+commit bcab74baa6b1b1c969038ab6f64a186239180405
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 15 11:23:02 2008 -0400
+
+ Round the serial port clock divisor value returned by calc_divisor()
+
+ Round the serial port clock divisor value returned by
+ calc_divisor()
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0328ef0edfe950f0b7b8b368dae482531506b74a
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Tue Jul 15 21:44:46 2008 +0200
+
+ Fix DHCP protocol so U-Boot does not respond too early
+ on the network with it's offered IP number; it should not reply until
+ after it has received a DHCP ACK message. Also ensures that U-Boot
+ does it's DHCPREQUEST as broadcast (per RFC 2131).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Tue Jul 15 13:35:23 2008 +0200
+
+ cfi_flash: make the command u32 only
+
+ This got changed by commit 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ Long is the wrong type because it will behave differently on 64bit
+ machines in a way that is probably not expected. u32 should be
+ enough.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 31cfe57491b183acae575d486729e158f016c27b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jul 14 23:48:41 2008 +0200
+
+ tools/gitignore: update to all generated files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 9 18:30:44 2008 +0200
+
+ mpc5xxx: Add MVBC_P board support
+
+ The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
+ controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e2d31fb3450653115452144363d5bde4e5e3e693
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Jun 19 17:56:11 2008 -0500
+
+ Update Freescale sys_eeprom.c to handle CCID formats
+
+ Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
+ NXID format replaces the older CCID format, but it's important to support both
+ since most boards out there still use the CCID format. This change is in
+ preparation for using one file to handle both formats. This will also unify
+ EEPROM support for all Freescale 85xx and 86xx boards.
+
+ Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
+ instead of ID_EEPROM_ADDR.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Jul 11 17:22:43 2008 +0900
+
+ pci: sh: Add pci_skip_dev and pci_print_dev function
+
+ Add function of new PCI, pci_skip_dev and pci_print_dev.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1107014e835ec9d46c0333f4211d104f77442db0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:29:07 2008 -0500
+
+ Clean up INIT_RAM options
+
+ The L2_INIT_RAM option was unused, and recent changes to the TLB code
+ meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
+ the amount of mapped space attached to nothing, we change things so the TLBs
+ get cleared.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 4524561820a9327e89107854b3a7187800ccf719
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:26:57 2008 -0500
+
+ Remove fake flash bank from 8544 DS
+
+ The fake flash bank was generating errors for anyone who didn't have a
+ PromJET hooked up to the board. As that constitutes the vast majority of
+ users, we remove it.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:03 2008 -0500
+
+ MPC8544DS: Add ATI Video card support
+
+ Add support for using a PCIe ATI Video card on PCIe2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:02 2008 -0500
+
+ 85xx: Add some L1/L2 SPR register definitions
+
+ Add new L1/L2 SPRs related to e500mc cache config and control.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e5852787f0c3c442a276262f13d91ca450605ac0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:01 2008 -0500
+
+ MPC8544DS: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 73f15a060f67a2462551c334215bd20fac6b81d1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:00 2008 -0500
+
+ 85xx: Cleanup L2 cache size detection
+
+ The L2 size detection code was a bit confusing and we kept having to add
+ code to it to handle new processors. Change the sense of detection so we
+ look for the older processors that aren't changing.
+
+ Also added support for 1M cache size on 8572.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c3ca7e5e00a24451f20df3bded9a61ba541921df
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:08 2008 -0400
+
+ sbc8560: enable CONFIG_OF_LIBFDT by default
+
+ Make the default build for the sbc8560 board be powerpc
+ capable with libfdt support.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:04:40 2008 -0500
+
+ Fix indentation for default boot environment variables
+
+ This was proposed by Paul Gortmaker in response to Wolfgang's comments on
+ similar #defines in sbc8560.h.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:07 2008 -0400
+
+ sbc8560: add default fdt values
+
+ Add in the default fdt settings and the typical EXTRA_ENV
+ settings as borrowed from the mpc8560ads. Fix a couple
+ of stale references to the mpc8560ads dating back to the
+ original clone/fork.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d04e76edf92f7f89696989e8702b97e020455af3
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:06 2008 -0400
+
+ sbc8560: add in ft_board_setup()
+
+ Add in for the sbc8560, the ft_board_setup() routine, based on what is
+ in use for the Freescale MPC8560ADS board.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit c158bcaca3b31cbe38c4143812e6170e38a57393
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:05 2008 -0400
+
+ sbc8560: define eth0 and eth1 instead of eth1 and eth2
+
+ The existing config doesn't define CONFIG_HAS_ETH0, and so the
+ fdt support doesn't update the zeros in the dtb local-mac with
+ real data from the u-boot env. Since the existing config is
+ tailored to just two interfaces, get rid of the ETH2 definitions
+ at the same time.
+
+ Also don't include any end user specific data into the environment
+ by default -- things like MAC address, network parameters etc. need
+ to come from the end user.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:04 2008 -0400
+
+ sbc8560: properly set cs0_bnds for 512MB
+
+ The sbc8560 board ships with 512MB of memory installed,
+ but the current cs0_bnds is hard coded for 256MB. Set the
+ value based on CFG_SDRAM_SIZE.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:03 2008 -0400
+
+ sbc8560: proper definitions for TSEC.
+
+ The definitions for the TSEC have become out of date. There is no
+ longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
+ Update to match those of other boards, like the MPC8560ADS.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 71074abbe0c76429577aff58aeff0a24ad210b23
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Jul 9 13:23:05 2008 -0400
+
+ 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
+
+ Some boards that have external 16550 UARTs don't have a direct
+ tie between bi_busfreq and the clock used for the UARTs. Boards
+ that do have such a tie should set CFG_NS16550_CLK to be
+ get_bus_freq(0) -- which most of them do already.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 24ef76f320fbadf074105229826514db140f939f
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Wed Jul 2 07:03:53 2008 -0700
+
+ Change the temp map to ROM to align addresses to page size.
+
+ With a page size of BOOKE_PAGESZ_16M, both the real and effective
+ addresses must be multiples of 16MB. The hardware silently truncates
+ them so the code happens to work. This patch clarifies the situation
+ by establishing addresses that the hardware doesn't need to truncate.
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 06b4186c10204b6683edb047ac5f506fb0ce0937
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 17 17:45:22 2008 -0500
+
+ mpc85xx: use IS_E_PROCESSOR macro
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 16 15:55:53 2008 -0500
+
+ fdt: add crypto node handling for MPC8{3, 5}xxE processors
+
+ Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
+ check rev and up-rev crypto node (to SEC rev. 2.4 property values)
+ if on an 'EA' processor, e.g. MPC8349EA.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:11 2008 -0400
+
+ ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
+
+ ARM DaVinci: Remove extern phy_t declaration by moving
+ code to proper place.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:10 2008 -0400
+
+ ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
+
+ ARM DaVinci: Remove duplicate definitions of MACH_TYPE
+ and prototype of i2c_init().
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:03:02 2008 -0500
+
+ Fix some more printf() format problems.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45b16d22c64674ccd8c4637456a987463609141c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 22:38:42 2008 +0200
+
+ Fix coding style; make code better parsable by external tools
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b880cbf207b1c109d3a661417a8feddcbd729a9d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 21:19:08 2008 +0200
+
+ cpu/i386/serial.c: Fix syntax errors
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:41:35 2008 +0200
+
+ elppc board: Coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:40:22 2008 +0200
+
+ elppc board: fix syntax error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:38:26 2008 +0200
+
+ EB+MCF-EV123 board: fix coding style (alingment)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6841785a0bb0f38175456a923edd634fb7dd6947
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:36:44 2008 +0200
+
+ EB+MCF-EV123 board: fix syntx error
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 7 18:02:08 2008 -0500
+
+ Remove LBC_CACHE_BASE from 8544 DS
+
+ The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
+ space for some anyway, we were allowing speculative loads into unmapped space,
+ which would cause an exception (annoying, even if ultimately harmless).
+ Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
+ problem.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:19:07 2008 +0200
+
+ Code cleanup: fix old style assignment ambiguities like "=-" etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d7854223c5c85b5849fbf422cc8ac0efef461c37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:10:53 2008 +0200
+
+ AmigaOneG3SE: remove dead and incomplete files
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b64f190b7a34224df09b559ca111eb1b733f00ad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:06:35 2008 +0200
+
+ Fix printf() format issues with sizeof_t types by using %zu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f354b73e16a86f9e9085471a830605f74f84ea5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jul 14 14:11:45 2008 +0200
+
+ vsprintf: add z and t options
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 23:07:35 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d5996dd555edf52721b7691a4c59de016251ed39
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 19:51:00 2008 +0200
+
+ Fix some more printf() format problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f9d5f6d6e814907794995c6a22af752040c35d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 19:48:26 2008 +0200
+
+ ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sat Jul 12 17:31:36 2008 +0200
+
+ Fix bug in Lime video driver
+
+ We need to wait while drawing engine clears frame
+ buffer before any further software accesses to frame
+ buffer will be initiated. Otherwise software drawn
+ parts could be partially destroyed by the drawing
+ engine or even GDC chip freeze could occur (as
+ observed on socrates board).
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jul 12 14:36:34 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 18c8a28aad49803780bd8d52432ded528e37e701
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 15:11:57 2008 +0200
+
+ hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 11:50:53 2008 +0200
+
+ hwmon: Cleaning hwmon devices
+
+ Clean Makefile
+ Move device specific values to driver for better reading
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit c78fce699c7ff467ecd841da6a79f065180bf578
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:43:13 2008 +0200
+
+ FIS: repare incorrect return value with ramdisk handling
+
+ Microblaze and PowerPC use boot_get_ramdisk for loading
+ ramdisk to memory with checking return value.
+ Return 0 means success. Return 1 means failed.
+ Here is correspond part of code from bootm.c which check
+ return code.
+
+ ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
+ &rd_data_start, &rd_data_end);
+ if (ret)
+ goto error;
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:10:32 2008 +0200
+
+ microblaze: Remove useless ancient headers
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 53ea981c3124b13c137c2d10e975b7c6672266e0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:10:31 2008 +0200
+
+ microblaze: Clean uartlite driver
+
+ Redesign uartlite driver to in_be32 and out_be32 macros
+ Fix missing header in io.h
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit dbf3dfb386a2d5d2381814e39985ab2e21894550
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Jul 11 02:39:14 2008 +0200
+
+ Enable passing of ATAGs required by latest Linux kernel.
+
+commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 10:24:15 2008 -0400
+
+ Fix integer overflow warning in calc_divisor()
+
+ which happened when rounding the serial port clock divisor
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 6b760189d77f001684e3160b355c185ca3804961
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Jul 11 01:09:59 2008 +0200
+
+ Fix build time warnings in function mmc_decode_csd()
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit c15947d6ce0d59925c97fdfac692476af6e262d0
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Thu Jul 10 10:46:33 2008 -0400
+
+ ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
+
+ caused by missing dcache status/enable/disable functions.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 13:53:31 2008 +0200
+
+ ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
+
+ This patch removes some ft_board_setup() functions from some 4xx boards.
+ This can be done since we now have a default weak implementation for this
+ in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
+ implementation like canyonlands need their own version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 14:58:16 2008 +0200
+
+ Add last known maintainer for orphaned boards; reformat.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jul 10 13:16:04 2008 +0200
+
+ Remove kharris@nexus-tech.net from MAINTAINERS
+
+ Mail to kharris@nexus-tech.net bounces because the user doesn't exist
+ anymore. You can't be a maintainer without a valid e-mail address, so
+ move all boards that used to be maintained by Kyle Harris to the
+ "orphaned" list.
+
+ Currently, only PowerPC has a list of orphaned boards, so this patch
+ creates one for ARM as well.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 17bd17071463b0cde391ac4a0863d600474b4ea1
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Jul 10 01:15:10 2008 +0200
+
+ at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
+
+ On the at91sam9260ep development board there is an EEPROM
+ connected to the TWI interface (PA23, PA24 Peripheral A
+ multiplexing), so we cannot use these pins as ETX2, ETX3.
+ This patch configures PA10, PA11 pins for ETX2, ETX3
+ instead of PA23, PA24 pins.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
+
+commit f889265753ddf4465d9d580827bb9289bfac55d6
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Sat Jul 12 13:18:34 2008 -0600
+
+ fix DIU for small screens
+
+ The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
+ so it was not possible to set a slow pixel clock and thus prevented
+ display on small screens.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit b60b8573875e650e4c69be667bfc88d3ed474a7c
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Jul 11 14:44:09 2008 -0600
+
+ ADS5121 cleanup compile warnings
+
+ board/ads5121/iopin.c
+ Replace bit fields in struct iopin_t with a single
+ field and intialize it via plain old macros.
+ This fixes the type pun warnings and makes the code
+ more readable.
+
+ board/ads5121/ads5121.c
+ Add include iopin.h to ads5121.c for the iopin_initialize
+ prototype.
+
+ Add an extern void ads5121_diu_init(void)
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit bde63587622c4b830a27d1ddf7265843de9e994f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 22:56:11 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 22:55:31 2008 +0200
+
+ Fixed some out-of-tree build issues
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 16:20:23 2008 -0500
+
+ ColdFire: Fix FB CS not setup properly for Mcf5282
+
+ Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
+ CFG_CSn_RO is defined as 0, the chipselect will not
+ be assigned.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:47:27 2008 -0500
+
+ ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
+
+ Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
+ clock module in cpu/<cf arch>/cpu_init.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f94945b517f10e01927101679c62361e03d4e837
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:25:01 2008 -0500
+
+ ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:21:44 2008 -0500
+
+ Fix compile error caused by missing timer function
+
+ Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit c37ea031175b807c54e6bad9b270e9bede6c0078
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:14:25 2008 -0500
+
+ Fix compile error caused by incorrect function return type
+
+ Rename int mii_init(void) to void mii_init(void)
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:27:23 2008 -0500
+
+ ColdFire: Fix power up issue for MCF5235
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:19:07 2008 -0500
+
+ ColdFire: Fix compiling error for MCF5275
+
+ The compiling error was caused by missing a closed parentheses
+ in speed.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:14:01 2008 -0500
+
+ ColdFire: Fix timer issue for MCF5272
+
+ The timer was assigned to wrong timer memory mapped which
+ caused udelay() and timer() not working properly.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:12:13 2008 -0500
+
+ ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 8371dc2066136be21e10b7b9293e469297d77298
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:05:23 2008 -0500
+
+ ColdFire: Add -got=single param for new linux v4e toolchains
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 13:21:19 2008 -0500
+
+ ColdFire: Fix code flash configuration for M547x/M548x boards
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 6e37091afc07fdcc15590093fd066b0cb7399f85
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jun 24 12:12:16 2008 -0500
+
+ ColdFire: Fix warning messages by passing correct data type in board.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 81cc32322acb1b3225ee45606ced48e2a14824dc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu May 29 12:21:54 2008 -0500
+
+ ColdFire: Fix UART baudrate formula
+
+ The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
+ can generate the wrong divisor due to integer division truncation.
+ Round the calculated divisor value by adding 1/2 the baudrate
+ before dividing by the baudrate.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit b578fb471444cbd7db1285701ba51343baaf73fb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 11:38:26 2008 +0200
+
+ ppc4xx: Fix include sequence in 4xx_pcie.c
+
+ This patch now moves common.h to the top of the inlcude list. This
+ is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
+ the phys_size_t/phys_addr_t are defined to the correct size in this
+ driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 01:16:00 2008 +0200
+
+ Fix some more print() format errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fdd70d1921b87287d9a99d1be99bc35226c2b412
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 10 20:57:54 2008 +0200
+
+ MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Thu Jun 5 11:06:29 2008 +0400
+
+ DataFlash AT45DB021 support
+
+ Some boards based on AT91SAM926X-EK use smaller DF chips to keep
+ bootstrap, u-boot and its environment, using NAND or other external
+ storage for kernel and rootfs. This patch adds support for
+ small 1024x263 chip.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jul 10 14:00:15 2008 -0500
+
+ silence misc printf formatting compiler warnings
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Thu Jul 10 14:47:09 2008 +0200
+
+ USB: shutdown USB before booting
+
+ This patch fixes a potentially serious issue related to USB which was
+ discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
+ ARM920T. Martin wrote:
+
+ Turn off USB to prevent the host controller from writing to the
+ SDRAM while Linux is booting. This could happen, because the HCCA
+ (Host Controller Communication Area) lies within the SDRAM and the
+ host controller writes continously to this area (as busmaster!), for
+ example to increase the HccaFrameNumber variable, which happens
+ every 1 ms.
+
+ This is a slightly modified version of the patch in order to shutdown
+ USB when booting on all architectures.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Thu May 29 14:23:25 2008 -0400
+
+ Configuration changes for ADS5121 Rev 3
+
+ ADS5121 Rev 3 board is now the default config
+
+ config targets are now
+
+ ads5121_config
+ Rev 3 board with
+ PCI
+ M41T62 on board RTC
+ 512MB DRAM
+
+ ads5121_rev2_config
+ Rev 2 board with
+ No PCI
+ 256MB DRAM
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Thu May 29 15:37:21 2008 -0400
+
+ Consolidate ADS5121 IO Pin configuration
+
+ Consolidate ADS5121 IO Pin configuration to one file
+ board/ads5121/iopin.c.
+
+ Remove pin config from cpu/mpc512x/fec.c
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
+Author: Christian Eggers <christian@p2400.wgnetz.xx>
+Date: Fri Jun 27 19:46:51 2008 +0200
+
+ Fix "usb part" command
+
+ Only print partition for selected device if user supplied the <dev>
+ arg with the "usb part [dev]" command.
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit cc83b27217f7380041fea386ddb6d6d9b261617d
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 00:58:05 2008 +0800
+
+ fix USB devices with multiple configurations
+
+ This patch fixes bugs in usbdcore*.c related to the use of devices
+ with multiple configurations.
+
+ The original code made mistakes about the meaning of configuration value and
+ configuration index, and the resulting off-by-one errors resulted in:
+
+ * SET_CONFIGURATION always selected the first configuration, no matter what
+ wValue is being passed.
+ * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
+ configuration (index 0).
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 06c53beae1a726e707971c555613f09b270a2461
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 10 13:16:09 2008 +0200
+
+ Fix some more print() format errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
+Author: Christian Eggers <christian@p2400.wgnetz.xx>
+Date: Fri Jun 27 19:46:51 2008 +0200
+
+ Fix "usb part" command
+
+ Only print partition for selected device if user supplied the <dev>
+ arg with the "usb part [dev]" command.
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 00:58:05 2008 +0800
+
+ fix USB devices with multiple configurations
+
+ This patch fixes bugs in usbdcore*.c related to the use of devices
+ with multiple configurations.
+
+ The original code made mistakes about the meaning of configuration value and
+ configuration index, and the resulting off-by-one errors resulted in:
+
+ * SET_CONFIGURATION always selected the first configuration, no matter what
+ wValue is being passed.
+ * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
+ configuration (index 0).
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit e870690bdca154943ecadd5212d2d59c1b9d391b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 10:10:54 2008 +0200
+
+ MTD/NAND: Fix printf format warning in nand code
+
+ This patch fixes NAND related printf format warning. Those warnings are
+ now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+ [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
+ really helpful.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 10:00:45 2008 +0200
+
+ rtc: Fix printf format warning in m41t60.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 8 12:01:47 2008 +0200
+
+ pci: Move PCI device configuration check into a separate weak function
+
+ This patch moves the check, if a device should be skipped in PCI PNP
+ configuration into the function pci_skip_dev(). This function is defined
+ as weak so that it can be overwritten by a platform specific one if
+ needed. The check if the device should get printed in the PCI summary upon
+ bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
+ pci_print_dev() which is also defined as weak too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b002144e1dc21374b1ef5281fe6b5d014af96650
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 09:58:06 2008 +0200
+
+ ppc4xx: Fix printf format warnings now visible with the updated format check
+
+ This patch fixes ppc4xx related printf format warning. Those warnings are
+ now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+ [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
+ really helpful.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 9 17:33:57 2008 +0200
+
+ ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
+
+ Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ To support such configurations, we "only" map the first 2GB via the TLB's. We
+ need some free virtual address space for the remaining peripherals like, SoC
+ devices, FLASH etc.
+
+ Note that ECC is currently not supported on configurations with more than 2GB
+ SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ the ECC parity byte of the remaining area can't be written.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf1c2ed91df26903b956948f37f82de9e1158a89
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jun 14 17:02:49 2008 -0400
+
+ ppc4xx: Remove implementation of testdram() from Korat board support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jun 14 16:53:02 2008 -0400
+
+ ppc4xx: Update and add FDT to Korat board support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4188f0491886b3b486164e819c0a83fdb97efd7d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 10 01:13:30 2008 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 8915f1189c1d29d8be7f4de325702d90a8988219
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Wed Jul 9 17:50:45 2008 -0400
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue May 13 11:50:36 2008 +0800
+
+ Feed the watchdog in u-boot for 8610 board.
