config TARGET_MX6Q_ICORE
bool "Support Engicam i.Core"
+ select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
+ select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_LOAD_FIT
config TARGET_MX6Q_ICORE_RQS
bool "Support Engicam i.Core RQS"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
+ select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_LOAD_FIT
config TARGET_MX6QSABREAUTO
bool "mx6qsabreauto"
config TARGET_MX6UL_GEAM
bool "Support Engicam GEAM6UL"
+ select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
select DM
imx6ul-isiot-nand.dtb \
imx6ul-opos6uldev.dtb
-dtb-$(CONFIG_MX7) += imx7-colibri.dtb
+dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
+ imx7d-sdb.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include "imx7.dtsi"
+#include "imx7d.dtsi"
/ {
model = "Toradex Colibri iMX7S/D";
&iomuxc_lpsr {
pinctrl_i2c1: i2c1-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f
- MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f
>;
};
pinctrl_i2c1_gpio: i2c1-gpio-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x4000007f
- MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x4000007f
>;
};
};
+++ /dev/null
-/*
- * Copyright 2016 Toradex AG
- *
- * SPDX-License-Identifier: GPL-2.0+ or X11
- */
-#include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
-
-/ {
- aliases {
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- gpio6 = &gpio7;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- i2c3 = &i2c4;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- serial6 = &uart7;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- aips1: aips-bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30000000 0x400000>;
- ranges;
-
- gpio1: gpio@30200000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30200000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio2: gpio@30210000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30210000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio3: gpio@30220000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30220000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio4: gpio@30230000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30230000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio5: gpio@30240000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30240000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio6: gpio@30250000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30250000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio7: gpio@30260000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30260000 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- iomuxc_lpsr: iomuxc-lpsr@302c0000 {
- compatible = "fsl,imx7d-iomuxc-lpsr";
- reg = <0x302c0000 0x10000>;
- fsl,input-sel = <&iomuxc>;
- };
-
- iomuxc: iomuxc@30330000 {
- compatible = "fsl,imx7d-iomuxc";
- reg = <0x30330000 0x10000>;
- };
- };
-
- aips3: aips-bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30800000 0x400000>;
- ranges;
-
- uart1: serial@30860000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- status = "disabled";
- };
-
- uart2: serial@30890000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- status = "disabled";
- };
-
- uart3: serial@30880000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- status = "disabled";
- };
-
- i2c1: i2c@30a20000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a20000 0x10000>;
- status = "disabled";
- };
-
- i2c2: i2c@30a30000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a30000 0x10000>;
- status = "disabled";
- };
-
- i2c3: i2c@30a40000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a40000 0x10000>;
- status = "disabled";
- };
-
- i2c4: i2c@30a50000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a50000 0x10000>;
- status = "disabled";
- };
-
- uart4: serial@30a60000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a60000 0x10000>;
- status = "disabled";
- };
-
- uart5: serial@30a70000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a70000 0x10000>;
- status = "disabled";
- };
-
- uart6: serial@30a80000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a80000 0x10000>;
- status = "disabled";
- };
-
- uart7: serial@30a90000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a90000 0x10000>;
- status = "disabled";
- };
- };
- };
-};
/*
* Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
*
- * SPDX-License-Identifier: GPL-2.0+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
*/
#ifndef __DTS_IMX7D_PINFUNC_H
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
-#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3
-#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3
-#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3
-#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3
-#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1
-#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1
-#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4
-#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2
-#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1
-#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5
-#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2
-#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1
-#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1
-#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4
-#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2
-#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1
-#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1
-#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5
-#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2
-#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1
#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0
#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0
#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0
--- /dev/null
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+ model = "Freescale i.MX7 SabreSD Board";
+ compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ spi4 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "okay";
+ gpio-sck = <&gpio1 13 0>;
+ gpio-mosi = <&gpio1 9 0>;
+ cs-gpios = <&gpio1 12 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio_spi: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <1>;
+ registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_sd1_vmmc: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_SD1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <200000>;
+ enable-active-high;
+ };
+ };
+};
+
+&iomuxc {
+ imx7d-sdb {
+ pinctrl_spi1: spi1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
+ MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x19 /* WL_REG_ON */
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x19 /* WL_HOST_WAKE */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_sd1_vmmc>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+
+/ {
+ cpus {
+ cpu0: cpu@0 {
+ operating-points = <
+ /* KHz uV */
+ 996000 1075000
+ 792000 975000
+ >;
+ clock-frequency = <996000000>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ clock-frequency = <996000000>;
+ };
+ };
+
+ soc {
+ etm@3007d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007d000 0x1000>;
+
+ /*
+ * System will hang if added nosmp in kernel command line
+ * without arm,primecell-periphid because amba bus try to
+ * read id and core1 power off at this time.
+ */
+ arm,primecell-periphid = <0xbb956>;
+ cpu = <&cpu1>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
+ };
+ };
+ };
+};
+
+&aips3 {
+ usbotg2: usb@30b20000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b20000 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@30b20200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b20200 0x200>;
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ };
+
+ fec2: ethernet@30bf0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+};
+
+&ca_funnel_ports {
+ port@1 {
+ reg = <1>;
+ ca_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out_port>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
+
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <792000000>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX7D_CLK_ARM>;
+ };
+ };
+
+ ckil: clock-cki {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ funnel@30041000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x30041000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ca_funnel_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ ca_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ /* funnel output port */
+ port@2 {
+ reg = <0>;
+ ca_funnel_out_port0: endpoint {
+ remote-endpoint = <&hugo_funnel_in_port0>;
+ };
+ };
+
+ /* the other input ports are not connect to anything */
+ };
+ };
+
+ etm@3007c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007c000 0x1000>;
+ cpu = <&cpu0>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
+ };
+ };
+
+ funnel@30083000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x30083000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ hugo_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ca_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hugo_funnel_in_port1: endpoint {
+ slave-mode; /* M4 input */
+ };
+ };
+
+ port@2 {
+ reg = <0>;
+ hugo_funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+
+ /* the other input ports are not connect to anything */
+ };
+ };
+
+ etf@30084000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x30084000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ etf_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&hugo_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ etf_out_port: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+ };
+ };
+
+ etr@30086000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x30086000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etr_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ tpiu@30087000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x30087000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ replicator {
+ /*
+ * non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell"
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller@31001000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x31001000 0x1000>,
+ <0x31002000 0x2000>,
+ <0x31004000 0x2000>,
+ <0x31006000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ aips1: aips-bus@30000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x400000>;
+ ranges;
+
+ gpio1: gpio@30200000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
+ };
+
+ gpio2: gpio@30210000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30210000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 13 32>;
+ };
+
+ gpio3: gpio@30220000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30220000 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 45 29>;
+ };
+
+ gpio4: gpio@30230000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30230000 0x10000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 74 24>;
+ };
+
+ gpio5: gpio@30240000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30240000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 98 18>;
+ };
+
+ gpio6: gpio@30250000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30250000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 116 23>;
+ };
+
+ gpio7: gpio@30260000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30260000 0x10000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 139 16>;
+ };
+
+ wdog1: wdog@30280000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x30280000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+ };
+
+ wdog2: wdog@30290000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x30290000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ wdog3: wdog@302a0000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x302a0000 0x10000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ wdog4: wdog@302b0000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x302b0000 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+ };
+
+ gpt1: gpt@302d0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302d0000 0x10000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt2: gpt@302e0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302e0000 0x10000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt3: gpt@302f0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302f0000 0x10000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt4: gpt@30300000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x30300000 0x10000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+ };
+
+ gpr: iomuxc-gpr@30340000 {
+ compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+ reg = <0x30340000 0x10000>;
+ };
+
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "fsl,imx7d-ocotp", "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clks IMX7D_OCOTP_CLK>;
+ };
+
+ anatop: anatop@30360000 {
+ compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x30360000 0x10000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ reg_1p0d: regulator-vdd1p0d {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p0d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ anatop-reg-offset = <0x210>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <8>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1200000>;
+ };
+ };
+
+ snvs: snvs@30370000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x30370000 0x10000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ clks: ccm@30380000 {
+ compatible = "fsl,imx7d-ccm";
+ reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>;
+ clock-names = "ckil", "osc";
+ };
+
+ src: src@30390000 {
+ compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ aips2: aips-bus@30400000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30400000 0x400000>;
+ ranges;
+
+ adc1: adc@30610000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30610000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ adc2: adc@30620000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30620000 0x10000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@30630000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30630000 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+ <&clks IMX7D_ECSPI4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ pwm1: pwm@30660000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+ <&clks IMX7D_PWM1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@30670000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+ <&clks IMX7D_PWM2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@30680000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+ <&clks IMX7D_PWM3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@30690000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+ <&clks IMX7D_PWM4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ lcdif: lcdif@30730000 {
+ compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30730000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+ <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
+ clock-names = "pix", "axi";
+ status = "disabled";
+ };
+ };
+
+ aips3: aips-bus@30800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30800000 0x400000>;
+ ranges;
+
+ ecspi1: ecspi@30820000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+ <&clks IMX7D_ECSPI1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@30830000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+ <&clks IMX7D_ECSPI2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@30840000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+ <&clks IMX7D_ECSPI3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@30860000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+ <&clks IMX7D_UART1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+ <&clks IMX7D_UART2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@30880000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+ <&clks IMX7D_UART3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sai1: sai@308a0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+ reg = <0x308a0000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+ <&clks IMX7D_SAI1_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+ status = "disabled";
