]> git.sur5r.net Git - u-boot/commitdiff
TI ARMv7: Don't use GD before crt0.S has set it
authorTom Rini <trini@ti.com>
Fri, 19 Dec 2014 21:53:24 +0000 (16:53 -0500)
committerTom Rini <trini@ti.com>
Fri, 16 Jan 2015 19:52:52 +0000 (14:52 -0500)
Prior to this change we set the gd pointer early so that we can store
data in it.  This becomes problematic for DM changes as well as being
odd in general.  Re-work the code paths so that we don't need to set the
gd pointer so early and instead can rely upon the normal setting of it.

In order to do this we do need to move certain calls from s_init into
spl_board_init(), mainly preloader_console_init and
save_omap_boot_params.

Tested on: Beaglebone Black, AM43xx GP EVM, Beagleboard, Beagleboard xM,
OMAP5 uEVM, DRA7xx EVM
Signed-off-by: Tom Rini <trini@ti.com>
Tested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
arch/arm/cpu/armv7/am33xx/board.c
arch/arm/cpu/armv7/omap-common/boot-common.c
arch/arm/cpu/armv7/omap-common/hwinit-common.c
arch/arm/cpu/armv7/omap3/board.c

index eaf09d1a627746e0aea1c1317aa6a8ea390693ad..81477aa7b0c3fc9e432a248ca632fc0672a693db 100644 (file)
@@ -284,14 +284,6 @@ void s_init(void)
         */
 #ifdef CONFIG_NOR_BOOT
        enable_norboot_pin_mux();
-#endif
-       /*
-        * Save the boot parameters passed from romcode.
-        * We cannot delay the saving further than this,
-        * to prevent overwrites.
-        */
-#ifdef CONFIG_SPL_BUILD
-       save_omap_boot_params();
 #endif
        watchdog_disable();
        set_uart_mux_conf();
@@ -301,9 +293,6 @@ void s_init(void)
        gd->baudrate = CONFIG_BAUDRATE;
        serial_init();
        gd->have_console = 1;
-#elif defined(CONFIG_SPL_BUILD)
-       gd = &gdata;
-       preloader_console_init();
 #endif
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
        /* Enable RTC32K clock */
index 00a108212a7294c40e26ee0e12056a19510b3b0c..17500f2315ee9d3d5a8a5868c3e3e75f46a7148b 100644 (file)
@@ -106,6 +106,16 @@ u32 spl_boot_mode(void)
 
 void spl_board_init(void)
 {
+       /*
+        * Save the boot parameters passed from romcode.
+        * We cannot delay the saving further than this,
+        * to prevent overwrites.
+        */
+       save_omap_boot_params();
+
+       /* Prepare console output */
+       preloader_console_init();
+
 #ifdef CONFIG_SPL_NAND_SUPPORT
        gpmc_init();
 #endif
index dd52e938a9508171ff27dd909c0590f1c1ca7e22..cb35c198f1802edc71215f0bb170dc0407ae1e17 100644 (file)
@@ -111,14 +111,6 @@ int arch_cpu_init(void)
  */
 void s_init(void)
 {
-       /*
-        * Save the boot parameters passed from romcode.
-        * We cannot delay the saving further than this,
-        * to prevent overwrites.
-        */
-#ifdef CONFIG_SPL_BUILD
-       save_omap_boot_params();
-#endif
        init_omap_revision();
        hw_data_init();
 
@@ -133,9 +125,6 @@ void s_init(void)
        srcomp_enable();
        setup_clocks_for_console();
 
-       gd = &gdata;
-
-       preloader_console_init();
        do_io_settings();
 #endif
        prcm_init();
index 53a9e5d77df736f210f3310b8e8bae1ffe44ba16..90d6ae7bb5f5e8c43ef31b6477195875fdb1d1ab 100644 (file)
@@ -119,6 +119,7 @@ int board_mmc_init(bd_t *bis)
 
 void spl_board_init(void)
 {
+       preloader_console_init();
 #if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
        gpmc_init();
 #endif
@@ -264,14 +265,6 @@ void s_init(void)
        ehci_clocks_enable();
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-       gd = &gdata;
-
-       preloader_console_init();
-
-       timer_init();
-#endif
-
        if (!in_sdram)
                mem_init();
 }