+
+ The watchdog on 8610 board is enabled by setting sw[6]
+ to on. Once enabled, the watchdog can not be disabled
+ by software. So feed the dog in u-boot is necessary for
+ normal operation.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Wed Jun 18 12:10:33 2008 -0400
Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
Acked-by: Felix Radensky <felix@embedded-sol.com>
+commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 1 17:03:19 2008 +0200
+
+ ppc4xx: Fix 460EX/GT PCIe port initialization
+
+ This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
+ configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
+ this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit b571afde0295b007a45055ee49f8822c753a5651
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Jun 7 12:29:52 2008 +0200
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
+commit a036b0443657fe0f4773786de9092251869f08ac
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 19 01:45:50 2008 -0500
+
+ MPC8610HPCD: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 19 01:45:27 2008 -0500
+
+ MPC8641HPCN: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
Author: Stefan Roese <sr@denx.de>
Date: Mon Jun 16 10:40:02 2008 +0200
N: Andre Schwarz
E: andre.schwarz@matrix-vision.de
-D: Support for Matrix Vision boards (MVBLM7)
+D: Support for Matrix Vision boards (MVBLM7/MVBC_P)
N: Robert Schwebel
E: r.schwebel@pengutronix.de
# PowerPC Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Greg Allen <gallen@arlut.utexas.edu>
- UTX8245 MPC8245
+ UTX8245 MPC8245
Pantelis Antoniou <panto@intracom.gr>
- NETVIA MPC8xx
+ NETVIA MPC8xx
Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- cpci5200 MPC5200
- mecp5200 MPC5200
- pf5200 MPC5200
+ cpci5200 MPC5200
+ mecp5200 MPC5200
+ pf5200 MPC5200
- CPCI750 PPC750FX/GX
+ CPCI750 PPC750FX/GX
Yuli Barcohen <yuli@arabellasw.com>
- Adder MPC87x/MPC852T
- ep8248 MPC8248
- ISPAN MPC8260
- MPC8260ADS MPC826x/MPC827x/MPC8280
- Rattler MPC8248
- ZPC1900 MPC8265
+ Adder MPC87x/MPC852T
+ ep8248 MPC8248
+ ISPAN MPC8260
+ MPC8260ADS MPC826x/MPC827x/MPC8280
+ Rattler MPC8248
+ ZPC1900 MPC8265
Michael Barkowski <michael.barkowski@freescale.com>
- MPC8323ERDB MPC8323
+ MPC8323ERDB MPC8323
Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
- sacsng MPC8260
+ sacsng MPC8260
Oliver Brown <obrown@adventnetworks.com>
- gw8260 MPC8260
+ gw8260 MPC8260
Conn Clark <clark@esteem.com>
- ESTEEM192E MPC8xx
+ ESTEEM192E MPC8xx
Joe D'Abbraccio <ljd015@freescale.com>
- MPC837xERDB MPC837x
+ MPC837xERDB MPC837x
Kári DavÃðsson <kd@flaga.is>
- FLAGADM MPC823
+ FLAGADM MPC823
Torsten Demke <torsten.demke@fci.com>
- eXalion MPC824x
+ eXalion MPC824x
Wolfgang Denk <wd@denx.de>
- IceCube_5100 MGT5100
- IceCube_5200 MPC5200
-
- AMX860 MPC860
- ETX094 MPC850
- FPS850L MPC850
- FPS860L MPC860
- ICU862 MPC862
- IP860 MPC860
- IVML24 MPC860
- IVML24_128 MPC860
- IVML24_256 MPC860
- IVMS8 MPC860
- IVMS8_128 MPC860
- IVMS8_256 MPC860
- LANTEC MPC850
- LWMON MPC823
- NC650 MPC852
- R360MPI MPC823
- RMU MPC850
- RRvision MPC823
- SM850 MPC850
- SPD823TS MPC823
- TQM823L MPC823
- TQM823L_LCD MPC823
- TQM850L MPC850
- TQM855L MPC855
- TQM860L MPC860
- TQM860L_FEC MPC860
- c2mon MPC855
- hermes MPC860
- lwmon MPC823
- pcu_e MPC855
-
- CU824 MPC8240
- Sandpoint8240 MPC8240
- SL8245 MPC8245
-
- ATC MPC8250
- PM825 MPC8250
-
- TQM8255 MPC8255
-
- CPU86 MPC8260
- PM826 MPC8260
- TQM8260 MPC8260
-
- P3G4 MPC7410
-
- PCIPPC2 MPC750
- PCIPPC6 MPC750
-
- EXBITGEN PPC405GP
+ IceCube_5100 MGT5100
+ IceCube_5200 MPC5200
+
+ AMX860 MPC860
+ ETX094 MPC850
+ FPS850L MPC850
+ FPS860L MPC860
+ ICU862 MPC862
+ IP860 MPC860
+ IVML24 MPC860
+ IVML24_128 MPC860
+ IVML24_256 MPC860
+ IVMS8 MPC860
+ IVMS8_128 MPC860
+ IVMS8_256 MPC860
+ LANTEC MPC850
+ LWMON MPC823
+ NC650 MPC852
+ R360MPI MPC823
+ RMU MPC850
+ RRvision MPC823
+ SM850 MPC850
+ SPD823TS MPC823
+ TQM823L MPC823
+ TQM823L_LCD MPC823
+ TQM850L MPC850
+ TQM855L MPC855
+ TQM860L MPC860
+ TQM860L_FEC MPC860
+ c2mon MPC855
+ hermes MPC860
+ lwmon MPC823
+ pcu_e MPC855
+
+ CU824 MPC8240
+ Sandpoint8240 MPC8240
+ SL8245 MPC8245
+
+ ATC MPC8250
+ PM825 MPC8250
+
+ TQM8255 MPC8255
+
+ CPU86 MPC8260
+ PM826 MPC8260
+ TQM8260 MPC8260
+
+ P3G4 MPC7410
+
+ PCIPPC2 MPC750
+ PCIPPC6 MPC750
+
+ EXBITGEN PPC405GP
Jon Diekema <jon.diekema@smiths-aerospace.com>
- sbc8260 MPC8260
+ sbc8260 MPC8260
Dave Ellis <DGE@sixnetio.com>
- SXNI855T MPC8xx
+ SXNI855T MPC8xx
Thomas Frieden <ThomasF@hyperion-entertainment.com>
- AmigaOneG3SE MPC7xx
+ AmigaOneG3SE MPC7xx
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- ADCIOP IOP480 (PPC401)
- APC405 PPC405GP
- AR405 PPC405GP
- ASH405 PPC405EP
- CANBT PPC405CR
- CPCI2DP PPC405GP
- CPCI405 PPC405GP
- CPCI4052 PPC405GP
- CPCI405AB PPC405GP
- CPCI405DT PPC405GP
- CPCIISER4 PPC405GP
- DASA_SIM IOP480 (PPC401)
- DP405 PPC405EP
- DU405 PPC405GP
- DU440 PPC440EPx
- G2000 PPC405EP
- HH405 PPC405EP
- HUB405 PPC405EP
- OCRTC PPC405GP
- ORSG PPC405GP
- PCI405 PPC405GP
- PLU405 PPC405EP
- PMC405 PPC405GP
- PMC440 PPC440EPx
- VOH405 PPC405EP
- VOM405 PPC405EP
- WUH405 PPC405EP
- CMS700 PPC405EP
+ ADCIOP IOP480 (PPC401)
+ APC405 PPC405GP
+ AR405 PPC405GP
+ ASH405 PPC405EP
+ CANBT PPC405CR
+ CPCI2DP PPC405GP
+ CPCI405 PPC405GP
+ CPCI4052 PPC405GP
+ CPCI405AB PPC405GP
+ CPCI405DT PPC405GP
+ CPCIISER4 PPC405GP
+ DASA_SIM IOP480 (PPC401)
+ DP405 PPC405EP
+ DU405 PPC405GP
+ DU440 PPC440EPx
+ G2000 PPC405EP
+ HH405 PPC405EP
+ HUB405 PPC405EP
+ OCRTC PPC405GP
+ ORSG PPC405GP
+ PCI405 PPC405GP
+ PLU405 PPC405EP
+ PMC405 PPC405GP
+ PMC440 PPC440EPx
+ VOH405 PPC405EP
+ VOM405 PPC405EP
+ WUH405 PPC405EP
+ CMS700 PPC405EP
Niklaus Giger <niklaus.giger@netstal.com>
- HCU4 PPC405GPr
- MCU25 PPC405GPr
- HCU5 PPC440EPx
+ HCU4 PPC405GPr
+ MCU25 PPC405GPr
+ HCU5 PPC440EPx
Frank Gottschling <fgottschling@eltec.de>
- MHPC MPC8xx
+ MHPC MPC8xx
- BAB7xx MPC740/MPC750
+ BAB7xx MPC740/MPC750
Wolfgang Grandegger <wg@denx.de>
- CCM MPC855
+ CCM MPC855
- PN62 MPC8240
-
- IPHASE4539 MPC8260
- SCM MPC8260
+ PN62 MPC8240
+ IPHASE4539 MPC8260
+ SCM MPC8260
Howard Gray <mvsensor@matrix-vision.de>
- MVS1 MPC823
+ MVS1 MPC823
Joe Hamman <joe.hamman@embeddedspecialties.com>
- sbc8548 MPC8548
- sbc8641d MPC8641D
+ sbc8548 MPC8548
+ sbc8641d MPC8641D
Klaus Heydeck <heydeck@kieback-peter.de>
- KUP4K MPC855
- KUP4X MPC859
+ KUP4K MPC855
+ KUP4X MPC859
Gary Jennejohn <garyj@denx.de>
- quad100hd PPC405EP
+ quad100hd PPC405EP
Murray Jensen <Murray.Jensen@csiro.au>
- cogent_mpc8xx MPC8xx
+ cogent_mpc8xx MPC8xx
- cogent_mpc8260 MPC8260
- hymod MPC8260
+ cogent_mpc8260 MPC8260
+ hymod MPC8260
Larry Johnson <lrj@acm.org>
- korat PPC440EPx
+ korat PPC440EPx
Brad Kemp <Brad.Kemp@seranoa.com>
- ppmc8260 MPC8260
+ ppmc8260 MPC8260
Sangmoon Kim <dogoil@etinsys.com>
- debris MPC8245
- KVME080 MPC8245
+ debris MPC8245
+ KVME080 MPC8245
Thomas Lange <thomas@corelatus.se>
- GTH MPC860
+ GTH MPC860
Robert Lazarski <robertlazarski@gmail.com>
- ATUM8548 MPC8548
+ ATUM8548 MPC8548
The LEOX team <team@leox.org>
- ELPT860 MPC860T
+ ELPT860 MPC860T
Dave Liu <daveliu@freescale.com>
- MPC8315ERDB MPC8315
- MPC832XEMDS MPC832x
- MPC8360EMDS MPC8360
- MPC837XEMDS MPC837x
+ MPC8315ERDB MPC8315
+ MPC832XEMDS MPC832x
+ MPC8360EMDS MPC8360
+ MPC837XEMDS MPC837x
Nye Liu <nyet@zumanetworks.com>
- ZUMA MPC7xx_74xx
+ ZUMA MPC7xx_74xx
Jon Loeliger <jdl@freescale.com>
- MPC8540ADS MPC8540
- MPC8560ADS MPC8560
- MPC8541CDS MPC8541
- MPC8555CDS MPC8555
+ MPC8540ADS MPC8540
+ MPC8560ADS MPC8560
+ MPC8541CDS MPC8541
+ MPC8555CDS MPC8555
- MPC8641HPCN MPC8641D
+ MPC8641HPCN MPC8641D
Dan Malek <dan@embeddedalley.com>
- stxgp3 MPC85xx
- stxssa MPC85xx
- stxxtc MPC8xx
+ stxgp3 MPC85xx
+ stxssa MPC85xx
+ stxxtc MPC8xx
Eran Man <eran@nbase.co.il>
- EVB64260_750CX MPC750CX
+ EVB64260_750CX MPC750CX
Andrea "llandre" Marson <andrea.marson@dave-tech.it>
Reinhard Meyer <r.meyer@emk-elektronik.de>
- TOP860 MPC860T
- TOP5200 MPC5200
+ TOP860 MPC860T
+ TOP5200 MPC5200
Tolunay Orkun <torkun@nextio.com>
- csb272 PPC405GP
- csb472 PPC405GP
+ csb272 PPC405GP
+ csb472 PPC405GP
John Otken <jotken@softadvances.com>
- luan PPC440SP
- taihu PPC405EP
+ luan PPC440SP
+ taihu PPC405EP
Keith Outwater <Keith_Outwater@mvis.com>
- GEN860T MPC860T
- GEN860T_SC MPC860T
+ GEN860T MPC860T
+ GEN860T_SC MPC860T
Frank Panno <fpanno@delphintech.com>
- ep8260 MPC8260
+ ep8260 MPC8260
Denis Peter <d.peter@mpl.ch>
- MIP405 PPC4xx
- PIP405 PPC4xx
+ MIP405 PPC4xx
+ PIP405 PPC4xx
Kim Phillips <kim.phillips@freescale.com>
- MPC8349EMDS MPC8349
+ MPC8349EMDS MPC8349
Daniel Poirot <dan.poirot@windriver.com>
- sbc8240 MPC8240
- sbc405 PPC405GP
+ sbc8240 MPC8240
+ sbc405 PPC405GP
Stefan Roese <sr@denx.de>
- P3M7448 MPC7448
-
- uc100 MPC857
-
- TQM85xx MPC8540/8541/8555/8560
-
- acadia PPC405EZ
- alpr PPC440GX
- bamboo PPC440EP
- bunbinga PPC405EP
- canyonlands PPC460EX
- ebony PPC440GP
- glacier PPC460GT
- haleakala PPC405EXr
- katmai PPC440SPe
- kilauea PPC405EX
- lwmon5 PPC440EPx
- makalu PPC405EX
- ocotea PPC440GX
- p3p440 PPC440GP
- pcs440ep PPC440EP
- rainier PPC440GRx
- sequoia PPC440EPx
- sycamore PPC405GPr
- taishan PPC440GX
- walnut PPC405GP
- yellowstone PPC440GR
- yosemite PPC440EP
- zeus PPC405EP
-
- P3M750 PPC750FX/GX/GL
+ P3M7448 MPC7448
+
+ uc100 MPC857
+
+ TQM85xx MPC8540/8541/8555/8560
+
+ acadia PPC405EZ
+ alpr PPC440GX
+ bamboo PPC440EP
+ bunbinga PPC405EP
+ canyonlands PPC460EX
+ ebony PPC440GP
+ glacier PPC460GT
+ haleakala PPC405EXr
+ katmai PPC440SPe
+ kilauea PPC405EX
+ lwmon5 PPC440EPx
+ makalu PPC405EX
+ ocotea PPC440GX
+ p3p440 PPC440GP
+ pcs440ep PPC440EP
+ rainier PPC440GRx
+ sequoia PPC440EPx
+ sycamore PPC405GPr
+ taishan PPC440GX
+ walnut PPC405GP
+ yellowstone PPC440GR
+ yosemite PPC440EP
+ zeus PPC405EP
+
+ P3M750 PPC750FX/GX/GL
Yusdi Santoso <yusdi_santoso@adaptec.com>
Travis Sawyer (travis.sawyer@sandburst.com>
- KAREF PPC440GX
- METROBOX PPC440GX
- XPEDITE1K PPC440GX
+ KAREF PPC440GX
+ METROBOX PPC440GX
+ XPEDITE1K PPC440GX
Heiko Schocher <hs@denx.de>
- ids8247 MPC8247
- jupiter MPC5200
- mgcoge MPC8247
- mgsuvd MPC852
- municse MPC5200
- sc3 PPC405GP
- uc101 MPC5200
+ ids8247 MPC8247
+ jupiter MPC5200
+ mgcoge MPC8247
+ mgsuvd MPC852
+ municse MPC5200
+ sc3 PPC405GP
+ uc101 MPC5200
Peter De Schrijver <p2@mind.be>
- ML2 PPC4xx
+ ML2 PPC4xx
Andre Schwarz <andre.schwarz@matrix-vision.de>
- mvblm7 MPC8343
+ mvbc_p MPC5200
+ mvblm7 MPC8343
Timur Tabi <timur@freescale.com>
- MPC8349E-mITX MPC8349
- MPC8349E-mITX-GP MPC8349
+ MPC8349E-mITX MPC8349
+ MPC8349E-mITX-GP MPC8349
Erik Theisen <etheisen@mindspring.com>
- W7OLMC PPC4xx
- W7OLMG PPC4xx
+ W7OLMC PPC4xx
+ W7OLMG PPC4xx
Jim Thompson <jim@musenki.com>
- MUSENKI MPC8245/8241
- Sandpoint8245 MPC8245
+ MUSENKI MPC8245/8241
+ Sandpoint8245 MPC8245
Rune Torgersen <runet@innovsys.com>
- MPC8266ADS MPC8266
+ MPC8266ADS MPC8266
David Updegraff <dave@cray.com>
- CRAYL1 PPC4xx
+ CRAYL1 PPC4xx
Anton Vorontsov <avorontsov@ru.mvista.com>
- MPC8360ERDK MPC8360
+ MPC8360ERDK MPC8360
Josef Wagner <Wagner@Microsys.de>
- CPC45 MPC8245
- PM520 MPC5200
+ CPC45 MPC8245
+ PM520 MPC5200
Stephen Williams <steve@icarus.com>
- JSE PPC405GPr
+ JSE PPC405GPr
John Zhan <zhanz@sinovee.com>
- svm_sc8xx MPC8xx
+ svm_sc8xx MPC8xx
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- linkstation MPC8241
+ linkstation MPC8241
-------------------------------------------------------------------------
Unknown / orphaned boards:
- ADS860 MPC8xx
- FADS823 MPC8xx
- FADS850SAR MPC8xx
- FADS860T MPC8xx
- GENIETV MPC8xx
- IAD210 MPC8xx
- MBX MPC8xx
- MBX860T MPC8xx
- NX823 MPC8xx
- RPXClassic MPC8xx
- RPXlite MPC8xx
+ ADS860 MPC8xx
+ FADS823 MPC8xx
+ FADS850SAR MPC8xx
+ FADS860T MPC8xx
+ GENIETV MPC8xx
+ IAD210 MPC8xx
+ MBX MPC8xx
+ MBX860T MPC8xx
+ NX823 MPC8xx
+ RPXClassic MPC8xx
+ RPXlite MPC8xx
- ERIC PPC4xx
+ ERIC PPC4xx
- MOUSSE MPC824x
+ MOUSSE MPC824x
- RPXsuper MPC8260
- rsdproto MPC8260
+ RPXsuper MPC8260
+ rsdproto MPC8260
- EVB64260 MPC7xx_74xx
+ EVB64260 MPC7xx_74xx
#########################################################################
# ARM Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Rowel Atienza <rowel@diwalabs.com>
- armadillo ARM720T
+ armadillo ARM720T
Rishi Bhattacharya <rishi@ti.com>
- omap5912osk ARM926EJS
+ omap5912osk ARM926EJS
Cliff Brake <cliff.brake@gmail.com>
- pxa255_idp xscale
+ pxa255_idp xscale
Rick Bronson <rick@efn.org>
- AT91RM9200DK at91rm9200
+ AT91RM9200DK at91rm9200
George G. Davis <gdavis@mvista.com>
- assabet SA1100
- gcplus SA1100
+ assabet SA1100
+ gcplus SA1100
Thomas Elste <info@elste.org>
- modnet50 ARM720T (NET+50)
+ modnet50 ARM720T (NET+50)
Peter Figuli <peposh@etc.sk>
- wepep250 xscale
+ wepep250 xscale
Marius Gröger <mag@sysgo.de>
- impa7 ARM720T (EP7211)
- ep7312 ARM720T (EP7312)
+ impa7 ARM720T (EP7211)
+ ep7312 ARM720T (EP7312)
Kshitij Gupta <kshitij@ti.com>
- omap1510inn ARM925T
- omap1610inn ARM926EJS
-
-Kyle Harris <kharris@nexus-tech.net>
-
- lubbock xscale
- cradle xscale
- ixdp425 xscale
+ omap1510inn ARM925T
+ omap1610inn ARM926EJS
Gary Jennejohn <gj@denx.de>
- smdk2400 ARM920T
- trab ARM920T
+ smdk2400 ARM920T
+ trab ARM920T
Konstantin Kletschke <kletschke@synertronixx.de>
- scb9328 ARM920T
+ scb9328 ARM920T
Nishant Kamat <nskamat@ti.com>
- omap1610h2 ARM926EJS
+ omap1610h2 ARM926EJS
Sergey Kubushyn <ksi@koi8.net>
- DV-EVM ARM926EJS
- SONATA ARM926EJS
- SCHMOOGIE ARM926EJS
+ DV-EVM ARM926EJS
+ SONATA ARM926EJS
+ SCHMOOGIE ARM926EJS
Prakash Kumar <prakash@embedx.com>
- cerf250 xscale
+ cerf250 xscale
David Müller <d.mueller@elsoft.ch>
- smdk2410 ARM920T
- VCMA9 ARM920T
+ smdk2410 ARM920T
+ VCMA9 ARM920T
Rolf Offermanns <rof@sysgo.de>
- shannon SA1100
+ shannon SA1100
Peter Pearse <peter.pearse@arm.com>
- integratorcp All current ARM supplied &
- supported core modules
- -see http://www.arm.com
- /products/DevTools
- /Hardware_Platforms.html
- versatile ARM926EJ-S
- versatile ARM926EJ-S
+ integratorcp All current ARM supplied & supported core modules
+ -see http://www.arm.com/products/DevTools/Hardware_Platforms.html
+ versatile ARM926EJ-S
+ versatile ARM926EJ-S
Dave Peverley <dpeverley@mpc-data.co.uk>
- omap730p2 ARM926EJS
+ omap730p2 ARM926EJS
Stelian Pop <stelian.pop@leadtechdesign.com>
- at91cap9adk ARM926EJS (AT91CAP9 SoC)
- at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
- at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
- at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
- at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
+ at91cap9adk ARM926EJS (AT91CAP9 SoC)
+ at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
+ at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
+ at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
+ at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Stefan Roese <sr@denx.de>
- ixdpg425 xscale
- pdnb3 xscale
- scpu xscale
+ ixdpg425 xscale
+ pdnb3 xscale
+ scpu xscale
Robert Schwebel <r.schwebel@pengutronix.de>
- csb226 xscale
- innokom xscale
+ csb226 xscale
+ innokom xscale
Andrea Scian <andrea.scian@dave-tech.it>
- B2 ARM7TDMI (S3C44B0X)
+ B2 ARM7TDMI (S3C44B0X)
Greg Ungerer <greg.ungerer@opengear.com>
- cm4008 ks8695p
- cm4116 ks8695p
- cm4148 ks8695p
+ cm4008 ks8695p
+ cm4116 ks8695p
+ cm4148 ks8695p
Richard Woodruff <r-woodruff2@ti.com>
- omap2420h4 ARM1136EJS
+ omap2420h4 ARM1136EJS
Kyungmin Park <kyungmin.park@samsung.com>
- apollon ARM1136EJS
+ apollon ARM1136EJS
Alex Züpke <azu@sysgo.de>
- lart SA1100
- dnp1110 SA1110
+ lart SA1100
+ dnp1110 SA1110
Michael Schwingen <michael@schwingen.org>
- actux1 xscale
- actux2 xscale
- actux3 xscale
- actux4 xscale
+ actux1 xscale
+ actux2 xscale
+ actux3 xscale
+ actux4 xscale
+
+-------------------------------------------------------------------------
+
+Unknown / orphaned boards:
+ Board CPU Last known maintainer / Comment
+.........................................................................
+ cradle xscale Kyle Harris <kharris@nexus-tech.net> / dead address
+ ixdp425 xscale Kyle Harris <kharris@nexus-tech.net> / dead address
+ lubbock xscale Kyle Harris <kharris@nexus-tech.net> / dead address
#########################################################################
# x86 Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Daniel Engström <daniel@omicron.se>
- sc520_cdp x86
+ sc520_cdp x86
#########################################################################
# MIPS Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Wolfgang Denk <wd@denx.de>
- incaip MIPS32 4Kc
- purple MIPS64 5Kc
+ incaip MIPS32 4Kc
+ purple MIPS64 5Kc
Thomas Lange <thomas@corelatus.se>
- dbau1x00 MIPS32 Au1000
- gth2 MIPS32 Au1000
+ dbau1x00 MIPS32 Au1000
+ gth2 MIPS32 Au1000
Vlad Lungu <vlad.lungu@windriver.com>
- qemu_mips MIPS32
+ qemu_mips MIPS32
#########################################################################
# Nios-32 Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Stephan Linz <linz@li-pro.net>
- DK1S10 Nios-32
- ADNPESC1 Nios-32
+ DK1S10 Nios-32
+ ADNPESC1 Nios-32
Scott McNutt <smcnutt@psyent.com>
- DK1C20 Nios-32
+ DK1C20 Nios-32
#########################################################################
# Nios-II Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Scott McNutt <smcnutt@psyent.com>
- PCI5441 Nios-II
- PK1C20 Nios-II
- EP1C20 Nios-II
- EP1S10 Nios-II
- EP1S40 Nios-II
+ PCI5441 Nios-II
+ PK1C20 Nios-II
+ EP1C20 Nios-II
+ EP1S10 Nios-II
+ EP1S40 Nios-II
#########################################################################
# MicroBlaze Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Yasushi Shoji <yashi@atmark-techno.com>
- SUZAKU MicroBlaze
+ SUZAKU MicroBlaze
Michal Simek <monstr@monstr.eu>
- ML401 MicroBlaze
- XUPV2P MicroBlaze
+ ML401 MicroBlaze
+ XUPV2P MicroBlaze
#########################################################################
# Coldfire Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- TASREG MCF5249
+ TASREG MCF5249
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- M52277EVB mcf5227x
- M5235EVB mcf52x2
- M5329EVB mcf532x
- M5373EVB mcf532x
- M54455EVB mcf5445x
- M5475EVB mcf547x_8x
- M5485EVB mcf547x_8x
+ M52277EVB mcf5227x
+ M5235EVB mcf52x2
+ M5329EVB mcf532x
+ M5373EVB mcf532x
+ M54455EVB mcf5445x
+ M5475EVB mcf547x_8x
+ M5485EVB mcf547x_8x
Hayden Fraser <Hayden.Fraser@freescale.com>
- M5253EVBE mcf52x2
+ M5253EVBE mcf52x2
#########################################################################
# AVR32 Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Haavard Skinnemoen <hskinnemoen@atmel.com>
- ATSTK1000 AT32AP7xxx
- ATSTK1002 AT32AP7000
- ATSTK1003 AT32AP7001
- ATSTK1004 AT32AP7002
- ATSTK1006 AT32AP7000
- ATNGW100 AT32AP7000
+ ATSTK1000 AT32AP7xxx
+ ATSTK1002 AT32AP7000
+ ATSTK1003 AT32AP7001
+ ATSTK1004 AT32AP7002
+ ATSTK1006 AT32AP7000
+ ATNGW100 AT32AP7000
#########################################################################
# SuperH Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- MS7750SE SH7750
- MS7722SE SH7722
- R7780MP SH7780
- R2DPlus SH7751R
- SH7763RDP SH7763
+ MS7750SE SH7750
+ MS7722SE SH7722
+ R7780MP SH7780
+ R2DPlus SH7751R
+ SH7763RDP SH7763
Mark Jonas <mark.jonas@de.bosch.com>
- mpr2 SH7720
+ mpr2 SH7720
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- MS7720SE SH7720
+ MS7720SE SH7720
Yusuke Goda <goda.yusuke@renesas.com>
- MIGO-R SH7722
+ MIGO-R SH7722
#########################################################################
# Blackfin Systems: #
# #
# Maintainer Name, Email Address #
-# Board CPU #
+# Board CPU #
#########################################################################
Mike Frysinger <vapier@gentoo.org>
Blackfin Team <u-boot-devel@blackfin.uclinux.org>
- BF533-EZKIT BF533
- BF533-STAMP BF533
- BF537-STAMP BF537
- BF561-EZKIT BF561
+ BF533-EZKIT BF533
+ BF533-STAMP BF533
+ BF537-STAMP BF537
+ BF561-EZKIT BF561
#########################################################################
# End of MAINTAINERS list #
mecp5200 \
motionpro \
munices \
+ MVBC_P \
o2dnt \
pf5200 \
PM520 \
#########################################################################
LIST_ARM9=" \
- at91cap9adk \
- at91rm9200dk \
- at91sam9260ek \
- at91sam9261ek \
- at91sam9263ek \
- at91sam9rlek \
- cmc_pu2 \
ap920t \
ap922_XA10 \
ap926ejs \
cp926ejs \
cp946es \
cp966 \
- csb637 \
- kb9202 \
lpd7a400 \
- m501sk \
- mp2usb \
mx1ads \
mx1fs2 \
netstar \
${LIST_ARM9} \
${LIST_ARM10} \
${LIST_ARM11} \
+ ${LIST_at91} \
${LIST_pxa} \
${LIST_ixp} \
"
M52277EVB \
M5235EVB \
M5249EVB \
- M5253EVB \
+ M5253EVBE \
M5271EVB \
M5272C3 \
M5275EVB \
VERSION = 1
PATCHLEVEL = 3
-SUBLEVEL = 3
-EXTRAVERSION =
+SUBLEVEL = 4
+EXTRAVERSION = -rc1
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
BC3450_config: unconfig
@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
+cm5200_config: unconfig
+ @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
+
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
-v38b_config: unconfig
- @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
-
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
mecp5200_config: unconfig
@$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
+motionpro_config: unconfig
+ @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
+
munices_config: unconfig
@$(MKCONFIG) munices ppc mpc5xxx munices
+MVBC_P_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/mvbc_p
+ @ >$(obj)include/config.h
+ @[ -z "$(findstring MVBC_P,$@)" ] || \
+ { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
+ @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
+
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
smmaco4_config: unconfig
@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
-cm5200_config: unconfig
- @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
-
spieval_config: unconfig
@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
+
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
-motionpro_config: unconfig
- @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
+v38b_config: unconfig
+ @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
#########################################################################
## MPC512x Systems
#########################################################################
+
ads5121_config \
-ads5121_PCI_config \
- : unconfig
+ads5121_rev2_config \
+ : unconfig
@mkdir -p $(obj)include
- @if [ "$(findstring _PCI_,$@)" ] ; then \
- echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- $(XECHO) "... with PCI enabled" ; \
+ @if [ "$(findstring rev2,$@)" ] ; then \
+ echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+CMS700_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
+
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
+sc3_config:unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-sc3_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
-
taihu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
VOM405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
-CMS700_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
-
W7OLMC_config \
W7OLMG_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
M5282EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
-TASREG_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
-
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
fi
@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+TASREG_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
+
#########################################################################
## MPC83xx Systems
#########################################################################
PCIPPC6_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
-ZUMA_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
-
ppmc7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
+ZUMA_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+
#========================================================================
# ARM
#========================================================================
kb9202_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
-mp2usb_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
-
m501sk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
+mp2usb_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+
#########################################################################
## Atmel ARM926EJ-S Systems
#########################################################################
cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
+davinci_dvevm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
+
+davinci_schmoogie_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
+
+davinci_sffsdr_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
+
+davinci_sonata_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
-omap5912osk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
-
-davinci_dvevm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
-
-davinci_schmoogie_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
-
-davinci_sffsdr_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
-
-davinci_sonata_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
-
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
+omap5912osk_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
+
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
omap730p2_config \
VCMA9_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
-#========================================================================
+#########################################################################
# ARM supplied Versatile development boards
-#========================================================================
+#########################################################################
+
+cm4008_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
+
+cm41xx_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
+
versatile_config \
versatileab_config \
versatilepb_config : unconfig
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
-cm4008_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
-
-cm41xx_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
-
#########################################################################
## S3C44B0 Systems
#########################################################################
#########################################################################
## ARM1136 Systems
#########################################################################
-omap2420h4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
apollon_config : unconfig
@mkdir -p $(obj)include
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
+omap2420h4_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+
#========================================================================
# i386
#========================================================================
#########################################################################
## MIPS32 AU1X00
#########################################################################
+
dbau1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
+gth2_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a gth2 mips mips gth2
+
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
-gth2_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
- @$(MKCONFIG) -a gth2 mips mips gth2
-
-qemu_mips_config: unconfig
+qemu_mips_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
## Nios32
#########################################################################
+ADNPESC1_DNPEVA2_base_32_config \
+ADNPESC1_base_32_config \
+ADNPESC1_config: unconfig
+ @mkdir -p $(obj)include
+ @[ -z "$(findstring _DNPEVA2,$@)" ] || \
+ { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... DNP/EVA2 configuration" ; \
+ }
+ @[ -z "$(findstring _base_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... NIOS 'base_32' configuration" ; \
+ }
+ @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
+ }
+ @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
+
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
}
@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
-ADNPESC1_DNPEVA2_base_32_config \
-ADNPESC1_base_32_config \
-ADNPESC1_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _DNPEVA2,$@)" ] || \
- { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
- $(XECHO) "... DNP/EVA2 configuration" ; \
- }
- @[ -z "$(findstring _base_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'base_32' configuration" ; \
- }
- @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
-
#########################################################################
## Nios-II
#########################################################################
@$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
-# MicroBlaze
-#========================================================================
-#########################################################################
## Microblaze
-#########################################################################
-suzaku_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+#========================================================================
ml401_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ML401 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
+suzaku_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+
xupv2p_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
#========================================================================
# AVR32
#========================================================================
-#########################################################################
-## AT32AP70xx
-#########################################################################
+
+atngw100_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
atstk1002_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atstk1006_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-atngw100_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
-
-#########################################################################
-#########################################################################
-#########################################################################
+#========================================================================
+# SH3 (SuperH)
+#========================================================================
#########################################################################
## sh3 (Renesas SuperH)
#########################################################################
+
mpr2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
#########################################################################
## sh4 (Renesas SuperH)
#########################################################################
+
+MigoR_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 MigoR
+
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
-MigoR_config : unconfig
+r2dplus_config : unconfig
@mkdir -p $(obj)include
- @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 MigoR
+ @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 r2dplus
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 r7780mp
-r2dplus_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 r2dplus
-
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
#========================================================================
# SPARC
#========================================================================
+
#########################################################################
## LEON3
#########################################################################
phys_size_t initdram (int board_type)
{
- int size,i;
+ int size, i;
size = 0;
- MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
- | MCFSDRAMC_DCR_RC((15 * CFG_CLK)>>4);
- #ifdef CFG_SDRAM_BASE0
-
- MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
- | MCFSDRAMC_DACR_CASL(1)
- | MCFSDRAMC_DACR_CBM(3)
- | MCFSDRAMC_DACR_PS_16);
-
- MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M
- | MCFSDRAMC_DMR_V;
-
- MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
-
- *(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
- MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
- for (i=0; i < 2000; i++)
- asm(" nop");
- mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0)
- | MCFSDRAMC_DACR_IMRS);
- *(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
- size += CFG_SDRAM_SIZE * 1024 * 1024;
- #endif
- #ifdef CFG_SDRAM_BASE1
- MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
- | MCFSDRAMC_DACR_CASL(1)
- | MCFSDRAMC_DACR_CBM(3)
- | MCFSDRAMC_DACR_PS_16;
-
- MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M
- | MCFSDRAMC_DMR_V;
-
- MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;
-
- *(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5;
- MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;
- for (i=0; i < 2000; i++)
- asm(" nop");
- MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
- *(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
- size += CFG_SDRAM_SIZE1 * 1024 * 1024;
- #endif
+ MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
+ | MCFSDRAMC_DCR_RC ((15 * CFG_CLK) >> 4);
+#ifdef CFG_SDRAM_BASE0
+
+ MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE0)
+ | MCFSDRAMC_DACR_CASL (1)
+ | MCFSDRAMC_DACR_CBM (3)
+ | MCFSDRAMC_DACR_PS_16;
+
+ MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+
+ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+
+ *(unsigned short *) (CFG_SDRAM_BASE0) = 0xA5A5;
+ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
+ for (i = 0; i < 2000; i++)
+ asm (" nop");
+ mbar_writeLong (MCFSDRAMC_DACR0,
+ mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
+ *(unsigned int *) (CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
+ size += CFG_SDRAM_SIZE * 1024 * 1024;
+#endif
+#ifdef CFG_SDRAM_BASE1
+ MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE1)
+ | MCFSDRAMC_DACR_CASL (1)
+ | MCFSDRAMC_DACR_CBM (3)
+ | MCFSDRAMC_DACR_PS_16;
+
+ MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+
+ MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;
+
+ *(unsigned short *) (CFG_SDRAM_BASE1) = 0xA5A5;
+ MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;
+
+ for (i = 0; i < 2000; i++)
+ asm (" nop");
+
+ MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
+ *(unsigned int *) (CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
+ size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+#endif
return size;
}
dest = cmf_backdoor_address(addr);
while ((cnt>=4) && (rc == ERR_OK))
{
- data =*((volatile u32 *) src);
+ data = *((volatile u32 *) src);
*(volatile u32*) dest = data;
MCFCFM_CMD = MCFCFM_CMD_PGM;
MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
dest = addr;
while ((cnt>=2) && (rc == ERR_OK))
{
- data =*((volatile u16 *) src);
+ data = *((volatile u16 *) src);
rc=amd_write_word (info,dest,data);
src +=2;
dest +=2;
}
#endif /* CFG_DISCOVER_PHY */
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{
device_t kbddev ;
char *stdinname = getenv ("stdin");
- if(isa_kbd_init()==-1)
+ if(isa_kbd_init() == -1)
return -1;
memset (&kbddev, 0, sizeof(kbddev));
strcpy(kbddev.name, DEVNAME);
int val;
unsigned char status;
- val=-1;
+ val = -1;
status = kbd_read_status();
if (status & KBD_STAT_OBF) {
val = kbd_read_input();
uhci_td_t *td,*prevtd;
for(i=0;i<8;i++) {
- prevtd=&td_int[i]; /* the first previous td is the skeleton td */
+ prevtd = &td_int[i]; /* the first previous td is the skeleton td */
link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
td=(uhci_td_t *)link; /* assign it */
/* all interrupt TDs are finally linked to the td_int[0].
busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */
- if(busdevfunc==-1) {
+ if(busdevfunc == -1) {
printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID);
return -1;
}
*/
int usb_lowlevel_stop(void)
{
- if(irqvec==-1)
+ if(irqvec == -1)
return 1;
irq_free_handler(irqvec);
irq_free_handler(0);
reset_hc();
- irqvec=-1;
+ irqvec = -1;
return 0;
}
+++ /dev/null
-#include "menu.h"
-
-#define SINGLE_BOX 0
-#define DOUBLE_BOX 1
-
-void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h);
-void video_draw_text(int x, int y, int attr, char *text);
-void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr);
-void video_restore_rect(int x, int y, int w, int h, void *save_area);
-int video_rows(void);
-int video_cols(void);
-
-#define MAX_MENU_OPTIONS 200
-
-typedef struct
-{
- int used; /* flag if this entry is used */
- int entry_x; /* Character column of the menu entry */
- int entry_y; /* Character line of the entry */
- int option_x; /* Character colum of the option (entry is same) */
-} option_data_t;
-
-option_data_t odata[MAX_MENU_OPTIONS];
-
-int normal_attr = 0x0F;
-int select_attr = 0x2F;
-int disabled_attr = 0x07;
-
-menu_t *root_menu;
-
-int menu_init (menu_t *root)
-{
- char *s;
- int i;
-
- s = getenv("menu_normal");
- if (s) normal_attr = atoi(s);
-
- s = getenv("menu_select");
- if (s) select_attr = atoi(s);
-
- s = getenv("menu_disabled");
- if (s) disabled_attr = atoi(s);
-
- for (i=0; i<MAX_MENU_OPTIONS; i++) odata[i].used = 0;
-
- root_menu = root;
-}
-
-option_data_t *menu_alloc_odata(void)
-{
- int i;
- for (int i=0; i<MAX_MENU_OPTIONS; i++)
- {
- if (odata[i].used == 0) return &odata[i];
- }
- return NULL;
-}
-
-void menu_free_odata(option_data_t *odata)
-{
- odata->used = 0;
-}
-
-void menu_layout (menu_t *menu)
-{
+++ /dev/null
-#ifndef MENU_H
-#define MENU_H
-
-/* A single menu */
-typedef void (*menu_finish_callback)(struct menu_s *menu);
-
-typedef struct menu_s {
- char *name; /* Menu name */
- int num_options; /* Number of options in this menu */
- int flags; /* Various flags - see below */
- int option_align; /* Aligns options to a field width of this much characters if != 0 */
-
- struct menu_option_s **options; /* Pointer to this menu's options */
- menu_finish_callback callback; /* Called when the menu closes */
-} menu_t;
-
-/*
- * type: Type of the option (see below)
- * name: Name to display for this option
- * help: Optional help string
- * id : optional id number
- * sys : pointer for system-specific data, init to NULL and don't touch
- */
-
-#define OPTION_PREAMBLE \
- int type; \
- char *name; \
- char *help; \
- int id; \
- void *sys;
-
-/*
- * Menu option types.
- * There are a number of different layouts for menu options depending
- * on their types. Currently there are the following possibilities:
- *
- * Submenu:
- * This entry links to a new menu.
- *
- * Boolean:
- * A simple on/off toggle entry. Booleans can be either yes/no, 0/1 or on/off.
- * Optionally, this entry can enable/disable a set of other options. An example would
- * be to enable/disable on-board USB, and if enabled give access to further options like
- * irq settings, base address etc.
- *
- * Text:
- * A single line/limited number of characters text entry box. Text can be restricted
- * to a certain charset (digits/hex digits/all/custom). Result is also available as an
- * int if numeric.
- *
- * Selection:
- * One-of-many type of selection entry. User may choose on of a set of strings, which
- * maps to a specific value for the variable.
- *
- * Routine:
- * Selecting this calls an entry-specific routine. This can be used for saving contents etc.
- *
- * Custom:
- * Display and behaviour of this entry is defined by a set of callbacks.
- */
-
-#define MENU_SUBMENU_TYPE 0
-typedef struct menu_submenu_s
-{
- OPTION_PREAMBLE
-
- menu_t * submenu; /* Pointer to the submenu */
-} menu_submenu_t;
-
-#define MENU_BOOLEAN_TYPE 1
-typedef struct menu_boolean_s
-{
- OPTION_PREAMBLE
-
- char *variable; /* Name of the variable to getenv()/setenv() */
- int subtype; /* Subtype (on/off, 0/1, yes/no, enable/disable), see below */
- int mutex; /* Bit mask of options to enable/disable. Bit 0 is the option
- immediately following this one, bit 1 is the next one etc.
- bit 7 = 0 means to disable when this option is off,
- bit 7 = 1 means to disable when this option is on.
- An option is disabled when the type field's upper bit is set */
-} menu_boolean_t;
-
-/* BOOLEAN Menu flags */
-#define MENU_BOOLEAN_ONOFF 0x01
-#define MENU_BOOLEAN_01 0x02
-#define MENU_BOOLEAN_YESNO 0x03
-#define MENU_BOOLEAN_ENDIS 0x04
-#define MENU_BOOLEAN_TYPE_MASK 0x07
-
-
-#define MENU_TEXT_TYPE 2
-typedef struct menu_text_s
-{
- OPTION_PREAMBLE
-
- char *variable; /* Name of the variable to getenv()/setenv() */
- int maxchars; /* Max number of characters */
- char *charset; /* Optional charset to use */
- int flags; /* Flags - see below */
-} menu_text_t;
-
-/* TEXT entry menu flags */
-#define MENU_TEXT_NUMERIC 0x01
-#define MENU_TEXT_HEXADECIMAL 0x02
-#define MENU_TEXT_FREE 0x03
-#define MENU_TEXT_TYPE_MASK 0x07
-
-
-#define MENU_SELECTION_TYPE 3
-typedef struct menu_select_option_s {
- char *map_from; /* Map this variable contents ... */
- char *map_to; /* ... to this menu text and vice versa */
-} menu_select_option_t;
-
-typedef struct menu_select_s {
- OPTION_PREAMBLE int num_options; /* Number of mappings */
- menu_select_option_t **options;
- /* Option list array */
-} menu_select_t;
-
-
-#define MENU_ROUTINE_TYPE 4
-typedef void (*menu_routine_callback) (struct menu_routine_s *);
-
-typedef struct menu_routine_s {
- OPTION_PREAMBLE menu_routine_callback callback;
- /* routine to be called */
- void *user_data; /* User data, don't care for system */
-} menu_routine_t;
-
-
-#define MENU_CUSTOM_TYPE 5
-typedef void (*menu_custom_draw) (struct menu_custom_s *);
-typedef void (*menu_custom_key) (struct menu_custom_s *, int);
-
-typedef struct menu_custom_s {
- OPTION_PREAMBLE menu_custom_draw drawfunc;
- menu_custom_key keyfunc;
- void *user_data;
-} menu_custom_t;
-
-/*
- * The menu option superstructure
- */
-typedef struct menu_option_s {
- union {
- menu_submenu_t m_sub_menu;
- menu_boolean_t m_boolean;
- menu_text_t m_text;
- menu_select_t m_select;
- menu_routine_t m_routine;
- };
-} menu_option_t;
-
-/* Init the menu system. Returns <0 on error */
-int menu_init(menu_t *root);
-
-/* Execute a single menu. Returns <0 on error */
-int menu_do(menu_t *menu);
-
-#endif
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o
+COBJS-y := $(BOARD).o iopin.o
COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
--- /dev/null
+To configure for the current (Rev 3.x) ADS5121
+ make ads5121_config
+This will automatically include PCI, the Real Time CLock, add backup flash
+ability and set the correct frequency and memory configuration.
+
+To configure for the older Rev 2 ADS5121 type (this will not have PCI)
+ make ads5121_rev2_config
#include <common.h>
#include <mpc512x.h>
+#include "iopin.h"
#include <asm/bitops.h>
#include <command.h>
#include <fdt_support.h>
+#ifdef CONFIG_MISC_INIT_R
+#include <i2c.h>
+#endif
+#include "iopin.h" /* for iopin_initialize() prototype */
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
#define CSAW_START(start) ((start) & 0xFFFF0000)
#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
-#define MPC5121_IOCTL_PSC6_0 (0x284/4)
-#define MPC5121_IO_DIU_START (0x288/4)
-#define MPC5121_IO_DIU_END (0x2fc/4)
-
-/* Functional pin muxing */
-#define MPC5121_IO_FUNC1 (0 << 7)
-#define MPC5121_IO_FUNC2 (1 << 7)
-#define MPC5121_IO_FUNC3 (2 << 7)
-#define MPC5121_IO_FUNC4 (3 << 7)
-#define MPC5121_IO_ST (1 << 2)
-#define MPC5121_IO_DS_1 (0)
-#define MPC5121_IO_DS_2 (1)
-#define MPC5121_IO_DS_3 (2)
-#define MPC5121_IO_DS_4 (3)
-
long int fixed_sdram(void);
int board_early_init_f (void)
{
volatile immap_t *im = (immap_t *) CFG_IMMR;
- u32 lpcaw, tmp32;
- volatile ioctrl512x_t *ioctl = &(im->io_ctrl);
- int i;
+ u32 lpcaw;
/*
* Initialize Local Window for the CPLD registers access (CS2 selects
* Without this the flash identification routine fails, as it needs to issue
* write commands in order to establish the device ID.
*/
- *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+#ifdef CONFIG_ADS5121_REV2
+ *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+#else
+ if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) {
+ *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+ } else {
+ /* running from Backup flash */
+ *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32;
+ }
+#endif
+ /*
+ * Configure Flash Speed
+ */
+ *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG;
/*
* Enable clocks
*/
im->clk.sccr[0] = SCCR1_CLOCKS_EN;
im->clk.sccr[1] = SCCR2_CLOCKS_EN;
- /* Configure DIU clock pin */
- tmp32 = ioctl->regs[MPC5121_IOCTL_PSC6_0];
- tmp32 &= ~0x1ff;
- tmp32 |= MPC5121_IO_FUNC3 | MPC5121_IO_DS_4;
- ioctl->regs[MPC5121_IOCTL_PSC6_0] = tmp32;
-
- /* Initialize IO pins (pin mux) for DIU function */
- for (i = MPC5121_IO_DIU_START; i < MPC5121_IO_DIU_END; i++)
- ioctl->regs[i] |= (MPC5121_IO_FUNC3 | MPC5121_IO_DS_4);
-
return 0;
}
int misc_init_r(void)
{
u8 tmp_val;
+ extern int ads5121_diu_init(void);
/* Using this for DIU init before the driver in linux takes over
* Enable the TFP410 Encoder (I2C address 0x38)
{
ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00);
uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02);
- volatile immap_t *im = (immap_t *) CFG_IMMR;
- volatile unsigned long *reg;
- int i;
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
+ /* initialize function mux & slew rate IO inter alia on IO Pins */
+ iopin_initialize();
- /* change the slew rate on all pata pins to max */
- reg = (unsigned long *) &(im->io_ctrl.regs[PATA_CE1_IDX]);
- for (i = 0; i < 9; i++)
- reg[i] |= 0x00000003;
return 0;
}
/* Modify PXCLK in GUTS CLKDVDR */
debug("DIU: Current value of CLKDVDR = 0x%08x\n", *clkdvdr);
temp = *clkdvdr & 0xFFFFFF00;
- *clkdvdr = temp | (pixval & 0x1F);
+ *clkdvdr = temp | (pixval & 0xFF);
debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *clkdvdr);
}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include "iopin.h"
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
+#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
+#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
+#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
+#define IO_PIN_DS(v) ((v)) /* slew rate */
+
+static struct iopin_t {
+ int p_offset; /* offset from IOCTL_MEM_OFFSET */
+ int nr_pins; /* number of pins to set this way */
+ int bit_or; /* or in the value instead of overwrite */
+ u_long val; /* value to write or or */
+} ioregs_init[] = {
+ /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+ {
+ IOCTL_SPDIF_TXCLK, 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* Set highest Slew on 9 PATA pins */
+ {
+ IOCTL_PATA_CE1, 9, 1,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+ {
+ IOCTL_PSC0_0, 15, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=SPDIF_TXCLK */
+ {
+ IOCTL_LPC_CS1, 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+ {
+ IOCTL_I2C1_SCL, 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU CLK */
+ {
+ IOCTL_PSC6_0, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU_HSYNC */
+ {
+ IOCTL_PSC6_1, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+ {
+ IOCTL_PSC6_4, 26, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
+
+void iopin_initialize(void)
+{
+ short i, j, n, p;
+ u_long *reg;
+ immap_t *im = (immap_t *)CFG_IMMR;
+
+ reg = (u_long *)&(im->io_ctrl.regs[0]);
+
+ if (sizeof(ioregs_init) == 0)
+ return;
+
+ n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
+
+ for (i = 0; i < n; i++) {
+ for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+ p < ioregs_init[i].nr_pins; p++, j++) {
+ if (ioregs_init[i].bit_or)
+ reg[j] |= ioregs_init[i].val;
+ else
+ reg[j] = ioregs_init[i].val;
+ }
+ }
+ return;
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define IOCTL_MEM 0x000
+#define IOCTL_GP 0x004
+#define IOCTL_LPC_CLK 0x008
+#define IOCTL_LPC_OE 0x00C
+#define IOCTL_LPC_RWB 0x010
+#define IOCTL_LPC_ACK 0x014
+#define IOCTL_LPC_CS0 0x018
+#define IOCTL_NFC_CE0 0x01C
+#define IOCTL_LPC_CS1 0x020
+#define IOCTL_LPC_CS2 0x024
+#define IOCTL_LPC_AX03 0x028
+#define IOCTL_EMB_AX02 0x02C
+#define IOCTL_EMB_AX01 0x030
+#define IOCTL_EMB_AX00 0x034
+#define IOCTL_EMB_AD31 0x038
+#define IOCTL_EMB_AD30 0x03C
+#define IOCTL_EMB_AD29 0x040
+#define IOCTL_EMB_AD28 0x044
+#define IOCTL_EMB_AD27 0x048
+#define IOCTL_EMB_AD26 0x04C
+#define IOCTL_EMB_AD25 0x050
+#define IOCTL_EMB_AD24 0x054
+#define IOCTL_EMB_AD23 0x058
+#define IOCTL_EMB_AD22 0x05C
+#define IOCTL_EMB_AD21 0x060
+#define IOCTL_EMB_AD20 0x064
+#define IOCTL_EMB_AD19 0x068
+#define IOCTL_EMB_AD18 0x06C
+#define IOCTL_EMB_AD17 0x070
+#define IOCTL_EMB_AD16 0x074
+#define IOCTL_EMB_AD15 0x078
+#define IOCTL_EMB_AD14 0x07C
+#define IOCTL_EMB_AD13 0x080
+#define IOCTL_EMB_AD12 0x084
+#define IOCTL_EMB_AD11 0x088
+#define IOCTL_EMB_AD10 0x08C
+#define IOCTL_EMB_AD09 0x090
+#define IOCTL_EMB_AD08 0x094
+#define IOCTL_EMB_AD07 0x098
+#define IOCTL_EMB_AD06 0x09C
+#define IOCTL_EMB_AD05 0x0A0
+#define IOCTL_EMB_AD04 0x0A4
+#define IOCTL_EMB_AD03 0x0A8
+#define IOCTL_EMB_AD02 0x0AC
+#define IOCTL_EMB_AD01 0x0B0
+#define IOCTL_EMB_AD00 0x0B4
+#define IOCTL_PATA_CE1 0x0B8
+#define IOCTL_PATA_CE2 0x0BC
+#define IOCTL_PATA_ISOLATE 0x0C0
+#define IOCTL_PATA_IOR 0x0C4
+#define IOCTL_PATA_IOW 0x0C8
+#define IOCTL_PATA_IOCHRDY 0x0CC
+#define IOCTL_PATA_INTRQ 0x0D0
+#define IOCTL_PATA_DRQ 0x0D4
+#define IOCTL_PATA_DACK 0x0D8
+#define IOCTL_NFC_WP 0x0DC
+#define IOCTL_NFC_RB 0x0E0
+#define IOCTL_NFC_ALE 0x0E4
+#define IOCTL_NFC_CLE 0x0E8
+#define IOCTL_NFC_WE 0x0EC
+#define IOCTL_NFC_RE 0x0F0
+#define IOCTL_PCI_AD31 0x0F4
+#define IOCTL_PCI_AD30 0x0F8
+#define IOCTL_PCI_AD29 0x0FC
+#define IOCTL_PCI_AD28 0x100
+#define IOCTL_PCI_AD27 0x104
+#define IOCTL_PCI_AD26 0x108
+#define IOCTL_PCI_AD25 0x10C
+#define IOCTL_PCI_AD24 0x110
+#define IOCTL_PCI_AD23 0x114
+#define IOCTL_PCI_AD22 0x118
+#define IOCTL_PCI_AD21 0x11C
+#define IOCTL_PCI_AD20 0x120
+#define IOCTL_PCI_AD19 0x124
+#define IOCTL_PCI_AD18 0x128
+#define IOCTL_PCI_AD17 0x12C
+#define IOCTL_PCI_AD16 0x130
+#define IOCTL_PCI_AD15 0x134
+#define IOCTL_PCI_AD14 0x138
+#define IOCTL_PCI_AD13 0x13C
+#define IOCTL_PCI_AD12 0x140
+#define IOCTL_PCI_AD11 0x144
+#define IOCTL_PCI_AD10 0x148
+#define IOCTL_PCI_AD09 0x14C
+#define IOCTL_PCI_AD08 0x150
+#define IOCTL_PCI_AD07 0x154
+#define IOCTL_PCI_AD06 0x158
+#define IOCTL_PCI_AD05 0x15C
+#define IOCTL_PCI_AD04 0x160
+#define IOCTL_PCI_AD03 0x164
+#define IOCTL_PCI_AD02 0x168
+#define IOCTL_PCI_AD01 0x16C
+#define IOCTL_PCI_AD00 0x170
+#define IOCTL_PCI_CBE0 0x174
+#define IOCTL_PCI_CBE1 0x178
+#define IOCTL_PCI_CBE2 0x17C
+#define IOCTL_PCI_CBE3 0x180
+#define IOCTL_PCI_GNT2 0x184
+#define IOCTL_PCI_REQ2 0x188
+#define IOCTL_PCI_GNT1 0x18C
+#define IOCTL_PCI_REQ1 0x190
+#define IOCTL_PCI_GNT0 0x194
+#define IOCTL_PCI_REQ0 0x198
+#define IOCTL_PCI_INTA 0x19C
+#define IOCTL_PCI_CLK 0x1A0
+#define IOCTL_PCI_RST_OUT 0x1A4
+#define IOCTL_PCI_FRAME 0x1A8
+#define IOCTL_PCI_IDSEL 0x1AC
+#define IOCTL_PCI_DEVSEL 0x1B0
+#define IOCTL_PCI_IRDY 0x1B4
+#define IOCTL_PCI_TRDY 0x1B8
+#define IOCTL_PCI_STOP 0x1BC
+#define IOCTL_PCI_PAR 0x1C0
+#define IOCTL_PCI_PERR 0x1C4
+#define IOCTL_PCI_SERR 0x1C8
+#define IOCTL_SPDIF_TXCLK 0x1CC
+#define IOCTL_SPDIF_TX 0x1D0
+#define IOCTL_SPDIF_RX 0x1D4
+#define IOCTL_I2C0_SCL 0x1D8
+#define IOCTL_I2C0_SDA 0x1DC
+#define IOCTL_I2C1_SCL 0x1E0
+#define IOCTL_I2C1_SDA 0x1E4
+#define IOCTL_I2C2_SCL 0x1E8
+#define IOCTL_I2C2_SDA 0x1EC
+#define IOCTL_IRQ0 0x1F0
+#define IOCTL_IRQ1 0x1F4
+#define IOCTL_CAN1_TX 0x1F8
+#define IOCTL_CAN2_TX 0x1FC
+#define IOCTL_J1850_TX 0x200
+#define IOCTL_J1850_RX 0x204
+#define IOCTL_PSC_MCLK_IN 0x208
+#define IOCTL_PSC0_0 0x20C
+#define IOCTL_PSC0_1 0x210
+#define IOCTL_PSC0_2 0x214
+#define IOCTL_PSC0_3 0x218
+#define IOCTL_PSC0_4 0x21C
+#define IOCTL_PSC1_0 0x220
+#define IOCTL_PSC1_1 0x224
+#define IOCTL_PSC1_2 0x228
+#define IOCTL_PSC1_3 0x22C
+#define IOCTL_PSC1_4 0x230
+#define IOCTL_PSC2_0 0x234
+#define IOCTL_PSC2_1 0x238
+#define IOCTL_PSC2_2 0x23C
+#define IOCTL_PSC2_3 0x240
+#define IOCTL_PSC2_4 0x244
+#define IOCTL_PSC3_0 0x248
+#define IOCTL_PSC3_1 0x24C
+#define IOCTL_PSC3_2 0x250
+#define IOCTL_PSC3_3 0x254
+#define IOCTL_PSC3_4 0x258
+#define IOCTL_PSC4_0 0x25C
+#define IOCTL_PSC4_1 0x260
+#define IOCTL_PSC4_2 0x264
+#define IOCTL_PSC4_3 0x268
+#define IOCTL_PSC4_4 0x26C
+#define IOCTL_PSC5_0 0x270
+#define IOCTL_PSC5_1 0x274
+#define IOCTL_PSC5_2 0x278
+#define IOCTL_PSC5_3 0x27C
+#define IOCTL_PSC5_4 0x280
+#define IOCTL_PSC6_0 0x284
+#define IOCTL_PSC6_1 0x288
+#define IOCTL_PSC6_2 0x28C
+#define IOCTL_PSC6_3 0x290
+#define IOCTL_PSC6_4 0x294
+#define IOCTL_PSC7_0 0x298
+#define IOCTL_PSC7_1 0x29C
+#define IOCTL_PSC7_2 0x2A0
+#define IOCTL_PSC7_3 0x2A4
+#define IOCTL_PSC7_4 0x2A8
+#define IOCTL_PSC8_0 0x2AC
+#define IOCTL_PSC8_1 0x2B0
+#define IOCTL_PSC8_2 0x2B4
+#define IOCTL_PSC8_3 0x2B8
+#define IOCTL_PSC8_4 0x2BC
+#define IOCTL_PSC9_0 0x2C0