+ };
+
+ sai2: sai@308b0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+ reg = <0x308b0000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+ <&clks IMX7D_SAI2_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+ status = "disabled";
+ };
+
+ sai3: sai@308c0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+ reg = <0x308c0000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+ <&clks IMX7D_SAI3_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+ status = "disabled";
+ };
+
+ flexcan1: can@30a00000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a00000 0x10000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan2: can@30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c1: i2c@30a20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a20000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@30a30000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a30000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@30a40000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a40000 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@30a50000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a50000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ uart4: serial@30a60000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a60000 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+ <&clks IMX7D_UART4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@30a70000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a70000 0x10000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+ <&clks IMX7D_UART5_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart6: serial@30a80000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a80000 0x10000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+ <&clks IMX7D_UART6_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart7: serial@30a90000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a90000 0x10000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+ <&clks IMX7D_UART7_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ usbotg1: usb@30b10000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b10000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbh: usb@30b30000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b30000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop3>;
+ fsl,usbmisc = <&usbmisc3 0>;
+ phy_type = "hsic";
+ dr_mode = "host";
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@30b10200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b10200 0x200>;
+ };
+
+ usbmisc3: usbmisc@30b30200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b30200 0x200>;
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY1_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop3: usbphynop3 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usdhc1: usdhc@30b40000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b40000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC1_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@30b50000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b50000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC2_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@30b60000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b60000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC3_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ sdma: sdma@30bd0000 {
+ compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+ reg = <0x30bd0000 0x10000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SDMA_CORE_CLK>,
+ <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ fec1: ethernet@30be0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30be0000 0x10000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+ };
+ };
+};
reg = readb(&imx_rdc_sema->gate[per_id % SEMA_GATES_NUM]);
if ((reg & RDC_SEMA_GATE_GTFSM_MASK) != RDC_SEMA_PROC_ID)
- return 1; /*Not the semaphore owner */
+ return -EACCES; /*Not the semaphore owner */
writeb(0x0, &imx_rdc_sema->gate[per_id % SEMA_GATES_NUM]);
#endif
__raw_writel(i, &cur_gpt->control);
- gd->arch.tbl = __raw_readl(&cur_gpt->counter);
- gd->arch.tbu = 0;
-
return 0;
}
imx_iomux_v3_setup_pad(MX6Q_##def);
#define SETUP_IOMUX_PADS(x) \
imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#elif defined(CONFIG_MX6UL)
+#define IOMUX_PADS(x) MX6_##x
+#define SETUP_IOMUX_PAD(def) \
+ imx_iomux_v3_setup_pad(MX6_##def);
+#define SETUP_IOMUX_PADS(x) \
+ imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
#else
#define IOMUX_PADS(x) MX6DL_##x
#define SETUP_IOMUX_PAD(def) \
--- /dev/null
+# Copyright (C) 2016 Amarula Solutions B.V.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := board.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/arch/sys_proto.h>
+
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+static void mmc_late_init(void)
+{
+ char cmd[32];
+ char mmcblk[32];
+ u32 dev_no = mmc_get_env_dev();
+
+ setenv_ulong("mmcdev", dev_no);
+
+ /* Set mmcblk env */
+ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
+ setenv("mmcroot", mmcblk);
+
+ sprintf(cmd, "mmc dev %d", dev_no);
+ run_command(cmd, 0);
+}
+#endif
+
+int board_late_init(void)
+{
+ switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
+ IMX6_BMODE_SHIFT) {
+ case IMX6_BMODE_SD:
+ case IMX6_BMODE_ESD:
+ case IMX6_BMODE_MMC:
+ case IMX6_BMODE_EMMC:
+#ifdef CONFIG_ENV_IS_IN_MMC
+ mmc_late_init();
+#endif
+ setenv("modeboot", "mmcboot");
+ break;
+ case IMX6_BMODE_NAND:
+ setenv("modeboot", "nandboot");
+ break;
+ default:
+ setenv("modeboot", "");
+ break;
+ }
+
+ setenv_fdt_file();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_NAND_MXS
+ setup_gpmi_nand();
+#endif
+
+#ifdef CONFIG_VIDEO_IPUV3
+ setup_display();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+void setenv_fdt_file(void);
+void setup_gpmi_nand(void);
+void setup_display(void);
+#endif /* _BOARD_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/video.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart_pads[] = {
+#ifdef CONFIG_MX6QDL
+ IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+#elif CONFIG_MX6UL
+ IOMUX_PADS(PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL)),
+#endif
+};
+
+#ifdef CONFIG_MX6QDL
+/*
+ * Driving strength:
+ * 0x30 == 40 Ohm
+ * 0x28 == 48 Ohm
+ */
+#define IMX6DQ_DRIVE_STRENGTH 0x30
+#define IMX6SDL_DRIVE_STRENGTH 0x28
+
+/* configure MX6Q/DUAL mmdc DDR io registers */
+static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
+ .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_cas = IMX6DQ_DRIVE_STRENGTH,
+ .dram_ras = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_reset = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
+};
+
+/* configure MX6Q/DUAL mmdc GRP io registers */
+static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
+ .grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_addds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_ddr_type = 0x000c0000,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
+struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
+ .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_cas = IMX6SDL_DRIVE_STRENGTH,
+ .dram_ras = IMX6SDL_DRIVE_STRENGTH,
+ .dram_reset = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
+struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
+ .grp_ddr_type = 0x000c0000,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_addds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_ddrmode = 0x00020000,
+ .grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
+};
+
+/* mt41j256 */
+static struct mx6_ddr3_cfg mt41j256 = {
+ .mem_speed = 1066,
+ .density = 2,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 13,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+ .SRT = 0,
+};
+
+static struct mx6_mmdc_calibration mx6dq_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x000E0009,
+ .p0_mpwldectrl1 = 0x0018000E,
+ .p1_mpwldectrl0 = 0x00000007,
+ .p1_mpwldectrl1 = 0x00000000,
+ .p0_mpdgctrl0 = 0x43280334,
+ .p0_mpdgctrl1 = 0x031C0314,
+ .p1_mpdgctrl0 = 0x4318031C,
+ .p1_mpdgctrl1 = 0x030C0258,
+ .p0_mprddlctl = 0x3E343A40,
+ .p1_mprddlctl = 0x383C3844,
+ .p0_mpwrdlctl = 0x40404440,
+ .p1_mpwrdlctl = 0x4C3E4446,
+};
+
+/* DDR 64bit */
+static struct mx6_ddr_sysinfo mem_q = {
+ .ddr_type = DDR_TYPE_DDR3,
+ .dsize = 2,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 2,
+ .rtt_wr = 2,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+static struct mx6_mmdc_calibration mx6dl_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x001F0024,
+ .p0_mpwldectrl1 = 0x00110018,
+ .p1_mpwldectrl0 = 0x001F0024,
+ .p1_mpwldectrl1 = 0x00110018,
+ .p0_mpdgctrl0 = 0x4230022C,
+ .p0_mpdgctrl1 = 0x02180220,
+ .p1_mpdgctrl0 = 0x42440248,
+ .p1_mpdgctrl1 = 0x02300238,
+ .p0_mprddlctl = 0x44444A48,
+ .p1_mprddlctl = 0x46484A42,
+ .p0_mpwrdlctl = 0x38383234,
+ .p1_mpwrdlctl = 0x3C34362E,
+};
+
+/* DDR 64bit 1GB */
+static struct mx6_ddr_sysinfo mem_dl = {
+ .dsize = 2,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 1,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+/* DDR 32bit 512MB */
+static struct mx6_ddr_sysinfo mem_s = {
+ .dsize = 1,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 1,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+#endif /* CONFIG_MX6QDL */
+
+#ifdef CONFIG_MX6UL
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_addds = 0x00000030,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_b0ds = 0x00000030,
+ .grp_ctlds = 0x00000030,
+ .grp_b1ds = 0x00000030,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_dqm0 = 0x00000030,
+ .dram_dqm1 = 0x00000030,
+ .dram_ras = 0x00000030,
+ .dram_cas = 0x00000030,
+ .dram_odt0 = 0x00000030,
+ .dram_odt1 = 0x00000030,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdclk_0 = 0x00000008,
+ .dram_sdqs0 = 0x00000038,
+ .dram_sdqs1 = 0x00000030,
+ .dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x00070007,
+ .p0_mpdgctrl0 = 0x41490145,
+ .p0_mprddlctl = 0x40404546,
+ .p0_mpwrdlctl = 0x4040524D,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+ .dsize = 0,
+ .cs_density = 20,
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 2,
+ .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ .ddr_type = DDR_TYPE_DDR3,
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 800,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+#ifdef TARGET_MX6UL_ISIOT
+ .rowaddr = 15,
+#else
+ .rowaddr = 13,
+#endif
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+#endif /* CONFIG_MX6UL */
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+#ifdef CONFIG_MX6QDL
+ writel(0x00003F3F, &ccm->CCGR0);
+ writel(0x0030FC00, &ccm->CCGR1);
+ writel(0x000FC000, &ccm->CCGR2);
+ writel(0x3F300000, &ccm->CCGR3);
+ writel(0xFF00F300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003CC, &ccm->CCGR6);
+#elif CONFIG_MX6UL
+ writel(0x00c03f3f, &ccm->CCGR0);
+ writel(0xfcffff00, &ccm->CCGR1);
+ writel(0x0cffffcc, &ccm->CCGR2);
+ writel(0x3f3c3030, &ccm->CCGR3);
+ writel(0xff00fffc, &ccm->CCGR4);
+ writel(0x033f30ff, &ccm->CCGR5);
+ writel(0x00c00fff, &ccm->CCGR6);
+#endif
+}
+
+static void gpr_init(void)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* enable AXI cache for VDOA/VPU/IPU */
+ writel(0xF00000CF, &iomux->gpr[4]);
+ /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+ writel(0x007F007F, &iomux->gpr[6]);
+ writel(0x007F007F, &iomux->gpr[7]);
+}
+
+static void spl_dram_init(void)
+{
+#ifdef CONFIG_MX6QDL
+ if (is_mx6solo()) {
+ mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+ mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256);
+ } else if (is_mx6dl()) {
+ mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+ mx6_dram_cfg(&mem_dl, &mx6dl_mmdc_calib, &mt41j256);
+ } else if (is_mx6dq()) {
+ mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
+ mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256);
+ }
+#elif CONFIG_MX6UL
+ mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+#endif
+
+ udelay(100);
+}
+
+void board_init_f(ulong dummy)
+{
+ ccgr_init();
+
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ gpr_init();
+
+ /* iomux */
+ SETUP_IOMUX_PADS(uart_pads);
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
*/
#include <common.h>
+#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+#include "../common/board.h"
- return 0;
-}
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
static iomux_v3_cfg_t const nand_pads[] = {
- MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
};
-static void setup_gpmi_nand(void)
+void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
/* config gpmi nand iomux */
- imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+ SETUP_IOMUX_PADS(nand_pads);
clrbits_le32(&mxc_ccm->CCGR4,
MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
}
#endif /* CONFIG_NAND_MXS */
-int board_init(void)
+void setenv_fdt_file(void)
{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
+ if (is_mx6ul())
+ setenv("fdt_file", "imx6ul-geam-kit.dtb");
}
#ifdef CONFIG_SPL_BUILD
-#include <libfdt.h>
-#include <spl.h>
-
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/mx6-ddr.h>
-
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
#include <mmc.h>
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
/* VSELECT */
- MX6_PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
/* CD */
- MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* RST_B */
- MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ SETUP_IOMUX_PADS(usdhc1_pads);
gpio_direction_input(USDHC1_CD_GPIO);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
break;
return 0;
}
#endif /* CONFIG_FSL_ESDHC */
-
-static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
- .grp_addds = 0x00000030,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_b0ds = 0x00000030,
- .grp_ctlds = 0x00000030,
- .grp_b1ds = 0x00000030,
- .grp_ddrpke = 0x00000000,
- .grp_ddrmode = 0x00020000,
- .grp_ddr_type = 0x000c0000,
-};
-
-static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
- .dram_dqm0 = 0x00000030,
- .dram_dqm1 = 0x00000030,
- .dram_ras = 0x00000030,
- .dram_cas = 0x00000030,
- .dram_odt0 = 0x00000030,
- .dram_odt1 = 0x00000030,
- .dram_sdba2 = 0x00000000,
- .dram_sdclk_0 = 0x00000008,
- .dram_sdqs0 = 0x00000038,
- .dram_sdqs1 = 0x00000030,
- .dram_reset = 0x00000030,
-};
-
-static struct mx6_mmdc_calibration mx6_mmcd_calib = {
- .p0_mpwldectrl0 = 0x00070007,
- .p0_mpdgctrl0 = 0x41490145,
- .p0_mprddlctl = 0x40404546,
- .p0_mpwrdlctl = 0x4040524D,
-};
-
-struct mx6_ddr_sysinfo ddr_sysinfo = {
- .dsize = 0,
- .cs_density = 20,
- .ncs = 1,
- .cs1_mirror = 0,
- .rtt_wr = 2,
- .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
- .walat = 1, /* Write additional latency */
- .ralat = 5, /* Read additional latency */
- .mif3_mode = 3, /* Command prediction working mode */
- .bi_on = 1, /* Bank interleaving enabled */
- .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
- .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
- .ddr_type = DDR_TYPE_DDR3,
-};
-
-static struct mx6_ddr3_cfg mem_ddr = {
- .mem_speed = 800,
- .density = 4,
- .width = 16,
- .banks = 8,
- .rowaddr = 13,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
-};
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0xFFFFFFFF, &ccm->CCGR0);
- writel(0xFFFFFFFF, &ccm->CCGR1);
- writel(0xFFFFFFFF, &ccm->CCGR2);
- writel(0xFFFFFFFF, &ccm->CCGR3);
- writel(0xFFFFFFFF, &ccm->CCGR4);
- writel(0xFFFFFFFF, &ccm->CCGR5);
- writel(0xFFFFFFFF, &ccm->CCGR6);
