+       out_be32(&regs->hash.iaddr7, 0);
+
+       out_be32(&regs->hash.gaddr0, 0);
+       out_be32(&regs->hash.gaddr1, 0);
+       out_be32(&regs->hash.gaddr2, 0);
+       out_be32(&regs->hash.gaddr3, 0);
+       out_be32(&regs->hash.gaddr4, 0);
+       out_be32(&regs->hash.gaddr5, 0);
+       out_be32(&regs->hash.gaddr6, 0);
+       out_be32(&regs->hash.gaddr7, 0);
+
+       out_be32(&regs->rctrl, 0x00000000);
 
        /* Init RMON mib registers */
        memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
 
-       regs->rmon.cam1 = 0xffffffff;
-       regs->rmon.cam2 = 0xffffffff;
+       out_be32(&regs->rmon.cam1, 0xffffffff);
+       out_be32(&regs->rmon.cam2, 0xffffffff);
 
-       regs->mrblr = MRBLR_INIT_SETTINGS;
+       out_be32(&regs->mrblr, MRBLR_INIT_SETTINGS);
 
-       regs->minflr = MINFLR_INIT_SETTINGS;
+       out_be32(&regs->minflr, MINFLR_INIT_SETTINGS);
 
-       regs->attr = ATTR_INIT_SETTINGS;
-       regs->attreli = ATTRELI_INIT_SETTINGS;
+       out_be32(&regs->attr, ATTR_INIT_SETTINGS);
+       out_be32(&regs->attreli, ATTRELI_INIT_SETTINGS);
 
 }
 
@@ -922,44 +918,49 @@ static void init_registers(volatile tsec_t * regs)
 static void adjust_link(struct eth_device *dev)
 {
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
+       u32 ecntrl, maccfg2;
 
-       if (priv->link) {
-               if (priv->duplexity != 0)
-                       regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
-               else
-                       regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
+       if (!priv->link) {
+               printf("%s: No link.\n", dev->name);
+               return;
+       }
 
-               switch (priv->speed) {
-               case 1000:
-                       regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
-                                        | MACCFG2_GMII);
-                       break;
-               case 100:
-               case 10:
-                       regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
-                                        | MACCFG2_MII);
+       /* clear all bits relative with interface mode */
+       ecntrl = in_be32(&regs->ecntrl);
+       ecntrl &= ~ECNTRL_R100;
 
-                       /* Set R100 bit in all modes although
-                        * it is only used in RGMII mode
-                        */
-                       if (priv->speed == 100)
-                               regs->ecntrl |= ECNTRL_R100;
-                       else
-                               regs->ecntrl &= ~(ECNTRL_R100);
-                       break;
-               default:
-                       printf("%s: Speed was bad\n", dev->name);
-                       break;
-               }
+       maccfg2 = in_be32(&regs->maccfg2);
+       maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
 
-               printf("Speed: %d, %s duplex%s\n", priv->speed,
-                      (priv->duplexity) ? "full" : "half",
-                      (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
+       if (priv->duplexity)
+               maccfg2 |= MACCFG2_FULL_DUPLEX;
 
-       } else {
-               printf("%s: No link.\n", dev->name);
+       switch (priv->speed) {
+       case 1000:
+               maccfg2 |= MACCFG2_GMII;
+               break;
+       case 100:
+       case 10:
+               maccfg2 |= MACCFG2_MII;
+
+               /* Set R100 bit in all modes although
+                * it is only used in RGMII mode
+                */
+               if (priv->speed == 100)
+                       ecntrl |= ECNTRL_R100;
+               break;
+       default:
+               printf("%s: Speed was bad\n", dev->name);
+               break;
        }
+
+       out_be32(&regs->ecntrl, ecntrl);
+       out_be32(&regs->maccfg2, maccfg2);
+
+       printf("Speed: %d, %s duplex%s\n", priv->speed,
+                       (priv->duplexity) ? "full" : "half",
+                       (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
 }
 
 /* Set up the buffers and their descriptors, and bring up the
@@ -969,11 +970,11 @@ static void startup_tsec(struct eth_device *dev)
 {
        int i;
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
 
        /* Point to the buffer descriptors */
-       regs->tbase = (unsigned int)(&rtx.txbd[txIdx]);
-       regs->rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
+       out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
+       out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
 