+#define IOCTL_PSC9_1 0x2C4
+#define IOCTL_PSC9_2 0x2C8
+#define IOCTL_PSC9_3 0x2CC
+#define IOCTL_PSC9_4 0x2D0
+#define IOCTL_PSC10_0 0x2D4
+#define IOCTL_PSC10_1 0x2D8
+#define IOCTL_PSC10_2 0x2DC
+#define IOCTL_PSC10_3 0x2E0
+#define IOCTL_PSC10_4 0x2E4
+#define IOCTL_PSC11_0 0x2E8
+#define IOCTL_PSC11_1 0x2EC
+#define IOCTL_PSC11_2 0x2F0
+#define IOCTL_PSC11_3 0x2F4
+#define IOCTL_PSC11_4 0x2F8
+#define IOCTL_HRESET 0x2FC
+#define IOCTL_SRESET 0x300
+#define IOCTL_CKSTP_OUT 0x304
+#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
+#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
+#define IOCTL_USB2_PHY_DRVV_BUS 0x310
+
+extern void iopin_initialize(void);
return (ctrlc());
}
#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
/* read clock regsiter */
printf("===== Display reset and initialize register Start =========\n");
mfcpr(clk_pllc,reg);
- printf("cpr_pllc = %#010x\n",reg);
+ printf("cpr_pllc = %#010lx\n",reg);
mfcpr(clk_plld,reg);
- printf("cpr_plld = %#010x\n",reg);
+ printf("cpr_plld = %#010lx\n",reg);
mfcpr(clk_primad,reg);
- printf("cpr_primad = %#010x\n",reg);
+ printf("cpr_primad = %#010lx\n",reg);
mfcpr(clk_primbd,reg);
- printf("cpr_primbd = %#010x\n",reg);
+ printf("cpr_primbd = %#010lx\n",reg);
mfcpr(clk_opbd,reg);
- printf("cpr_opbd = %#010x\n",reg);
+ printf("cpr_opbd = %#010lx\n",reg);
mfcpr(clk_perd,reg);
- printf("cpr_perd = %#010x\n",reg);
+ printf("cpr_perd = %#010lx\n",reg);
mfcpr(clk_mald,reg);
- printf("cpr_mald = %#010x\n",reg);
+ printf("cpr_mald = %#010lx\n",reg);
/* read sdr register */
mfsdr(sdr_ebc,reg);
- printf("sdr_ebc = %#010x\n",reg);
+ printf("sdr_ebc = %#010lx\n",reg);
mfsdr(sdr_cp440,reg);
- printf("sdr_cp440 = %#010x\n",reg);
+ printf("sdr_cp440 = %#010lx\n",reg);
mfsdr(sdr_xcr,reg);
- printf("sdr_xcr = %#010x\n",reg);
+ printf("sdr_xcr = %#010lx\n",reg);
mfsdr(sdr_xpllc,reg);
- printf("sdr_xpllc = %#010x\n",reg);
+ printf("sdr_xpllc = %#010lx\n",reg);
mfsdr(sdr_xplld,reg);
- printf("sdr_xplld = %#010x\n",reg);
+ printf("sdr_xplld = %#010lx\n",reg);
mfsdr(sdr_pfc0,reg);
- printf("sdr_pfc0 = %#010x\n",reg);
+ printf("sdr_pfc0 = %#010lx\n",reg);
mfsdr(sdr_pfc1,reg);
- printf("sdr_pfc1 = %#010x\n",reg);
+ printf("sdr_pfc1 = %#010lx\n",reg);
mfsdr(sdr_cust0,reg);
- printf("sdr_cust0 = %#010x\n",reg);
+ printf("sdr_cust0 = %#010lx\n",reg);
mfsdr(sdr_cust1,reg);
- printf("sdr_cust1 = %#010x\n",reg);
+ printf("sdr_cust1 = %#010lx\n",reg);
mfsdr(sdr_uart0,reg);
- printf("sdr_uart0 = %#010x\n",reg);
+ printf("sdr_uart0 = %#010lx\n",reg);
mfsdr(sdr_uart1,reg);
- printf("sdr_uart1 = %#010x\n",reg);
+ printf("sdr_uart1 = %#010lx\n",reg);
printf("===== Display reset and initialize register End =========\n");
}
printf("PCI-X chip control registers\n");
mfsdr(sdr_xcr, reg);
- printf("sdr_xcr = %#010x\n", reg);
+ printf("sdr_xcr = %#010lx\n", reg);
mfsdr(sdr_xpllc, reg);
- printf("sdr_xpllc = %#010x\n", reg);
+ printf("sdr_xpllc = %#010lx\n", reg);
mfsdr(sdr_xplld, reg);
- printf("sdr_xplld = %#010x\n", reg);
+ printf("sdr_xplld = %#010lx\n", reg);
printf("PCI-X Bridge Configure registers\n");
printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID));
printf("PCIX0_HDTYPE = %#04x\n", in8(PCIX0_HDTYPE));
printf("PCIX0_BIST = %#04x\n", in8(PCIX0_BIST));
- printf("PCIX0_BAR0 = %#010x\n", in32r(PCIX0_BAR0));
- printf("PCIX0_BAR1 = %#010x\n", in32r(PCIX0_BAR1));
- printf("PCIX0_BAR2 = %#010x\n", in32r(PCIX0_BAR2));
- printf("PCIX0_BAR3 = %#010x\n", in32r(PCIX0_BAR3));
- printf("PCIX0_BAR4 = %#010x\n", in32r(PCIX0_BAR4));
- printf("PCIX0_BAR5 = %#010x\n", in32r(PCIX0_BAR5));
+ printf("PCIX0_BAR0 = %#010lx\n", in32r(PCIX0_BAR0));
+ printf("PCIX0_BAR1 = %#010lx\n", in32r(PCIX0_BAR1));
+ printf("PCIX0_BAR2 = %#010lx\n", in32r(PCIX0_BAR2));
+ printf("PCIX0_BAR3 = %#010lx\n", in32r(PCIX0_BAR3));
+ printf("PCIX0_BAR4 = %#010lx\n", in32r(PCIX0_BAR4));
+ printf("PCIX0_BAR5 = %#010lx\n", in32r(PCIX0_BAR5));
- printf("PCIX0_CISPTR = %#010x\n", in32r(PCIX0_CISPTR));
+ printf("PCIX0_CISPTR = %#010lx\n", in32r(PCIX0_CISPTR));
printf("PCIX0_SBSSYSVID = %#010x\n", in16r(PCIX0_SBSYSVID));
printf("PCIX0_SBSSYSID = %#010x\n", in16r(PCIX0_SBSYSID));
- printf("PCIX0_EROMBA = %#010x\n", in32r(PCIX0_EROMBA));
+ printf("PCIX0_EROMBA = %#010lx\n", in32r(PCIX0_EROMBA));
printf("PCIX0_CAP = %#04x\n", in8(PCIX0_CAP));
printf("PCIX0_INTLN = %#04x\n", in8(PCIX0_INTLN));
printf("PCIX0_INTPN = %#04x\n", in8(PCIX0_INTPN));
printf("PCIX0_MINGNT = %#04x\n", in8(PCIX0_MINGNT));
printf("PCIX0_MAXLTNCY = %#04x\n", in8(PCIX0_MAXLTNCY));
- printf("PCIX0_BRDGOPT1 = %#010x\n", in32r(PCIX0_BRDGOPT1));
- printf("PCIX0_BRDGOPT2 = %#010x\n", in32r(PCIX0_BRDGOPT2));
-
- printf("PCIX0_POM0LAL = %#010x\n", in32r(PCIX0_POM0LAL));
- printf("PCIX0_POM0LAH = %#010x\n", in32r(PCIX0_POM0LAH));
- printf("PCIX0_POM0SA = %#010x\n", in32r(PCIX0_POM0SA));
- printf("PCIX0_POM0PCILAL = %#010x\n", in32r(PCIX0_POM0PCIAL));
- printf("PCIX0_POM0PCILAH = %#010x\n", in32r(PCIX0_POM0PCIAH));
- printf("PCIX0_POM1LAL = %#010x\n", in32r(PCIX0_POM1LAL));
- printf("PCIX0_POM1LAH = %#010x\n", in32r(PCIX0_POM1LAH));
- printf("PCIX0_POM1SA = %#010x\n", in32r(PCIX0_POM1SA));
- printf("PCIX0_POM1PCILAL = %#010x\n", in32r(PCIX0_POM1PCIAL));
- printf("PCIX0_POM1PCILAH = %#010x\n", in32r(PCIX0_POM1PCIAH));
- printf("PCIX0_POM2SA = %#010x\n", in32r(PCIX0_POM2SA));
-
- printf("PCIX0_PIM0SA = %#010x\n", in32r(PCIX0_PIM0SA));
- printf("PCIX0_PIM0LAL = %#010x\n", in32r(PCIX0_PIM0LAL));
- printf("PCIX0_PIM0LAH = %#010x\n", in32r(PCIX0_PIM0LAH));
- printf("PCIX0_PIM1SA = %#010x\n", in32r(PCIX0_PIM1SA));
- printf("PCIX0_PIM1LAL = %#010x\n", in32r(PCIX0_PIM1LAL));
- printf("PCIX0_PIM1LAH = %#010x\n", in32r(PCIX0_PIM1LAH));
- printf("PCIX0_PIM2SA = %#010x\n", in32r(PCIX0_PIM1SA));
- printf("PCIX0_PIM2LAL = %#010x\n", in32r(PCIX0_PIM1LAL));
- printf("PCIX0_PIM2LAH = %#010x\n", in32r(PCIX0_PIM1LAH));
-
- printf("PCIX0_XSTS = %#010x\n", in32r(PCIX0_STS));
+ printf("PCIX0_BRDGOPT1 = %#010lx\n", in32r(PCIX0_BRDGOPT1));
+ printf("PCIX0_BRDGOPT2 = %#010lx\n", in32r(PCIX0_BRDGOPT2));
+
+ printf("PCIX0_POM0LAL = %#010lx\n", in32r(PCIX0_POM0LAL));
+ printf("PCIX0_POM0LAH = %#010lx\n", in32r(PCIX0_POM0LAH));
+ printf("PCIX0_POM0SA = %#010lx\n", in32r(PCIX0_POM0SA));
+ printf("PCIX0_POM0PCILAL = %#010lx\n", in32r(PCIX0_POM0PCIAL));
+ printf("PCIX0_POM0PCILAH = %#010lx\n", in32r(PCIX0_POM0PCIAH));
+ printf("PCIX0_POM1LAL = %#010lx\n", in32r(PCIX0_POM1LAL));
+ printf("PCIX0_POM1LAH = %#010lx\n", in32r(PCIX0_POM1LAH));
+ printf("PCIX0_POM1SA = %#010lx\n", in32r(PCIX0_POM1SA));
+ printf("PCIX0_POM1PCILAL = %#010lx\n", in32r(PCIX0_POM1PCIAL));
+ printf("PCIX0_POM1PCILAH = %#010lx\n", in32r(PCIX0_POM1PCIAH));
+ printf("PCIX0_POM2SA = %#010lx\n", in32r(PCIX0_POM2SA));
+
+ printf("PCIX0_PIM0SA = %#010lx\n", in32r(PCIX0_PIM0SA));
+ printf("PCIX0_PIM0LAL = %#010lx\n", in32r(PCIX0_PIM0LAL));
+ printf("PCIX0_PIM0LAH = %#010lx\n", in32r(PCIX0_PIM0LAH));
+ printf("PCIX0_PIM1SA = %#010lx\n", in32r(PCIX0_PIM1SA));
+ printf("PCIX0_PIM1LAL = %#010lx\n", in32r(PCIX0_PIM1LAL));
+ printf("PCIX0_PIM1LAH = %#010lx\n", in32r(PCIX0_PIM1LAH));
+ printf("PCIX0_PIM2SA = %#010lx\n", in32r(PCIX0_PIM1SA));
+ printf("PCIX0_PIM2LAL = %#010lx\n", in32r(PCIX0_PIM1LAL));
+ printf("PCIX0_PIM2LAH = %#010lx\n", in32r(PCIX0_PIM1LAH));
+
+ printf("PCIX0_XSTS = %#010lx\n", in32r(PCIX0_STS));
}
int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
/* give reset to BCSR */
*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
int i, rc;
wp = (addr & ~1); /* get lower word aligned address */
- printf ("Writing %d short data to 0x%p from 0x%p.\n ", cnt, wp, src);
+ printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src);
/*
* handle unaligned start bytes
at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
+#if defined(CONFIG_AT91SAM9260EK)
+ /*
+ * use PA10, PA11 for ETX2, ETX3.
+ * PA23 and PA24 are for TWI EEPROM
+ */
+ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
+#else
at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
+#endif
at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
#endif
volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
if ((uint)&gur->porpllsr != 0xe00e0000) {
- printf("immap size error %x\n",&gur->porpllsr);
+ printf("immap size error %lx\n",(ulong)&gur->porpllsr);
}
printf ("Board: ATUM8548\n");
if (rc > 0x0F)
return -1;
- printf ("0x%x\n", rc);
+ printf ("0x%lx\n", rc);
return 0;
}
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
0x10000000) {
error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %d "
+ printf("%s: failure at rs232_4, rxd status is %lu "
"(should be 1)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x10000000) >> 28);
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
0x00000000) {
error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %d "
+ printf("%s: failure at rs232_4, rxd status is %lu "
"(should be 0)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x10000000) >> 28);
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
0x20000000) {
error_status = 3;
- printf("%s: failure at rs232_4, cts status is %d "
+ printf("%s: failure at rs232_4, cts status is %lu "
"(should be 1)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x20000000) >> 29);
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
0x00000000) {
error_status = 3;
- printf("%s: failure at rs232_4, cts status is %d "
+ printf("%s: failure at rs232_4, cts status is %lu "
"(should be 0)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x20000000) >> 29);
if (!bcmd)
return;
- sprintf(ka, "%lx", LOAD_ADDR);
+ sprintf(ka, "%lx", (ulong)LOAD_ADDR);
/* prepare our bootargs */
rsargs = getenv("rs-args");
}
#endif /* CFG_DISCOVER_PHY */
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
-#define MACH_TYPE_DAVINCI_EVM 901
-
DECLARE_GLOBAL_DATA_PTR;
-extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
-extern phy_t phy;
/* Works on Always On power domain only (no PD argument) */
}
}
- if (!eth_hw_init()) {
+ if (!eth_hw_init())
printf("ethernet init failed!\n");
- } else {
- printf("ETH PHY : %s\n", phy.name);
- }
i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1);
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
-#define MACH_TYPE_SCHMOOGIE 1255
-
DECLARE_GLOBAL_DATA_PTR;
-extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
-extern phy_t phy;
/* Works on Always On power domain only (no PD argument) */
forceenv("serial#", (char *)&tmp[0]);
}
- if (!eth_hw_init()) {
+ if (!eth_hw_init())
printf("ethernet init failed!\n");
- } else {
- printf("ETH PHY : %s\n", phy.name);
- }
return(0);
}
extern void timer_init(void);
extern int eth_hw_init(void);
-extern phy_t phy;
/* Works on Always On power domain only (no PD argument) */
}
}
- if (!eth_hw_init()) {
+ if (!eth_hw_init())
printf("Ethernet init failed\n");
- } else {
- printf("ETH PHY: %s\n", phy.name);
- }
/* On this platform, U-Boot is copied in RAM by the UBL,
* so we are always in the relocated state. */
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
-#define MACH_TYPE_SONATA 1254
-
DECLARE_GLOBAL_DATA_PTR;
-extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
-extern phy_t phy;
/* Works on Always On power domain only (no PD argument) */
}
}
- if (!eth_hw_init()) {
+ if (!eth_hw_init())
printf("ethernet init failed!\n");
- } else {
- printf("ETH PHY : %s\n", phy.name);
- }
return(0);
}
break;
}
if(get_delta(start) > timeout) {
- DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
+ DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event);
return 0xff000000;
}
#include <net.h>
#include "srom.h"
-extern int eepro100_write_eeprom (struct eth_device* dev,
- int location, int addr_len, unsigned short data);
+extern int eepro100_write_eeprom (struct eth_device *dev,
+ int location, int addr_len,
+ unsigned short data);
/*----------------------------------------------------------------------------*/
unsigned short eepro100_srom_checksum (unsigned short *sromdata)
{
- unsigned short sum = 0;
- unsigned int i;
-
- for (i = 0; i < (EE_SIZE-1); i++)
- {
- sum += sromdata[i];
- }
- return (EE_CHECKSUM - sum);
+ unsigned short sum = 0;
+ unsigned int i;
+
+ for (i = 0; i < (EE_SIZE - 1); i++) {
+ sum += sromdata[i];
+ }
+ return (EE_CHECKSUM - sum);
}
/*----------------------------------------------------------------------------*/
int eepro100_srom_store (unsigned short *source)
{
- int count;
- struct eth_device onboard_dev;
-
- /* get onboard network iobase */
- pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0,
- (unsigned int *)&onboard_dev.iobase);
- onboard_dev.iobase &= ~0xf;
-
- source[63] = eepro100_srom_checksum (source);
-
- for (count=0; count < EE_SIZE; count++)
- {
- if ( eepro100_write_eeprom ((struct eth_device*)&onboard_dev,
- count, EE_ADDR_BITS, SROM_SHORT(source)) == -1 )
- return -1;
- source++;
- }
- return 0;
+ int count;
+ struct eth_device onboard_dev;
+
+ /* get onboard network iobase */
+ pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0,
+ (unsigned int *) &onboard_dev.iobase);
+ onboard_dev.iobase &= ~0xf;
+
+ source[63] = eepro100_srom_checksum (source);
+
+ for (count = 0; count < EE_SIZE; count++) {
+ if (eepro100_write_eeprom ((struct eth_device *) &onboard_dev,
+ count, EE_ADDR_BITS,
+ SROM_SHORT (source)) == -1) {
+ return -1;
+ }
+ source++;
+ }
+ return 0;
}
/*----------------------------------------------------------------------------*/
#ifdef EEPRO100_SROM_CHECK
-extern int read_eeprom (struct eth_device* dev, int location, int addr_len);
+extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
void eepro100_srom_load (unsigned short *destination)
{
- int count;
- struct eth_device onboard_dev;
+ int count;
+ struct eth_device onboard_dev;
+
#ifdef DEBUG
- int lr = 0;
- printf ("eepro100_srom_download:\n");
+ int lr = 0;
+
+ printf ("eepro100_srom_download:\n");
#endif
- /* get onboard network iobase */
- pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0,
- &onboard_dev.iobase);
- onboard_dev.iobase &= ~0xf;
+ /* get onboard network iobase */
+ pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0,
+ &onboard_dev.iobase);
+ onboard_dev.iobase &= ~0xf;
- memset (destination, 0x65, 128);
+ memset (destination, 0x65, 128);
- for (count=0; count < 0x40; count++)
- {
- *destination++ = read_eeprom (struct eth_device*)&onboard_dev,
- count, EE_ADDR_BITS);
+ for (count = 0; count < 0x40; count++) {
+ *destination++ = read_eeprom ((struct eth_device *) &onboard_dev,
+ count, EE_ADDR_BITS);
#ifdef DEBUG
- printf ("%04x ", *(destination - 1));
- if (lr++ == 7)
- {
- printf("\n");
- lr = 0;
- }
+ printf ("%04x ", *(destination - 1));
+ if (lr++ == 7) {
+ printf ("\n");
+ lr = 0;
+ }
#endif
- }
+ }
}
#endif /* EEPRO100_SROM_CHECK */
for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
- save1=*addr; /* save contents of addr */
- save2=*b; /* save contents of base */
+ save1 = *addr; /* save contents of addr */
+ save2 = *b; /* save contents of base */
*addr=cnt; /* write cnt to addr */
*b=0; /* put null at base */
return 0;
}
#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
int eth_len=0;
char *eth_data;
- eth0_rx_desc_single *rx=&p->eth_rx_desc[(p->rdn)];
+ eth0_rx_desc_single *rx = &p->eth_rx_desc[(p->rdn)];
INVALIDATE_DCACHE((unsigned int)rx,(unsigned int)(rx+1));
#ifdef DEBUG
unsigned int old_command_stat,old_psr;
#endif
- eth0_tx_desc_single *tx=&dev->eth_tx_desc[dev->tdn];
+ eth0_tx_desc_single *tx = &dev->eth_tx_desc[dev->tdn];
/* wait for tx to be ready */
INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1));
int
mpsc_test_char(void)
{
- volatile unsigned int *p=&rx_desc_base[rx_desc_index*8];
+ volatile unsigned int *p = &rx_desc_base[rx_desc_index*8];
INVALIDATE_DCACHE(&p[1], &p[2]);
default:
pd_size = 0;
or_am = 0xFFE00000;
- printf("## Unsupported flash detected by BCSR: 0x%08X\n", bcsr[2]);
+ printf("## Unsupported flash detected by BCSR: 0x%08lX\n", bcsr[2]);
}
total_size = 0;
/*
- * Copyright 2006 Freescale Semiconductor
+ * Copyright 2006, 2008 Freescale Semiconductor
* York Sun (yorksun@freescale.com)
* Haiying Wang (haiying.wang@freescale.com)
+ * Timur Tabi (timur@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
#include <i2c.h>
#include <linux/ctype.h>
-typedef struct {
- u8 id[4]; /* 0x0000 - 0x0003 EEPROM Tag */
- u8 sn[12]; /* 0x0004 - 0x000F Serial Number */
- u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */
- u8 date[6]; /* 0x0015 - 0x001a Build Date */
- u8 res_0; /* 0x001b Reserved */
- u8 version[4]; /* 0x001c - 0x001f Version */
- u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/
- u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/
- u8 res_1[22]; /* 0x0020 - 0x003f Reserved */
- u8 mac_size; /* 0x0040 Mac table size */
- u8 mac_flag; /* 0x0041 Mac table flags */
- u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */
- u32 crc; /* 0x0072 crc32 checksum */
-} EEPROM_data;
-
-static EEPROM_data mac_data;
-
-int mac_show(void)
+#include "../common/eeprom.h"
+
+#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID)
+#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID"
+#endif
+
+/**
+ * static eeprom: EEPROM layout for CCID or NXID formats
+ *
+ * See application note AN3638 for details.