- writel(0xFFFFFFFF, &ccm->CCGR7);
-}
-
-static void spl_dram_init(void)
-{
- mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
- mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
-}
-
-void board_init_f(ulong dummy)
-{
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- ccgr_init();
-
- /* iomux and setup of i2c */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* DDR initialization */
- spl_dram_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
#endif /* CONFIG_SPL_BUILD */
S: Maintained
F: board/engicam/icorem6
F: include/configs/imx6qdl_icore.h
-F: configs/imx6q_icore_mmc_defconfig
-F: configs/imx6q_icore_nand_defconfig
-F: configs/imx6dl_icore_mmc_defconfig
-F: configs/imx6dl_icore_nand_defconfig
+F: configs/imx6qdl_icore_mmc_defconfig
+F: configs/imx6qdl_icore_nand_defconfig
F: arch/arm/dts/imx6qdl-icore.dtsi
F: arch/arm/dts/imx6q-icore.dts
F: arch/arm/dts/imx6dl-icore.dts
*/
#include <common.h>
+#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/video.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#include "../common/board.h"
-static iomux_v3_cfg_t const uart4_pads[] = {
- IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
};
-static void setup_gpmi_nand(void)
+void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
size_t display_count = ARRAY_SIZE(displays);
-static void setup_display(void)
+void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
}
#endif /* CONFIG_VIDEO_IPUV3 */
-int board_early_init_f(void)
-{
- SETUP_IOMUX_PADS(uart4_pads);
-
- return 0;
-}
-
-int board_init(void)
+void setenv_fdt_file(void)
{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
-#endif
-
-#ifdef CONFIG_VIDEO_IPUV3
- setup_display();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
+ if (is_mx6dq())
+ setenv("fdt_file", "imx6q-icore.dtb");
+ else if(is_mx6dl() || is_mx6solo())
+ setenv("fdt_file", "imx6dl-icore.dtb");
}
#ifdef CONFIG_SPL_BUILD
-#include <libfdt.h>
-#include <spl.h>
-
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/mx6-ddr.h>
-
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
#include <mmc.h>
}
#endif
-/*
- * Driving strength:
- * 0x30 == 40 Ohm
- * 0x28 == 48 Ohm
- */
-
-#define IMX6DQ_DRIVE_STRENGTH 0x30
-#define IMX6SDL_DRIVE_STRENGTH 0x28
-
-/* configure MX6Q/DUAL mmdc DDR io registers */
-static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
- .dram_sdqs0 = 0x28,
- .dram_sdqs1 = 0x28,
- .dram_sdqs2 = 0x28,
- .dram_sdqs3 = 0x28,
- .dram_sdqs4 = 0x28,
- .dram_sdqs5 = 0x28,
- .dram_sdqs6 = 0x28,
- .dram_sdqs7 = 0x28,
- .dram_dqm0 = 0x28,
- .dram_dqm1 = 0x28,
- .dram_dqm2 = 0x28,
- .dram_dqm3 = 0x28,
- .dram_dqm4 = 0x28,
- .dram_dqm5 = 0x28,
- .dram_dqm6 = 0x28,
- .dram_dqm7 = 0x28,
- .dram_cas = 0x30,
- .dram_ras = 0x30,
- .dram_sdclk_0 = 0x30,
- .dram_sdclk_1 = 0x30,
- .dram_reset = 0x30,
- .dram_sdcke0 = 0x3000,
- .dram_sdcke1 = 0x3000,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x30,
- .dram_sdodt1 = 0x30,
-};
-
-/* configure MX6Q/DUAL mmdc GRP io registers */
-static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
- .grp_b0ds = 0x30,
- .grp_b1ds = 0x30,
- .grp_b2ds = 0x30,
- .grp_b3ds = 0x30,
- .grp_b4ds = 0x30,
- .grp_b5ds = 0x30,
- .grp_b6ds = 0x30,
- .grp_b7ds = 0x30,
- .grp_addds = 0x30,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_ddrmode = 0x00020000,
- .grp_ctlds = 0x30,
- .grp_ddr_type = 0x000c0000,
-};
-
-/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
-struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
- .dram_sdclk_0 = 0x30,
- .dram_sdclk_1 = 0x30,
- .dram_cas = 0x30,
- .dram_ras = 0x30,
- .dram_reset = 0x30,
- .dram_sdcke0 = 0x30,
- .dram_sdcke1 = 0x30,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x30,
- .dram_sdodt1 = 0x30,
- .dram_sdqs0 = 0x28,
- .dram_sdqs1 = 0x28,
- .dram_sdqs2 = 0x28,
- .dram_sdqs3 = 0x28,
- .dram_sdqs4 = 0x28,
- .dram_sdqs5 = 0x28,
- .dram_sdqs6 = 0x28,
- .dram_sdqs7 = 0x28,
- .dram_dqm0 = 0x28,
- .dram_dqm1 = 0x28,
- .dram_dqm2 = 0x28,
- .dram_dqm3 = 0x28,
- .dram_dqm4 = 0x28,
- .dram_dqm5 = 0x28,
- .dram_dqm6 = 0x28,
- .dram_dqm7 = 0x28,
-};
-
-/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
-struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
- .grp_ddr_type = 0x000c0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = 0x30,
- .grp_ctlds = 0x30,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = 0x28,
- .grp_b1ds = 0x28,
- .grp_b2ds = 0x28,
- .grp_b3ds = 0x28,
- .grp_b4ds = 0x28,
- .grp_b5ds = 0x28,
- .grp_b6ds = 0x28,
- .grp_b7ds = 0x28,
-};
-
-/* mt41j256 */
-static struct mx6_ddr3_cfg mt41j256 = {
- .mem_speed = 1066,
- .density = 2,
- .width = 16,
- .banks = 8,
- .rowaddr = 13,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
- .SRT = 0,
-};
-
-static struct mx6_mmdc_calibration mx6dq_mmdc_calib = {
- .p0_mpwldectrl0 = 0x000E0009,
- .p0_mpwldectrl1 = 0x0018000E,
- .p1_mpwldectrl0 = 0x00000007,
- .p1_mpwldectrl1 = 0x00000000,
- .p0_mpdgctrl0 = 0x43280334,
- .p0_mpdgctrl1 = 0x031C0314,
- .p1_mpdgctrl0 = 0x4318031C,
- .p1_mpdgctrl1 = 0x030C0258,
- .p0_mprddlctl = 0x3E343A40,
- .p1_mprddlctl = 0x383C3844,
- .p0_mpwrdlctl = 0x40404440,
- .p1_mpwrdlctl = 0x4C3E4446,
-};
-
-/* DDR 64bit */
-static struct mx6_ddr_sysinfo mem_q = {
- .ddr_type = DDR_TYPE_DDR3,
- .dsize = 2,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 2,
- .rtt_wr = 2,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
-};
-
-static struct mx6_mmdc_calibration mx6dl_mmdc_calib = {
- .p0_mpwldectrl0 = 0x001F0024,
- .p0_mpwldectrl1 = 0x00110018,
- .p1_mpwldectrl0 = 0x001F0024,
- .p1_mpwldectrl1 = 0x00110018,
- .p0_mpdgctrl0 = 0x4230022C,
- .p0_mpdgctrl1 = 0x02180220,
- .p1_mpdgctrl0 = 0x42440248,
- .p1_mpdgctrl1 = 0x02300238,
- .p0_mprddlctl = 0x44444A48,
- .p1_mprddlctl = 0x46484A42,
- .p0_mpwrdlctl = 0x38383234,
- .p1_mpwrdlctl = 0x3C34362E,
-};
-
-/* DDR 64bit 1GB */
-static struct mx6_ddr_sysinfo mem_dl = {
- .dsize = 2,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 1,
- .rtt_wr = 1,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
-};
-
-/* DDR 32bit 512MB */
-static struct mx6_ddr_sysinfo mem_s = {
- .dsize = 1,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 1,
- .rtt_wr = 1,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
-};
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00003F3F, &ccm->CCGR0);
- writel(0x0030FC00, &ccm->CCGR1);
- writel(0x000FC000, &ccm->CCGR2);
- writel(0x3F300000, &ccm->CCGR3);
- writel(0xFF00F300, &ccm->CCGR4);
- writel(0x0F0000C3, &ccm->CCGR5);
- writel(0x000003CC, &ccm->CCGR6);
-}
-
-static void gpr_init(void)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
- /* enable AXI cache for VDOA/VPU/IPU */
- writel(0xF00000CF, &iomux->gpr[4]);
- /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
- writel(0x007F007F, &iomux->gpr[6]);
- writel(0x007F007F, &iomux->gpr[7]);
-}
-
-static void spl_dram_init(void)
-{
- if (is_mx6solo()) {
- mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256);
- } else if (is_mx6dl()) {
- mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&mem_dl, &mx6dl_mmdc_calib, &mt41j256);
- } else if (is_mx6dq()) {
- mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
- mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256);
- }
-
- udelay(100);
-}
-
-void board_init_f(ulong dummy)
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
{
- ccgr_init();
-
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- gpr_init();
-
- /* iomux */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* DDR initialization */
- spl_dram_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
+ if (is_mx6dq() && !strcmp(name, "imx6q-icore"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore"))
+ return 0;
+ else
+ return -1;
}
#endif
+#endif /* CONFIG_SPL_BUILD */
S: Maintained
F: board/engicam/icorem6_rqs
F: include/configs/imx6qdl_icore_rqs.h
-F: configs/imx6q_icore_rqs_mmc_defconfig
-F: configs/imx6dl_icore_rqs_mmc_defconfig
+F: configs/imx6qdl_icore_rqs_mmc_defconfig
F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
F: arch/arm/dts/imx6q-icore-rqs.dts
F: arch/arm/dts/imx6dl-icore-rqs.dts
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart4_pads[] = {
- IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-int board_early_init_f(void)
-{
- SETUP_IOMUX_PADS(uart4_pads);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+#include "../common/board.h"
- return 0;
-}
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ENV_IS_IN_MMC
int board_mmc_get_env_dev(int devno)
/* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
return (devno == 3) ? 1 : 0;
}
-
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
#endif
-int board_late_init(void)
+void setenv_fdt_file(void)
{
- switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
- IMX6_BMODE_SHIFT) {
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD:
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC:
-#ifdef CONFIG_ENV_IS_IN_MMC
- mmc_late_init();
-#endif
- setenv("modeboot", "mmcboot");
- break;
- default:
- setenv("modeboot", "");
- break;
- }
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
+ if (is_mx6dq())
+ setenv("fdt_file", "imx6q-icore-rqs.dtb");
+ else if(is_mx6dl() || is_mx6solo())
+ setenv("fdt_file", "imx6dl-icore-rqs.dtb");
}
#ifdef CONFIG_SPL_BUILD
-#include <libfdt.h>
#include <spl.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/mx6-ddr.h>
-
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
#include <mmc.h>
#endif
#endif
-/*
- * Driving strength:
- * 0x30 == 40 Ohm
- * 0x28 == 48 Ohm
- */
-
-#define IMX6DQ_DRIVE_STRENGTH 0x30
-#define IMX6SDL_DRIVE_STRENGTH 0x28
-
-/* configure MX6Q/DUAL mmdc DDR io registers */
-static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
- .dram_sdqs0 = 0x28,
- .dram_sdqs1 = 0x28,
- .dram_sdqs2 = 0x28,
- .dram_sdqs3 = 0x28,
- .dram_sdqs4 = 0x28,
- .dram_sdqs5 = 0x28,
- .dram_sdqs6 = 0x28,
- .dram_sdqs7 = 0x28,
- .dram_dqm0 = 0x28,
- .dram_dqm1 = 0x28,
- .dram_dqm2 = 0x28,
- .dram_dqm3 = 0x28,
- .dram_dqm4 = 0x28,
- .dram_dqm5 = 0x28,
- .dram_dqm6 = 0x28,
- .dram_dqm7 = 0x28,
- .dram_cas = 0x30,
- .dram_ras = 0x30,
- .dram_sdclk_0 = 0x30,
- .dram_sdclk_1 = 0x30,
- .dram_reset = 0x30,
- .dram_sdcke0 = 0x3000,
- .dram_sdcke1 = 0x3000,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x30,
- .dram_sdodt1 = 0x30,
-};
-
-/* configure MX6Q/DUAL mmdc GRP io registers */
-static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
- .grp_b0ds = 0x30,
- .grp_b1ds = 0x30,
- .grp_b2ds = 0x30,
- .grp_b3ds = 0x30,
- .grp_b4ds = 0x30,
- .grp_b5ds = 0x30,
- .grp_b6ds = 0x30,
- .grp_b7ds = 0x30,
- .grp_addds = 0x30,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_ddrmode = 0x00020000,
- .grp_ctlds = 0x30,
- .grp_ddr_type = 0x000c0000,
-};
-
-/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
-struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
- .dram_sdclk_0 = 0x30,
- .dram_sdclk_1 = 0x30,
- .dram_cas = 0x30,
- .dram_ras = 0x30,
- .dram_reset = 0x30,
- .dram_sdcke0 = 0x30,
- .dram_sdcke1 = 0x30,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x30,
- .dram_sdodt1 = 0x30,
- .dram_sdqs0 = 0x28,
- .dram_sdqs1 = 0x28,
- .dram_sdqs2 = 0x28,
- .dram_sdqs3 = 0x28,
- .dram_sdqs4 = 0x28,
- .dram_sdqs5 = 0x28,
- .dram_sdqs6 = 0x28,
- .dram_sdqs7 = 0x28,
- .dram_dqm0 = 0x28,
- .dram_dqm1 = 0x28,
- .dram_dqm2 = 0x28,
- .dram_dqm3 = 0x28,
- .dram_dqm4 = 0x28,
- .dram_dqm5 = 0x28,
- .dram_dqm6 = 0x28,
- .dram_dqm7 = 0x28,
-};
-
-/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
-struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
- .grp_ddr_type = 0x000c0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = 0x30,
- .grp_ctlds = 0x30,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = 0x28,
- .grp_b1ds = 0x28,
- .grp_b2ds = 0x28,
- .grp_b3ds = 0x28,
- .grp_b4ds = 0x28,
- .grp_b5ds = 0x28,
- .grp_b6ds = 0x28,
- .grp_b7ds = 0x28,
-};
-
-/* mt41j256 */
-static struct mx6_ddr3_cfg mt41j256 = {
- .mem_speed = 1066,
- .density = 2,
- .width = 16,
- .banks = 8,
- .rowaddr = 13,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
- .SRT = 0,
-};
-
-static struct mx6_mmdc_calibration mx6dq_mmdc_calib = {
- .p0_mpwldectrl0 = 0x000E0009,
- .p0_mpwldectrl1 = 0x0018000E,
- .p1_mpwldectrl0 = 0x00000007,
- .p1_mpwldectrl1 = 0x00000000,
- .p0_mpdgctrl0 = 0x43280334,
- .p0_mpdgctrl1 = 0x031C0314,
- .p1_mpdgctrl0 = 0x4318031C,
- .p1_mpdgctrl1 = 0x030C0258,
- .p0_mprddlctl = 0x3E343A40,
- .p1_mprddlctl = 0x383C3844,
- .p0_mpwrdlctl = 0x40404440,
- .p1_mpwrdlctl = 0x4C3E4446,
-};
-
-/* DDR 64bit */
-static struct mx6_ddr_sysinfo mem_q = {
- .ddr_type = DDR_TYPE_DDR3,
- .dsize = 2,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 2,
- .rtt_wr = 2,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
-};
-
-static struct mx6_mmdc_calibration mx6dl_mmdc_calib = {
- .p0_mpwldectrl0 = 0x001F0024,
- .p0_mpwldectrl1 = 0x00110018,
- .p1_mpwldectrl0 = 0x001F0024,
- .p1_mpwldectrl1 = 0x00110018,
- .p0_mpdgctrl0 = 0x4230022C,
- .p0_mpdgctrl1 = 0x02180220,
- .p1_mpdgctrl0 = 0x42440248,
- .p1_mpdgctrl1 = 0x02300238,
- .p0_mprddlctl = 0x44444A48,
- .p1_mprddlctl = 0x46484A42,
- .p0_mpwrdlctl = 0x38383234,
- .p1_mpwrdlctl = 0x3C34362E,
-};
-
-/* DDR 64bit 1GB */
-static struct mx6_ddr_sysinfo mem_dl = {
- .dsize = 2,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 1,
- .rtt_wr = 1,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
-};
-
-/* DDR 32bit 512MB */
-static struct mx6_ddr_sysinfo mem_s = {
- .dsize = 1,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 1,
- .rtt_wr = 1,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
-};
-
-static void ccgr_init(void)
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00003F3F, &ccm->CCGR0);
- writel(0x0030FC00, &ccm->CCGR1);
- writel(0x000FC000, &ccm->CCGR2);
- writel(0x3F300000, &ccm->CCGR3);
- writel(0xFF00F300, &ccm->CCGR4);
- writel(0x0F0000C3, &ccm->CCGR5);
- writel(0x000003CC, &ccm->CCGR6);
-}
-
-static void gpr_init(void)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
- /* enable AXI cache for VDOA/VPU/IPU */
- writel(0xF00000CF, &iomux->gpr[4]);
- /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
- writel(0x007F007F, &iomux->gpr[6]);
- writel(0x007F007F, &iomux->gpr[7]);
-}
-
-static void spl_dram_init(void)
-{
- if (is_mx6solo()) {
- mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&mem_s, &mx6dl_mmdc_calib, &mt41j256);
- } else if (is_mx6dl()) {
- mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&mem_dl, &mx6dl_mmdc_calib, &mt41j256);
- } else if (is_mx6dq()) {
- mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
- mx6_dram_cfg(&mem_q, &mx6dq_mmdc_calib, &mt41j256);
- }
-
- udelay(100);
-}
-
-void board_init_f(ulong dummy)
-{
- ccgr_init();
-
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- gpr_init();
-
- /* iomux */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* DDR initialization */
- spl_dram_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
+ if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
+ return 0;
+ else
+ return -1;
}
#endif
+#endif /* CONFIG_SPL_BUILD */
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#include "../common/board.h"
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-
- return 0;
-}
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
static iomux_v3_cfg_t const nand_pads[] = {
- MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
- MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
};
-static void setup_gpmi_nand(void)
+void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
/* config gpmi nand iomux */
- imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+ SETUP_IOMUX_PADS(nand_pads);
clrbits_le32(&mxc_ccm->CCGR4,
MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
/* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
return (devno == 0) ? 0 : 1;
}
-
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
