/* Booting Linux */
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
-#define CONFIG_BOOTCOMMAND "run bootcmd_net"
+#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Extra Environment */
+#define CONFIG_PREBOOT "run try_bootscript"
+#define CONFIG_HOSTNAME m28evk
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "consdev=ttyAMA0\0" \
+ "baudrate=115200\0" \
+ "bootdev=/dev/mmcblk0p2\0" \
+ "rootdev=/dev/mmcblk0p3\0" \
+ "netdev=eth0\0" \
+ "hostname=m28evk\0" \
+ "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
+ "kernel_addr_r=0x42000000\0" \
+ "videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \
+ "le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \
+ "vmode:0\0" \
"update_nand_full_filename=u-boot.nand\0" \
"update_nand_firmware_filename=u-boot.sb\0" \
"update_sd_firmware_filename=u-boot.sd\0" \
"if tftp ${update_nand_full_filename} ; then " \
"run update_nand_get_fcb_size ; " \
"nand scrub -y 0x0 ${filesize} ; " \
- "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
+ "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
"setexpr fw_sz ${fw_sz} + 1 ; " \
"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
"fi ; " \
+ "fi\0" \
+ "addcons=" \
+ "setenv bootargs ${bootargs} " \
+ "console=${consdev},${baudrate}\0" \
+ "addip=" \
+ "setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off\0" \
+ "addmisc=" \
+ "setenv bootargs ${bootargs} ${miscargs}\0" \
+ "adddfltmtd=" \
+ "if test \"x${mtdparts}\" == \"x\" ; then " \
+ "mtdparts default ; " \
+ "fi\0" \
+ "addmtd=" \
+ "run adddfltmtd ; " \
+ "setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addargs=run addcons addmtd addmisc\0" \
+ "mmcload=" \
+ "mmc rescan ; " \
+ "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
+ "ubiload=" \
+ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \
+ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
+ "netload=" \
+ "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
+ "miscargs=nohlt panic=1\0" \
+ "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
+ "ubiargs=" \
+ "setenv bootargs ubi.mtd=5 " \
+ "root=ubi0:rootfs rootfstype=ubifs\0" \
+ "nfsargs=" \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
+ "mmc_mmc=" \
+ "run mmcload mmcargs addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "mmc_ubi=" \
+ "run mmcload ubiargs addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "mmc_nfs=" \
+ "run mmcload nfsargs addip addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "ubi_mmc=" \
+ "run ubiload mmcargs addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "ubi_ubi=" \
+ "run ubiload ubiargs addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "ubi_nfs=" \
+ "run ubiload nfsargs addip addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "net_mmc=" \
+ "run netload mmcargs addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "net_ubi=" \
+ "run netload ubiargs addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "net_nfs=" \
+ "run netload nfsargs addip addargs ; " \
+ "bootm ${kernel_addr_r}\0" \
+ "try_bootscript=" \
+ "mmc rescan;" \
+ "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
+ "then;" \
+ "\techo Running bootscript...;" \
+ "\tsource ${kernel_addr_r};" \
"fi\0"
/* The rest of the configuration is shared */