+ */
+static struct __attribute__ ((__packed__)) eeprom {
+#ifdef CFG_I2C_EEPROM_CCID
+ u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */
+ u8 major; /* 0x04 Board revision, major */
+ u8 minor; /* 0x05 Board revision, minor */
+ u8 sn[10]; /* 0x06 - 0x0F Serial Number*/
+ u8 errata[2]; /* 0x10 - 0x11 Errata Level */
+ u8 date[6]; /* 0x12 - 0x17 Build Date */
+ u8 res_0[40]; /* 0x18 - 0x3f Reserved */
+ u8 mac_count; /* 0x40 Number of MAC addresses */
+ u8 mac_flag; /* 0x41 MAC table flags */
+ u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */
+ u32 crc; /* 0x72 CRC32 checksum */
+#endif
+#ifdef CFG_I2C_EEPROM_NXID
+ u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */
+ u8 sn[12]; /* 0x04 - 0x0F Serial Number */
+ u8 errata[5]; /* 0x10 - 0x14 Errata Level */
+ u8 date[6]; /* 0x15 - 0x1a Build Date */
+ u8 res_0; /* 0x1b Reserved */
+ u32 version; /* 0x1c - 0x1f NXID Version */
+ u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */
+ u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */
+ u8 tempcalflags; /* 0x2a Temperature Calibration Flags */
+ u8 res_1[21]; /* 0x2b - 0x3f Reserved */
+ u8 mac_count; /* 0x40 Number of MAC addresses */
+ u8 mac_flag; /* 0x41 MAC table flags */
+ u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */
+ u32 crc; /* 0x72 CRC32 checksum */
+#endif
+} e;
+
+/* Set to 1 if we've read EEPROM into memory */
+static int has_been_read = 0;
+
+#ifdef CFG_I2C_EEPROM_NXID
+/* Is this a valid NXID EEPROM? */
+#define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D'))
+#endif
+
+#ifdef CFG_I2C_EEPROM_CCID
+/* Is this a valid CCID EEPROM? */
+#define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
+#endif
+
+/**
+ * show_eeprom - display the contents of the EEPROM
+ */
+static void show_eeprom(void)
{
int i;
- u8 mac_size;
- unsigned char ethaddr[8][18];
- unsigned char enetvar[32];
-
- /* Show EEPROM tagID,
- * always the four characters 'NXID'.
- */
- printf("ID ");
- for (i = 0; i < 4; i++)
- printf("%c", mac_data.id[i]);
- printf("\n");
-
- /* Show Serial number,
- * 0 to 11 charaters of errata information.
- */
- printf("SN ");
- for (i = 0; i < 12; i++)
- printf("%c", mac_data.sn[i]);
- printf("\n");
-
- /* Show Errata Level,
- * 0 to 4 characters of errata information.
- */
- printf("Errata ");
- for (i = 0; i < 5; i++)
- printf("%c", mac_data.errata[i]);
- printf("\n");
-
- /* Show Build Date,
- * BCD date values, as YYMMDDhhmmss.
- */
- printf("Date 20%02x/%02x/%02x %02x:%02x:%02x\n",
- mac_data.date[0],
- mac_data.date[1],
- mac_data.date[2],
- mac_data.date[3],
- mac_data.date[4],
- mac_data.date[5]);
-
- /* Show MAC table size,
- * Value from 0 to 7 indicating how many MAC
- * addresses are stored in the system EEPROM.
- */
- if((mac_data.mac_size > 0) && (mac_data.mac_size <= 8))
- mac_size = mac_data.mac_size;
- else
- mac_size = 8; /* Set the max size */
- printf("MACSIZE %x\n", mac_size);
-
- /* Show Mac addresses */
- for (i = 0; i < mac_size; i++) {
- sprintf((char *)ethaddr[i],
- "%02x:%02x:%02x:%02x:%02x:%02x",
- mac_data.mac[i][0],
- mac_data.mac[i][1],
- mac_data.mac[i][2],
- mac_data.mac[i][3],
- mac_data.mac[i][4],
- mac_data.mac[i][5]);
- printf("MAC %d %s\n", i, ethaddr[i]);
-
- sprintf((char *)enetvar,
- i ? "eth%daddr" : "ethaddr", i);
- setenv((char *)enetvar, (char *)ethaddr[i]);
+ unsigned int crc;
+
+ /* EEPROM tag ID, either CCID or NXID */
+#ifdef CFG_I2C_EEPROM_NXID
+ printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
+ be32_to_cpu(e.version));
+#else
+ printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
+#endif
+
+ /* Serial number */
+ printf("SN: %s\n", e.sn);
+
+ /* Errata level. */
+#ifdef CFG_I2C_EEPROM_NXID
+ printf("Errata: %s\n", e.errata);
+#else
+ printf("Errata: %c%c\n",
+ e.errata[0] ? e.errata[0] : '.',
+ e.errata[1] ? e.errata[1] : '.');
+#endif
+
+ /* Build date, BCD date values, as YYMMDDhhmmss */
+ printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n",
+ e.date[0], e.date[1], e.date[2],
+ e.date[3] & 0x7F, e.date[4], e.date[5],
+ e.date[3] & 0x80 ? "PM" : "");
+
+ /* Show MAC addresses */
+ for (i = 0; i < min(e.mac_count, 8); i++) {
+ u8 *p = e.mac[i];
+ printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i,
+ p[0], p[1], p[2], p[3], p[4], p[5]);
}
- return 0;
+ crc = crc32(0, (void *)&e, sizeof(e) - 4);
+
+ if (crc == be32_to_cpu(e.crc))
+ printf("CRC: %08x\n", be32_to_cpu(e.crc));
+ else
+ printf("CRC: %08x (should be %08x)\n",
+ be32_to_cpu(e.crc), crc);
+
+#ifdef DEBUG
+ printf("EEPROM dump: (0x%x bytes)\n", sizeof(e));
+ for (i = 0; i < sizeof(e); i++) {
+ if ((i % 16) == 0)
+ printf("%02X: ", i);
+ printf("%02X ", ((u8 *)&e)[i]);
+ if (((i % 16) == 15) || (i == sizeof(e) - 1))
+ printf("\n");
+ }
+#endif
}
-int mac_read(void)
+/**
+ * read_eeprom - read the EEPROM into memory
+ */
+static int read_eeprom(void)
{
- int ret, length;
- unsigned int crc = 0;
- unsigned char dev = ID_EEPROM_ADDR, *data;
+ int ret;
+#ifdef CFG_EEPROM_BUS_NUM
+ unsigned int bus;
+#endif
- length = sizeof(EEPROM_data);
- ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length);
- if (ret) {
- printf("Read failed.\n");
- return -1;
- }
+ if (has_been_read)
+ return 0;
- data = (unsigned char *)(&mac_data);
- printf("Check CRC on reading ...");
- crc = crc32(crc, data, length - 4);
- if (crc != mac_data.crc) {
- printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n",
- mac_data.crc, crc);
- return -1;
- } else {
- printf("CRC OK\n");
- mac_show();
- }
- return 0;
+#ifdef CFG_EEPROM_BUS_NUM
+ bus = i2c_get_bus_num();
+ i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+#endif
+
+ ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+ (void *)&e, sizeof(e));
+
+#ifdef CFG_EEPROM_BUS_NUM
+ i2c_set_bus_num(bus);
+#endif
+
+#ifdef DEBUG
+ show_eeprom();
+#endif
+
+ has_been_read = (ret == 0) ? 1 : 0;
+
+ return ret;
}
-int mac_prog(void)
+/**
+ * prog_eeprom - write the EEPROM from memory
+ */
+static int prog_eeprom(void)
{
int ret, i, length;
- unsigned int crc = 0;
- unsigned char dev = ID_EEPROM_ADDR, *ptr;
- unsigned char *eeprom_data = (unsigned char *)(&mac_data);
-
- mac_data.res_0 = 0;
- memset((void *)mac_data.res_1, 0, sizeof(mac_data.res_1));
-
- length = sizeof(EEPROM_data);
- crc = crc32(crc, eeprom_data, length - 4);
- mac_data.crc = crc;
- for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) {
- ret = i2c_write(dev, i, 1, ptr, min((length - i),8));
- udelay(5000); /* 5ms write cycle timing */
+ unsigned int crc;
+ void *p;
+#ifdef CFG_EEPROM_BUS_NUM
+ unsigned int bus;
+#endif
+
+ /* Set the reserved values to 0xFF */
+#ifdef CFG_I2C_EEPROM_NXID
+ e.res_0 = 0xFF;
+ memset(e.res_1, 0xFF, sizeof(e.res_1));
+#else
+ memset(e.res_0, 0xFF, sizeof(e.res_0));
+#endif
+
+ length = sizeof(e);
+ crc = crc32(0, (void *)&e, length - 4);
+ e.crc = cpu_to_be32(crc);
+
+#ifdef CFG_EEPROM_BUS_NUM
+ bus = i2c_get_bus_num();
+ i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+#endif
+
+ for (i = 0, p = &e; i < length; i += 8, p += 8) {
+ ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN,
+ p, min((length - i), 8));
if (ret)
break;
+ udelay(5000); /* 5ms write cycle timing */
}
+
+#ifdef CFG_EEPROM_BUS_NUM
+ i2c_set_bus_num(bus);
+#endif
+
if (ret) {
printf("Programming failed.\n");
return -1;
- } else {
- printf("Programming %d bytes. Reading back ...\n", length);
- mac_read();
}
+
+ printf("Programming passed.\n");
return 0;
}
-int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/**
+ * h2i - converts hex character into a number
+ *
+ * This function takes a hexadecimal character (e.g. '7' or 'C') and returns
+ * the integer equivalent.
+ */
+static inline u8 h2i(char p)
+{
+ if ((p >= '0') && (p <= '9'))
+ return p - '0';
+
+ if ((p >= 'A') && (p <= 'F'))
+ return (p - 'A') + 10;
+
+ if ((p >= 'a') && (p <= 'f'))
+ return (p - 'a') + 10;
+
+ return 0;
+}
+
+/**
+ * set_date - stores the build date into the EEPROM
+ *
+ * This function takes a pointer to a string in the format "YYMMDDhhmmss"
+ * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string,
+ * and stores it in the build date field of the EEPROM local copy.
+ */
+static void set_date(const char *string)
+{
+ unsigned int i;
+
+ if (strlen(string) != 12) {
+ printf("Usage: mac date YYMMDDhhmmss\n");
+ return;
+ }
+
+ for (i = 0; i < 6; i++)
+ e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]);
+}
+
+/**
+ * set_mac_address - stores a MAC address into the EEPROM
+ *
+ * This function takes a pointer to MAC address string
+ * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and
+ * stores it in one of the MAC address fields of the EEPROM local copy.
+ */
+static void set_mac_address(unsigned int index, const char *string)
+{
+ char *p = (char *) string;
+ unsigned int i;
+
+ if (!string) {
+ printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n");
+ return;
+ }
+
+ for (i = 0; *p && (i < 6); i++) {
+ e.mac[index][i] = simple_strtoul(p, &p, 16);
+ if (*p == ':')
+ p++;
+ }
+}
+
+int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int i;
- char cmd = 's';
- unsigned long long mac_val;
+ char cmd;
- if (i2c_probe(ID_EEPROM_ADDR) != 0)
- return -1;
+ if (argc == 1) {
+ show_eeprom();
+ return 0;
+ }
+
+ cmd = argv[1][0];
- if (argc > 1) {
- cmd = argv[1][0];
+ if (cmd == 'r') {
+ read_eeprom();
+ return 0;
+ }
+
+ if ((cmd == 'i') && (argc > 2)) {
+ for (i = 0; i < 4; i++)
+ e.id[i] = argv[2][i];
+ return 0;
+ }
+
+ if (!is_valid) {
+ printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n");
+ return 0;
+ }
+
+ if (argc == 2) {
switch (cmd) {
- case 'r': /* display */
- mac_read();
- break;
case 's': /* save */
- mac_prog();
- break;
- case 'i': /* id */
- for (i = 0; i < 4; i++) {
- mac_data.id[i] = argv[2][i];
- }
+ prog_eeprom();
break;
- case 'n': /* serial number */
- for (i = 0; i < 12; i++) {
- mac_data.sn[i] = argv[2][i];
- }
- break;
- case 'e': /* errata */
- for (i = 0; i < 5; i++) {
- mac_data.errata[i] = argv[2][i];
- }
- break;
- case 'd': /* date */
- mac_val = simple_strtoull(argv[2], NULL, 16);
- for (i = 0; i < 6; i++) {
- mac_data.date[i] = (mac_val >> (40 - 8 * i));
- }
- break;
- case 'p': /* mac table size */
- mac_data.mac_size =
- (unsigned char)simple_strtoul(argv[2], NULL, 16);
- break;
- case '0': /* mac 0 */
- case '1': /* mac 1 */
- case '2': /* mac 2 */
- case '3': /* mac 3 */
- case '4': /* mac 4 */
- case '5': /* mac 5 */
- case '6': /* mac 6 */
- case '7': /* mac 7 */
- mac_val = simple_strtoull(argv[2], NULL, 16);
- for (i = 0; i < 6; i++) {
- mac_data.mac[cmd - '0'][i] =
- *((unsigned char *)
- (((unsigned int)(&mac_val)) + i + 2));
- }
- break;
- case 'h': /* help */
default:
printf("Usage:\n%s\n", cmdtp->usage);
break;
}
- } else {
- mac_show();
+
+ return 0;
}
+
+ /* We know we have at least one parameter */
+
+ switch (cmd) {
+ case 'n': /* serial number */
+ memset(e.sn, 0, sizeof(e.sn));
+ strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
+ break;
+ case 'e': /* errata */
+#ifdef CFG_I2C_EEPROM_NXID
+ memset(e.errata, 0, 5);
+ strncpy((char *)e.errata, argv[2], 4);
+#else
+ e.errata[0] = argv[2][0];
+ e.errata[1] = argv[2][1];
+#endif
+ break;
+ case 'd': /* date BCD format YYMMDDhhmmss */
+ set_date(argv[2]);
+ break;
+ case 'p': /* MAC table size */
+ e.mac_count = simple_strtoul(argv[2], NULL, 16);
+ break;
+ case '0' ... '7': /* "mac 0" through "mac 7" */
+ set_mac_address(cmd - '0', argv[2]);
+ break;
+ case 'h': /* help */
+ default:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ break;
+ }
+
return 0;
}
+/**
+ * mac_read_from_eeprom - read the MAC addresses from EEPROM
+ *
+ * This function reads the MAC addresses from EEPROM and sets the
+ * appropriate environment variables for each one read.
+ *
+ * The environment variables are only set if they haven't been set already.
+ * This ensures that any user-saved variables are never overwritten.
+ *
+ * This function must be called after relocation.
+ */
int mac_read_from_eeprom(void)
{
- int length, i;
- unsigned char dev = ID_EEPROM_ADDR;
- unsigned char *data;
- unsigned char ethaddr[4][18];
- unsigned char enetvar[32];
- unsigned int crc = 0;
-
- length = sizeof(EEPROM_data);
- if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) {
+ unsigned int i;
+
+ if (read_eeprom()) {
printf("Read failed.\n");
return -1;
}
- data = (unsigned char *)(&mac_data);
- crc = crc32(crc, data, length - 4);
- if (crc != mac_data.crc) {
+ if (!is_valid) {
+ printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]);
return -1;
- } else {
- for (i = 0; i < 4; i++) {
- if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) {
- sprintf((char *)ethaddr[i],
- "%02x:%02x:%02x:%02x:%02x:%02x",
- mac_data.mac[i][0],
- mac_data.mac[i][1],
- mac_data.mac[i][2],
- mac_data.mac[i][3],
- mac_data.mac[i][4],
- mac_data.mac[i][5]);
- sprintf((char *)enetvar,
- i ? "eth%daddr" : "ethaddr",
- i);
- setenv((char *)enetvar, (char *)ethaddr[i]);
- }
+ }
+
+ if (be32_to_cpu(e.crc) != 0xFFFFFFFF) {
+ u32 crc = crc32(0, (void *)&e, sizeof(e) - 4);
+
+ if (crc != be32_to_cpu(e.crc)) {
+ printf("CRC mismatch (%08x != %08x).\n", crc,
+ be32_to_cpu(e.crc));
+ return -1;
+ }
+ }
+
+ for (i = 0; i < min(4, e.mac_count); i++) {
+ if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
+ memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
+ char ethaddr[18];
+ char enetvar[9];
+
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ e.mac[i][0],
+ e.mac[i][1],
+ e.mac[i][2],
+ e.mac[i][3],
+ e.mac[i][4],
+ e.mac[i][5]);
+ sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i);
+ /* Only initialize environment variables that are blank
+ * (i.e. have not yet been set)
+ */
+ if (!getenv(enetvar))
+ setenv(enetvar, ethaddr);
}
}
+
return 0;
}
+
+#ifdef CFG_I2C_EEPROM_CCID
+
+/**
+ * get_cpu_board_revision - get the CPU board revision on 85xx boards
+ *
+ * Read the EEPROM to determine the board revision.
+ *
+ * This function is called before relocation, so we need to read a private
+ * copy of the EEPROM into a local variable on the stack.
+ *
+ * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM. The global
+ * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM,
+ * so that the SPD code will work. This means that all pre-relocation I2C
+ * operations can only occur on the CFG_SPD_BUS_NUM bus. So if
+ * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when
+ * this function is called. Oh well.
+ */
+unsigned int get_cpu_board_revision(void)
+{
+ struct board_eeprom {
+ u32 id; /* 0x00 - 0x03 EEPROM Tag 'CCID' */
+ u8 major; /* 0x04 Board revision, major */
+ u8 minor; /* 0x05 Board revision, minor */
+ } be;
+
+ i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+ (void *)&be, sizeof(be));
+
+ if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
+ return MPC85XX_CPU_BOARD_REV(0, 0);
+
+ if ((be.major == 0xff) && (be.minor == 0xff))
+ return MPC85XX_CPU_BOARD_REV(0, 0);
+
+ return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+}
+#endif
sdram->dacr0 =
SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32;
+ asm("nop");
/* Initialize DMR0 */
sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V;
+ asm("nop");
/* Set IP (bit 3) in DACR */
sdram->dacr0 |= SDRAMC_DARCn_IP;
/* Finish the configuration by issuing the MRS. */
sdram->dacr0 |= SDRAMC_DARCn_IMRS;
+ asm("nop");
/* Write to the SDRAM Mode Register */
*(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
printf ("Invalid DDR2 clock setting\n");
return -1;
}
- printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000);
- printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+ printf ("BUS: %lu MHz\n", get_board_bus_clk() / 1000000);
+ printf ("MEM: %lu MHz\n", gd->mem_clk / 1000000);
return 0;
}
#ifdef CFG_L2
l2cache_enable ();
#endif
- printf ("BUS: %d MHz\n", gd->bus_clk / 1000000);
- printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+ printf ("BUS: %lu MHz\n", gd->bus_clk / 1000000);
+ printf ("MEM: %lu MHz\n", gd->mem_clk / 1000000);
/*
* All the information needed to print the cache details is avaiblable
struct law_entry law_table[] = {
SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
- SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
if ((uint)&gur->porpllsr != 0xe00e0000) {
- printf("immap size error %x\n",&gur->porpllsr);
+ printf("immap size error %lx\n",(ulong)&gur->porpllsr);
}
- printf ("Board: MPC8544DS\n");
+ printf ("Board: MPC8544DS, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
+ in8(PIXIS_BASE + PIXIS_PVER));
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_64M, 1),
-#ifdef CFG_LBC_CACHE_BASE
/*
- * TLB 5: 64M Cacheable, non-guarded
- */
- SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 5, BOOKE_PAGESZ_64M, 1),
-#endif
- /*
- * TLB 6: 64M Non-cacheable, guarded
+ * TLB 5: 64M Non-cacheable, guarded
* 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
*/
SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_64M, 1),
+ 0, 5, BOOKE_PAGESZ_64M, 1),
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
lib_generic/zlib.o (.text)
+ drivers/bios_emulator/atibios.o (.text)
*(.text)
*(.fixup)
*(.got1)
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
- puts("Board: MPC8610HPCD\n");
+ printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
+ in8(PIXIS_BASE + PIXIS_PVER));
mcm->abcr |= 0x00010000; /* 0 */
mcm->hpmr3 = 0x80000008; /* 4c */
int checkboard(void)
{
- puts("Board: MPC8641HPCN\n");
-
+ printf ("Board: MPC8641HPCN, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
+ in8(PIXIS_BASE + PIXIS_PVER));
return 0;
}
*addr = (FPW) 0x00D000D0;
} else {
#ifdef DEBUG
- printf ("Timeout,0x%08x\n", status);
+ printf ("Timeout,0x%08lx\n", status);
#else
printf("Timeout\n");
#endif
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
return (2);
}
#ifdef DEBUG
*addr = (FPW) 0x00700070;
status = *addr;
- printf("## status=0x%08x, addr=0x%08x\n", status, addr);
+ printf("## status=0x%08lx, addr=0x%p\n", status, addr);
#endif
*addr = (FPW) 0x00500050; /* clear status register cmd */
*addr = (FPW) 0x00FF00FF; /* restore read mode */
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004-2008
+# Matrix-Vision GmbH, info@matrix-vision.de
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o fpga.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFF800000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * (C) Copyright 2008
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ACEX1K.h>
+#include <command.h>
+#include "fpga.h"
+#include "mvbc_p.h"
+
+#ifdef FPGA_DEBUG
+#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args)
+#else
+#define fpga_debug(fmt, args...)
+#endif
+
+Altera_CYC2_Passive_Serial_fns altera_fns = {
+ fpga_null_fn,
+ fpga_config_fn,
+ fpga_status_fn,
+ fpga_done_fn,
+ fpga_wr_fn,
+ fpga_null_fn,
+ fpga_null_fn,
+ 0
+};
+
+Altera_desc cyclone2 = {
+ Altera_CYC2,
+ passive_serial,
+ Altera_EP2C8_SIZE,
+ (void *) &altera_fns,
+ NULL,
+ 0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mvbc_p_init_fpga(void)
+{
+ fpga_debug("Initialize FPGA interface (reloc 0x%.8lx)\n",
+ gd->reloc_off);
+ fpga_init(gd->reloc_off);
+ fpga_add(fpga_altera, &cyclone2);
+ fpga_config_fn(0, 1, 0);
+ udelay(60);
+
+ return 1;
+}
+
+int fpga_null_fn(int cookie)
+{
+ return 0;
+}
+
+int fpga_config_fn(int assert, int flush, int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+ u32 dvo = gpio->simple_dvo;
+
+ fpga_debug("SET config : %s\n", assert ? "low" : "high");
+ if (assert)
+ dvo |= FPGA_CONFIG;
+ else
+ dvo &= ~FPGA_CONFIG;
+
+ if (flush)
+ gpio->simple_dvo = dvo;
+
+ return assert;
+}
+
+int fpga_done_fn(int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+ int result = 0;
+
+ udelay(10);
+ fpga_debug("CONF_DONE check ... ");
+ if (gpio->simple_ival & FPGA_CONF_DONE) {
+ fpga_debug("high\n");
+ result = 1;
+ } else
+ fpga_debug("low\n");
+
+ return result;
+}
+
+int fpga_status_fn(int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+ int result = 0;
+
+ fpga_debug("STATUS check ... ");
+ if (gpio->sint_ival & FPGA_STATUS) {
+ fpga_debug("high\n");
+ result = 1;
+ } else
+ fpga_debug("low\n");
+
+ return result;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+ u32 dvo = gpio->simple_dvo;
+
+ fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low");
+ if (assert_clk)
+ dvo |= FPGA_CCLK;
+ else
+ dvo &= ~FPGA_CCLK;
+
+ if (flush)
+ gpio->simple_dvo = dvo;
+
+ return assert_clk;
+}
+
+static inline int _write_fpga(u8 val)
+{
+ int i;
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+ u32 dvo = gpio->simple_dvo;
+
+ for (i=0; i<8; i++) {
+ dvo &= ~FPGA_CCLK;
+ gpio->simple_dvo = dvo;
+ dvo &= ~FPGA_DIN;
+ if (val & 1)
+ dvo |= FPGA_DIN;
+ gpio->simple_dvo = dvo;
+ dvo |= FPGA_CCLK;
+ gpio->simple_dvo = dvo;
+ val >>= 1;
+ }
+
+ return 0;
+}
+
+int fpga_wr_fn(void *buf, size_t len, int flush, int cookie)
+{
+ unsigned char *data = (unsigned char *) buf;
+ int i;
+
+ fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
+ for (i = 0; i < len; i++)
+ _write_fpga(data[i]);
+ fpga_debug("\n");
+
+ return FPGA_SUCCESS;
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+extern int mvbc_p_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_status_fn(int cookie);
+extern int fpga_config_fn(int assert, int flush, int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie);
+extern int fpga_null_fn(int cookie);
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2005-2007
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <malloc.h>
+#include <pci.h>
+#include <i2c.h>
+#include <environment.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include "fpga.h"
+#include "mvbc_p.h"
+
+#define SDRAM_MODE 0x00CD0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xD2322800
+#define SDRAM_CONFIG2 0x8AD70000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void sdram_start (int hi_addr)
+{
+ long hi_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 | hi_bit);
+
+ /* precharge all banks */
+ out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit);
+
+ /* precharge all banks */
+ out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit);
+
+ /* auto refresh */
+ out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 | hi_bit);
+
+ /* set mode register */
+ out_be32((u32*)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
+
+ /* normal operation */
+ out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit);
+}
+
+phys_addr_t initdram (int board_type)
+{
+ ulong dramsize = 0;
+ ulong test1,
+ test2;
+
+ /* setup SDRAM chip selects */
+ out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x0000001e);
+
+ /* setup config registers */
+ out_be32((u32*)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
+ out_be32((u32*)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else
+ dramsize = test2;
+
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ if (dramsize > 0)
+ out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1);
+ else
+ out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0);
+
+ return dramsize;
+}
+
+void mvbc_init_gpio(void)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+
+ printf("Ports : 0x%08x\n", gpio->port_config);
+ printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
+
+ out_be32(&gpio->simple_ddr, SIMPLE_DDR);
+ out_be32(&gpio->simple_dvo, SIMPLE_DVO);
+ out_be32(&gpio->simple_ode, SIMPLE_ODE);
+ out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN);
+
+ out_be32((u32*)&gpio->sint_ode, SINT_ODE);
+ out_be32((u32*)&gpio->sint_ddr, SINT_DDR);
+ out_be32((u32*)&gpio->sint_dvo, SINT_DVO);
+ out_be32((u32*)&gpio->sint_inten, SINT_INTEN);
+ out_be32((u32*)&gpio->sint_itype, SINT_ITYPE);
+ out_be32((u32*)&gpio->sint_gpioe, SINT_GPIOEN);
+
+ out_8((u8*)MPC5XXX_WU_GPIO_ODE, WKUP_ODE);
+ out_8((u8*)MPC5XXX_WU_GPIO_DIR, WKUP_DIR);
+ out_8((u8*)MPC5XXX_WU_GPIO_DATA_O, WKUP_DO);
+ out_8((u8*)MPC5XXX_WU_GPIO_ENABLE, WKUP_EN);
+
+ printf("simple_gpioe: 0x%08x\n", gpio->simple_gpioe);
+ printf("sint_gpioe : 0x%08x\n", gpio->sint_gpioe);
+}
+
+void reset_environment(void)
+{
+ char *s, sernr[64];
+
+ printf("\n*** RESET ENVIRONMENT ***\n");
+ memset(sernr, 0, sizeof(sernr));
+ s = getenv("serial#");
+ if (s) {
+ printf("found serial# : %s\n", s);
+ strncpy(sernr, s, 64);
+ }
+ gd->env_valid = 0;
+ env_relocate();
+ if (s)
+ setenv("serial#", sernr);
+}
+
+int misc_init_r(void)
+{
+ char *s = getenv("reset_env");
+
+ if (!s) {
+ if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6)
+ return 0;
+ udelay(50000);
+ if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6)
+ return 0;
+ udelay(50000);
+ if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6)
+ return 0;
+ }
+ printf(" === FACTORY RESET ===\n");
+ reset_environment();
+ saveenv();
+
+ return -1;
+}
+
+int checkboard(void)
+{
+ mvbc_init_gpio();
+ printf("Board: Matrix Vision mvBlueCOUGAR-P\n");
+
+ return 0;
+}
+
+void flash_preinit(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write
+ * access for detection process.
+ * Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+ clrbits_be32((u32*)MPC5XXX_BOOTCS_CFG, 0x1);
+}
+
+void flash_afterinit(ulong size)
+{
+ out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CFG_BOOTCS_START |
+ size));
+ out_be32((u32*)MPC5XXX_CS0_START, START_REG(CFG_BOOTCS_START |
+ size));
+ out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CFG_BOOTCS_START | size,
+ size));
+ out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CFG_BOOTCS_START | size,
+ size));
+}
+
+void pci_mvbc_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char line = 0xff;
+ u32 base;
+
+ if (PCI_BUS(dev) == 0) {
+ switch (PCI_DEV (dev)) {
+ case 0xa: /* FPGA */
+ line = 3;
+ pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &base);
+ printf("found FPA - enable arbitration\n");
+ writel(0x03, (u32*)(base + 0x80c0));
+ writel(0xf0, (u32*)(base + 0x8080));
+ break;
+ case 0xb: /* LAN */
+ line = 2;
+ break;
+ case 0x1a:
+ break;
+ default:
+ printf ("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV (dev));
+ break;
+ }
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line);
+ }
+}
+
+struct pci_controller hose = {
+ fixup_irq:pci_mvbc_fixup_irq
+};
+
+int mvbc_p_load_fpga(void)
+{
+ size_t data_size = 0;
+ void *fpga_data = NULL;
+ char *datastr = getenv("fpgadata");
+ char *sizestr = getenv("fpgadatasize");
+
+ if (datastr)
+ fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
+ if (sizestr)
+ data_size = (size_t)simple_strtoul(sizestr, NULL, 16);
+
+ return fpga_load(0, fpga_data, data_size);
+}
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ char *s;
+ int load_fpga = 1;
+
+ mvbc_p_init_fpga();
+ s = getenv("skip_fpga");
+ if (s) {
+ printf("found 'skip_fpga' -> FPGA _not_ loaded !\n");
+ load_fpga = 0;
+ }
+ if (load_fpga) {
+ printf("loading FPGA ... ");
+ mvbc_p_load_fpga();
+ printf("done\n");
+ }
+ pci_mpc5xxx_init(&hose);
+}
+
+u8 *dhcp_vendorex_prep(u8 *e)
+{
+ char *ptr;
+
+ /* DHCP vendor-class-identifier = 60 */
+ if ((ptr = getenv("dhcp_vendor-class-identifier"))) {
+ *e++ = 60;
+ *e++ = strlen(ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+ /* DHCP_CLIENT_IDENTIFIER = 61 */
+ if ((ptr = getenv("dhcp_client_id"))) {
+ *e++ = 61;
+ *e++ = strlen(ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+
+ return e;
+}
+
+u8 *dhcp_vendorex_proc (u8 *popt)
+{
+ return NULL;
+}
+
+void show_boot_progress(int val)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+
+ switch(val) {
+ case 0: /* FPGA ok */
+ setbits_be32(&gpio->simple_dvo, 0x80);
+ break;
+ case 1:
+ setbits_be32(&gpio->simple_dvo, 0x40);
+ break;
+ case 12:
+ setbits_be32(&gpio->simple_dvo, 0x20);
+ break;
+ case 15:
+ setbits_be32(&gpio->simple_dvo, 0x10);
+ break;
+ default:
+ break;
+ }
+
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
--- /dev/null
+#ifndef __MVBC_H__
+#define __MVBC_H__
+
+#define LED_G0 MPC5XXX_GPIO_SIMPLE_PSC2_0
+#define LED_G1 MPC5XXX_GPIO_SIMPLE_PSC2_1
+#define LED_Y MPC5XXX_GPIO_SIMPLE_PSC2_2
+#define LED_R MPC5XXX_GPIO_SIMPLE_PSC2_3
+#define ARB_X_EN MPC5XXX_GPIO_WKUP_PSC2_4
+
+#define FPGA_DIN MPC5XXX_GPIO_SIMPLE_PSC3_0
+#define FPGA_CCLK MPC5XXX_GPIO_SIMPLE_PSC3_1
+#define FPGA_CONF_DONE MPC5XXX_GPIO_SIMPLE_PSC3_2
+#define FPGA_CONFIG MPC5XXX_GPIO_SIMPLE_PSC3_3
+#define FPGA_STATUS MPC5XXX_GPIO_SINT_PSC3_4
+
+#define MAN_RST MPC5XXX_GPIO_WKUP_PSC6_0
+#define WD_TS MPC5XXX_GPIO_WKUP_PSC6_1
+#define WD_WDI MPC5XXX_GPIO_SIMPLE_PSC6_2
+#define COP_PRESENT MPC5XXX_GPIO_SIMPLE_PSC6_3
+#define FACT_RST MPC5XXX_GPIO_WKUP_6
+#define FLASH_RBY MPC5XXX_GPIO_WKUP_7
+
+#define SIMPLE_DDR (LED_G0 | LED_G1 | LED_Y | LED_R | \
+ FPGA_DIN | FPGA_CCLK | FPGA_CONFIG | WD_WDI)
+#define SIMPLE_DVO (FPGA_CONFIG)
+#define SIMPLE_ODE (FPGA_CONFIG)
+#define SIMPLE_GPIOEN (LED_G0 | LED_G1 | LED_Y | LED_R | \
+ FPGA_DIN | FPGA_CCLK | FPGA_CONF_DONE | FPGA_CONFIG |\
+ WD_WDI | COP_PRESENT)
+
+#define SINT_ODE 0
+#define SINT_DDR 0
+#define SINT_DVO 0
+#define SINT_INTEN 0
+#define SINT_ITYPE 0
+#define SINT_GPIOEN (FPGA_STATUS)
+
+#define WKUP_ODE (MAN_RST)
+#define WKUP_DIR (ARB_X_EN|MAN_RST|WD_TS)
+#define WKUP_DO (ARB_X_EN|MAN_RST|WD_TS)
+#define WKUP_EN (ARB_X_EN|MAN_RST|WD_TS|FACT_RST|FLASH_RBY)
+
+#endif
--- /dev/null
+echo
+echo "==== running autoscript ===="
+echo
+setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram}
+setenv ramkernel setenv kernel_boot \${loadaddr}
+setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
+setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length}
+setenv bootfromflash run flashkernel cpird ramparam addcons e1000para bootdtb
+setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
+setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
+setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup
+setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel
+if test ${console} = yes;
+then
+setenv addcons setenv bootargs \${bootargs} console=ttyPSC\${console_nr},\${baudrate}N8
+else
+setenv addcons setenv bootargs \${bootargs} console=tty0
+fi
+setenv e1000para setenv bootargs \${bootargs} e1000.TxDescriptors=1500 e1000.SmartPowerDownEnable=1
+setenv set_static_ip setenv ipaddr \${static_ipaddr}
+setenv set_static_nm setenv netmask \${static_netmask}
+setenv set_static_gw setenv gatewayip \${static_gateway}
+setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
+setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs
+if test ${autoscr_boot} != no;
+then
+ if test ${netboot} = yes;
+ then
+ bootp
+ if test $? = 0;
+ then
+ echo "=== bootp succeeded -> netboot ==="
+ run set_ip
+ run getdtb rundtb bootfromnet ramparam addcons e1000para bootdtb
+ else
+ echo "=== netboot failed ==="
+ fi
+ fi
+ run set_static_ip set_static_nm set_static_gw set_ip
+ echo "=== bootfromflash ==="
+ run cpdtb rundtb bootfromflash
+else
+ echo "=== boot stopped with autoscr_boot no ==="
+fi
aufile[i], sz, image_get_header_size ());
if (sz != ausize[i]) {
- printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz);
+ printf ("%s: size %ld read %ld?\n", aufile[i], ausize[i], sz);
continue;
}
unsigned long long result;
int rc = ERR_OK;
- result=*addr;
+ result = *addr;
if ((result & data) != data)
return ERR_NOT_ERASED;
eieio();
do {
- result=*addr;
+ result = *addr;
} while(~result & BIT_BUSY);
*addr=CMD_READ_ARRAY;
}
while(cnt>=8) {
- data=*((unsigned long long *)src);
+ data = *((unsigned long long *)src);
if ((rc = write_word(info, wp, data)) != 0)
return rc;
src+=8;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr);
return (2);
}
/*
cnt -= FLASH_BLOCK_SIZE;
if (((count-cnt)>>10)>temp) {
temp=(count-cnt)>>10;
- printf("\r%d KB",temp);
+ printf("\r%lu KB",temp);
}
}
printf("\n");
}
}
if (csr & 0x4040) {
- printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+ printf ("CSR indicates write error (%04lx) at %08lx\n",
+ csr, (ulong)addr);
flag = 1;
}
/* Clear Status Registers Command */
}
}
if (csr & 0x4040) {
- printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+ printf ("CSR indicates write error (%04lx) at %08lx\n",
+ csr, (ulong)addr);
flag = 1;
}
/* Clear Status Registers Command */
unsigned off;
uchar *name, *value;
- name=&name_buf[0];
- value=&value_buf[0];
+ name = &name_buf[0];
+ value = &value_buf[0];
len=size;
off = sizeof(long);
while (len > off) {
if(c == '\0')
break;
} while(len > off);
- name=&name_buf[0];
- value=&value_buf[0];
+ name = &name_buf[0];
+ value = &value_buf[0];
if(strncmp((char *)name,"baudrate",8)!=0) {
setenv((char *)name,(char *)value);
}
++s;
break;
}
- buf[i++]=*s;
+ buf[i++] = *s;
}
sprintf(&buf[i]," SN ");
i+=4;
for (; s < e; ++s) {
- buf[i++]=*s;
+ buf[i++] = *s;
}
buf[i++]=0;
}
unsigned long size_b1,flashcr,size_reg;
int mode;
extern char version_string;
- char *p=&version_string;
+ char *p = &version_string;
/* Since we are relocated, we can set-up the CS finally */
setup_cs_reloc();
int val;
unsigned char status;
- val=-1;
+ val = -1;
status = kbd_read_status();
if (status & KBD_STAT_OBF) {
val = kbd_read_input();
uhci_td_t *td,*prevtd;
for(i=0;i<8;i++) {
- prevtd=&td_int[i]; /* the first previous td is the skeleton td */
+ prevtd = &td_int[i]; /* the first previous td is the skeleton td */
link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
td=(uhci_td_t *)link; /* assign it */
/* all interrupt TDs are finally linked to the td_int[0].
return 1;
irq_free_handler(irqvec);
reset_hc();
- irqvec=-1;
+ irqvec = -1;
return 0;
}
setenv("install", string);
sprintf(string, "setenv bootargs emac(0,0)c:%s/%s_sw_inst "
"e=${ipaddr} h=${serverip} f=0x1000; "
- "bootvx ${loadaddr}\0",
- board_name, board_name);
+ "bootvx ${loadaddr}%c",
+ board_name, board_name, 0);
setenv("boot_sw_inst", string);
}
}
gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
gd->bd->bi_enetaddr[5] = hcu_get_slot();
- sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X%c",
gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
- gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+ gd->bd->bi_enetaddr[4],
+ gd->bd->bi_enetaddr[5],
+ 0) ;
printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
ethaddr, serial);
setenv(DEFAULT_ETH_ADDR, ethaddr);
}
get_sys_info(&board_cfg);
- printf(", %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+ printf(", %lu MHz", (board_cfg.freqPLB * 2) / 1000000);
mfsdram(DDR0_03, val);
val = DDR0_03_CASLAT_DECODE(val);
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
return (ctrlc());
}
#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- u32 val[4];
- int rc;
-
- ft_cpu_setup(blob, bd);
-
- /* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
- val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
- if (rc)
- printf("Unable to update property NOR mapping, err=%s\n",
- fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
}
printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev);
- printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id]);
+ printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id].name);
/* Fix the ack in the bme 32 */
udelay(5000);
#include <ioports.h>
#include <spd_sdram.h>
#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
long int fixed_sdram (void);
#ifndef CFG_RAMBOOT
volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+#if (CFG_SDRAM_SIZE == 512)
+ ddr->cs0_bnds = 0x0000000f;
+#else
ddr->cs0_bnds = 0x00000007;
+#endif
ddr->cs1_bnds = 0x0010001f;
ddr->cs2_bnds = 0x00000000;
ddr->cs3_bnds = 0x00000000;
return CFG_SDRAM_SIZE * 1024 * 1024;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+#ifdef CONFIG_PCI
+ const char *path;
+#endif
+
+ ft_cpu_setup(blob, bd);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose.last_busno - hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
*
* Always return 1
*/
+#if defined(CONFIG_QS850)
+#define BOARD_IDENTITY "QS850"
+#elif defined(CONFIG_QS823)
+#define BOARD_IDENTITY "QS823"
+#else
+#define BOARD_IDENTITY "QS???"
+#endif
int checkboard (void)
{
i = getenv_r("serial#", buf, sizeof(buf));
s = (i>0) ? buf : NULL;
-#ifdef CONFIG_QS850
- if (!s || strncmp(s, "QS850", 5)) {
- puts ("### No HW ID - assuming QS850");
-#endif
-#ifdef CONFIG_QS823
- if (!s || strncmp(s, "QS823", 5)) {
- puts ("### No HW ID - assuming QS823");
-#endif
+ if (!s || strncmp(s, BOARD_IDENTITY, 5)) {
+ puts ("### No HW ID - assuming " BOARD_IDENTITY);
} else {
for (e=s; *e; ++e) {
if (*e == ' ')
HPI_HPIA_1 = addr1;
HPI_HPIA_2 = addr2;
- debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count));
+ debugX(4, "writing from data=0x%lx to 0x%lx\n",
+ (ulong)data, (ulong)(data+count));
for(i=0; i<count; i++) {
HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff);
puts ("Board: Total5100 ");
#endif
-/*
- * Retrieve FPGA Revision.
- */
-printf ("(FPGA %08X)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
+ /*
+ * Retrieve FPGA Revision.
+ */
+ printf ("(FPGA %08lX)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
-/*
- * Take all peripherals in power-up mode.
- */
+ /*
+ * Take all peripherals in power-up mode.
+ */
#if CONFIG_TOTAL5200_REV==2
*(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70;
#else
psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE);
for(i = 0;i < (len / 4); i++) {
- swapped[3]=*wave_file++;
- swapped[2]=*wave_file++;
- swapped[1]=*wave_file++;
- swapped[0]=*wave_file++;
+ swapped[3] = *wave_file++;
+ swapped[2] = *wave_file++;
+ swapped[1] = *wave_file++;
+ swapped[0] = *wave_file++;
psc->psc_buffer_32 = *((unsigned long*)swapped);
while (psc->tfnum > 400) {
if(ctrlc())
}
set_attenuation(volume);
- printf("Play wave file at %#p with length %#x\n", addr, length);
+ printf("Play wave file at %lX with length %lX\n", addr, length);
rcode = i2s_play_wave(addr, length);
return rcode;
printf ("ethaddr: %s\n", hw->ethaddr);
printf ("FLASH : %x nr:%d\n", hw->flash, hw->flash_nr);
printf ("RAM : %x cs:%d\n", hw->ram, hw->ram_cs);
- printf ("CPU : %d\n", hw->cpunr);
+ printf ("CPU : %lu\n", hw->cpunr);
printf ("CAN : %d\n", hw->can);
if (hw->eeprom) printf ("EEprom : %x\n", hw->eeprom);
else printf ("No EEprom\n");
printf ("Bus %s mode.\n", (hw->Bus ? "60x" : "Single PQII"));
printf (" real : %s\n", (immr->im_siu_conf.sc_bcr & BCR_EBM ? \
"60x" : "Single PQII"));
- printf ("Option : %x\n", hw->option);
+ printf ("Option : %lx\n", hw->option);
printf ("%s Security Engine\n", (hw->SecEng ? "with" : "no"));
printf ("CPM Clk: %d\n", hw->cpmcl);
printf ("CPU Clk: %d\n", hw->cpucl);
if (lbc_mhz < 66) {
lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
- lbc->ltedr = 0xa4c80000; /* DK: !!! */
+ lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTERD_WARA |
+ LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */
} else if (lbc_mhz >= 133) {
lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr);
return (2);
}
break;
}
if(get_delta(start) > timeout) {
- DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
+ DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event);
return 0xff000000;
}
puts ("\nip_addr = ");
print_IPaddr (bd->bi_ip_addr);
#endif
- printf ("\nbaudrate = %d bps\n", (ulong)bd->bi_baudrate);
+ printf ("\nbaudrate = %ld bps\n", (ulong)bd->bi_baudrate);
return 0;
}
#include <lmb.h>
#include <asm/byteorder.h>
+#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#include <usb.h>
+#endif
+
#ifdef CFG_HUSH_PARSER
#include <hush.h>
#endif
*/
iflag = disable_interrupts();
+#if (CONFIG_COMMANDS & CFG_CMD_USB)
+ /*
+ * turn off USB to prevent the host controller from writing to the
+ * SDRAM while Linux is booting. This could happen (at least for OHCI
+ * controller), because the HCCA (Host Controller Communication Area)
+ * lies within the SDRAM and the host controller writes continously to
+ * this area (as busmaster!). The HccaFrameNumber is for example
+ * updated every 1 ms within the HCCA structure in SDRAM! For more
+ * details see the OpenHCI specification.
