]> git.sur5r.net Git - u-boot/commitdiff
da850evm: setup the NAND flash timings
authorBen Gardiner <bengardiner@nanometrics.ca>
Thu, 14 Oct 2010 21:26:22 +0000 (17:26 -0400)
committerWolfgang Denk <wd@denx.de>
Sun, 17 Oct 2010 18:14:47 +0000 (20:14 +0200)
The default NAND flash timings are very conservative. This patch assigns the
timings reccomended in the recent linux kernel patch [1] from Sekhar Nori. The
speedup, as reported in that patch, is 5.3x for reads.

[1] http://www.spinics.net/lists/arm-kernel/msg100278.html

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
board/davinci/da8xxevm/da850evm.c

index f84adb9b62bc64d517fd84c2651962111587de43..0eb9e29ea35e2a3b8347bdca391a4b304a41cdab 100644 (file)
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <i2c.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/emif_defs.h>
 #include <asm/io.h>
 #include "../common/misc.h"
 #include "common.h"
@@ -98,6 +99,23 @@ int board_init(void)
        irq_init();
 #endif
 
+
+#ifdef CONFIG_NAND_DAVINCI
+       /*
+        * NAND CS setup - cycle counts based on da850evm NAND timings in the
+        * Linux kernel @ 25MHz EMIFA
+        */
+       writel((DAVINCI_ABCR_WSETUP(0) |
+               DAVINCI_ABCR_WSTROBE(0) |
+               DAVINCI_ABCR_WHOLD(0) |
+               DAVINCI_ABCR_RSETUP(0) |
+               DAVINCI_ABCR_RSTROBE(1) |
+               DAVINCI_ABCR_RHOLD(0) |
+               DAVINCI_ABCR_TA(0) |
+               DAVINCI_ABCR_ASIZE_8BIT),
+              &davinci_emif_regs->ab2cr); /* CS3 */
+#endif
+
        /* arch number of the board */
        gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;