]> git.sur5r.net Git - u-boot/commitdiff
fsl/ddr: updated ddr errata-A008378 for arm and power SoCs
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Fri, 20 Nov 2015 07:52:04 +0000 (15:52 +0800)
committerYork Sun <yorksun@freescale.com>
Mon, 14 Dec 2015 02:27:28 +0000 (18:27 -0800)
DDR errata-A008378 applies to LS1021-20-22A-R1.0, T1023-R1.0,
T1024-R1.0, T1040-42-20-22-R1.0/R1.1, it has been fixed on
LS102x Rev2.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
arch/powerpc/include/asm/config_mpc85xx.h
drivers/ddr/fsl/fsl_ddr_gen4.c
include/fsl_errata.h

index 7a5487be884006ae0a5508af4a3c64b1b2aa9536..674fac88286afb4e9ff48ca8e8bd14aa923a1fa5 100644 (file)
@@ -807,6 +807,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define MAX_QE_RISC                    1
 #define QE_NUM_OF_SNUM                 28
 #define CONFIG_SYS_FSL_SFP_VER_3_0
+#define CONFIG_SYS_FSL_ERRATUM_A008378
 
 #elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\
 defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
@@ -854,6 +855,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define MAX_QE_RISC                    1
 #define QE_NUM_OF_SNUM                 28
 #define CONFIG_SYS_FSL_SFP_VER_3_0
+#define CONFIG_SYS_FSL_ERRATUM_A008378
 
 #elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
 #define CONFIG_E6500
index 50f4671c8febfa7d64cda6d8f312b3c851dd6401..0755ff7c24a7fa733d90702c2660e72dee09b047 100644 (file)
@@ -10,6 +10,7 @@
 #include <asm/processor.h>
 #include <fsl_immap.h>
 #include <fsl_ddr.h>
+#include <fsl_errata.h>
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008511
 static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
@@ -238,9 +239,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        /* Erratum applies when accumulated ECC is used, or DBI is enabled */
 #define IS_ACC_ECC_EN(v) ((v) & 0x4)
 #define IS_DBI(v) ((((v) >> 12) & 0x3) == 0x2)
-       if (IS_ACC_ECC_EN(regs->ddr_sdram_cfg) ||
-           IS_DBI(regs->ddr_sdram_cfg_3))
-               ddr_setbits32(ddr->debug[28], 0x9 << 20);
+       if (has_erratum_a008378()) {
+               if (IS_ACC_ECC_EN(regs->ddr_sdram_cfg) ||
+                   IS_DBI(regs->ddr_sdram_cfg_3))
+                       ddr_setbits32(&ddr->debug[28], 0x9 << 20);
+       }
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008511
index aebe3d292585cfdbab51fba749a6b52a3686f75f..8441f91029cc7ede239df7269d89787f717c518c 100644 (file)
@@ -58,4 +58,35 @@ static inline bool has_erratum_a007186(void)
 }
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008378
+static inline bool has_erratum_a008378(void)
+{
+       u32 svr = get_svr();
+       u32 soc = SVR_SOC_VER(svr);
+
+
+       switch (soc) {
+#ifdef CONFIG_LS102XA
+       case SOC_VER_LS1020:
+       case SOC_VER_LS1021:
+       case SOC_VER_LS1022:
+       case SOC_VER_SLS1020:
+               return IS_SVR_REV(svr, 1, 0);
+#endif
+#ifdef CONFIG_PPC
+       case SVR_T1023:
+       case SVR_T1024:
+               return IS_SVR_REV(svr, 1, 0);
+       case SVR_T1020:
+       case SVR_T1022:
+       case SVR_T1040:
+       case SVR_T1042:
+               return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
+#endif
+       default:
+               return false;
+       }
+}
+#endif
+
 #endif /*  _FSL_ERRATA_H */