+ */
+ usb_stop();
+#endif
+
+
#ifdef CONFIG_AMIGAONEG3SE
/*
* We've possible left the caches enabled during
if(readblk>blocks) /* is end within 1st track */
readblk=blocks; /* yes, correct it */
PRINTF("we read %ld blocks start %ld\n",readblk,pCMD->blnr);
- bufferw=&buffer[0]; /* setup working buffer */
+ bufferw = &buffer[0]; /* setup working buffer */
do {
retryrw:
len=sect_size * readblk;
* we need to get the results */
fdc_terminate(pCMD);
offset+=(sect_size*readblk); /* set up buffer pointer */
- bufferw=&buffer[offset];
+ bufferw = &buffer[offset];
pCMD->blnr+=readblk; /* update current block nr */
blocks-=readblk; /* update blocks */
if(blocks==0)
s_last [bank] = -1; /* last sector to erase */
}
- for (bank=0,info=&flash_info[0];
+ for (bank=0,info = &flash_info[0];
(bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last);
++bank, ++info) {
ulong b_end;
addr_last = addr_first + part->size - 1;
printf ("Erase Flash Parition %s, "
- "bank %d, 0x%08lx - 0x%08lx ",
+ "bank %ld, 0x%08lx - 0x%08lx ",
argv[1], bank, addr_first,
addr_last);
s_first, s_last, &planned );
if (planned && (rcode == 0)) {
- for (bank=0,info=&flash_info[0];
+ for (bank=0,info = &flash_info[0];
(bank < CFG_MAX_FLASH_BANKS) && (rcode == 0);
++bank, ++info) {
if (s_first[bank]>=0) {
addr_last = addr_first + part->size - 1;
printf ("%sProtect Flash Parition %s, "
- "bank %d, 0x%08lx - 0x%08lx\n",
+ "bank %ld, 0x%08lx - 0x%08lx\n",
p ? "" : "Un", argv[1],
bank, addr_first, addr_last);
protected = 0;
if (planned && (rcode == 0)) {
- for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
+ for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
if (info->flash_id == FLASH_UNKNOWN) {
continue;
}
length = (*dataptr << 8) + *(dataptr+1);
dataptr+=2;
for(i=0;i<length;i++)
- buffer[i]=*dataptr++;
+ buffer[i] = *dataptr++;
printf(" design filename = \"%s\"\n", buffer);
length = (*dataptr << 8) + *(dataptr+1);
dataptr+=2;
for(i=0;i<length;i++)
- buffer[i]=*dataptr++;
+ buffer[i] = *dataptr++;
printf(" part number = \"%s\"\n", buffer);
/* get date (identifier, length, string) */
length = (*dataptr << 8) + *(dataptr+1);
dataptr+=2;
for(i=0;i<length;i++)
- buffer[i]=*dataptr++;
+ buffer[i] = *dataptr++;
printf(" date = \"%s\"\n", buffer);
/* get time (identifier, length, string) */
length = (*dataptr << 8) + *(dataptr+1);
dataptr+=2;
for(i=0;i<length;i++)
- buffer[i]=*dataptr++;
+ buffer[i] = *dataptr++;
printf(" time = \"%s\"\n", buffer);
/* get fpga data length (identifier, length) */
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CFG_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE read: device %d block # %qd, count %ld ... ",
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CFG_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE write: device %d block # %qd, count %ld ... ",
#define SIZE_KB ((u32)1024)
if ((size % SIZE_GB) == 0)
- sprintf(buf, "%lug", size/SIZE_GB);
+ sprintf(buf, "%ug", size/SIZE_GB);
else if ((size % SIZE_MB) == 0)
- sprintf(buf, "%lum", size/SIZE_MB);
+ sprintf(buf, "%um", size/SIZE_MB);
else if (size % SIZE_KB == 0)
- sprintf(buf, "%luk", size/SIZE_KB);
+ sprintf(buf, "%uk", size/SIZE_KB);
else
- sprintf(buf, "%lu", size);
+ sprintf(buf, "%u", size);
}
/**
part->size = id->size - part->offset;
if (part->offset > id->size) {
- printf("%s: offset %08lx beyond flash size %08lx\n",
+ printf("%s: offset %08x beyond flash size %08x\n",
id->mtd_id, part->offset, id->size);
return 1;
}
if (current_dev) {
part = jffs2_part_info(current_dev, current_partnum);
if (part) {
- printf("\nactive partition: %s%d,%d - (%s) 0x%08lx @ 0x%08lx\n",
+ printf("\nactive partition: %s%d,%d - (%s) 0x%08x @ 0x%08x\n",
MTD_DEV_TYPE(current_dev->id->type),
current_dev->id->num, current_partnum,
part->name, part->size, part->offset);
return 1;
}
- printf ("%01x: 0x%08lx - %s %s read\n", fslnum, num,
+ printf ("%01x: 0x%08x - %s %s read\n", fslnum, num,
blocking < 2 ? "non blocking" : "blocking",
((blocking == 1) || (blocking == 3)) ? "control" : "data" );
return 0;
return 1;
}
- printf ("%01x: 0x%08lx - %s %s write\n", fslnum, num,
+ printf ("%01x: 0x%08x - %s %s write\n", fslnum, num,
blocking < 2 ? "non blocking" : "blocking",
((blocking == 1) || (blocking == 3)) ? "control" : "data" );
return 0;
puts ("Unsupported register\n");
return 1;
}
- printf (": 0x%08lx\n", val);
+ printf (": 0x%08x\n", val);
return 0;
}
cpuid = simple_strtoul(argv[1], NULL, 10);
if (cpuid >= CONFIG_NR_CPUS) {
- printf ("Core num: %d is out of range[0..%d]\n",
+ printf ("Core num: %lu is out of range[0..%d]\n",
cpuid, CONFIG_NR_CPUS - 1);
return 1;
}
return 1;
}
- printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
+ printf ("\nNAND %s: device %d offset %ld, size %lu ...\n",
(cmd & NANDRW_READ) ? "read" : "write",
- curr_device, off, size);
+ curr_device, off, (ulong)size);
ret = nand_legacy_rw (nand_dev_desc + curr_device,
cmd, off, size,
}
}
- printf("\nEnvironment size: %d/%d bytes\n", i, ENV_SIZE);
+ printf("\nEnvironment size: %d/%ld bytes\n",
+ i, (ulong)ENV_SIZE);
return 0;
}
if (!end || end < 0)
end = start;
- printf("Erase block from %d to %d\n", start, end);
+ printf("Erase block from %lu to %lu\n", start, end);
for (block = start; block <= end; block++) {
instr.addr = block << onenand_chip.erase_shift;
instr.len = 1 << onenand_chip.erase_shift;
ret = onenand_erase(&onenand_mtd, &instr);
if (ret) {
- printf("erase failed %d\n", block);
+ printf("erase failed %lu\n", block);
break;
}
}
puts ("\nMPC5200 registers\n");
printf ("MBAR=%08x\n", CFG_MBAR);
puts ("Memory map registers\n");
- printf ("\tCS0: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS0: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS0_START,
*(volatile ulong*)MPC5XXX_CS0_STOP,
*(volatile ulong*)MPC5XXX_CS0_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00010000) ? 1 : 0);
- printf ("\tCS1: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS1: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS1_START,
*(volatile ulong*)MPC5XXX_CS1_STOP,
*(volatile ulong*)MPC5XXX_CS1_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00020000) ? 1 : 0);
- printf ("\tCS2: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS2: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS2_START,
*(volatile ulong*)MPC5XXX_CS2_STOP,
*(volatile ulong*)MPC5XXX_CS2_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00040000) ? 1 : 0);
- printf ("\tCS3: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS3: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS3_START,
*(volatile ulong*)MPC5XXX_CS3_STOP,
*(volatile ulong*)MPC5XXX_CS3_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00080000) ? 1 : 0);
- printf ("\tCS4: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS4: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS4_START,
*(volatile ulong*)MPC5XXX_CS4_STOP,
*(volatile ulong*)MPC5XXX_CS4_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00100000) ? 1 : 0);
- printf ("\tCS5: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS5: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS5_START,
*(volatile ulong*)MPC5XXX_CS5_STOP,
*(volatile ulong*)MPC5XXX_CS5_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00200000) ? 1 : 0);
- printf ("\tCS6: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS6: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS6_START,
*(volatile ulong*)MPC5XXX_CS6_STOP,
*(volatile ulong*)MPC5XXX_CS6_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x04000000) ? 1 : 0);
- printf ("\tCS7: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS7: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_CS7_START,
*(volatile ulong*)MPC5XXX_CS7_STOP,
*(volatile ulong*)MPC5XXX_CS7_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x08000000) ? 1 : 0);
- printf ("\tBOOTCS: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tBOOTCS: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
*(volatile ulong*)MPC5XXX_BOOTCS_START,
*(volatile ulong*)MPC5XXX_BOOTCS_STOP,
*(volatile ulong*)MPC5XXX_BOOTCS_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x02000000) ? 1 : 0);
- printf ("\tSDRAMCS0: %08X\n",
+ printf ("\tSDRAMCS0: %08lX\n",
*(volatile ulong*)MPC5XXX_SDRAM_CS0CFG);
- printf ("\tSDRAMCS1: %08X\n",
+ printf ("\tSDRAMCS1: %08lX\n",
*(volatile ulong*)MPC5XXX_SDRAM_CS1CFG);
#elif defined(CONFIG_MPC86xx)
mpc86xx_reginfo();
if(scsi_max_devs>0)
scsi_curr_dev=0;
else
- scsi_curr_dev=-1;
+ scsi_curr_dev = -1;
}
#include <usb.h>
#ifdef CONFIG_USB_STORAGE
-static int usb_stor_curr_dev=-1; /* current device */
+static int usb_stor_curr_dev = -1; /* current device */
#endif
/* some display routines (info command) */
device_t *dev = NULL;
char temp_names[3][8];
- dev_index=-1;
+ dev_index = -1;
for (i=1; i<=ListNumItems(devlist); i++) {
dev = ListGetPtrToItem (devlist, i);
if(strcmp(dev->name,devname)==0) {
instr.addr = env_addr;
instr.addr -= (unsigned long)onenand_chip.base;
if (onenand_erase(&onenand_mtd, &instr)) {
- printf("OneNAND: erase failed at 0x%08x\n", env_addr);
+ printf("OneNAND: erase failed at 0x%08lx\n", env_addr);
return 1;
}
prop, compat, fdt_strerror(err));
}
#endif /* CONFIG_HAS_FSL_DR_USB */
+
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx)
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an mpc8xxxE processor
+ */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ const struct sec_rev_prop {
+ u32 sec_rev;
+ u32 num_channels;
+ u32 channel_fifo_len;
+ u32 exec_units_mask;
+ u32 descriptor_types_mask;
+ } sec_rev_prop_list [] = {
+ { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+ { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+ { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+ { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+ { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+ { 0x0303, 4, 24, 0x97c, 0x03ab0abf }, /* SEC 3.3 */
+ };
+ char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+ sizeof("fsl,secX.Y")];
+ int crypto_node, sec_idx, err;
+ char *p;
+ u32 val;
+
+ /* locate crypto node based on lowest common compatible */
+ crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+ if (crypto_node == -FDT_ERR_NOTFOUND)
+ return;
+
+ /* delete it if not on an E-processor */
+ if (crypto_node > 0 && !sec_rev) {
+ fdt_del_node(blob, crypto_node);
+ return;
+ }
+
+ /* else we got called for possible uprev */
+ for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+ if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+ break;
+
+ if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+ puts("warning: unknown SEC revision number\n");
+ return;
+ }
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+ err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+ err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = 0;
+ while (sec_idx >= 0) {
+ p = compat_strlist + val;
+ val += sprintf(p, "fsl,sec%d.%d",
+ (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+ sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+ sec_idx--;
+ }
+ err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+}
+#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */
flash_info_t *info;
int i;
- for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+ for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
if (info->flash_id != FLASH_UNKNOWN &&
addr >= info->start[0] &&
/* WARNING - The '- 1' is needed if the flash
static int static_get(struct in_str *i)
{
- int ch=*i->p++;
+ int ch = *i->p++;
if (ch=='\0') return EOF;
return ch;
}
ch = 0;
/* If there is data waiting, eat it up */
if (i->p && *i->p) {
- ch=*i->p++;
+ ch = *i->p++;
} else {
/* need to double check i->file because we might be doing something
* more complicated by now, like sourcing or substituting. */
i->__promptme = 0;
#endif
if (i->p && *i->p) {
- ch=*i->p++;
+ ch = *i->p++;
}
#ifndef __U_BOOT__
} else {
cfg_noffset = fit_conf_get_node (fit_hdr, fit_uname_config);
if (cfg_noffset < 0) {
debug ("* ramdisk: no such config\n");
- return 0;
+ return 1;
}
rd_noffset = fit_conf_get_ramdisk_node (fit_hdr, cfg_noffset);
if (rd_noffset < 0) {
debug ("* ramdisk: no ramdisk in config\n");
- return 0;
+ return 1;
}
}
#endif
if (!fit_check_format (fit_hdr)) {
puts ("Bad FIT ramdisk image format!\n");
show_boot_progress (-120);
- return 0;
+ return 1;
}
show_boot_progress (121);
if (cfg_noffset < 0) {
puts ("Could not find configuration node\n");
show_boot_progress (-122);
- return 0;
+ return 1;
}
fit_uname_config = fdt_get_name (fit_hdr, cfg_noffset, NULL);
printf (" Using '%s' configuration\n", fit_uname_config);
if (rd_noffset < 0) {
puts ("Could not find subimage node\n");
show_boot_progress (-124);
- return 0;
+ return 1;
}
printf (" Trying '%s' ramdisk subimage\n", fit_uname_ramdisk);
show_boot_progress (125);
if (!fit_check_ramdisk (fit_hdr, rd_noffset, arch, images->verify))
- return 0;
+ return 1;
/* get ramdisk image data address and length */
if (fit_image_get_data (fit_hdr, rd_noffset, &data, &size)) {
puts ("Could not find ramdisk subimage data!\n");
show_boot_progress (-127);
- return 0;
+ return 1;
}
show_boot_progress (128);
if (fit_image_get_load (fit_hdr, rd_noffset, &rd_load)) {
puts ("Can't get ramdisk subimage load address!\n");
show_boot_progress (-129);
- return 0;
+ return 1;
}
show_boot_progress (129);
debug ("Logo: width %d height %d colors %d cmap %d\n",
BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS,
- sizeof(bmp_logo_palette)/(sizeof(ushort)));
+ (int)(sizeof(bmp_logo_palette)/(sizeof(ushort))));
bmap = &bmp_logo_bitmap[0];
fb = (uchar *)(lcd_base + y * lcd_line_length + x);
WATCHDOG_RESET();
for (j = 0; j < width ; j++)
#if defined(CONFIG_PXA250)
- *(fb++)=*(bmap++);
+ *(fb++) = *(bmap++);
#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
*(fb++)=255-*(bmap++);
#endif
for(i=0; i<dev->config.bNumInterfaces;i++) {
for(ii=0; ii<dev->config.if_desc[i].bNumEndpoints; ii++) {
- ep=&dev->config.if_desc[i].ep_desc[ii];
+ ep = &dev->config.if_desc[i].ep_desc[ii];
b=ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
if((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)==USB_ENDPOINT_XFER_CONTROL) { /* Control => bidirectional */
if (size <= 0 || !buf || !index)
return -1;
buf[0] = 0;
- tbuf=&mybuf[0];
+ tbuf = &mybuf[0];
/* get langid for strings if it's not yet known */
if (!dev->have_langid) {
/* first make all devices unknown */
for(i=0;i<USB_MAX_DEVICE;i++) {
memset(&usb_dev[i],0,sizeof(struct usb_device));
- usb_dev[i].devnum=-1;
+ usb_dev[i].devnum = -1;
}
dev_index=0;
/* device 0 is always present (root hub, so let it analyze) */
return -1;
}
printf(" report descriptor (size %u, read %d)\n", len, index);
- start=&buffer[0];
- end=&buffer[len];
+ start = &buffer[0];
+ end = &buffer[len];
i=0;
do {
index=fetch_item(start,end,&item);
ccb reqsrb;
int retry,notready;
- psrb=&reqsrb;
+ psrb = &reqsrb;
status=USB_STOR_TRANSPORT_GOOD;
retry=0;
notready=0;
psrb->cmd[1]=srb->lun<<5;
psrb->cmd[4]=18;
psrb->datalen=18;
- psrb->pdata=&srb->sense_buf[0];
+ psrb->pdata = &srb->sense_buf[0];
psrb->cmdlen=12;
/* issue the command */
result=usb_stor_CB_comdat(psrb,us);
srb->cmd[1]=srb->lun<<5;
srb->cmd[4]=18;
srb->datalen=18;
- srb->pdata=&srb->sense_buf[0];
+ srb->pdata = &srb->sense_buf[0];
srb->cmdlen=12;
ss->transport(srb,ss);
USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]);
return (0);
}
-void icache_enable (void)
+/* cache_bit must be either C1_IC or C1_DC */
+static void cache_enable(uint32_t cache_bit)
{
- ulong reg;
+ uint32_t reg;
- reg = read_p15_c1 (); /* get control reg. */
- cp_delay ();
- write_p15_c1 (reg | C1_IC);
+ reg = read_p15_c1(); /* get control reg. */
+ cp_delay();
+ write_p15_c1(reg | cache_bit);
}
-void icache_disable (void)
+/* cache_bit must be either C1_IC or C1_DC */
+static void cache_disable(uint32_t cache_bit)
{
- ulong reg;
+ uint32_t reg;
- reg = read_p15_c1 ();
- cp_delay ();
- write_p15_c1 (reg & ~C1_IC);
+ reg = read_p15_c1();
+ cp_delay();
+ write_p15_c1(reg & ~cache_bit);
}
-int icache_status (void)
+void icache_enable(void)
{
- return (read_p15_c1 () & C1_IC) != 0;
+ cache_enable(C1_IC);
+}
+
+void icache_disable(void)
+{
+ cache_disable(C1_IC);
+}
+
+int icache_status(void)
+{
+ return (read_p15_c1() & C1_IC) != 0;
+}
+
+void dcache_enable(void)
+{
+ cache_enable(C1_DC);
+}
+
+void dcache_disable(void)
+{
+ cache_disable(C1_DC);
+}
+
+int dcache_status(void)
+{
+ return (read_p15_c1() & C1_DC) != 0;
}
phy.auto_negotiate = gen_auto_negotiate;
}
+ printf("Ethernet PHY: %s\n", phy.name);
+
return(1);
}
* Init onboard 16550 UART
*/
outb(0x80, UART1_BASE + UART_LCR); /* set DLAB bit */
- outb(bdiv & 0xff), UART1_BASE + UART_DLL); /* set divisor for 9600 baud */
- outb(bdiv >> 8), UART1_BASE + UART_DLM); /* set divisor for 9600 baud */
+ outb((bdiv & 0xff), UART1_BASE + UART_DLL); /* set divisor for 9600 baud */
+ outb((bdiv >> 8 ), UART1_BASE + UART_DLM); /* set divisor for 9600 baud */
outb(0x03, UART1_BASE + UART_LCR); /* line control 8 bits no parity */
outb(0x00, UART1_BASE + UART_FCR); /* disable FIFO */
outb(0x00, UART1_BASE + UART_MCR); /* no modem control DTR RTS */
p = npe_alloc_free;
npe_alloc_free += size;
} else {
- printf("%s: failed (count=%d, size=%d)!\n", count, size);
+ printf("npe_alloc: failed (count=%d, size=%d)!\n", count, size);
}
return p;
}
*/
int cpu_init_r(void)
{
-#ifdef CONFIG_MCFTMR
+#ifdef CONFIG_MCFRTC
volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
u32 oscillator = CFG_RTC_OSCILLATOR;
else is doing it! */
#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \
- defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \
- defined(CFG_CS0_WS)
+ defined(CFG_CS0_WIDTH) & defined(CFG_CS0_WS)
MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF;
#endif
#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \
- defined(CFG_CS1_WIDTH) & defined(CFG_CS1_RO) & \
- defined(CFG_CS1_WS)
+ defined(CFG_CS1_WIDTH) & defined(CFG_CS1_WS)
MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF;
#endif
#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \
- defined(CFG_CS2_WIDTH) & defined(CFG_CS2_RO) & \
- defined(CFG_CS2_WS)
+ defined(CFG_CS2_WIDTH) & defined(CFG_CS2_WS)
MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF;
#endif
#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \
- defined(CFG_CS3_WIDTH) & defined(CFG_CS3_RO) & \
- defined(CFG_CS3_WS)
+ defined(CFG_CS3_WIDTH) & defined(CFG_CS3_WS)
MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF;
/* Setup PLL */
pll->syncr = 0x01080000;
- while (!(pll->synsr & FMPLL_SYNSR_LOCK)
+ while (!(pll->synsr & FMPLL_SYNSR_LOCK))
;
pll->syncr = 0x01000000;
while (!(pll->synsr & FMPLL_SYNSR_LOCK))
else
PLATFORM_CPPFLAGS += -m5407 -fPIC
endif
+
+ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
+ifneq (,$(findstring GOT,$(shell $(LD) --help)))
+PLATFORM_LDFLAGS += --got=single
+endif
+endif
*/
int cpu_init_r(void)
{
-#ifdef CONFIG_MCFTMR
+#ifdef CONFIG_MCFRTC
volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
/* exception code */
.globl _fault
_fault:
- jmp _fault
+ bra _fault
.globl _exc_handler
_exc_handler:
else
PLATFORM_CPPFLAGS += -m5407 -fPIC
endif
+
+ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
+ifneq (,$(findstring GOT,$(shell $(LD) --help)))
+PLATFORM_LDFLAGS += --got=single
+endif
+endif
/* exception code */
.globl _fault
_fault:
- jmp _fault
+ bra _fault
.globl _exc_handler
_exc_handler:
for (i = 0; i < CFG_INTC_0_NUM; i++) {
if (act->handler != (interrupt_handler_t*) def_hdlr) {
- printf ("%02d %08lx %08lx %d\n", i,
+ printf ("%02d %08x %08x %d\n", i,
(int)act->handler, (int)act->arg, act->count);
}
act++;
#ifdef CONFIG_OF_LIBFDT
void ft_cpu_setup(void *blob, bd_t *bd)
{
- char * cpu_path = "/cpus/" OF_CPU;
- char * eth_path = "/" OF_SOC "/ethernet@2800";
+ char *cpu_path = "/cpus/" OF_CPU;
+ char *eth_path = "/" OF_SOC "/ethernet@2800";
+ char *eth_path_old = "/" OF_SOC_OLD "/ethernet@2800";
do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
/* this is so old kernels with old device trees will boot */
do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0);
+ do_fixup_by_path(blob, eth_path_old, "local-mac-address",
+ bd->bi_enetaddr, 6, 0);
+ do_fixup_by_path(blob, eth_path_old, "address", bd->bi_enetaddr, 6, 0);
}
#endif
/********************************************************************/
int mpc512x_fec_initialize (bd_t * bis)
{
-
- immap_t *im = (immap_t*) CFG_IMMR;
mpc512x_fec_priv *fec;
struct eth_device *dev;
int i;
char *tmp, *end, env_enetaddr[6];
- uint32 *reg;
void * bd;
fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
fec512x_miiphy_read, fec512x_miiphy_write);
#endif
- /*
- * Initialize I\O pins
- */
- reg = (uint32 *) &(im->io_ctrl.regs[PSC0_0_IDX]);
-
- for (i = 0; i < 15; i++)
- reg[i] = IOCTRL_MUX_FEC | 0x00000001;
-
- im->io_ctrl.regs[SPDIF_TXCLOCK_IDX] = IOCTRL_MUX_FEC | 0x00000001;
- im->io_ctrl.regs[SPDIF_TX_IDX] = IOCTRL_MUX_FEC | 0x00000001;
- im->io_ctrl.regs[SPDIF_RX_IDX] = IOCTRL_MUX_FEC | 0x00000001;
-
/* Clean up space FEC's MIB and FIFO RAM ...*/
memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400);
int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
printf("Clock configuration:\n");
- printf(" CPU: %4d MHz\n", gd->cpu_clk / 1000000);
+ printf(" CPU: %4ld MHz\n", gd->cpu_clk / 1000000);
printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
printf(" IPS Bus: %4d MHz\n", gd->ips_clk / 1000000);
printf(" PCI: %4d MHz\n", gd->pci_clk / 1000000);
(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
/* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+ printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n",
ddr->data_err_inject_hi, ddr->data_err_inject_lo);
printf("Memory Data Path Error Injection Mask ECC:\n");
(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
/* Capture data */
- printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+ printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address);
+ printf("Memory Data Path Read Capture High/Low: %08x %08x\n",
ddr->capture_data_hi, ddr->capture_data_lo);
printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
ddr->capture_ecc & CAPTURE_ECC_ECE);
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
void ft_cpu_setup(void *blob, bd_t *bd)
{
+ immap_t *immr = (immap_t *)CFG_IMMR;
+ int spridr = immr->sysconf.spridr;
+
+ /*
+ * delete crypto node if not on an E-processor
+ * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
+ * EA revisions got the SEC uprevved to 2.4 but since the default device
+ * tree contains SEC 2.0 properties we uprev them here.
+ */
+ if (!IS_E_PROCESSOR(spridr))
+ fdt_fixup_crypto_node(blob, 0);
+ else if (IS_E_PROCESSOR(spridr) &&
+ (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
+ SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
+ REVID_MAJOR(spridr) >= 2)
+ fdt_fixup_crypto_node(blob, 0x0204);
+
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
fdt_fixup_ethernet(blob, bd);
#ifdef CFG_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
+ "clock-frequency", CFG_NS16550_CLK, 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#endif
printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000);
- printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000);
+ printf(" DDR: %4ld MHz\n", gd->mem_clk / 1000000);
#if defined(CONFIG_MPC8360)
printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000);
#endif
if (cpu) {
puts(cpu->name);
- if (svr & 0x80000)
+ if (IS_E_PROCESSOR(svr))
puts("E");
} else {
puts("Unknown");
volatile uint cache_ctl;
uint svr, ver;
uint l2srbar;
+ u32 l2siz_field;
svr = get_svr();
ver = SVR_SOC_VER(svr);
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
+ l2siz_field = (cache_ctl >> 28) & 0x3;
- switch (cache_ctl & 0x30000000) {
- case 0x20000000:
- if (ver == SVR_8548 || ver == SVR_8548_E ||
- ver == SVR_8544 || ver == SVR_8568_E) {
- puts ("512 KB ");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
+ switch (l2siz_field) {
+ case 0x0:
+ printf(" unknown size (0x%08x)\n", cache_ctl);
+ return -1;
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("128 KB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ cache_ctl = 0xc4000000;
} else {
+ puts("256 KB ");
+ cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+ }
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
+ } else {
+ puts ("512 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
}
break;
- case 0x10000000:
- puts("256 KB ");
- if (ver == SVR_8544 || ver == SVR_8544_E) {
- cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
- }
+ case 0x3:
+ puts("1024 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
break;
- case 0x30000000:
- case 0x00000000:
- default:
- printf(" unknown size (0x%08x)\n", cache_ctl);
- return -1;
}
if (l2cache->l2ctl & 0x80000000) {
#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
+
#ifdef CONFIG_MP
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
void ft_cpu_setup(void *blob, bd_t *bd)
{
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(get_svr()))
+ fdt_fixup_crypto_node(blob, 0);
+
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
fdt_fixup_ethernet(blob, bd);
#ifdef CFG_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
+ "clock-frequency", CFG_NS16550_CLK, 1);
#endif
#ifdef CONFIG_CPM2
if (nr == id) {
table = (u32 *)get_spin_addr();
- printf("table base @ 0x%08x\n", table);
+ printf("table base @ 0x%p\n", table);
} else {
table = (u32 *)get_spin_addr() + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
printf("\n");
- printf("table @ 0x%08x:\n", table);
+ printf("table @ 0x%p\n", table);
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+ /* Align the mapping to 16MB */
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l
- lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
mtspr MAS0,r6
mtspr MAS1,r7
void
watchdog_reset(void)
{
+#if defined(CONFIG_MPC8610)
+ /*
+ * This actually feed the hard enabled watchdog.
+ */
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_wdt_t *wdt = &immap->im_wdt;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ u32 tmp = gur->pordevsr;
+
+ if (tmp & 0x4000) {
+ wdt->swsrr = 0x556c;
+ wdt->swsrr = 0xaa39;
+ }
+#endif
}
#endif /* CONFIG_WATCHDOG */
#ifdef CFG_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
+ "clock-frequency", CFG_NS16550_CLK, 1);
#endif
}
#include <command.h>
#include <asm/processor.h>
#include <ppc_asm.tmpl>
+#include <watchdog.h>
unsigned long decrementer_count; /* count value for 1e6/HZ microseconds */
unsigned long timestamp;
if (debugger_exception_handler && (*debugger_exception_handler) (regs))
return;
#endif
- printf("UnknownException regs@%x\n", regs);
+ printf("UnknownException regs@%lx\n", (ulong)regs);
printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
regs->nip, regs->msr, regs->trap);
_exception(0, regs);
puts ("[VIDEO ENCODER] Configuring the encoder...\n");
- printf ("Sending %d bytes (@ %08lX) to I2C 0x%X:\n ",
+ printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n ",
sizeof(video_encoder_data),
(ulong)video_encoder_data,
- VIDEO_I2C_ADDR);
+ (ulong)VIDEO_I2C_ADDR);
for (i=0; i<sizeof(video_encoder_data); ++i) {
printf(" %02X", video_encoder_data[i]);
}
int sdram0_pmit=0x07c00000;
#ifndef CONFIG_405EP /* not on PPC405EP */
- int sdram0_besr0=-1;
- int sdram0_besr1=-1;
- int sdram0_eccesr=-1;
+ int sdram0_besr0 = -1;
+ int sdram0_besr1 = -1;
+ int sdram0_eccesr = -1;
#endif
int sdram0_ecccfg;
if (dimm_type == SDRAM_DDR2) {
codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
if ((total_dimm == 1) && (firstSlot == TRUE)) {
- if (total_rank == 1) {
+ if (total_rank == 1) { /* PUUU */
codt |= CALC_ODT_R(0);
modt0 = CALC_ODT_W(0);
modt1 = 0x00000000;
modt2 = 0x00000000;
modt3 = 0x00000000;
}
- if (total_rank == 2) {
+ if (total_rank == 2) { /* PPUU */
codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
- modt0 = CALC_ODT_W(0);
- modt1 = CALC_ODT_W(0);
+ modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
+ modt1 = 0x00000000;
modt2 = 0x00000000;
modt3 = 0x00000000;
}
} else if ((total_dimm == 1) && (firstSlot != TRUE)) {
- if (total_rank == 1) {
+ if (total_rank == 1) { /* UUPU */
codt |= CALC_ODT_R(2);
modt0 = 0x00000000;
modt1 = 0x00000000;
modt2 = CALC_ODT_W(2);
modt3 = 0x00000000;
}
- if (total_rank == 2) {
+ if (total_rank == 2) { /* UUPP */
codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
modt0 = 0x00000000;
modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2);
- modt3 = CALC_ODT_W(2);
+ modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
+ modt3 = 0x00000000;
}
}
if (total_dimm == 2) {
- if (total_rank == 2) {
+ if (total_rank == 2) { /* PUPU */
codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
modt0 = CALC_ODT_RW(2);
modt1 = 0x00000000;
modt2 = CALC_ODT_RW(0);
modt3 = 0x00000000;
}
- if (total_rank == 4) {
+ if (total_rank == 4) { /* PPPP */
codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = CALC_ODT_RW(2);
+ modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0);
+ modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
modt3 = 0x00000000;
}
}
#define DEBUG
#endif
-#include <asm/processor.h>
-#include <asm-ppc/io.h>
-#include <ppc4xx.h>
#include <common.h>
#include <pci.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm-ppc/io.h>
#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
val[1] = 0; /* always 0 */
val[2] = gd->bd->bi_flashstart;
val[3] = gd->bd->bi_flashsize;
- rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
- val, sizeof(val), 1);
+ if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) {
+ rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+ val, sizeof(val), 1);
+ } else {
+ /*
+ * Some 405 PPC's have EBC as direct PLB child in the dts
+ */
+ rc = fdt_find_and_setprop(blob, "/plb/ebc", "ranges",
+ val, sizeof(val), 1);
+ }
if (rc)
printf("Unable to update property NOR mapping, err=%s\n",
fdt_strerror(rc));
mmc_dev.removable = 0;
mmc_dev.block_read = mmc_bread;
- printf("Detected: %u blocks of %u bytes (%uMB) ", mmc_dev.lba,
- mmc_dev.blksz, mmc_dev.lba * mmc_dev.blksz / (1024 * 1024));
+ printf("Detected: %lu blocks of %lu bytes (%luMB) ",
+ mmc_dev.lba,
+ mmc_dev.blksz,
+ mmc_dev.lba * mmc_dev.blksz / (1024 * 1024));
}
int
--- /dev/null
+Matrix Vision mvBlueCOUGAR-P (mvBC-P)
+-------------------------------------
+
+1. Board Description
+
+ The mvBC-P is a 70x40x40mm multi board gigabit ethernet network camera
+ with main focus on GigEVision protocol in combination with local image
+ preprocessing.