#endif
-int board_late_init(void)
+void setenv_fdt_file(void)
{
- switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
- IMX6_BMODE_SHIFT) {
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD:
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC:
+ if (is_mx6ul()) {
#ifdef CONFIG_ENV_IS_IN_MMC
- mmc_late_init();
+ setenv("fdt_file", "imx6ul-isiot-emmc.dtb");
+#else
+ setenv("fdt_file", "imx6ul-isiot-nand.dtb");
#endif
- setenv("modeboot", "mmcboot");
- break;
- case IMX6_BMODE_NAND:
- setenv("modeboot", "nandboot");
- break;
- default:
- setenv("modeboot", "");
- break;
}
-
- return 0;
-}
-
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
}
#ifdef CONFIG_SPL_BUILD
-#include <libfdt.h>
#include <spl.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/mx6-ddr.h>
-
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
#include <mmc.h>
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
/* VSELECT */
- MX6_PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
/* CD */
- MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* RST_B */
- MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const usdhc2_pads[] = {
- MX6_PAD_NAND_ALE__USDHC2_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IOMUX_PADS(PAD_NAND_ALE__USDHC2_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
};
#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 19)
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ SETUP_IOMUX_PADS(usdhc1_pads);
gpio_direction_input(USDHC1_CD_GPIO);
usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
break;
case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc2_pads));
+ SETUP_IOMUX_PADS(usdhc2_pads);
gpio_direction_input(USDHC2_CD_GPIO);
usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
break;
}
#endif
#endif /* CONFIG_FSL_ESDHC */
-
-static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
- .grp_addds = 0x00000030,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_b0ds = 0x00000030,
- .grp_ctlds = 0x00000030,
- .grp_b1ds = 0x00000030,
- .grp_ddrpke = 0x00000000,
- .grp_ddrmode = 0x00020000,
- .grp_ddr_type = 0x000c0000,
-};
-
-static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
- .dram_dqm0 = 0x00000030,
- .dram_dqm1 = 0x00000030,
- .dram_ras = 0x00000030,
- .dram_cas = 0x00000030,
- .dram_odt0 = 0x00000030,
- .dram_odt1 = 0x00000030,
- .dram_sdba2 = 0x00000000,
- .dram_sdclk_0 = 0x00000008,
- .dram_sdqs0 = 0x00000038,
- .dram_sdqs1 = 0x00000030,
- .dram_reset = 0x00000030,
-};
-
-static struct mx6_mmdc_calibration mx6_mmcd_calib = {
- .p0_mpwldectrl0 = 0x00070007,
- .p0_mpdgctrl0 = 0x41490145,
- .p0_mprddlctl = 0x40404546,
- .p0_mpwrdlctl = 0x4040524D,
-};
-
-struct mx6_ddr_sysinfo ddr_sysinfo = {
- .dsize = 0,
- .cs_density = 20,
- .ncs = 1,
- .cs1_mirror = 0,
- .rtt_wr = 2,
- .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
- .walat = 1, /* Write additional latency */
- .ralat = 5, /* Read additional latency */
- .mif3_mode = 3, /* Command prediction working mode */
- .bi_on = 1, /* Bank interleaving enabled */
- .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
- .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
- .ddr_type = DDR_TYPE_DDR3,
-};
-
-static struct mx6_ddr3_cfg mem_ddr = {
- .mem_speed = 800,
- .density = 4,
- .width = 16,
- .banks = 8,
- .rowaddr = 15,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
-};
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00c03f3f, &ccm->CCGR0);
- writel(0xfcffff00, &ccm->CCGR1);
- writel(0x0cffffcc, &ccm->CCGR2);
- writel(0x3f3c3030, &ccm->CCGR3);
- writel(0xff00fffc, &ccm->CCGR4);
- writel(0x033f30ff, &ccm->CCGR5);
- writel(0x00c00fff, &ccm->CCGR6);
-}
-
-static void spl_dram_init(void)
-{
- mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
- mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
-}
-
-void board_init_f(ulong dummy)
-{
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- ccgr_init();
-
- /* iomux and setup of i2c */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* DDR initialization */
- spl_dram_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
#endif /* CONFIG_SPL_BUILD */
+++ /dev/null
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-
-BOOT_FROM sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x020e0774 0x000C0000
-DATA 4 0x020e0754 0x00000000
-DATA 4 0x020e04ac 0x00000030
-DATA 4 0x020e04b0 0x00000030
-DATA 4 0x020e0464 0x00000030
-DATA 4 0x020e0490 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e0494 0x00000030
-DATA 4 0x020e04a0 0x00000000
-DATA 4 0x020e04b4 0x00000030
-DATA 4 0x020e04b8 0x00000030
-DATA 4 0x020e076c 0x00000030
-DATA 4 0x020e0750 0x00020000
-DATA 4 0x020e04bc 0x00000030
-DATA 4 0x020e04c0 0x00000030
-DATA 4 0x020e04c4 0x00000030
-DATA 4 0x020e04c8 0x00000030
-DATA 4 0x020e04cc 0x00000030
-DATA 4 0x020e04d0 0x00000030
-DATA 4 0x020e04d4 0x00000030
-DATA 4 0x020e04d8 0x00000030
-DATA 4 0x020e0760 0x00020000
-DATA 4 0x020e0764 0x00000030
-DATA 4 0x020e0770 0x00000030
-DATA 4 0x020e0778 0x00000030
-DATA 4 0x020e077c 0x00000030
-DATA 4 0x020e0780 0x00000030
-DATA 4 0x020e0784 0x00000030
-DATA 4 0x020e078c 0x00000030
-DATA 4 0x020e0748 0x00000030
-DATA 4 0x020e0470 0x00000030
-DATA 4 0x020e0474 0x00000030
-DATA 4 0x020e0478 0x00000030
-DATA 4 0x020e047c 0x00000030
-DATA 4 0x020e0480 0x00000030
-DATA 4 0x020e0484 0x00000030
-DATA 4 0x020e0488 0x00000030
-DATA 4 0x020e048c 0x00000030
-DATA 4 0x021b0800 0xa1390003
-DATA 4 0x021b080c 0x001F001F
-DATA 4 0x021b0810 0x001F001F
-DATA 4 0x021b480c 0x001F001F
-DATA 4 0x021b4810 0x001F001F
-DATA 4 0x021b083c 0x4220021F
-DATA 4 0x021b0840 0x0207017E
-DATA 4 0x021b483c 0x4201020C
-DATA 4 0x021b4840 0x01660172
-DATA 4 0x021b0848 0x4A4D4E4D
-DATA 4 0x021b4848 0x4A4F5049
-DATA 4 0x021b0850 0x3F3C3D31
-DATA 4 0x021b4850 0x3238372B
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-DATA 4 0x021b481c 0x33333333
-DATA 4 0x021b4820 0x33333333
-DATA 4 0x021b4824 0x33333333
-DATA 4 0x021b4828 0x33333333
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b48b8 0x00000800
-DATA 4 0x021b0004 0x0002002D
-DATA 4 0x021b0008 0x00333030
-DATA 4 0x021b000c 0x3F435313
-DATA 4 0x021b0010 0xB66E8B63
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b0018 0x00001740
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b002c 0x000026d2
-DATA 4 0x021b0030 0x00431023
-DATA 4 0x021b0040 0x00000027
-DATA 4 0x021b0000 0x831A0000
-DATA 4 0x021b001c 0x04008032
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x00048031
-DATA 4 0x021b001c 0x05208030
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00011117
-DATA 4 0x021b4818 0x00011117
-DATA 4 0x021b0004 0x0002556D
-DATA 4 0x021b0404 0x00011006
-DATA 4 0x021b001c 0x00000000
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0x00FFF300
-DATA 4 0x020c407c 0x0F0000C3
-DATA 4 0x020c4080 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
+++ /dev/null
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
- * Jason Liu <r64343@freescale.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x020e05a8 0x00000030
-DATA 4 0x020e05b0 0x00000030
-DATA 4 0x020e0524 0x00000030
-DATA 4 0x020e051c 0x00000030
-
-DATA 4 0x020e0518 0x00000030
-DATA 4 0x020e050c 0x00000030
-DATA 4 0x020e05b8 0x00000030
-DATA 4 0x020e05c0 0x00000030
-
-DATA 4 0x020e05ac 0x00020030
-DATA 4 0x020e05b4 0x00020030
-DATA 4 0x020e0528 0x00020030
-DATA 4 0x020e0520 0x00020030
-
-DATA 4 0x020e0514 0x00020030
-DATA 4 0x020e0510 0x00020030
-DATA 4 0x020e05bc 0x00020030
-DATA 4 0x020e05c4 0x00020030
-
-DATA 4 0x020e056c 0x00020030
-DATA 4 0x020e0578 0x00020030
-DATA 4 0x020e0588 0x00020030
-DATA 4 0x020e0594 0x00020030
-
-DATA 4 0x020e057c 0x00020030
-DATA 4 0x020e0590 0x00003000
-DATA 4 0x020e0598 0x00003000
-DATA 4 0x020e058c 0x00000000
-
-DATA 4 0x020e059c 0x00003030
-DATA 4 0x020e05a0 0x00003030
-DATA 4 0x020e0784 0x00000030
-DATA 4 0x020e0788 0x00000030
-
-DATA 4 0x020e0794 0x00000030
-DATA 4 0x020e079c 0x00000030
-DATA 4 0x020e07a0 0x00000030
-DATA 4 0x020e07a4 0x00000030
-
-DATA 4 0x020e07a8 0x00000030
-DATA 4 0x020e0748 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e0750 0x00020000
-
-DATA 4 0x020e0758 0x00000000
-DATA 4 0x020e0774 0x00020000
-DATA 4 0x020e078c 0x00000030
-DATA 4 0x020e0798 0x000C0000
-
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-
-DATA 4 0x021b481c 0x33333333
-DATA 4 0x021b4820 0x33333333
-DATA 4 0x021b4824 0x33333333
-DATA 4 0x021b4828 0x33333333
-
-DATA 4 0x021b0018 0x00081740
-
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b000c 0x555A7974
-DATA 4 0x021b0010 0xDB538F64
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b002c 0x000026D2
-
-DATA 4 0x021b0030 0x005A1023
-DATA 4 0x021b0008 0x09444040
-DATA 4 0x021b0004 0x00025576
-DATA 4 0x021b0040 0x00000027
-DATA 4 0x021b0000 0x831A0000
-
-DATA 4 0x021b001c 0x04088032
-DATA 4 0x021b001c 0x0408803A
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x0000803B
-DATA 4 0x021b001c 0x00428031
-DATA 4 0x021b001c 0x00428039
-DATA 4 0x021b001c 0x19308030
-DATA 4 0x021b001c 0x19308038
-
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b001c 0x04008048
-DATA 4 0x021b0800 0xA1380003
-DATA 4 0x021b4800 0xA1380003
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00022227
-DATA 4 0x021b4818 0x00022227
-
-DATA 4 0x021b083c 0x434B0350
-DATA 4 0x021b0840 0x034C0359
-DATA 4 0x021b483c 0x434B0350
-DATA 4 0x021b4840 0x03650348
-DATA 4 0x021b0848 0x4436383B
-DATA 4 0x021b4848 0x39393341
-DATA 4 0x021b0850 0x35373933
-DATA 4 0x021b4850 0x48254A36
-
-DATA 4 0x021b080c 0x001F001F
-DATA 4 0x021b0810 0x001F001F
-
-DATA 4 0x021b480c 0x00440044
-DATA 4 0x021b4810 0x00440044
-
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b48b8 0x00000800
-
-DATA 4 0x021b001c 0x00000000
-DATA 4 0x021b0404 0x00011006
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0x00FFF300
-DATA 4 0x020c407c 0x0F0000C3
-DATA 4 0x020c4080 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
-
-/*
- * Setup CCM_CCOSR register as follows:
- *
- * cko1_en = 1 --> CKO1 enabled
- * cko1_div = 111 --> divide by 8
- * cko1_sel = 1011 --> ahb_clk_root
- *
- * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
- */
-DATA 4 0x020c4060 0x000000fb
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
-#include <asm/arch/mx6-ddr.h>
#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
}
static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
static iomux_v3_cfg_t const enet_pads[] = {
- MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
/* AR8031 PHY Reset */
- MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_iomux_enet(void)
{
- imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+ SETUP_IOMUX_PADS(enet_pads);
/* Reset AR8031 PHY */
gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
}
static iomux_v3_cfg_t const usdhc2_pads[] = {
- MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
};
static iomux_v3_cfg_t const usdhc3_pads[] = {
- MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
};
static iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
};
static iomux_v3_cfg_t const ecspi1_pads[] = {
- MX6_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const rgb_pads[] = {
- MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT18__IPU1_DISP0_DATA18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT19__IPU1_DISP0_DATA19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT20__IPU1_DISP0_DATA20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT21__IPU1_DISP0_DATA21 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT22__IPU1_DISP0_DATA22 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DISP0_DAT23__IPU1_DISP0_DATA23 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const bl_pads[] = {
- MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void enable_backlight(void)
{
- imx_iomux_v3_setup_multiple_pads(bl_pads, ARRAY_SIZE(bl_pads));
+ SETUP_IOMUX_PADS(bl_pads);
gpio_direction_output(DISP0_PWR_EN, 1);
}
static void enable_rgb(struct display_info_t const *dev)
{
- imx_iomux_v3_setup_multiple_pads(rgb_pads, ARRAY_SIZE(rgb_pads));
+ SETUP_IOMUX_PADS(rgb_pads);
enable_backlight();
}
enable_backlight();
}
-static struct i2c_pads_info i2c_pad_info1 = {
+static struct i2c_pads_info mx6q_i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
+ .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
+ .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+static struct i2c_pads_info mx6dl_i2c_pad_info1 = {
.scl = {
- .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
- .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
+ .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
+ .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
.gp = IMX_GPIO_NR(4, 12)
},
.sda = {
- .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
- .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
+ .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
+ .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
.gp = IMX_GPIO_NR(4, 13)
}
};
static void setup_spi(void)
{
- imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+ SETUP_IOMUX_PADS(ecspi1_pads);
}
iomux_v3_cfg_t const pcie_pads[] = {
- MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), /* POWER */
- MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), /* RESET */
+ IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* POWER */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* RESET */
};
static void setup_pcie(void)
{
- imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
+ SETUP_IOMUX_PADS(pcie_pads);
}
iomux_v3_cfg_t const di0_pads[] = {
- MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* DISP0_CLK */
- MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02, /* DISP0_HSYNC */
- MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, /* DISP0_VSYNC */
+ IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK), /* DISP0_CLK */
+ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* DISP0_HSYNC */
+ IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03), /* DISP0_VSYNC */
};
static void setup_iomux_uart(void)
{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+ SETUP_IOMUX_PADS(uart1_pads);
}
#ifdef CONFIG_FSL_ESDHC
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ SETUP_IOMUX_PADS(usdhc2_pads);
gpio_direction_input(USDHC2_CD_GPIO);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
break;
case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ SETUP_IOMUX_PADS(usdhc3_pads);
gpio_direction_input(USDHC3_CD_GPIO);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
break;
case 2:
- imx_iomux_v3_setup_multiple_pads(
- usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ SETUP_IOMUX_PADS(usdhc4_pads);
usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
break;
default:
switch (reg & 0x3) {
case 0x1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ SETUP_IOMUX_PADS(usdhc2_pads);
usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
break;
case 0x2:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ SETUP_IOMUX_PADS(usdhc3_pads);
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
break;
case 0x3:
- imx_iomux_v3_setup_multiple_pads(
- usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ SETUP_IOMUX_PADS(usdhc4_pads);
usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
int reg;
/* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */
- imx_iomux_v3_setup_multiple_pads(di0_pads, ARRAY_SIZE(di0_pads));
+ SETUP_IOMUX_PADS(di0_pads);
enable_ipu_clock();
imx_setup_hdmi();
#define UCTRL_PWR_POL (1 << 9)
static iomux_v3_cfg_t const usb_otg_pads[] = {
- MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const usb_hc1_pads[] = {
- MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_usb(void)
{
- imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
- ARRAY_SIZE(usb_otg_pads));
+ SETUP_IOMUX_PADS(usb_otg_pads);
/*
* set daisy chain for otg_pin_id on 6q.
