arm: am57xx: Define Android partition table

"fastboot oem format" command reuses "gpt write" command, which in turn
requires correct partitions defined in $partitions variable. This patch
adds such definition of Android partitions for DRA7XX EVM board.

By default $partitions variable contains Linux partition table. In order
to prepare Android environment one can run next commands from U-Boot
shell:

    => env set partitions $partitions_android
    => env save

After those operations one can go to fastboot mode and perform
"fastboot oem format" to create Android partition table.

While at it, enable CONFIG_RANDOM_UUID to spare user from providing
UUIDs for each partition manually.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index d865f415bccd38045ace835850c4433156602d05..bcbe3cdc84d02670b2ecbbade4d459c04cb6889a 100644 (file)
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -38,14 +38,33 @@
 
 /* Define the default GPT table for eMMC */
 #define PARTS_DEFAULT \
+       /* Linux partitions */ \
        "uuid_disk=${uuid_gpt_disk};" \
-       "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+       "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+       /* Android partitions */ \
+       "partitions_android=" \
+       "uuid_disk=${uuid_gpt_disk};" \
+       "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
+       "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \
+       "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
+       "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
+       "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
+       "name=efs,size=16M,uuid=${uuid_gpt_efs};" \
+       "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
+       "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
+       "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
+       "name=system,size=768M,uuid=${uuid_gpt_system};" \
+       "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
+       "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
+       "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
+       "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
 
 #include <configs/ti_omap5_common.h>
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
 #define CONFIG_EFI_PARTITION
+#define CONFIG_RANDOM_UUID
 
 /* CPSW Ethernet */
 #define CONFIG_BOOTP_DNS               /* Configurable parts of CMD_DHCP */