START = start.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
COBJS-y := cpu.o timer.o
ifndef CONFIG_SKIP_LOWLEVEL_INIT
-SOBJS := lowlevel_init.o
+SOBJS-y := lowlevel_init.o
endif
ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
-SOBJS += watchdog.o
+SOBJS-y += watchdog.o
endif
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
all: $(obj).depend $(LIB)
#define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1)
#define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2)
#define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR)
+#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR)
#define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1
#define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2
#define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2
#define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR
+#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR
/*
* parameters for the static memory controller
led 0x10
jal remap
+#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
+ led 0x1f
+ jal enable_fpu
+#endif
+
led 0x20
ret $r10
*/
led 0x1a
write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001100
+ write32 SDMC_B1_BSR_A, SDMC_B1_BSR_D ! 0x00001140
/* clear empty BSR registers */
led 0x1b
li $r4, CONFIG_FTSDMC021_BASE
li $r5, 0x0
- swi $r5, [$r4 + FTSDMC021_BANK1_BSR]
swi $r5, [$r4 + FTSDMC021_BANK2_BSR]
swi $r5, [$r4 + FTSDMC021_BANK3_BSR]
* - after remap: flash/rom 0x80000000, sdram: 0x00000000
*/
led 0x1c
+ write32 SDMC_B0_BSR_A, 0x00001000
+ write32 SDMC_B1_BSR_A, 0x00001040
setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
#endif /* #ifdef CONFIG_MEM_REMAP */
2:
ret
+ /*
+ * enable_fpu:
+ * Some of Andes CPU version support FPU coprocessor, if so,
+ * and toolchain support FPU instruction set, we should enable it.
+ */
+#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
+enable_fpu:
+ mfsr $r0, $CPU_VER /* enable FPU if it exists */
+ srli $r0, $r0, 3
+ andi $r0, $r0, 1
+ beqz $r0, 1f /* skip if no COP */
+ mfsr $r0, $FUCOP_EXIST
+ srli $r0, $r0, 31
+ beqz $r0, 1f /* skip if no FPU */
+ mfsr $r0, $FUCOP_CTL
+ ori $r0, $r0, 1
+ mtsr $r0, $FUCOP_CTL
+1:
+ ret
+#endif
+
.globl show_led
show_led:
li $r8, (CONFIG_DEBUG_LED)
#ifdef CONFIG_FTTMR010_EXT_CLK
lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
#else
- lastdec = readl(&tmr->timer3_counter) / (CONFIG_SYS_CLK_FREQ / 2);
+ lastdec = readl(&tmr->timer3_counter) /
+ (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
#endif
timestamp = 0; /* start "advancing" time stamp from 0 */
#ifdef CONFIG_FTTMR010_EXT_CLK
ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
#else
- ulong now = readl(&tmr->timer3_counter) / \
- (CONFIG_SYS_CLK_FREQ / 2 / 1024);
+ ulong now = readl(&tmr->timer3_counter) /
+ (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
#endif
debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
COBJS-y := cpu.o timer.o
ifndef CONFIG_SKIP_LOWLEVEL_INIT
-SOBJS := lowlevel_init.o
+SOBJS-y := lowlevel_init.o
endif
ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
-SOBJS += watchdog.o
+SOBJS-y += watchdog.o
endif
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
all: $(obj).depend $(LIB)
led 0x20
jal remap
+#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
+ led 0x2f
+ jal enable_fpu
+#endif
+
led 0x30
ret $r10
2:
ret
+ /*
+ * enable_fpu:
+ * Some of Andes CPU version support FPU coprocessor, if so,
+ * and toolchain support FPU instruction set, we should enable it.