*/
imx_iomux_set_gpr_register(1, 13, 1, 0);
- imx_iomux_v3_setup_multiple_pads(usb_hc1_pads,
- ARRAY_SIZE(usb_hc1_pads));
+ SETUP_IOMUX_PADS(usb_hc1_pads);
}
int board_ehci_hcd_init(int port)
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-
+ if (is_mx6dq() || is_mx6dqp())
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
+ else
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
#ifdef CONFIG_USB_EHCI_MX6
setup_usb();
#endif
}
#ifdef CONFIG_SPL_BUILD
+#include <asm/arch/mx6-ddr.h>
#include <spl.h>
#include <libfdt.h>
0x021b001c, 0x00000000,
};
+static int mx6dl_dcd_table[] = {
+ 0x020e0774, 0x000C0000,
+ 0x020e0754, 0x00000000,
+ 0x020e04ac, 0x00000030,
+ 0x020e04b0, 0x00000030,
+ 0x020e0464, 0x00000030,
+ 0x020e0490, 0x00000030,
+ 0x020e074c, 0x00000030,
+ 0x020e0494, 0x00000030,
+ 0x020e04a0, 0x00000000,
+ 0x020e04b4, 0x00000030,
+ 0x020e04b8, 0x00000030,
+ 0x020e076c, 0x00000030,
+ 0x020e0750, 0x00020000,
+ 0x020e04bc, 0x00000030,
+ 0x020e04c0, 0x00000030,
+ 0x020e04c4, 0x00000030,
+ 0x020e04c8, 0x00000030,
+ 0x020e04cc, 0x00000030,
+ 0x020e04d0, 0x00000030,
+ 0x020e04d4, 0x00000030,
+ 0x020e04d8, 0x00000030,
+ 0x020e0760, 0x00020000,
+ 0x020e0764, 0x00000030,
+ 0x020e0770, 0x00000030,
+ 0x020e0778, 0x00000030,
+ 0x020e077c, 0x00000030,
+ 0x020e0780, 0x00000030,
+ 0x020e0784, 0x00000030,
+ 0x020e078c, 0x00000030,
+ 0x020e0748, 0x00000030,
+ 0x020e0470, 0x00000030,
+ 0x020e0474, 0x00000030,
+ 0x020e0478, 0x00000030,
+ 0x020e047c, 0x00000030,
+ 0x020e0480, 0x00000030,
+ 0x020e0484, 0x00000030,
+ 0x020e0488, 0x00000030,
+ 0x020e048c, 0x00000030,
+ 0x021b0800, 0xa1390003,
+ 0x021b080c, 0x001F001F,
+ 0x021b0810, 0x001F001F,
+ 0x021b480c, 0x001F001F,
+ 0x021b4810, 0x001F001F,
+ 0x021b083c, 0x4220021F,
+ 0x021b0840, 0x0207017E,
+ 0x021b483c, 0x4201020C,
+ 0x021b4840, 0x01660172,
+ 0x021b0848, 0x4A4D4E4D,
+ 0x021b4848, 0x4A4F5049,
+ 0x021b0850, 0x3F3C3D31,
+ 0x021b4850, 0x3238372B,
+ 0x021b081c, 0x33333333,
+ 0x021b0820, 0x33333333,
+ 0x021b0824, 0x33333333,
+ 0x021b0828, 0x33333333,
+ 0x021b481c, 0x33333333,
+ 0x021b4820, 0x33333333,
+ 0x021b4824, 0x33333333,
+ 0x021b4828, 0x33333333,
+ 0x021b08b8, 0x00000800,
+ 0x021b48b8, 0x00000800,
+ 0x021b0004, 0x0002002D,
+ 0x021b0008, 0x00333030,
+ 0x021b000c, 0x3F435313,
+ 0x021b0010, 0xB66E8B63,
+ 0x021b0014, 0x01FF00DB,
+ 0x021b0018, 0x00001740,
+ 0x021b001c, 0x00008000,
+ 0x021b002c, 0x000026d2,
+ 0x021b0030, 0x00431023,
+ 0x021b0040, 0x00000027,
+ 0x021b0000, 0x831A0000,
+ 0x021b001c, 0x04008032,
+ 0x021b001c, 0x00008033,
+ 0x021b001c, 0x00048031,
+ 0x021b001c, 0x05208030,
+ 0x021b001c, 0x04008040,
+ 0x021b0020, 0x00005800,
+ 0x021b0818, 0x00011117,
+ 0x021b4818, 0x00011117,
+ 0x021b0004, 0x0002556D,
+ 0x021b0404, 0x00011006,
+ 0x021b001c, 0x00000000,
+};
+
static void ddr_init(int *table, int size)
{
int i;
ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
else if (is_mx6dqp())
ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
+ else if (is_mx6sdl())
+ ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
}
void board_init_f(ulong dummy)
#include <i2c.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/arch/crm_regs.h>
-#include <usb.h>
-#include <usb/ehci-ci.h>
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
-
#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM)
#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
-#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
-
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
PAD_CTL_DSE_3P3V_49OHM)
(PAD_CTL_HYS | PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_FAST)
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
-#ifdef CONFIG_SYS_I2C_MXC
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1 for PMIC */
-static struct i2c_pads_info i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC,
- .gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC,
- .gp = IMX_GPIO_NR(4, 8),
- },
- .sda = {
- .i2c_mode = MX7D_PAD_I2C1_SDA__I2C1_SDA | PC,
- .gpio_mode = MX7D_PAD_I2C1_SDA__GPIO4_IO9 | PC,
- .gp = IMX_GPIO_NR(4, 9),
- },
-};
-#endif
+#ifdef CONFIG_MXC_SPI
static iomux_v3_cfg_t const ecspi3_pads[] = {
MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
{
imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads));
}
+#endif
int dram_init(void)
{
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
- MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_RESET_B__GPIO5_IO2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
- MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_STROBE__SD3_STROBE | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
- MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usb_otg1_pads[] = {
- MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usb_otg2_pads[] = {
- MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-#define IOX_SDI IMX_GPIO_NR(1, 9)
-#define IOX_STCP IMX_GPIO_NR(1, 12)
-#define IOX_SHCP IMX_GPIO_NR(1, 13)
-
-static iomux_v3_cfg_t const iox_pads[] = {
- /* IOX_SDI */
- MX7D_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* IOX_STCP */
- MX7D_PAD_GPIO1_IO12__GPIO1_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* IOX_SHCP */
- MX7D_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-/*
- * PCIE_DIS_B --> Q0
- * PCIE_RST_B --> Q1
- * HDMI_RST_B --> Q2
- * PERI_RST_B --> Q3
- * SENSOR_RST_B --> Q4
- * ENET_RST_B --> Q5
- * PERI_3V3_EN --> Q6
- * LCD_PWR_EN --> Q7
- */
-enum qn {
- PCIE_DIS_B,
- PCIE_RST_B,
- HDMI_RST_B,
- PERI_RST_B,
- SENSOR_RST_B,
- ENET_RST_B,
- PERI_3V3_EN,
- LCD_PWR_EN,
-};
-
-enum qn_func {
- qn_reset,
- qn_enable,
- qn_disable,
-};
-
-enum qn_level {
- qn_low = 0,
- qn_high = 1,
-};
-
-static enum qn_level seq[3][2] = {
- {0, 1}, {1, 1}, {0, 0}
-};
-
-static enum qn_func qn_output[8] = {
- qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable,
- qn_disable
-};
-
-static void iox74lv_init(void)
-{
- int i;
-
- for (i = 7; i >= 0; i--) {
- gpio_direction_output(IOX_SHCP, 0);
- gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]);
- udelay(500);
- gpio_direction_output(IOX_SHCP, 1);
- udelay(500);
- }
-
- gpio_direction_output(IOX_STCP, 0);
- udelay(500);
- /*
- * shift register will be output to pins
- */
- gpio_direction_output(IOX_STCP, 1);
-
- for (i = 7; i >= 0; i--) {
- gpio_direction_output(IOX_SHCP, 0);
- gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
- udelay(500);
- gpio_direction_output(IOX_SHCP, 1);
- udelay(500);
- }
- gpio_direction_output(IOX_STCP, 0);
- udelay(500);
- /*
- * shift register will be output to pins
- */
- gpio_direction_output(IOX_STCP, 1);
-};
-
#ifdef CONFIG_NAND_MXS
static iomux_v3_cfg_t const gpmi_pads[] = {
MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads));
/* Reset LCD */
+ gpio_request(IMX_GPIO_NR(3, 4), "lcd reset");
gpio_direction_output(IMX_GPIO_NR(3, 4) , 0);
udelay(500);
gpio_direction_output(IMX_GPIO_NR(3, 4) , 1);
/* Set Brightness to high */
+ gpio_request(IMX_GPIO_NR(1, 1), "lcd backlight");
gpio_direction_output(IMX_GPIO_NR(1, 1) , 1);
return 0;
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
-#ifdef CONFIG_FSL_ESDHC
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0)
-#define USDHC1_PWR_GPIO IMX_GPIO_NR(5, 2)
-#define USDHC3_PWR_GPIO IMX_GPIO_NR(6, 11)
-
-static struct fsl_esdhc_cfg usdhc_cfg[3] = {
- {USDHC1_BASE_ADDR, 0, 4},
- {USDHC3_BASE_ADDR},
-};
-
int board_mmc_get_env_dev(int devno)
{
if (devno == 2)
return devno;
}
-static int mmc_map_to_kernel_blk(int dev_no)
+int mmc_map_to_kernel_blk(int dev_no)
{
if (dev_no == 1)
dev_no++;
return dev_no;
}
-int board_mmc_getcd(struct mmc *mmc)
+#ifdef CONFIG_FEC_MXC
+int board_eth_init(bd_t *bis)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- case USDHC3_BASE_ADDR:
- ret = 1; /* Assume uSDHC3 emmc is always present */
- break;
- }
-
- return ret;
-}
+ int ret;
+ unsigned int gpio;
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 USDHC1
- * mmc2 USDHC3 (eMMC)
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
- gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
- gpio_direction_input(USDHC1_CD_GPIO);
- gpio_request(USDHC1_PWR_GPIO, "usdhc1_pwr");
- gpio_direction_output(USDHC1_PWR_GPIO, 0);
- udelay(500);
- gpio_direction_output(USDHC1_PWR_GPIO, 1);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads));
- gpio_request(USDHC3_PWR_GPIO, "usdhc3_pwr");
- gpio_direction_output(USDHC3_PWR_GPIO, 0);
- udelay(500);
- gpio_direction_output(USDHC3_PWR_GPIO, 1);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) than supported by the board\n", i + 1);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret)
- return ret;
+ ret = gpio_lookup_name("gpio_spi@0_5", NULL, NULL, &gpio);
+ if (ret) {
+ printf("GPIO: 'gpio_spi@0_5' not found\n");
+ return -ENODEV;
}
- return 0;
-}
-
-static int check_mmc_autodetect(void)
-{
- char *autodetect_str = getenv("mmcautodetect");
-
- if ((autodetect_str != NULL) &&
- (strcmp(autodetect_str, "yes") == 0)) {
- return 1;
+ ret = gpio_request(gpio, "fec_rst");
+ if (ret && ret != -EBUSY) {
+ printf("gpio: requesting pin %u failed\n", gpio);
+ return ret;
}
- return 0;
-}
-
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- if (!check_mmc_autodetect())
- return;
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
- mmc_map_to_kernel_blk(dev_no));
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
-
-#endif
-
-#ifdef CONFIG_FEC_MXC
-int board_eth_init(bd_t *bis)
-{
- int ret;
+ gpio_direction_output(gpio, 0);
+ udelay(500);
+ gpio_direction_output(gpio, 1);
setup_iomux_fec();
{
setup_iomux_uart();
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
- imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
- ARRAY_SIZE(usb_otg1_pads));
- imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
- ARRAY_SIZE(usb_otg2_pads));
-
return 0;
}
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- imx_iomux_v3_setup_multiple_pads(iox_pads, ARRAY_SIZE(iox_pads));
-
- iox74lv_init();
-
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
return 0;
}
-#ifdef CONFIG_POWER
-#define I2C_PMIC 0
+#ifdef CONFIG_DM_PMIC
int power_init_board(void)
{
- struct pmic *p;
- int ret;
- unsigned int reg, rev_id;
+ struct udevice *dev;
+ int ret, dev_id, rev_id;
- ret = power_pfuze3000_init(I2C_PMIC);
- if (ret)
- return ret;
-
- p = pmic_get("PFUZE3000");
- ret = pmic_probe(p);
- if (ret)
+ ret = pmic_get("pfuze3000", &dev);
