powerpc/85xx: load ucode from nand flash before qe_init

In the case the QE's microcode is stored in nand flash, we need to load it from
NAND flash to ddr first then the qe_init can get the ucode correctly.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 215b7b3808b50017021ad456aae7f8767d6ee2eb..5642cd7b051c94682306f6bf7faeda71a09aa13e 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -37,6 +37,10 @@
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include "mp.h"
+#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#include <nand.h>
+#include <errno.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -448,6 +452,19 @@ void cpu_secondary_init_r(void)
 {
 #ifdef CONFIG_QE
        uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
+#ifdef CONFIG_SYS_QE_FW_IN_NAND
+       int ret;
+       size_t fw_length = CONFIG_SYS_QE_FW_LENGTH;
+
+       /* load QE firmware from NAND flash to DDR first */
+       ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND,
+                       &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
+
+       if (ret && ret == -EUCLEAN) {
+               printf ("NAND read for QE firmware at offset %x failed %d\n",
+                               CONFIG_SYS_QE_FW_IN_NAND, ret);
+       }
+#endif
        qe_init(qe_base);
        qe_reset();
 #endif