+ */
+#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
+enable_fpu:
+ mfsr $r0, $CPU_VER /* enable FPU if it exists */
+ srli $r0, $r0, 3
+ andi $r0, $r0, 1
+ beqz $r0, 1f /* skip if no COP */
+ mfsr $r0, $FUCOP_EXIST
+ srli $r0, $r0, 31
+ beqz $r0, 1f /* skip if no FPU */
+ mfsr $r0, $FUCOP_CTL
+ ori $r0, $r0, 1
+ mtsr $r0, $FUCOP_CTL
+1:
+ ret
+#endif
+
.globl show_led
show_led:
li $r8, (CONFIG_DEBUG_LED)
#ifdef CONFIG_FTTMR010_EXT_CLK
lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
#else
- lastdec = readl(&tmr->timer3_counter) / (CONFIG_SYS_CLK_FREQ / 2);
+ lastdec = readl(&tmr->timer3_counter) /
+ (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
#endif
timestamp = 0; /* start "advancing" time stamp from 0 */
#ifdef CONFIG_FTTMR010_EXT_CLK
ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
#else
- ulong now = readl(&tmr->timer3_counter) / \
- (CONFIG_SYS_CLK_FREQ / 2 / 1024);
+ ulong now = readl(&tmr->timer3_counter) /
+ (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
#endif
debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * SPDX-License-Identifier: GPL-2.0
*
* Modifications:
* 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both
#define out_8(a, v) __raw_writeb(v, a)
#define in_8(a) __raw_readb(a)
+/*
+ * Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+ out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+ out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+ out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
/*
* Now, pick up the machine-defined IO definitions
* #include <asm/arch/io.h>
--- /dev/null
+/*
+ * linux/arch/nds32/include/asm/setup.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2008 Andes Technology Corporation
+ * Copyright (C) 2013 Ken Kuo (ken_kuo@andestech.com)
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * Structure passed to kernel to tell it about the
+ * hardware it's running on. See Documentation/arm/Setup
+ * for more info.
+ */
+#ifndef __ASMNDS32_SETUP_H
+#define __ASMNDS32_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE 0x00000000
+
+struct tag_header {
+ u32 size;
+ u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE 0x54410001
+
+struct tag_core {
+ u32 flags; /* bit 0 = read-only */
+ u32 pagesize;
+ u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM 0x54410002
+
+struct tag_mem32 {
+ u32 size;
+ u32 start; /* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT 0x54410003
+
+struct tag_videotext {
+ u8 x;
+ u8 y;
+ u16 video_page;
+ u8 video_mode;
+ u8 video_cols;
+ u16 video_ega_bx;
+ u8 video_lines;
+ u8 video_isvga;
+ u16 video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK 0x54410004
+
+struct tag_ramdisk {
+ u32 flags; /* bit 0 = load, bit 1 = prompt */
+ u32 size; /* decompressed ramdisk size in _kilo_ bytes */
+ u32 start; /* starting block of floppy-based RAM disk image */
+};
+
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ * describes where the compressed ramdisk image lives (virtual address)
+ */
+#define ATAG_INITRD 0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2 0x54420005
+
+struct tag_initrd {
+ u32 start; /* physical start address */
+ u32 size; /* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL 0x54410006
+
+struct tag_serialnr {
+ u32 low;
+ u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION 0x54410007
+
+struct tag_revision {
+ u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB 0x54410008
+
+struct tag_videolfb {
+ u16 lfb_width;
+ u16 lfb_height;
+ u16 lfb_depth;
+ u16 lfb_linelength;
+ u32 lfb_base;
+ u32 lfb_size;
+ u8 red_size;
+ u8 red_pos;
+ u8 green_size;
+ u8 green_pos;
+ u8 blue_size;
+ u8 blue_pos;
+ u8 rsvd_size;
+ u8 rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE 0x54410009
+
+struct tag_cmdline {
+ char cmdline[COMMAND_LINE_SIZE];
+};
+
+struct tag {
+ struct tag_header hdr;
+ union {
+ struct tag_core core;
+ struct tag_mem32 mem;
+ struct tag_videotext videotext;
+ struct tag_ramdisk ramdisk;
+ struct tag_initrd initrd;
+ struct tag_serialnr serialnr;
+ struct tag_revision revision;
+ struct tag_videolfb videolfb;
+ struct tag_cmdline cmdline;
+ } u;
+};
+
+struct tagtable {
+ u32 tag;
+ int (*parse)(const struct tag *);
+};
+
+#define tag_member_present(tag, member) \
+ ((unsigned long)(&((struct tag *)0L)->member + 1) \
+ <= (tag)->hdr.size * 4)
+
+#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t, base) \
+ for (t = base; t->hdr.size; t = tag_next(t))
+
+#ifdef __KERNEL__
+
+#define __tag __used __attribute__((__section__(".taglist")))
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+/*
+ * Memory map description
+ */
+#define NR_BANKS 8
+
+struct meminfo {
+ int nr_banks;
+ struct {
+ unsigned long start;
+ unsigned long size;
+ int node;
+ } bank[NR_BANKS];
+};
+
+/*
+ * Early command line parameters.