+ if (ret == -ENODEV)
+ return 0;
+ if (ret != 0)
return ret;
- pmic_reg_read(p, PFUZE3000_DEVICEID, ®);
- pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
- printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+ dev_id = pmic_reg_read(dev, PFUZE3000_DEVICEID);
+ rev_id = pmic_reg_read(dev, PFUZE3000_REVID);
+ printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
- /* disable Low Power Mode during standby mode */
- pmic_reg_write(p, PFUZE3000_LDOGCTL, 0x1);
+ pmic_clrsetbits(dev, PFUZE3000_LDOGCTL, 0, 1);
return 0;
}
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-#ifdef CONFIG_ENV_IS_IN_MMC
- mmc_late_init();
-#endif
-
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
return 0;
}
-
-#ifdef CONFIG_USB_EHCI_MX7
-int board_usb_phy_mode(int port)
-{
- if (port == 0)
- return USB_INIT_DEVICE;
- else
- return USB_INIT_HOST;
-}
-#endif
}
#endif /* if defined(CONFIG_CMD_PCI) */
+void ft_board_wdog_fixup(void *blob, const char *path)
+{
+ ft_delprop_path(blob, path, "ext-reset-output");
+ ft_delprop_path(blob, path, "fsl,ext-reset-output");
+}
+
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
/* GW51xx-E adds WDOG1_B external reset */
if (rev < 'E')
- ft_delprop_path(blob, WDOG1_PATH,
- "fsl,ext-reset-output");
+ ft_board_wdog_fixup(blob, WDOG1_PATH);
break;
case GW52xx:
strstr((const char *)info->model, "SP331-B"))
gpio_cfg[board_type].usd_vsel = 0;
- /* GW520x-E adds WDOG1_B external reset */
- if (info->model[4] == '0' && rev < 'E')
- ft_delprop_path(blob, WDOG1_PATH,
- "fsl,ext-reset-output");
-
/* GW522x-B adds WDOG1_B external reset */
- if (info->model[4] == '2' && rev < 'B')
- ft_delprop_path(blob, WDOG1_PATH,
- "fsl,ext-reset-output");
+ ft_board_wdog_fixup(blob, WDOG1_PATH);
}
+
+ /* GW520x-E adds WDOG1_B external reset */
+ else if (info->model[4] == '0' && rev < 'E')
+ ft_board_wdog_fixup(blob, WDOG1_PATH);
break;
case GW53xx:
/* GW53xx-E adds WDOG1_B external reset */
if (rev < 'E')
- ft_delprop_path(blob, WDOG1_PATH,
- "fsl,ext-reset-output");
+ ft_board_wdog_fixup(blob, WDOG1_PATH);
break;
case GW54xx:
/* GW54xx-E adds WDOG2_B external reset */
if (rev < 'E')
- ft_delprop_path(blob, WDOG2_PATH,
- "fsl,ext-reset-output");
+ ft_board_wdog_fixup(blob, WDOG2_PATH);
break;
case GW551x:
/* GW551x-C adds WDOG1_B external reset */
if (rev < 'C')
- ft_delprop_path(blob, WDOG1_PATH,
- "fsl,ext-reset-output");
+ ft_board_wdog_fixup(blob, WDOG1_PATH);
break;
}
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_SPL=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_BLK is not set
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_DM_MMC_OPS is not set
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
-CONFIG_IMX_THERMAL=y
-CONFIG_VIDEO_IPUV3=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
-CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
-CONFIG_SPL=y
-CONFIG_SPL_DMA_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_UBI=y
-# CONFIG_BLK is not set
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_DM_MMC_OPS is not set
-CONFIG_NAND_MXS=y
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
-CONFIG_IMX_THERMAL=y
-CONFIG_VIDEO_IPUV3=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE_RQS=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore-rqs"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6dl-icore-rqs.dtb"
-CONFIG_SPL=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_BLK is not set
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_DM_MMC_OPS is not set
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6q-icore.dtb"
-CONFIG_SPL=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_BLK is not set
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_DM_MMC_OPS is not set
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
-CONFIG_IMX_THERMAL=y
-CONFIG_VIDEO_IPUV3=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
-CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6q-icore.dtb"
-CONFIG_SPL=y
-CONFIG_SPL_DMA_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_UBI=y
-# CONFIG_BLK is not set
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_DM_MMC_OPS is not set
-CONFIG_NAND_MXS=y
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
-CONFIG_IMX_THERMAL=y
-CONFIG_VIDEO_IPUV3=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE_RQS=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-rqs"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
-CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6q-icore-rqs.dtb"
-CONFIG_SPL=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_BLK is not set
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_DM_MMC_OPS is not set
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
+CONFIG_OF_LIST="imx6q-icore imx6dl-icore"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
+CONFIG_BOOTDELAY=3
+CONFIG_SPL=y
+CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="icorem6qdl> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+# CONFIG_BLK is not set
+CONFIG_SYS_I2C_MXC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
+CONFIG_VIDEO_IPUV3=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_MX6Q_ICORE_RQS=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-rqs"
+CONFIG_OF_LIST="imx6q-icore-rqs imx6dl-icore-rqs"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
+CONFIG_BOOTDELAY=3
+CONFIG_SPL=y
+CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+# CONFIG_BLK is not set
+CONFIG_SYS_I2C_MXC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_MXC_UART=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6ul-geam-kit.dtb"
CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6ul-geam-kit.dtb"
CONFIG_SPL=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6ul-isiot-emmc.dtb"
CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6ul-isiot-emmc.dtb"
CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
CONFIG_BOOTDELAY=3
-CONFIG_DEFAULT_FDT_FILE="imx6ul-isiot-nand.dtb"
CONFIG_SPL=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_HUSH_PARSER=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6SABRESD=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PCI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6SABRESD=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PCI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_IMX_BOOTAUX=y
# CONFIG_CMD_BMODE is not set
CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_74X164=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SPI=y
+CONFIG_SOFT_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_STORAGE=y
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-CONFIG_OF_LIBFDT=y
+CONFIG_ERRNO_STR=y
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_TARGET_MX7DSABRESD=y
+CONFIG_VIDEO=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+# CONFIG_ARMV7_VIRT is not set
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
# CONFIG_CMD_BMODE is not set
-CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_74X164=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SPI=y
+CONFIG_SOFT_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_STORAGE=y
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-CONFIG_OF_LIBFDT=y
+CONFIG_ERRNO_STR=y
ret = gpio_request_by_name(dev, "oe-gpios", 0, &priv->oe,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret) {
- dev_err(dev, "No oe-pins property\n");
- goto free_buf;
+ dev_dbg(dev, "No oe-pins property\n");
}
uc_priv->bank_name = str;
writel(0x00000000, &fec->eth->gaddr2);
/* Do not access reserved register for i.MX6UL */
- if (!is_mx6ul()) {
+ if (!is_mx6ul() && !is_mx6ull()) {
/* clear MIB RAM */
for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
writel(0, i);
struct eth_device *edev;
struct fec_priv *fec;
unsigned char ethaddr[6];
+ char mac[16];
uint32_t start;
int ret = 0;
fec->phy_id = phy_id;
#endif
eth_register(edev);
+ /* only support one eth device, the index number pointed by dev_id */
+ edev->index = fec->dev_id;
- if (fec_get_hwaddr(dev_id, ethaddr) == 0) {
- debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
+ if (fec_get_hwaddr(fec->dev_id, ethaddr) == 0) {
+ debug("got MAC%d address from fuse: %pM\n", fec->dev_id, ethaddr);
memcpy(edev->enetaddr, ethaddr, 6);
- if (!getenv("ethaddr"))
- eth_setenv_enetaddr("ethaddr", ethaddr);
+ if (fec->dev_id)
+ sprintf(mac, "eth%daddr", fec->dev_id);
+ else
+ strcpy(mac, "ethaddr");
+ if (!getenv(mac))
+ eth_setenv_enetaddr(mac, ethaddr);
}
return ret;
err4:
if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
pin_data, size >> 2)) {
dev_err(dev, "Error reading pin data.\n");
+ devm_kfree(dev, pin_data);
return -EINVAL;
}
if ((mux_reg == -1) || (conf_reg == -1)) {
dev_err(dev, "Error mux_reg or conf_reg\n");
+ devm_kfree(dev, pin_data);
return -EINVAL;
}
}
}
+ devm_kfree(dev, pin_data);
+
return 0;
}
endif # if DM_SPI
+config SOFT_SPI
+ bool "Soft SPI driver"
+ help
+ Enable Soft SPI driver. This driver is to use GPIO simulate
+ the SPI protocol.
+
config FSL_ESPI
bool "Freescale eSPI driver"
help
#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#include <linux/math64.h>
#include <thermal.h>
#include <imx_thermal.h>
/* board will busyloop until this many degrees C below CPU max temperature */
#define TEMPERATURE_HOT_DELTA 5 /* CPU maxT - 5C */
#define FACTOR0 10000000
-#define FACTOR1 15976
-#define FACTOR2 4297157
+#define FACTOR1 15423
+#define FACTOR2 4148468
+#define OFFSET 3580661
#define MEASURE_FREQ 327
#define TEMPERATURE_MIN -40
#define TEMPERATURE_HOT 85
struct thermal_data *priv = dev_get_priv(dev);
u32 fuse = priv->fuse;
int t1, n1;
- u32 c1, c2;
- u64 temp64;
+ s64 c1, c2;
+ s64 temp64;
+ s32 rem;
/*
* Sensor data layout:
* [31:20] - sensor value @ 25C
* We use universal formula now and only need sensor value @ 25C
- * slope = 0.4297157 - (0.0015976 * 25C fuse)
+ * slope = 0.4445388 - (0.0016549 * 25C fuse)
*/
n1 = fuse >> 20;
t1 = 25; /* t1 always 25C */
/*
* Derived from linear interpolation:
- * slope = 0.4297157 - (0.0015976 * 25C fuse)
+ * slope = 0.4445388 - (0.0016549 * 25C fuse)
* slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
- * (Nmeas - n1) / (Tmeas - t1) = slope
+ * offset = 3.580661
+ * offset = OFFSET / 1000000
+ * (Nmeas - n1) / (Tmeas - t1 - offset) = slope
* We want to reduce this down to the minimum computation necessary