        /* Initialize the Rx Buffer descriptors */
        for (i = 0; i < PKTBUFSRX; i++) {
@@ -998,13 +999,13 @@ static void startup_tsec(struct eth_device *dev)
        adjust_link(dev);
 
        /* Enable Transmit and Receive */
-       regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
+       setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
 
        /* Tell the DMA it is clear to go */
-       regs->dmactrl |= DMACTRL_INIT_SETTINGS;
-       regs->tstat = TSTAT_CLEAR_THALT;
-       regs->rstat = RSTAT_CLEAR_RHALT;
-       regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
+       setbits_be32(&regs->dmactrl, DMACTRL_INIT_SETTINGS);
+       out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
+       out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
+       clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
 }
 
 /* This returns the status bits of the device. The return value
@@ -1017,7 +1018,7 @@ static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
        int i;
        int result = 0;
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
 
        /* Find an empty buffer descriptor */
        for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
@@ -1033,7 +1034,7 @@ static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
            (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
 
        /* Tell the DMA to go */
-       regs->tstat = TSTAT_CLEAR_THALT;
+       out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
 
        /* Wait for buffer to be transmitted */
        for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
@@ -1053,7 +1054,7 @@ static int tsec_recv(struct eth_device *dev)
 {
        int length;
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
 
        while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
 
@@ -1076,9 +1077,9 @@ static int tsec_recv(struct eth_device *dev)
                rxIdx = (rxIdx + 1) % PKTBUFSRX;
        }
 
-       if (regs->ievent & IEVENT_BSY) {
-               regs->ievent = IEVENT_BSY;
-               regs->rstat = RSTAT_CLEAR_RHALT;
+       if (in_be32(&regs->ievent) & IEVENT_BSY) {
+               out_be32(&regs->ievent, IEVENT_BSY);
+               out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
        }
 
        return -1;
@@ -1089,15 +1090,16 @@ static int tsec_recv(struct eth_device *dev)
 static void tsec_halt(struct eth_device *dev)
 {
        struct tsec_private *priv = (struct tsec_private *)dev->priv;
-       volatile tsec_t *regs = priv->regs;
+       tsec_t *regs = priv->regs;
 
-       regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
-       regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
+       clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+       setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
 
-       while ((regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))
-               != (IEVENT_GRSC | IEVENT_GTSC)) ;
+       while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
+                       != (IEVENT_GRSC | IEVENT_GTSC))
+               ;
 
-       regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
+       clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
 
        /* Shut down the PHY, as needed */
        if(priv->phyinfo)
@@ -1904,13 +1906,14 @@ static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
 {
        int i;
        uint result;
-       volatile tsec_mdio_t *phyregs = priv->phyregs;
+       tsec_mdio_t *phyregs = priv->phyregs;
 
-       phyregs->miimcfg = MIIMCFG_RESET;
+       out_be32(&phyregs->miimcfg, MIIMCFG_RESET);
 
-       phyregs->miimcfg = MIIMCFG_INIT_VALUE;
+       out_be32(&phyregs->miimcfg, MIIMCFG_INIT_VALUE);
 
-       while (phyregs->miimind & MIIMIND_BUSY) ;
+       while (in_be32(&phyregs->miimind) & MIIMIND_BUSY)
+               ;
 
        for (i = 0; cmd->mii_reg != miim_end; i++) {
                if (cmd->mii_data == miim_read) {

diff --git a/include/tsec.h b/include/tsec.h
index d56ec2cd0c5fce8caf79f9bd582924c6f7c00622..a066d97be94a72dd36bfcd45a830702845f66757 100644 (file)
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -7,7 +7,7 @@
  *  terms of the GNU Public License, Version 2, incorporated
  *  herein by reference.
  *
- * Copyright 2004, 2007, 2009  Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009, 2011  Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * maintained by Xianghua Xiao (x.xiao@motorola.com)
  * author Andy Fleming
@@ -587,9 +587,9 @@ typedef struct tsec
 #define TSEC_FIBER     (1 << 3)        /* PHY uses fiber, eg 1000 Base-X */
 
 struct tsec_private {
-       volatile tsec_t *regs;
-       volatile tsec_mdio_t *phyregs;
-       volatile tsec_mdio_t *phyregs_sgmii;
+       tsec_t *regs;
+       tsec_mdio_t *phyregs;
+       tsec_mdio_t *phyregs_sgmii;
        struct phy_info *phyinfo;
        uint phyaddr;
        u32 flags;