+ */
+struct early_params {
+ const char *arg;
+ void (*fn)(char **p);
+};
+
+#define __early_param(name, fn) \
+static struct early_params __early_##fn __used \
+__attribute__((__section__("__early_param"))) = { name, fn }
+
+#endif
+#endif
LIB = $(obj)lib$(ARCH).o
-OBJS := board.o cache.o interrupts.o
+COBJS-y += board.o
+COBJS-y += cache.o
COBJS-$(CONFIG_CMD_BOOTM) += bootm.o
+COBJS-y += interrupts.o
-all: $(LIB)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
LIB = $(obj)lib$(BOARD).o
-COBJS := adp-ag101.o
+COBJS-y := adp-ag101.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
int dram_init(void)
{
unsigned long sdram_base = PHYS_SDRAM_0;
- unsigned long expected_size = PHYS_SDRAM_0_SIZE;
+ unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
unsigned long actual_size;
actual_size = get_ram_size((void *)sdram_base, expected_size);
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
+}
+
int board_eth_init(bd_t *bd)
{
return ftmac100_initialize(bd);
LIB = $(obj)lib$(BOARD).o
-COBJS := adp-ag101p.o
+COBJS-y := adp-ag101p.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
int dram_init(void)
{
unsigned long sdram_base = PHYS_SDRAM_0;
- unsigned long expected_size = PHYS_SDRAM_0_SIZE;
+ unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
unsigned long actual_size;
actual_size = get_ram_size((void *)sdram_base, expected_size);
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
+}
+
int board_eth_init(bd_t *bd)
{
return ftmac100_initialize(bd);
COBJS := adp-ag102.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#include <netdev.h>
#include <asm/io.h>
+#include <faraday/ftpci100.h>
#include <faraday/ftsdc010.h>
#ifdef CONFIG_FTSMC020
#include <faraday/ftsmc020.h>
void pci_init_board(void)
{
/* should be pci_ftpci100_init() */
- extern void pci_ftpci_init();
-
pci_ftpci_init();
}
#endif
uchar ide_read_register(int dev, unsigned int port);
void ide_write_register(int dev, unsigned int port, unsigned char val);
void ide_read_data(int dev, ulong *sect_buf, int words);
- void ide_write_data(int dev, ulong *sect_buf, int words);
+ void ide_write_data(int dev, const ulong *sect_buf, int words);
The first two functions are called from ide_inb()/ide_outb(), and will
default to direct memory access if CONFIG_IDE_AHB is not set, or
IDE_REG_DA_WRITE(port) | val);
}
-void ide_write_data(int dev, ulong *sect_buf, int words)
+void ide_write_data(int dev, const ulong *sect_buf, int words)
{
static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
len = data->blocksize * data->blocks;
/* 1. data disable + fifo reset */
- writel(FTSDC010_DCR_FIFO_RST, ®s->dcr);
+ dcr = 0;
+#ifdef CONFIG_FTSDC010_SDIO
+ dcr |= FTSDC010_DCR_FIFO_RST;
+#endif
+ writel(dcr, ®s->dcr);