* for each temperature read. Also, we want Tmeas in millicelsius
* and we don't want to lose precision from integer division. So...
- * Tmeas = (Nmeas - n1) / slope + t1
- * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1
- * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1
- * Let constant c1 = (-1000 / slope)
- * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1
- * Let constant c2 = n1 *c1 + 1000 * t1
- * milli_Tmeas = c2 - Nmeas * c1
+ * Tmeas = (Nmeas - n1) / slope + t1 + offset
+ * milli_Tmeas = 1000000 * (Nmeas - n1) / slope + 1000000 * t1 + OFFSET
+ * milli_Tmeas = -1000000 * (n1 - Nmeas) / slope + 1000000 * t1 + OFFSET
+ * Let constant c1 = (-1000000 / slope)
+ * milli_Tmeas = (n1 - Nmeas) * c1 + 1000000 * t1 + OFFSET
+ * Let constant c2 = n1 *c1 + 1000000 * t1
+ * milli_Tmeas = (c2 - Nmeas * c1) + OFFSET
+ * Tmeas = ((c2 - Nmeas * c1) + OFFSET) / 1000000
*/
temp64 = FACTOR0;
- temp64 *= 1000;
- do_div(temp64, FACTOR1 * n1 - FACTOR2);
+ temp64 *= 1000000;
+ temp64 = div_s64_rem(temp64, FACTOR1 * n1 - FACTOR2, &rem);
c1 = temp64;
- c2 = n1 * c1 + 1000 * t1;
+ c2 = n1 * c1 + 1000000 * t1;
/*
* now we only use single measure, every time we read
>> TEMPSENSE0_TEMP_CNT_SHIFT;
writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
- /* milli_Tmeas = c2 - Nmeas * c1 */
- temperature = (long)(c2 - n_meas * c1)/1000;
+ /* Tmeas = (c2 - Nmeas * c1 + OFFSET) / 1000000 */
+ temperature = div_s64_rem(c2 - n_meas * c1 + OFFSET, 1000000, &rem);
/* power down anatop thermal sensor */
writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
"fit_image=fit.itb\0" \
"console=ttymxc3\0" \
"fdt_high=0xffffffff\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
- "mmcdev=0\0" \
"mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"fitboot=echo Booting FIT image from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
- "mmcboot=echo Booting from mmc ...; " \
+ "_mmcboot=run mmcargs; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"else " \
"bootm; " \
"fi\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadfit; then " \
+ "run fitboot; " \
+ "else " \
+ "if run loadimage; then " \
+ "run _mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi\0" \
"nandboot=echo Booting from nand ...; " \
"if mtdparts; then " \
"echo Starting nand boot ...; " \
"nand read ${fdt_addr} dtb 0x100000; " \
"bootm ${loadaddr} - ${fdt_addr}\0"
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_BOOTCOMMAND "run nandboot"
-#else
-# define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi"
-#endif
+#define CONFIG_BOOTCOMMAND "run $modeboot"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
"fit_image=fit.itb\0" \
"console=ttymxc3\0" \
"fdt_high=0xffffffff\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"fit_image=fit.itb\0" \
"console=ttymxc0\0" \
"fdt_high=0xffffffff\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x87800000\0" \
"boot_fdt=try\0" \
- "mmcdev=0\0" \
"mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"fitboot=echo Booting FIT image from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
- "mmcboot=echo Booting from mmc ...; " \
+ "_mmcboot=run mmcargs; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"else " \
"bootm; " \
"fi\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadfit; then " \
+ "run fitboot; " \
+ "else " \
+ "if run loadimage; then " \
+ "run _mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi\0" \
"nandboot=echo Booting from nand ...; " \
"if mtdparts; then " \
"echo Starting nand boot ...; " \
"nand read ${fdt_addr} dtb 0x100000; " \
"bootm ${loadaddr} - ${fdt_addr}\0"
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_BOOTCOMMAND "run nandboot"
-#else
-# define CONFIG_BOOTCOMMAND \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi"
-#endif
+#define CONFIG_BOOTCOMMAND "run $modeboot"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
"splashpos=m,m\0" \
"console=ttymxc0\0" \
"fdt_high=0xffffffff\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x87800000\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
/* RTC */
#define CONFIG_RTC_IMXDI
+/* Fuse API support */
+#define CONFIG_FSL_IIM
+#define CONFIG_CMD_FUSE
+
/* Ethernet Configs */
/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE3000
-#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
-
#undef CONFIG_BOOTM_NETBSD
#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS
/* I2C configs */
-#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_IS_IN_MMC
-/* MXC SPI driver support */
-#define CONFIG_MXC_SPI
-
/*
* If want to use nand, define CONFIG_NAND_MXS and rework board
* to support nand, since emmc has pin conflicts with nand
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX7D_H
+#define __DT_BINDINGS_CLOCK_IMX7D_H
+
+#define IMX7D_OSC_24M_CLK 0
+#define IMX7D_PLL_ARM_MAIN 1
+#define IMX7D_PLL_ARM_MAIN_CLK 2
+#define IMX7D_PLL_ARM_MAIN_SRC 3
+#define IMX7D_PLL_ARM_MAIN_BYPASS 4
+#define IMX7D_PLL_SYS_MAIN 5
+#define IMX7D_PLL_SYS_MAIN_CLK 6
+#define IMX7D_PLL_SYS_MAIN_SRC 7
+#define IMX7D_PLL_SYS_MAIN_BYPASS 8
+#define IMX7D_PLL_SYS_MAIN_480M 9
+#define IMX7D_PLL_SYS_MAIN_240M 10
+#define IMX7D_PLL_SYS_MAIN_120M 11
+#define IMX7D_PLL_SYS_MAIN_480M_CLK 12
+#define IMX7D_PLL_SYS_MAIN_240M_CLK 13
+#define IMX7D_PLL_SYS_MAIN_120M_CLK 14
+#define IMX7D_PLL_SYS_PFD0_392M_CLK 15
+#define IMX7D_PLL_SYS_PFD0_196M 16
+#define IMX7D_PLL_SYS_PFD0_196M_CLK 17
+#define IMX7D_PLL_SYS_PFD1_332M_CLK 18
+#define IMX7D_PLL_SYS_PFD1_166M 19
+#define IMX7D_PLL_SYS_PFD1_166M_CLK 20
+#define IMX7D_PLL_SYS_PFD2_270M_CLK 21
+#define IMX7D_PLL_SYS_PFD2_135M 22
+#define IMX7D_PLL_SYS_PFD2_135M_CLK 23
+#define IMX7D_PLL_SYS_PFD3_CLK 24
+#define IMX7D_PLL_SYS_PFD4_CLK 25
+#define IMX7D_PLL_SYS_PFD5_CLK 26
+#define IMX7D_PLL_SYS_PFD6_CLK 27
+#define IMX7D_PLL_SYS_PFD7_CLK 28
+#define IMX7D_PLL_ENET_MAIN 29
+#define IMX7D_PLL_ENET_MAIN_CLK 30
+#define IMX7D_PLL_ENET_MAIN_SRC 31
+#define IMX7D_PLL_ENET_MAIN_BYPASS 32
+#define IMX7D_PLL_ENET_MAIN_500M 33
+#define IMX7D_PLL_ENET_MAIN_250M 34
+#define IMX7D_PLL_ENET_MAIN_125M 35
+#define IMX7D_PLL_ENET_MAIN_100M 36
+#define IMX7D_PLL_ENET_MAIN_50M 37
+#define IMX7D_PLL_ENET_MAIN_40M 38
+#define IMX7D_PLL_ENET_MAIN_25M 39
+#define IMX7D_PLL_ENET_MAIN_500M_CLK 40
+#define IMX7D_PLL_ENET_MAIN_250M_CLK 41
+#define IMX7D_PLL_ENET_MAIN_125M_CLK 42
+#define IMX7D_PLL_ENET_MAIN_100M_CLK 43
+#define IMX7D_PLL_ENET_MAIN_50M_CLK 44
+#define IMX7D_PLL_ENET_MAIN_40M_CLK 45
+#define IMX7D_PLL_ENET_MAIN_25M_CLK 46
+#define IMX7D_PLL_DRAM_MAIN 47
+#define IMX7D_PLL_DRAM_MAIN_CLK 48
+#define IMX7D_PLL_DRAM_MAIN_SRC 49
+#define IMX7D_PLL_DRAM_MAIN_BYPASS 50
+#define IMX7D_PLL_DRAM_MAIN_533M 51
+#define IMX7D_PLL_DRAM_MAIN_533M_CLK 52
+#define IMX7D_PLL_AUDIO_MAIN 53
+#define IMX7D_PLL_AUDIO_MAIN_CLK 54
+#define IMX7D_PLL_AUDIO_MAIN_SRC 55
+#define IMX7D_PLL_AUDIO_MAIN_BYPASS 56
+#define IMX7D_PLL_VIDEO_MAIN_CLK 57
+#define IMX7D_PLL_VIDEO_MAIN 58
+#define IMX7D_PLL_VIDEO_MAIN_SRC 59
+#define IMX7D_PLL_VIDEO_MAIN_BYPASS 60
+#define IMX7D_USB_MAIN_480M_CLK 61
+#define IMX7D_ARM_A7_ROOT_CLK 62
+#define IMX7D_ARM_A7_ROOT_SRC 63
+#define IMX7D_ARM_A7_ROOT_CG 64
+#define IMX7D_ARM_A7_ROOT_DIV 65
+#define IMX7D_ARM_M4_ROOT_CLK 66
+#define IMX7D_ARM_M4_ROOT_SRC 67
+#define IMX7D_ARM_M4_ROOT_CG 68
+#define IMX7D_ARM_M4_ROOT_DIV 69
+#define IMX7D_ARM_M0_ROOT_CLK 70
+#define IMX7D_ARM_M0_ROOT_SRC 71
+#define IMX7D_ARM_M0_ROOT_CG 72
+#define IMX7D_ARM_M0_ROOT_DIV 73
+#define IMX7D_MAIN_AXI_ROOT_CLK 74
+#define IMX7D_MAIN_AXI_ROOT_SRC 75
+#define IMX7D_MAIN_AXI_ROOT_CG 76
+#define IMX7D_MAIN_AXI_ROOT_DIV 77
+#define IMX7D_DISP_AXI_ROOT_CLK 78
+#define IMX7D_DISP_AXI_ROOT_SRC 79
+#define IMX7D_DISP_AXI_ROOT_CG 80
+#define IMX7D_DISP_AXI_ROOT_DIV 81
+#define IMX7D_ENET_AXI_ROOT_CLK 82
+#define IMX7D_ENET_AXI_ROOT_SRC 83
+#define IMX7D_ENET_AXI_ROOT_CG 84
+#define IMX7D_ENET_AXI_ROOT_DIV 85
+#define IMX7D_NAND_USDHC_BUS_ROOT_CLK 86
+#define IMX7D_NAND_USDHC_BUS_ROOT_SRC 87
+#define IMX7D_NAND_USDHC_BUS_ROOT_CG 88
+#define IMX7D_NAND_USDHC_BUS_ROOT_DIV 89
+#define IMX7D_AHB_CHANNEL_ROOT_CLK 90
+#define IMX7D_AHB_CHANNEL_ROOT_SRC 91
+#define IMX7D_AHB_CHANNEL_ROOT_CG 92
+#define IMX7D_AHB_CHANNEL_ROOT_DIV 93
+#define IMX7D_DRAM_PHYM_ROOT_CLK 94
+#define IMX7D_DRAM_PHYM_ROOT_SRC 95
+#define IMX7D_DRAM_PHYM_ROOT_CG 96
+#define IMX7D_DRAM_PHYM_ROOT_DIV 97
+#define IMX7D_DRAM_ROOT_CLK 98
+#define IMX7D_DRAM_ROOT_SRC 99
+#define IMX7D_DRAM_ROOT_CG 100
+#define IMX7D_DRAM_ROOT_DIV 101
+#define IMX7D_DRAM_PHYM_ALT_ROOT_CLK 102
+#define IMX7D_DRAM_PHYM_ALT_ROOT_SRC 103
+#define IMX7D_DRAM_PHYM_ALT_ROOT_CG 104
+#define IMX7D_DRAM_PHYM_ALT_ROOT_DIV 105
+#define IMX7D_DRAM_ALT_ROOT_CLK 106
+#define IMX7D_DRAM_ALT_ROOT_SRC 107
+#define IMX7D_DRAM_ALT_ROOT_CG 108
+#define IMX7D_DRAM_ALT_ROOT_DIV 109
+#define IMX7D_USB_HSIC_ROOT_CLK 110
+#define IMX7D_USB_HSIC_ROOT_SRC 111
+#define IMX7D_USB_HSIC_ROOT_CG 112
+#define IMX7D_USB_HSIC_ROOT_DIV 113
+#define IMX7D_PCIE_CTRL_ROOT_CLK 114
+#define IMX7D_PCIE_CTRL_ROOT_SRC 115
+#define IMX7D_PCIE_CTRL_ROOT_CG 116
+#define IMX7D_PCIE_CTRL_ROOT_DIV 117
+#define IMX7D_PCIE_PHY_ROOT_CLK 118
+#define IMX7D_PCIE_PHY_ROOT_SRC 119
+#define IMX7D_PCIE_PHY_ROOT_CG 120
+#define IMX7D_PCIE_PHY_ROOT_DIV 121
+#define IMX7D_EPDC_PIXEL_ROOT_CLK 122
+#define IMX7D_EPDC_PIXEL_ROOT_SRC 123
+#define IMX7D_EPDC_PIXEL_ROOT_CG 124
+#define IMX7D_EPDC_PIXEL_ROOT_DIV 125
+#define IMX7D_LCDIF_PIXEL_ROOT_CLK 126
+#define IMX7D_LCDIF_PIXEL_ROOT_SRC 127
+#define IMX7D_LCDIF_PIXEL_ROOT_CG 128
+#define IMX7D_LCDIF_PIXEL_ROOT_DIV 129
+#define IMX7D_MIPI_DSI_ROOT_CLK 130
+#define IMX7D_MIPI_DSI_ROOT_SRC 131
+#define IMX7D_MIPI_DSI_ROOT_CG 132
+#define IMX7D_MIPI_DSI_ROOT_DIV 133
+#define IMX7D_MIPI_CSI_ROOT_CLK 134
+#define IMX7D_MIPI_CSI_ROOT_SRC 135
+#define IMX7D_MIPI_CSI_ROOT_CG 136
+#define IMX7D_MIPI_CSI_ROOT_DIV 137
+#define IMX7D_MIPI_DPHY_ROOT_CLK 138
+#define IMX7D_MIPI_DPHY_ROOT_SRC 139
+#define IMX7D_MIPI_DPHY_ROOT_CG 140
+#define IMX7D_MIPI_DPHY_ROOT_DIV 141
+#define IMX7D_SAI1_ROOT_CLK 142
+#define IMX7D_SAI1_ROOT_SRC 143
+#define IMX7D_SAI1_ROOT_CG 144
+#define IMX7D_SAI1_ROOT_DIV 145
+#define IMX7D_SAI2_ROOT_CLK 146
+#define IMX7D_SAI2_ROOT_SRC 147
+#define IMX7D_SAI2_ROOT_CG 148
+#define IMX7D_SAI2_ROOT_DIV 149
+#define IMX7D_SAI3_ROOT_CLK 150
+#define IMX7D_SAI3_ROOT_SRC 151
