include/configs: Use new CONFIG_CMD_* in various o* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 63d0da7d090ae6305a46d6ec5fdf6ee022732434..9ed1ed856c831435a0827e0ed5febbf34b38491e 100644 (file)
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -37,11 +37,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -82,20 +77,20 @@
 
 #define CONFIG_TIMESTAMP       /* Print image info with timestamp */
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PING    | \
-                               ADD_PCI_CMD     )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_PCI_CMD
+
 
 #if (TEXT_BASE == 0xFF000000)          /* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT         1
@@ -246,7 +241,7 @@
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -262,6 +257,11 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 68e8cec251cb23b0ac247526e08654fb12c9b6a0..fd45c1d970515ae1eb560c8b317c12766c2b9a80 100644 (file)
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -232,26 +232,29 @@
 
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
 
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -260,7 +263,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -310,7 +313,7 @@
  */
 #define CFG_DCACHE_SIZE                32768   /* For AMCC 440 CPUs                    */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 
@@ -322,7 +325,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 016d3d8bd020a98d2b5cefe7141dd930aa6a2372..11fdb471014d39b41e01253801aedcc17c6904e0 100644 (file)
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -86,11 +86,19 @@
 #define CONFIG_BAUDRATE                115200
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+#define CONFIG_COMMANDS                (CONFIG_CMD_DFL
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
 #define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY       3
@@ -98,7 +106,7 @@
 #define CONFIG_BOOTCOMMAND     "bootp;tftp;bootm"
 #define CFG_AUTOLOAD           "n"             /* No autoload */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */

diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index c6ca689a5fe04aee8960e834b43d843c719a3a90..d78f79f121e4bf1179e2e3699e926ec148e31994 100644 (file)
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -81,11 +81,17 @@
 #define CONFIG_BAUDRATE        115200
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
 #define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY       3
@@ -93,7 +99,7 @@
 #define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
 #define CFG_AUTOLOAD            "n"             /* No autoload */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
 #endif

diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index f28ede09674c4f149d92a8c3d44bd2171a2eeb7c..7d0658fd7de5a7a931dbf3ea986b565c5a888219 100644 (file)
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -82,11 +82,17 @@
 #define CONFIG_BAUDRATE        115200
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
 #define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY       3
@@ -98,7 +104,7 @@
 #define CONFIG_SERVERIP        156.117.97.139  /* current IP of my dev pc */
 #define CONFIG_BOOTFILE        "uImage"        /* file to load */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
 #endif

diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 58374616a14afb52f060792504dbe1e0055c49c9..46e0dcc4782eacdc211c6a6ebc372358be8f1226 100644 (file)
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -119,15 +119,27 @@
 #define CONFIG_BAUDRATE          115200
 #define CFG_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 #ifdef CFG_NAND_BOOT
-#define CONFIG_COMMANDS          (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
+    #define CONFIG_CMD_DHCP
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_NAND
+    #define CONFIG_CMD_JFFS2
 #else
-#define CONFIG_COMMANDS          ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT)
+    #define CONFIG_CMD_DHCP
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_JFFS2
+
+    #undef CONFIG_CMD_AUTOSCRIPT
 #endif
-#define CONFIG_BOOTP_MASK        CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTP_MASK        CONFIG_BOOTP_DEFAULT
 
 /*
  *  Board NAND Info.

diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 5db4f52beb68b00da7384618a183bbfcc3f640ce..296b6bc98000808da818f4abb55e4631a8747aed 100644 (file)
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -86,11 +86,17 @@
 #define CONFIG_BAUDRATE        115200
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
 #define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY       3
@@ -102,7 +108,7 @@
 #define CONFIG_SERVERIP        156.117.97.139  /* current IP of my dev pc */
 #define CONFIG_BOOTFILE        "uImage"        /* file to load */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
 #endif

diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index fda55cf06fd249ae24f9d3bd9c4f097800542926..af9877f24a95551e33be41d5b01526251e1c0fb6 100644 (file)
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -90,14 +90,17 @@
 #define CONFIG_BAUDRATE                   115200
 #define CFG_BAUDRATE_TABLE        { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_COMMANDS                   (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK         CONFIG_BOOTP_DEFAULT
 
 /*
- * This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ * Command line configuration.
  */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+#define CONFIG_BOOTP_MASK         CONFIG_BOOTP_DEFAULT
 
-#include <cmd_confdefs.h>
 #include <configs/omap730.h>
 #include <configs/h2_p2_dbg_board.h>
 
@@ -112,7 +115,7 @@
 #define CONFIG_SERVERIP                   192.150.0.100
 #define CONFIG_BOOTFILE                   "uImage"  /* File to load */
 
-#if defined (CONFIG_COMMANDS) && defined (CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE      115200    /* Speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX     1         /* Which serial port to use */
 #endif