/* 2. clear status register */
writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
#include <malloc.h>
#include <pci.h>
+#include <faraday/ftpci100.h>
+
#include <asm/io.h>
#include <asm/types.h> /* u32, u16.... used by pci.h */
-#include "pci_ftpci100.h"
-
struct ftpci100_data {
unsigned int reg_base;
unsigned int io_base;
+++ /dev/null
-/*
- * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
- *
- * Copyright (C) 2010 Andes Technology Corporation
- * Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __FTPCI100_H
-#define __FTPCI100_H
-
-/* AHB Control Registers */
-struct ftpci100_ahbc {
- unsigned int iosize; /* 0x00 - I/O Space Size Signal */
- unsigned int prot; /* 0x04 - AHB Protection */
- unsigned int rsved[8]; /* 0x08-0x24 - Reserved */
- unsigned int conf; /* 0x28 - PCI Configuration */
- unsigned int data; /* 0x2c - PCI Configuration DATA */
-};
-
-/*
- * FTPCI100_IOSIZE_REG's constant definitions
- */
-#define FTPCI100_BASE_IO_SIZE(x) (ffs(x) - 1) /* 1M - 2048M */
-
-/*
- * PCI Configuration Register
- */
-#define PCI_INT_MASK 0x4c
-#define PCI_MEM_BASE_SIZE1 0x50
-#define PCI_MEM_BASE_SIZE2 0x54
-#define PCI_MEM_BASE_SIZE3 0x58
-
-/*
- * PCI_INT_MASK's bit definitions
- */
-#define PCI_INTA_ENABLE (1 << 22)
-#define PCI_INTB_ENABLE (1 << 23)
-#define PCI_INTC_ENABLE (1 << 24)
-#define PCI_INTD_ENABLE (1 << 25)
-
-/*
- * PCI_MEM_BASE_SIZE1's constant definitions
- */
-#define FTPCI100_BASE_ADR_SIZE(x) ((ffs(x) - 1) << 16) /* 1M - 2048M */
-
-#define FTPCI100_MAX_FUNCTIONS 20
-#define PCI_IRQ_LINES 4
-
-#define MAX_BUS_NUM 256
-#define MAX_DEV_NUM 32
-#define MAX_FUN_NUM 8
-
-#define PCI_MAX_BAR_PER_FUNC 6
-
-/*
- * PCI_MEM_SIZE
- */
-#define FTPCI100_MEM_SIZE(x) (ffs(x) << 24)
-
-/* This definition is used by pci_ftpci_init() */
-#define FTPCI100_BRIDGE_VENDORID 0x159b
-#define FTPCI100_BRIDGE_DEVICEID 0x4321
-
-struct pcibar {
- unsigned int size;
- unsigned int addr;
-};
-
-struct pci_config {
- unsigned int bus;
- unsigned int dev; /* device */
- unsigned int func;
- unsigned int pin;
- unsigned short v_id; /* vendor id */
- unsigned short d_id; /* device id */
- struct pcibar bar[PCI_MAX_BAR_PER_FUNC + 1];
-};
-
-#endif
#endif
#ifdef CONFIG_NDS32
# include <asm/mach-types.h>
+# include <asm/setup.h>
# include <asm/u-boot-nds32.h>
#endif /* CONFIG_NDS32 */
#ifdef CONFIG_MIPS
#define CONFIG_SKIP_LOWLEVEL_INIT
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG /* send initrd params */
+
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_MEM_REMAP
#endif
#define CONFIG_DOS_PARTITION
#define CONFIG_FTSDC010
#define CONFIG_FTSDC010_NUMBER 1
+#define CONFIG_FTSDC010_SDIO
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
/*
* Command line configuration.