+#define IMX7D_SAI3_ROOT_CG 152
+#define IMX7D_SAI3_ROOT_DIV 153
+#define IMX7D_SPDIF_ROOT_CLK 154
+#define IMX7D_SPDIF_ROOT_SRC 155
+#define IMX7D_SPDIF_ROOT_CG 156
+#define IMX7D_SPDIF_ROOT_DIV 157
+#define IMX7D_ENET1_REF_ROOT_CLK 158
+#define IMX7D_ENET1_REF_ROOT_SRC 159
+#define IMX7D_ENET1_REF_ROOT_CG 160
+#define IMX7D_ENET1_REF_ROOT_DIV 161
+#define IMX7D_ENET1_TIME_ROOT_CLK 162
+#define IMX7D_ENET1_TIME_ROOT_SRC 163
+#define IMX7D_ENET1_TIME_ROOT_CG 164
+#define IMX7D_ENET1_TIME_ROOT_DIV 165
+#define IMX7D_ENET2_REF_ROOT_CLK 166
+#define IMX7D_ENET2_REF_ROOT_SRC 167
+#define IMX7D_ENET2_REF_ROOT_CG 168
+#define IMX7D_ENET2_REF_ROOT_DIV 169
+#define IMX7D_ENET2_TIME_ROOT_CLK 170
+#define IMX7D_ENET2_TIME_ROOT_SRC 171
+#define IMX7D_ENET2_TIME_ROOT_CG 172
+#define IMX7D_ENET2_TIME_ROOT_DIV 173
+#define IMX7D_ENET_PHY_REF_ROOT_CLK 174
+#define IMX7D_ENET_PHY_REF_ROOT_SRC 175
+#define IMX7D_ENET_PHY_REF_ROOT_CG 176
+#define IMX7D_ENET_PHY_REF_ROOT_DIV 177
+#define IMX7D_EIM_ROOT_CLK 178
+#define IMX7D_EIM_ROOT_SRC 179
+#define IMX7D_EIM_ROOT_CG 180
+#define IMX7D_EIM_ROOT_DIV 181
+#define IMX7D_NAND_ROOT_CLK 182
+#define IMX7D_NAND_ROOT_SRC 183
+#define IMX7D_NAND_ROOT_CG 184
+#define IMX7D_NAND_ROOT_DIV 185
+#define IMX7D_QSPI_ROOT_CLK 186
+#define IMX7D_QSPI_ROOT_SRC 187
+#define IMX7D_QSPI_ROOT_CG 188
+#define IMX7D_QSPI_ROOT_DIV 189
+#define IMX7D_USDHC1_ROOT_CLK 190
+#define IMX7D_USDHC1_ROOT_SRC 191
+#define IMX7D_USDHC1_ROOT_CG 192
+#define IMX7D_USDHC1_ROOT_DIV 193
+#define IMX7D_USDHC2_ROOT_CLK 194
+#define IMX7D_USDHC2_ROOT_SRC 195
+#define IMX7D_USDHC2_ROOT_CG 196
+#define IMX7D_USDHC2_ROOT_DIV 197
+#define IMX7D_USDHC3_ROOT_CLK 198
+#define IMX7D_USDHC3_ROOT_SRC 199
+#define IMX7D_USDHC3_ROOT_CG 200
+#define IMX7D_USDHC3_ROOT_DIV 201
+#define IMX7D_CAN1_ROOT_CLK 202
+#define IMX7D_CAN1_ROOT_SRC 203
+#define IMX7D_CAN1_ROOT_CG 204
+#define IMX7D_CAN1_ROOT_DIV 205
+#define IMX7D_CAN2_ROOT_CLK 206
+#define IMX7D_CAN2_ROOT_SRC 207
+#define IMX7D_CAN2_ROOT_CG 208
+#define IMX7D_CAN2_ROOT_DIV 209
+#define IMX7D_I2C1_ROOT_CLK 210
+#define IMX7D_I2C1_ROOT_SRC 211
+#define IMX7D_I2C1_ROOT_CG 212
+#define IMX7D_I2C1_ROOT_DIV 213
+#define IMX7D_I2C2_ROOT_CLK 214
+#define IMX7D_I2C2_ROOT_SRC 215
+#define IMX7D_I2C2_ROOT_CG 216
+#define IMX7D_I2C2_ROOT_DIV 217
+#define IMX7D_I2C3_ROOT_CLK 218
+#define IMX7D_I2C3_ROOT_SRC 219
+#define IMX7D_I2C3_ROOT_CG 220
+#define IMX7D_I2C3_ROOT_DIV 221
+#define IMX7D_I2C4_ROOT_CLK 222
+#define IMX7D_I2C4_ROOT_SRC 223
+#define IMX7D_I2C4_ROOT_CG 224
+#define IMX7D_I2C4_ROOT_DIV 225
+#define IMX7D_UART1_ROOT_CLK 226
+#define IMX7D_UART1_ROOT_SRC 227
+#define IMX7D_UART1_ROOT_CG 228
+#define IMX7D_UART1_ROOT_DIV 229
+#define IMX7D_UART2_ROOT_CLK 230
+#define IMX7D_UART2_ROOT_SRC 231
+#define IMX7D_UART2_ROOT_CG 232
+#define IMX7D_UART2_ROOT_DIV 233
+#define IMX7D_UART3_ROOT_CLK 234
+#define IMX7D_UART3_ROOT_SRC 235
+#define IMX7D_UART3_ROOT_CG 236
+#define IMX7D_UART3_ROOT_DIV 237
+#define IMX7D_UART4_ROOT_CLK 238
+#define IMX7D_UART4_ROOT_SRC 239
+#define IMX7D_UART4_ROOT_CG 240
+#define IMX7D_UART4_ROOT_DIV 241
+#define IMX7D_UART5_ROOT_CLK 242
+#define IMX7D_UART5_ROOT_SRC 243
+#define IMX7D_UART5_ROOT_CG 244
+#define IMX7D_UART5_ROOT_DIV 245
+#define IMX7D_UART6_ROOT_CLK 246
+#define IMX7D_UART6_ROOT_SRC 247
+#define IMX7D_UART6_ROOT_CG 248
+#define IMX7D_UART6_ROOT_DIV 249
+#define IMX7D_UART7_ROOT_CLK 250
+#define IMX7D_UART7_ROOT_SRC 251
+#define IMX7D_UART7_ROOT_CG 252
+#define IMX7D_UART7_ROOT_DIV 253
+#define IMX7D_ECSPI1_ROOT_CLK 254
+#define IMX7D_ECSPI1_ROOT_SRC 255
+#define IMX7D_ECSPI1_ROOT_CG 256
+#define IMX7D_ECSPI1_ROOT_DIV 257
+#define IMX7D_ECSPI2_ROOT_CLK 258
+#define IMX7D_ECSPI2_ROOT_SRC 259
+#define IMX7D_ECSPI2_ROOT_CG 260
+#define IMX7D_ECSPI2_ROOT_DIV 261
+#define IMX7D_ECSPI3_ROOT_CLK 262
+#define IMX7D_ECSPI3_ROOT_SRC 263
+#define IMX7D_ECSPI3_ROOT_CG 264
+#define IMX7D_ECSPI3_ROOT_DIV 265
+#define IMX7D_ECSPI4_ROOT_CLK 266
+#define IMX7D_ECSPI4_ROOT_SRC 267
+#define IMX7D_ECSPI4_ROOT_CG 268
+#define IMX7D_ECSPI4_ROOT_DIV 269
+#define IMX7D_PWM1_ROOT_CLK 270
+#define IMX7D_PWM1_ROOT_SRC 271
+#define IMX7D_PWM1_ROOT_CG 272
+#define IMX7D_PWM1_ROOT_DIV 273
+#define IMX7D_PWM2_ROOT_CLK 274
+#define IMX7D_PWM2_ROOT_SRC 275
+#define IMX7D_PWM2_ROOT_CG 276
+#define IMX7D_PWM2_ROOT_DIV 277
+#define IMX7D_PWM3_ROOT_CLK 278
+#define IMX7D_PWM3_ROOT_SRC 279
+#define IMX7D_PWM3_ROOT_CG 280
+#define IMX7D_PWM3_ROOT_DIV 281
+#define IMX7D_PWM4_ROOT_CLK 282
+#define IMX7D_PWM4_ROOT_SRC 283
+#define IMX7D_PWM4_ROOT_CG 284
+#define IMX7D_PWM4_ROOT_DIV 285
+#define IMX7D_FLEXTIMER1_ROOT_CLK 286
+#define IMX7D_FLEXTIMER1_ROOT_SRC 287
+#define IMX7D_FLEXTIMER1_ROOT_CG 288
+#define IMX7D_FLEXTIMER1_ROOT_DIV 289
+#define IMX7D_FLEXTIMER2_ROOT_CLK 290
+#define IMX7D_FLEXTIMER2_ROOT_SRC 291
+#define IMX7D_FLEXTIMER2_ROOT_CG 292
+#define IMX7D_FLEXTIMER2_ROOT_DIV 293
+#define IMX7D_SIM1_ROOT_CLK 294
+#define IMX7D_SIM1_ROOT_SRC 295
+#define IMX7D_SIM1_ROOT_CG 296
+#define IMX7D_SIM1_ROOT_DIV 297
+#define IMX7D_SIM2_ROOT_CLK 298
+#define IMX7D_SIM2_ROOT_SRC 299
+#define IMX7D_SIM2_ROOT_CG 300
+#define IMX7D_SIM2_ROOT_DIV 301
+#define IMX7D_GPT1_ROOT_CLK 302
+#define IMX7D_GPT1_ROOT_SRC 303
+#define IMX7D_GPT1_ROOT_CG 304
+#define IMX7D_GPT1_ROOT_DIV 305
+#define IMX7D_GPT2_ROOT_CLK 306
+#define IMX7D_GPT2_ROOT_SRC 307
+#define IMX7D_GPT2_ROOT_CG 308
+#define IMX7D_GPT2_ROOT_DIV 309
+#define IMX7D_GPT3_ROOT_CLK 310
+#define IMX7D_GPT3_ROOT_SRC 311
+#define IMX7D_GPT3_ROOT_CG 312
+#define IMX7D_GPT3_ROOT_DIV 313
+#define IMX7D_GPT4_ROOT_CLK 314
+#define IMX7D_GPT4_ROOT_SRC 315
+#define IMX7D_GPT4_ROOT_CG 316
+#define IMX7D_GPT4_ROOT_DIV 317
+#define IMX7D_TRACE_ROOT_CLK 318
+#define IMX7D_TRACE_ROOT_SRC 319
+#define IMX7D_TRACE_ROOT_CG 320
+#define IMX7D_TRACE_ROOT_DIV 321
+#define IMX7D_WDOG1_ROOT_CLK 322
+#define IMX7D_WDOG_ROOT_SRC 323
+#define IMX7D_WDOG_ROOT_CG 324
+#define IMX7D_WDOG_ROOT_DIV 325
+#define IMX7D_CSI_MCLK_ROOT_CLK 326
+#define IMX7D_CSI_MCLK_ROOT_SRC 327
+#define IMX7D_CSI_MCLK_ROOT_CG 328
+#define IMX7D_CSI_MCLK_ROOT_DIV 329
+#define IMX7D_AUDIO_MCLK_ROOT_CLK 330
+#define IMX7D_AUDIO_MCLK_ROOT_SRC 331
+#define IMX7D_AUDIO_MCLK_ROOT_CG 332
+#define IMX7D_AUDIO_MCLK_ROOT_DIV 333
+#define IMX7D_WRCLK_ROOT_CLK 334
+#define IMX7D_WRCLK_ROOT_SRC 335
+#define IMX7D_WRCLK_ROOT_CG 336
+#define IMX7D_WRCLK_ROOT_DIV 337
+#define IMX7D_CLKO1_ROOT_SRC 338
+#define IMX7D_CLKO1_ROOT_CG 339
+#define IMX7D_CLKO1_ROOT_DIV 340
+#define IMX7D_CLKO2_ROOT_SRC 341
+#define IMX7D_CLKO2_ROOT_CG 342
+#define IMX7D_CLKO2_ROOT_DIV 343
+#define IMX7D_MAIN_AXI_ROOT_PRE_DIV 344
+#define IMX7D_DISP_AXI_ROOT_PRE_DIV 345
+#define IMX7D_ENET_AXI_ROOT_PRE_DIV 346
+#define IMX7D_NAND_USDHC_BUS_ROOT_PRE_DIV 347
+#define IMX7D_AHB_CHANNEL_ROOT_PRE_DIV 348
+#define IMX7D_USB_HSIC_ROOT_PRE_DIV 349
+#define IMX7D_PCIE_CTRL_ROOT_PRE_DIV 350
+#define IMX7D_PCIE_PHY_ROOT_PRE_DIV 351
+#define IMX7D_EPDC_PIXEL_ROOT_PRE_DIV 352
+#define IMX7D_LCDIF_PIXEL_ROOT_PRE_DIV 353
+#define IMX7D_MIPI_DSI_ROOT_PRE_DIV 354
+#define IMX7D_MIPI_CSI_ROOT_PRE_DIV 355
+#define IMX7D_MIPI_DPHY_ROOT_PRE_DIV 356
+#define IMX7D_SAI1_ROOT_PRE_DIV 357
+#define IMX7D_SAI2_ROOT_PRE_DIV 358
+#define IMX7D_SAI3_ROOT_PRE_DIV 359
+#define IMX7D_SPDIF_ROOT_PRE_DIV 360
+#define IMX7D_ENET1_REF_ROOT_PRE_DIV 361
+#define IMX7D_ENET1_TIME_ROOT_PRE_DIV 362
+#define IMX7D_ENET2_REF_ROOT_PRE_DIV 363
+#define IMX7D_ENET2_TIME_ROOT_PRE_DIV 364
+#define IMX7D_ENET_PHY_REF_ROOT_PRE_DIV 365
+#define IMX7D_EIM_ROOT_PRE_DIV 366
+#define IMX7D_NAND_ROOT_PRE_DIV 367
+#define IMX7D_QSPI_ROOT_PRE_DIV 368
+#define IMX7D_USDHC1_ROOT_PRE_DIV 369
+#define IMX7D_USDHC2_ROOT_PRE_DIV 370
+#define IMX7D_USDHC3_ROOT_PRE_DIV 371
+#define IMX7D_CAN1_ROOT_PRE_DIV 372
+#define IMX7D_CAN2_ROOT_PRE_DIV 373
+#define IMX7D_I2C1_ROOT_PRE_DIV 374
+#define IMX7D_I2C2_ROOT_PRE_DIV 375
+#define IMX7D_I2C3_ROOT_PRE_DIV 376
+#define IMX7D_I2C4_ROOT_PRE_DIV 377
+#define IMX7D_UART1_ROOT_PRE_DIV 378
+#define IMX7D_UART2_ROOT_PRE_DIV 379
+#define IMX7D_UART3_ROOT_PRE_DIV 380
+#define IMX7D_UART4_ROOT_PRE_DIV 381
+#define IMX7D_UART5_ROOT_PRE_DIV 382
+#define IMX7D_UART6_ROOT_PRE_DIV 383
+#define IMX7D_UART7_ROOT_PRE_DIV 384
+#define IMX7D_ECSPI1_ROOT_PRE_DIV 385
+#define IMX7D_ECSPI2_ROOT_PRE_DIV 386
+#define IMX7D_ECSPI3_ROOT_PRE_DIV 387
+#define IMX7D_ECSPI4_ROOT_PRE_DIV 388
+#define IMX7D_PWM1_ROOT_PRE_DIV 389
+#define IMX7D_PWM2_ROOT_PRE_DIV 390
+#define IMX7D_PWM3_ROOT_PRE_DIV 391
+#define IMX7D_PWM4_ROOT_PRE_DIV 392
+#define IMX7D_FLEXTIMER1_ROOT_PRE_DIV 393
+#define IMX7D_FLEXTIMER2_ROOT_PRE_DIV 394
+#define IMX7D_SIM1_ROOT_PRE_DIV 395
+#define IMX7D_SIM2_ROOT_PRE_DIV 396
+#define IMX7D_GPT1_ROOT_PRE_DIV 397
+#define IMX7D_GPT2_ROOT_PRE_DIV 398
+#define IMX7D_GPT3_ROOT_PRE_DIV 399
+#define IMX7D_GPT4_ROOT_PRE_DIV 400
+#define IMX7D_TRACE_ROOT_PRE_DIV 401
+#define IMX7D_WDOG_ROOT_PRE_DIV 402
+#define IMX7D_CSI_MCLK_ROOT_PRE_DIV 403
+#define IMX7D_AUDIO_MCLK_ROOT_PRE_DIV 404
+#define IMX7D_WRCLK_ROOT_PRE_DIV 405
+#define IMX7D_CLKO1_ROOT_PRE_DIV 406
+#define IMX7D_CLKO2_ROOT_PRE_DIV 407
+#define IMX7D_DRAM_PHYM_ALT_ROOT_PRE_DIV 408
+#define IMX7D_DRAM_ALT_ROOT_PRE_DIV 409
+#define IMX7D_LVDS1_IN_CLK 410
+#define IMX7D_LVDS1_OUT_SEL 411
+#define IMX7D_LVDS1_OUT_CLK 412
+#define IMX7D_CLK_DUMMY 413
+#define IMX7D_GPT_3M_CLK 414
+#define IMX7D_OCRAM_CLK 415
+#define IMX7D_OCRAM_S_CLK 416
+#define IMX7D_WDOG2_ROOT_CLK 417
+#define IMX7D_WDOG3_ROOT_CLK 418
+#define IMX7D_WDOG4_ROOT_CLK 419
+#define IMX7D_SDMA_CORE_CLK 420
+#define IMX7D_USB1_MAIN_480M_CLK 421
+#define IMX7D_USB_CTRL_CLK 422
+#define IMX7D_USB_PHY1_CLK 423
+#define IMX7D_USB_PHY2_CLK 424
+#define IMX7D_IPG_ROOT_CLK 425
+#define IMX7D_SAI1_IPG_CLK 426
+#define IMX7D_SAI2_IPG_CLK 427
+#define IMX7D_SAI3_IPG_CLK 428
+#define IMX7D_PLL_AUDIO_TEST_DIV 429
+#define IMX7D_PLL_AUDIO_POST_DIV 430
+#define IMX7D_PLL_VIDEO_TEST_DIV 431
+#define IMX7D_PLL_VIDEO_POST_DIV 432
+#define IMX7D_MU_ROOT_CLK 433
+#define IMX7D_SEMA4_HS_ROOT_CLK 434
+#define IMX7D_PLL_DRAM_TEST_DIV 435
+#define IMX7D_ADC_ROOT_CLK 436
+#define IMX7D_CLK_ARM 437
+#define IMX7D_CKIL 438
+#define IMX7D_OCOTP_CLK 439
+#define IMX7D_CLK_END 440
+#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
projects / u-boot / commitdiff