Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
Changes since U-Boot 1.1.4:
======================================================================
+* Add VGA support (CT69000) to CPCI750 board.
+ Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
+ Patch by Reinhard Arlt, 30 Dec 2005
+
* PMC405 and CPCI405: Moved configuration of pci resources
into config file.
PMC405 and CPCI2DP: Added firmware download and booting via pci.
{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
};
+#ifdef CONFIG_USE_CPCIDVI
+typedef struct {
+ unsigned int base;
+ unsigned int init;
+} GT_CPCIDVI_ROM_T;
+
+static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
+#endif
#ifdef DEBUG
static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
unsigned int offset =
(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
- pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
- 0x0);
- pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
- &bar_response);
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
+ 0x0);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
+ &bar_response);
pciauto_region_allocate (bar_response &
PCI_BASE_ADDRESS_SPACE_IO ? hose->
pci_io : hose->pci_mem, ide_bar[bar],
&bar_value);
- pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
- bar_value);
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4,
+ bar_value);
}
}
+#ifdef CONFIG_USE_CPCIDVI
+static void gt_setup_cpcidvi (struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *entry)
+{
+ u32 bar_value, pci_response;
+
+ pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
+ pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value);
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00));
+ pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0);
+ pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value);
+ pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01);
+ gt_cpcidvi_rom.base = bar_value & 0xffffff00;
+ gt_cpcidvi_rom.init = 1;
+}
+
+unsigned char gt_cpcidvi_in8(unsigned int offset)
+{
+ unsigned char data;
+
+ if (gt_cpcidvi_rom.init == 0) {
+ return(0);
+ }
+ data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
+ return(data);
+}
+
+void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
+{
+ unsigned int off;
+
+ if (gt_cpcidvi_rom.init == 0) {
+ return;
+ }
+ off = data;
+ off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
+ in8(off);
+ return;
+}
+#endif
/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */
/* and is curently not called *. */
#endif
struct pci_config_table gt_config_table[] = {
+#ifdef CONFIG_USE_CPCIDVI
+ {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi},
+#endif
{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
-
{}
};
#ifdef CONFIG_PCI_PNP
unsigned int bar;
#endif
-
#ifdef DEBUG
gt_pci_bus_mode_display (PCI_HOST0);
#endif
+#ifdef CONFIG_USE_CPCIDVI
+ gt_cpcidvi_rom.init = 0;
+ gt_cpcidvi_rom.base = 0;
+#endif
+
+ pci0_hose.config_table = gt_config_table;
+ pci1_hose.config_table = gt_config_table;
+
+#ifdef CONFIG_USE_CPCIDVI
+ gt_config_table[0].config_device = gt_setup_cpcidvi;
+#endif
+ gt_config_table[1].config_device = gt_setup_ide;
pci0_hose.first_busno = 0;
pci0_hose.last_busno = 0xff;
static const struct ctfb_chips_properties chips[] = {
{PCI_DEVICE_ID_CT_69000, 0x200000, 1, 4, -2, 3, 257, 100, 220},
+#ifdef CONFIG_USE_CPCIDVI
+ {PCI_DEVICE_ID_CT_69030, 0x400000, 1, 4, -2, 3, 257, 100, 220},
+#endif
{PCI_DEVICE_ID_CT_65555, 0x100000, 16, 4, 0, 1, 255, 48, 220}, /* NOT TESTED */
{0, 0, 0, 0, 0, 0, 0, 0, 0} /* Terminator */
};
*/
static struct pci_device_id supported[] = {
{PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69000},
+#ifdef CONFIG_USE_CPCIDVI
+ {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030},
+#endif
{}
};
pGD->cprBase = pci_mem_base; /* Dummy */
/* set up Hardware */
+#ifdef CONFIG_USE_CPCIDVI
+ if (device_id == PCI_DEVICE_ID_CT_69030) {
+ ctWrite (CT_MSR_W_O, 0x0b);
+ ctWrite (0x3cd, 0x13);
+ ctWrite_i (CT_FP_O, 0x02, 0x00);
+ ctWrite_i (CT_FP_O, 0x05, 0x00);
+ ctWrite_i (CT_FP_O, 0x06, 0x00);
+ ctWrite (0x3c2, 0x0b);
+ ctWrite_i (CT_FP_O, 0x02, 0x10);
+ ctWrite_i (CT_FP_O, 0x01, 0x09);
+ } else {
+ ctWrite (CT_MSR_W_O, 0x01);
+ }
+#else
ctWrite (CT_MSR_W_O, 0x01);
+#endif
/* set the extended Registers */
ctLoadRegs (CT_XR_O, xreg);
#ifdef CONFIG_I8042_KBD
+#ifdef CONFIG_USE_CPCIDVI
+extern u8 gt_cpcidvi_in8(u32 offset);
+extern void gt_cpcidvi_out8(u32 offset, u8 data);
+
+#define in8(a) gt_cpcidvi_in8(a)
+#define out8(a, b) gt_cpcidvi_out8(a,b)
+#endif
+
#include <i8042.h>
/* defines */
int keymap, try;
char *penv;
+#ifdef CONFIG_USE_CPCIDVI
+ if ((penv = getenv ("console")) != NULL) {
+ if (strncmp (penv, "serial", 7) == 0) {
+ return -1;
+ }
+ }
+#endif
/* Init keyboard device (default US layout) */
keymap = KBD_US;
if ((penv = getenv ("keymap")) != NULL)
if (kbd_input_empty() == 0)
return -1;
+#ifdef CONFIG_USE_CPCIDVI
+ out8 (I8042_COMMAND_REG, 0x60);
+#else
out8 (I8042_DATA_REG, 0x60);
+#endif
if (kbd_input_empty() == 0)
return -1;
int blockcnt;
int log2blocksize = LOG2_EXT2_BLOCK_SIZE (node->data);
int blocksize = 1 << (log2blocksize + DISK_SECTOR_BITS);
- unsigned int filesize = node->inode.size;
+ unsigned int filesize = __le32_to_cpu(node->inode.size);
/* Adjust len so it we can't read past the end of the file. */
if (len > filesize) {
#define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX"
/*#define CFG_HUSH_PARSER*/
-#undef CFG_HUSH_PARSER
+#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_AUTO_COMPLETE 1
+
/* Define which ETH port will be used for connecting the network */
#define CFG_ETH_PORT ETH_0
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#define CONFIG_USE_CPCIDVI
+
+#ifdef CONFIG_USE_CPCIDVI
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_CT69000
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_I8042_KBD
+#define CFG_ISA_IO 0
+#endif
+
/*
* Miscellaneous configurable options
*/
#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
#define CFG_PCI1_IO_SPACE_PCI 0x00000000
+#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
+
#if defined (CONFIG_750CX)
#define CFG_PCI_IDSEL 0x0
#else
#define PCI_DEVICE_ID_CT_65554 0x00e4
#define PCI_DEVICE_ID_CT_65555 0x00e5
#define PCI_DEVICE_ID_CT_69000 0x00c0
+#define PCI_DEVICE_ID_CT_69030 0x0c30
#define PCI_VENDOR_ID_MIRO 0x1031
#define PCI_DEVICE_ID_MIRO_36050 0x5601