#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
CONFIG_SYS_FTSDMC021_BANK0_BASE)
+#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
+ (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
+#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
+ CONFIG_SYS_FTSDMC021_BANK1_BASE)
+
#endif
/*
#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
#define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */
#endif
+#define PHYS_SDRAM_1 \
+ (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
#define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
#define CONFIG_SKIP_LOWLEVEL_INIT
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG /* send initrd params */
+
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_MEM_REMAP
#endif
#define CONFIG_DOS_PARTITION
#define CONFIG_FTSDC010
#define CONFIG_FTSDC010_NUMBER 1
+#define CONFIG_FTSDC010_SDIO
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
/*
* Command line configuration.
#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
CONFIG_SYS_FTSDMC021_BANK0_BASE)
+#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
+ (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
+#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
+ CONFIG_SYS_FTSDMC021_BANK1_BASE)
#endif
/*
#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
#define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */
#endif
+#define PHYS_SDRAM_1 \
+ (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
#define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
--- /dev/null
+/*
+ * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
+ *
+ * Copyright (C) 2010 Andes Technology Corporation
+ * Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FTPCI100_H
+#define __FTPCI100_H
+
+/* AHB Control Registers */
+struct ftpci100_ahbc {
+ unsigned int iosize; /* 0x00 - I/O Space Size Signal */
+ unsigned int prot; /* 0x04 - AHB Protection */
+ unsigned int rsved[8]; /* 0x08-0x24 - Reserved */
+ unsigned int conf; /* 0x28 - PCI Configuration */
+ unsigned int data; /* 0x2c - PCI Configuration DATA */
+};
+
+/*
+ * FTPCI100_IOSIZE_REG's constant definitions
+ */
+#define FTPCI100_BASE_IO_SIZE(x) (ffs(x) - 1) /* 1M - 2048M */
+
+/*
+ * PCI Configuration Register
+ */
+#define PCI_INT_MASK 0x4c
+#define PCI_MEM_BASE_SIZE1 0x50
+#define PCI_MEM_BASE_SIZE2 0x54
+#define PCI_MEM_BASE_SIZE3 0x58
+
+/*
+ * PCI_INT_MASK's bit definitions
+ */
+#define PCI_INTA_ENABLE (1 << 22)
+#define PCI_INTB_ENABLE (1 << 23)
+#define PCI_INTC_ENABLE (1 << 24)
+#define PCI_INTD_ENABLE (1 << 25)
+
+/*
+ * PCI_MEM_BASE_SIZE1's constant definitions
+ */
+#define FTPCI100_BASE_ADR_SIZE(x) ((ffs(x) - 1) << 16) /* 1M - 2048M */
+
+#define FTPCI100_MAX_FUNCTIONS 20
+#define PCI_IRQ_LINES 4
+
+#define MAX_BUS_NUM 256
+#define MAX_DEV_NUM 32
+#define MAX_FUN_NUM 8
+
+#define PCI_MAX_BAR_PER_FUNC 6
+
+/*
+ * PCI_MEM_SIZE
+ */
+#define FTPCI100_MEM_SIZE(x) (ffs(x) << 24)
+
+/* This definition is used by pci_ftpci_init() */
+#define FTPCI100_BRIDGE_VENDORID 0x159b
+#define FTPCI100_BRIDGE_DEVICEID 0x4321
+
+void pci_ftpci_init(void);
+
+struct pcibar {
+ unsigned int size;
+ unsigned int addr;
+};
+
+struct pci_config {
+ unsigned int bus;
+ unsigned int dev; /* device */
+ unsigned int func;
+ unsigned int pin;
+ unsigned short v_id; /* vendor id */
+ unsigned short d_id; /* device id */
+ struct pcibar bar[PCI_MAX_BAR_PER_FUNC + 1];
+};
+
+#endif
unsigned char ide_read_register(int dev, unsigned int port);
void ide_write_register(int dev, unsigned int port, unsigned char val);
void ide_read_data(int dev, ulong *sect_buf, int words);
-void ide_write_data(int dev, ulong *sect_buf, int words);
+void ide_write_data(int dev, const ulong *sect_buf, int words);
#endif
/*