+
+ Power Supply is either VDC 48V or Pover over Ethernet (PoE).
+
+2 System Components
+
+2.1 CPU
+ Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
+ 64MB SDRAM @ 133MHz.
+ 8 MByte Nor Flash on local bus.
+ 1 serial ports. Console running on ttyS0 @ 115200 8N1.
+
+2.2 PCI
+ PCI clock fixed at 66MHz. Arbitration inside FPGA.
+ Intel GD82541ER network MAC/PHY and FPGA connected.
+
+2.3 FPGA
+ Altera Cyclone-II EP2C8 with PCI DMA engine.
+ Connects to Matrix Vision specific CCD/CMOS sensor interface.
+ Utilizes 64MB Nand Flash.
+
+2.3.1 I/O @ FPGA
+ 2 Outputs : photo coupler
+ 2 Inputs : photo coupler
+
+2.4 I2C
+ LM75 @ 0x90 for temperature monitoring.
+ EEPROM @ 0xA0 for vendor specifics.
+ image sensor interface (slave adresses depend on sensor)
+
+3 Flash layout.
+
+ reset vector is 0x00000100, i.e. "LOWBOOT".
+
+ FF800000 u-boot
+ FF840000 u-boot script image
+ FF850000 redundant u-boot script image
+ FF860000 FPGA raw bit file
+ FF8A0000 tbd.
+ FF900000 root FS
+ FFC00000 kernel
+ FFFC0000 device tree blob
+ FFFD0000 redundant device tree blob
+ FFFE0000 environment
+ FFFF0000 redundant environment
+
+ mtd partitions are propagated to linux kernel via device tree blob.
+
+4 Booting
+
+ On startup the bootscript @ FF840000 is executed. This script can be
+ exchanged easily. Default boot mode is "boot from flash", i.e. system
+ works stand-alone.
+
+ This behaviour depends on some environment variables :
+
+ "netboot" : yes ->try dhcp/bootp and boot from network.
+ A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
+ DHCP server configuration, e.g. to provide different images to
+ different devices.
+
+ During netboot the system tries to get 3 image files:
+ 1. Kernel - name + data is given during BOOTP.
+ 2. Initrd - name is stored in "initrd_name"
+ 3. device tree blob - name is stored in "dtb_name"
+ Fallback files are the flash versions.
int rc;
if (tag > SATA_HC_MAX_CMD || tag < 0) {
- printf("tag is out of range, tag=\n\r", tag);
+ printf("tag is out of range, tag=%d\n\r", tag);
return -1;
}
/* Total sectors of device */
n_sectors = ata_id_n_sectors(id);
- printf("Capablity: %d sectors\n\r", n_sectors);
+ printf("Capablity: %lld sectors\n\r", n_sectors);
printf ("id[49]: capabilities = 0x%04x\n"
"id[53]: field valid = 0x%04x\n"
pccb->msgout[0]=SCSI_IDENTIFY;
transbytes=pccb->trans_bytes;
tmpptr=pccb->pdata;
- pccb->pdata=&pccb->sense_buf[0];
+ pccb->pdata = &pccb->sense_buf[0];
datalen=pccb->datalen;
pccb->datalen=14;
tmpstat=pccb->status;
LIB = $(obj)libhwmon.a
-COBJS-y += adm1021.o
-COBJS-y += ds1621.o
-COBJS-y += ds1722.o
-COBJS-y += ds1775.o
+COBJS-$(CONFIG_DTT_ADM1021) += adm1021.o
+COBJS-$(CONFIG_DTT_DS1621) += ds1621.o
+COBJS-$(CONFIG_DTT_DS1722) += ds1722.o
+COBJS-$(CONFIG_DTT_DS1775) += ds1775.o
COBJS-$(CONFIG_DTT_LM73) += lm73.o
-COBJS-y += lm75.o
-COBJS-y += lm81.o
+COBJS-$(CONFIG_DTT_LM75) += lm75.o
+COBJS-$(CONFIG_DTT_LM81) += lm81.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
#include <common.h>
-#ifdef CONFIG_DTT_ADM1021
-
#include <i2c.h>
#include <dtt.h>
+#define DTT_READ_LOC_VALUE 0x00
+#define DTT_READ_REM_VALUE 0x01
+#define DTT_READ_STATUS 0x02
+#define DTT_READ_CONFIG 0x03
+#define DTT_READ_CONVRATE 0x04
+#define DTT_READ_LOC_HIGHLIM 0x05
+#define DTT_READ_LOC_LOWLIM 0x06
+#define DTT_READ_REM_HIGHLIM 0x07
+#define DTT_READ_REM_LOWLIM 0x08
+#define DTT_READ_DEVID 0xfe
+
+#define DTT_WRITE_CONFIG 0x09
+#define DTT_WRITE_CONVRATE 0x0a
+#define DTT_WRITE_LOC_HIGHLIM 0x0b
+#define DTT_WRITE_LOC_LOWLIM 0x0c
+#define DTT_WRITE_REM_HIGHLIM 0x0d
+#define DTT_WRITE_REM_LOWLIM 0x0e
+#define DTT_WRITE_ONESHOT 0x0f
+
+#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */
+#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */
+#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */
+#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */
+#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */
+#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */
+
+#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */
+#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */
+
+#define DTT_ADM1021_DEVID 0x41
+
typedef
struct {
uint i2c_addr:7; /* 7bit i2c chip address */
return (int) val;
} /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_ADM1021 */
#include <common.h>
-#ifdef CONFIG_DTT_DS1621
#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
(CFG_EEPROM_PAGE_WRITE_BITS < 1)
# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621"
* Device code
*/
#define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */
+#define DTT_READ_TEMP 0xAA
+#define DTT_READ_COUNTER 0xA8
+#define DTT_READ_SLOPE 0xA9
+#define DTT_WRITE_START_CONV 0xEE
+#define DTT_WRITE_STOP_CONV 0x22
+#define DTT_TEMP_HIGH 0xA1
+#define DTT_TEMP_LOW 0xA2
+#define DTT_CONFIG 0xAC
int dtt_read(int sensor, int reg)
{
return (dtt_read(sensor, DTT_READ_TEMP) / 256);
} /* dtt_get_temp() */
-
-
-#endif /* CONFIG_DTT_DS1621 */
#include <common.h>
-
-#ifdef CONFIG_DS1722
-
#include <ssi.h>
static void ds1722_select(int dev)
printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff);
return 0;
}
-
-#endif
#include <common.h>
-#ifdef CONFIG_DTT_DS1775
#include <i2c.h>
#include <dtt.h>
#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_OS 0x3
int dtt_read(int sensor, int reg)
{
{
return (dtt_read(sensor, DTT_READ_TEMP) / 256);
}
-
-
-#endif /* CONFIG_DTT_DS1775 */
* Device code
*/
#define DTT_I2C_DEV_CODE 0x48 /* National Semi's LM73 device */
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HIGH 0x2
+#define DTT_TEMP_LOW 0x3
+#define DTT_CONTROL 0x4
+#define DTT_ID 0x7
int dtt_read(int const sensor, int const reg)
{
#include <common.h>
-#ifdef CONFIG_DTT_LM75
#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
(CFG_EEPROM_PAGE_WRITE_BITS < 1)
# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM75"
#include <i2c.h>
#include <dtt.h>
-
/*
* Device code
*/
#define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_SET 0x3
int dtt_read(int sensor, int reg)
{
}
return (int)((int16_t) ret / 256);
} /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_LM75 */
#include <common.h>
-#ifdef CONFIG_DTT_LM81
#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
(CFG_EEPROM_PAGE_WRITE_BITS < 1)
# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81"
* Device code
*/
#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */
+#define DTT_READ_TEMP 0x27
+#define DTT_CONFIG_TEMP 0x4b
+#define DTT_TEMP_MAX 0x39
+#define DTT_TEMP_HYST 0x3a
+#define DTT_CONFIG 0x40
int dtt_read(int sensor, int reg)
{
return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10;
} /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_LM81 */
int val;
unsigned char status;
- val=-1;
+ val = -1;
status = kbd_read_status();
if (status & KBD_STAT_OBF) {
val = kbd_read_input();
/*-----------------------------------------------------------------------
* make a proper sized command based on the port and chip widths
*/
-static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf)
+static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
{
int i;
int cword_offset;
int cp_offset;
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+ u32 cmd_le = cpu_to_le32(cmd);
+#endif
uchar val;
uchar *cp = (uchar *) cmdbuf;
cword_offset = (info->portwidth-i)%info->chipwidth;
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
cp_offset = info->portwidth - i;
- val = *((uchar*)&cmd + cword_offset);
+ val = *((uchar*)&cmd_le + cword_offset);
#else
cp_offset = i - 1;
- val = *((uchar*)&cmd + sizeof(ulong) - cword_offset - 1);
+ val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1);
#endif
- cp[cp_offset] = (cword_offset >= sizeof(ulong)) ? 0x00 : val;
+ cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val;
}
}
* Write a proper sized command to the correct address
*/
static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
- uint offset, ulong cmd)
+ uint offset, u32 cmd)
{
void *addr;
&dataflash_info[i].Desc);
switch (dfcode) {
+ case AT45DB021:
+ dataflash_info[i].Device.pages_number = 1024;
+ dataflash_info[i].Device.pages_size = 263;
+ dataflash_info[i].Device.page_offset = 9;
+ dataflash_info[i].Device.byte_mask = 0x300;
+ dataflash_info[i].Device.cs = cs[i].cs;
+ dataflash_info[i].Desc.DataFlash_state = IDLE;
+ dataflash_info[i].logical_address = cs[i].addr;
+ dataflash_info[i].id = dfcode;
+ found[i] += dfcode;;
+ break;
case AT45DB161:
dataflash_info[i].Device.pages_number = 4096;
dataflash_info[i].Device.pages_size = 528;
if((env & FLAG_SETENV) == FLAG_SETENV) {
start =
dataflash_info[i].Device.area_list[j].start;
- sprintf((char*) s,"%X",start);
+ sprintf((char*) s,"%lX",start);
setenv((char*) area_list[part].label,(char*) s);
}
part++;
if (dataflash_info[i].id != 0) {
printf("DataFlash:");
switch (dataflash_info[i].id) {
+ case AT45DB021:
+ printf("AT45DB021\n");
+ break;
case AT45DB161:
printf("AT45DB161\n");
break;
val = reg_read(BYTE_TEST);
if (val != 0x87654321) {
- printf(DRIVERNAME ": Invalid chip endian 0x%08x\n", val);
+ printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
goto err_out;
}
if (chip_ids[i].id == val) break;
}
if (!chip_ids[i].id) {
- printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
+ printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
goto err_out;
}
status = le32_to_cpu(tx_descr->config_status);
if ((status & DMA_DESCR_TX_OK) == 0) {
#ifdef TX_PRINT_ERRORS
- printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status,
+ printf ("TX packet error: 0x%08lx\n %s%s%s%s\n", status,
status & DMA_DESCR_TX_OK ? "tx error, " : "",
status & DMA_DESCR_TX_RETRY_LIMIT ?
"retry limit reached, " : "",
status = le32_to_cpu(rx_descr->config_status);
if (status & DMA_DESCR_RX_BAD_FRAME) {
#ifdef RX_PRINT_ERRORS
- printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n",
+ printf ("RX packet error: 0x%08lx\n %s%s%s%s%s%s\n",
status,
status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
: "",
/* error summary bit check */
if (rdes0 & 0x8000) {
/* This is a error packet */
- printf("Eroor: rdes0: %lx\n", rdes0);
+ printf("Error: rdes0: %x\n", rdes0);
}
if (!(rdes0 & 0x8000) ||
pci_dev_t dev = PCI_BDF(busno,0,0);
/* Initialize ATMU registers based on hose regions and flags */
- volatile pot_t *po=&pci->pot[1]; /* skip 0 */
- volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */
+ volatile pot_t *po = &pci->pot[1]; /* skip 0 */
+ volatile pit_t *pi = &pci->pit[0]; /* ranges from: 3 to 1 */
#ifdef DEBUG
int neg_link_w;
hose->last_busno = pci_hose_scan(hose);
return 0;
}
+
+int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ return 0;
+}
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ return 1;
+}
+#endif /* CONFIG_PCI_SCAN_SHOW */
rel = -1;
}
- DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1);
+ DEBUGR ("Get RTC s since 1.1.1970: %ld\n", time1);
to_tm(time1, tm); /* To Gregorian Date */
tmp->tm_mday, tmp->tm_hour,
tmp->tm_min, tmp->tm_sec);
- DEBUGR ("Set RTC s since 1.1.1970: %d (0x%02x)\n", time, time);
+ DEBUGR ("Set RTC s since 1.1.1970: %ld (0x%02lx)\n", time, time);
/* write to RTC_TOD_CNT_BYTEn_ADDR */
for (i = 0; i <= 3; i++) {
uart->umr = UART_UMR_SB_STOP_BITS_1;
/* Setting up BaudRate */
- counter = (u32) (gd->bus_clk / (gd->baudrate));
- counter >>= 5;
+ counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
+ counter = counter / gd->baudrate;
/* write to CTUR: divide counter upper byte */
uart->ubg1 = (u8) ((counter & 0xff00) >> 8);
/* Compute divisor value. Normally, we should simply return:
* CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
- * but we need to round that value by adding 0.5 or 8/16.
+ * but we need to round that value by adding 0.5.
* Rounding is especially important at high baud rates.
*/
- return (((16 * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate) + 8) / 16;
+ return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+ (MODE_X_DIV * gd->baudrate);
}
#if !defined(CONFIG_SERIAL_MULTI)
/*
- * (C) Copyright 2004 Atmark Techno, Inc.
+ * (C) Copyright 2008 Michal Simek <monstr@monstr.eu>
+ * Clean driver and add xilinx constant from header file
*
+ * (C) Copyright 2004 Atmark Techno, Inc.
* Yasushi SHOJI <yashi@atmark-techno.com>
*
* See file CREDITS for list of people who contributed to this
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
*/
#include <config.h>
+#include <asm/io.h>
#ifdef CONFIG_XILINX_UARTLITE
-#include <asm/serial_xuartlite.h>
+#define RX_FIFO_OFFSET 0 /* receive FIFO, read only */
+#define TX_FIFO_OFFSET 4 /* transmit FIFO, write only */
+#define STATUS_REG_OFFSET 8 /* status register, read only */
-/* FIXME: we should convert these to in32 and out32 */
-#define IO_WORD(offset) (*(volatile unsigned long *)(offset))
-#define IO_SERIAL(offset) IO_WORD(CONFIG_SERIAL_BASE + (offset))
+#define SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */
+#define SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */
+#define SR_RX_FIFO_FULL 0x02 /* receive FIFO full */
-#define IO_SERIAL_RX_FIFO IO_SERIAL(XUL_RX_FIFO_OFFSET)
-#define IO_SERIAL_TX_FIFO IO_SERIAL(XUL_TX_FIFO_OFFSET)
-#define IO_SERIAL_STATUS IO_SERIAL(XUL_STATUS_REG_OFFSET)
-#define IO_SERIAL_CONTROL IO_SERIAL(XUL_CONTROL_REG_OFFSET)
+#define UARTLITE_STATUS (CONFIG_SERIAL_BASE + STATUS_REG_OFFSET)
+#define UARTLITE_TX_FIFO (CONFIG_SERIAL_BASE + TX_FIFO_OFFSET)
+#define UARTLITE_RX_FIFO (CONFIG_SERIAL_BASE + RX_FIFO_OFFSET)
int serial_init(void)
{
void serial_putc(const char c)
{
- if (c == '\n') serial_putc('\r');
- while (IO_SERIAL_STATUS & XUL_SR_TX_FIFO_FULL);
- IO_SERIAL_TX_FIFO = (unsigned char) (c & 0xff);
+ if (c == '\n')
+ serial_putc('\r');
+ while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL);
+ out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
}
void serial_puts(const char * s)
int serial_getc(void)
{
- while (!(IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA));
- return IO_SERIAL_RX_FIFO & 0xff;
+ while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
+ return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff;
}
int serial_tstc(void)
{
- return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA);
+ return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
}
#endif /* CONFIG_MICROBLZE */
}
snlen = strlen(sn);
if (snlen > sizeof(serial_number) - 1) {
- printf ("Warning: serial number %s is too long (%d > %d)\n",
- sn, snlen, sizeof(serial_number) - 1);
+ printf ("Warning: serial number %s is too long (%d > %lu)\n",
+ sn, snlen, (ulong)(sizeof(serial_number) - 1));
snlen = sizeof(serial_number) - 1;
}
memcpy (serial_number, sn, snlen);
*
* NOTE: endpoint_address MUST contain a direction flag.
*/
-struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint)
+struct urb *usbd_alloc_urb (struct usb_device_instance *device,
+ struct usb_endpoint_instance *endpoint)
{
struct urb *urb;
- if( !(urb = (struct urb*)malloc(sizeof(struct urb))) ) {
- usberr(" F A T A L: malloc(%u) FAILED!!!!", sizeof(struct urb));
- return NULL;
+ if (!(urb = (struct urb *) malloc (sizeof (struct urb)))) {
+ usberr (" F A T A L: malloc(%u) FAILED!!!!",
+ sizeof (struct urb));
+ return NULL;
}
/* Fill in known fields */
- memset(urb, 0, sizeof(struct urb));
+ memset (urb, 0, sizeof (struct urb));
urb->endpoint = endpoint;
urb->device = device;
- urb->buffer = (u8*)urb->buffer_data;
- urb->buffer_length = sizeof(urb->buffer_data);
+ urb->buffer = (u8 *) urb->buffer_data;
+ urb->buffer_length = sizeof (urb->buffer_data);
urb_link_init (&urb->link);
DE_WR_FIFO (0x09410000);
DE_WR_FIFO (0x00000000);
DE_WR_FIFO (pGD->winSizeY<<16 | pGD->winSizeX);
+ /* sync with SW access to framebuffer */
+ de_wait ();
}
#if defined(CONFIG_VIDEO_CORALP)
p[2] = pattern;
printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx",
- (unsigned long)step, addr, val, pattern);
+ step, (unsigned long)addr, val, pattern);
}
static void signal_init(void)
} else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) {
if (node->totlen != sizeof(struct jffs2_unknown_node))
printf("OOPS Cleanmarker has bad size "
- "%d != %d\n", node->totlen,
+ "%d != %zu\n",
+ node->totlen,
sizeof(struct jffs2_unknown_node));
} else if (node->nodetype == JFFS2_NODETYPE_PADDING) {
if (node->totlen < sizeof(struct jffs2_unknown_node))
printf("OOPS Padding has bad size "
- "%d < %d\n", node->totlen,
+ "%d < %zu\n",
+ node->totlen,
sizeof(struct jffs2_unknown_node));
} else {
- printf("Unknown node type: %x len %d "
- "offset 0x%x\n", node->nodetype,
+ printf("Unknown node type: %x len %d offset 0x%x\n",
+ node->nodetype,
node->totlen, offset);
}
offset += ((node->totlen + 3) & ~3);
} else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) {
if (node->totlen != sizeof(struct jffs2_unknown_node))
printf("OOPS Cleanmarker has bad size "
- "%d != %d\n", node->totlen,
+ "%d != %zu\n",
+ node->totlen,
sizeof(struct jffs2_unknown_node));
} else if (node->nodetype == JFFS2_NODETYPE_PADDING) {
if (node->totlen < sizeof(struct jffs2_unknown_node))
printf("OOPS Padding has bad size "
- "%d < %d\n", node->totlen,
+ "%d < %zu\n",
+ node->totlen,
sizeof(struct jffs2_unknown_node));
} else {
- printf("Unknown node type: %x len %d "
- "offset 0x%x\n", node->nodetype,
+ printf("Unknown node type: %x len %d offset 0x%x\n",
+ node->nodetype,
node->totlen, offset);
}
offset += ((node->totlen + 3) & ~3);
/****************************************************************************/
/* DMA Timer module registers */
typedef struct dtimer_ctrl {
-#if defined(CONFIG_M5249) || defined(CONFIG_M5253)
+#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5272)
u16 tmr; /* 0x00 Mode register */
u16 res1; /* 0x02 */
u16 trr; /* 0x04 Reference register */
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2003 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.h
-*
-* This file contains basic types for Xilinx software IP. These types do not
-* follow the standard naming convention with respect to using the component
-* name in front of each name because they are considered to be primitives.
-*
-* @note
-*
-* This file contains items which are architecture dependent.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rmm 12/14/01 First release
-* rmm 05/09/03 Added "xassert always" macros to rid ourselves of diab
-* compiler warnings
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XBASIC_TYPES_H /* prevent circular inclusions */
-#define XBASIC_TYPES_H /* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-/************************** Constant Definitions *****************************/
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-/** Null */
-
-#define XCOMPONENT_IS_READY 0x11111111 /* component has been initialized */
-#define XCOMPONENT_IS_STARTED 0x22222222 /* component has been started */
-
-/* the following constants and declarations are for unit test purposes and are
- * designed to be used in test applications.
- */
-#define XTEST_PASSED 0
-#define XTEST_FAILED 1
-
-#define XASSERT_NONE 0
-#define XASSERT_OCCURRED 1
-
-extern unsigned int XAssertStatus;
-extern void XAssert(char *, int);
-
-/**************************** Type Definitions *******************************/
-
-/** @name Primitive types
- * These primitive types are created for transportability.
- * They are dependent upon the target architecture.
- * @{
- */
-#include <linux/types.h>
-
-typedef struct {
- u32 Upper;
- u32 Lower;
-} Xuint64;
-
-/* Xilinx's unsigned integer types */
-typedef u32 Xuint32;
-typedef u16 Xuint16;
-typedef u8 Xuint8;
-
-/* and signed integer types */
-typedef s32 Xint32;
-typedef s16 Xint16;
-typedef s8 Xint8;
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-typedef unsigned long Xboolean;
-#define XNULL NULL
-
-#define XTRUE 1
-#define XFALSE 0
-
-/*@}*/
-
-/**
- * This data type defines an interrupt handler for a device.
- * The argument points to the instance of the component
- */
-typedef void (*XInterruptHandler) (void *InstancePtr);
-
-/**
- * This data type defines a callback to be invoked when an
- * assert occurs. The callback is invoked only when asserts are enabled
- */
-typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber);
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-* Return the most significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The upper 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_MSW(x) ((x).Upper)
-
-/*****************************************************************************/
-/**
-* Return the least significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The lower 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_LSW(x) ((x).Lower)
-
-#ifndef NDEBUG
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do not return anything
-* (void). This in conjunction with the XWaitInAssert boolean can be used to
-* accomodate tests so that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-* the assert occurs.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID(expression) \
-{ \
- if (expression) { \
- XAssertStatus = XASSERT_NONE; \
- } else { \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return; \
- } \
-}
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do return a value. This in
-* conjunction with the XWaitInAssert boolean can be used to accomodate tests so
-* that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-* the assert occurs.
-*
-* @return
-*
-* Returns 0 unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID(expression) \
-{ \
- if (expression) { \
- XAssertStatus = XASSERT_NONE; \
- } else { \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return 0; \
- } \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do not
-* return anything (void). Use for instances where an assert should always
-* occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID_ALWAYS() \
-{ \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return; \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do return
-* a value. Use for instances where an assert should always occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID_ALWAYS() \
-{ \
- XAssert(__FILE__, __LINE__); \
- XAssertStatus = XASSERT_OCCURRED; \
- return 0; \
-}
-
-#else
-
-#define XASSERT_VOID(expression)
-#define XASSERT_VOID_ALWAYS()
-#define XASSERT_NONVOID(expression)
-#define XASSERT_NONVOID_ALWAYS()
-#endif
-
-/************************** Function Prototypes ******************************/
-
-void XAssertSetCallback(XAssertCallback Routine);
-
-#endif /* end of protection macro */
+++ /dev/null
-/*
- * xio.h
- *
- * Defines XIo functions for Xilinx OCP in terms of Linux primitives
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under the terms
- * of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifndef XIO_H
-#define XIO_H
-
-#include "xbasic_types.h"
-#include <asm/io.h>
-
-typedef u32 XIo_Address;
-
-extern inline u8
-XIo_In8(XIo_Address InAddress)
-{
- return (u8) in_8((volatile unsigned char *) InAddress);
-}
-extern inline u16
-XIo_In16(XIo_Address InAddress)
-{
- return (u16) in_be16((volatile unsigned short *) InAddress);
-}
-extern inline u32
-XIo_In32(XIo_Address InAddress)
-{
- return (u32) in_be32((volatile unsigned *) InAddress);
-}
-extern inline void
-XIo_Out8(XIo_Address OutAddress, u8 Value)
-{
- out_8((volatile unsigned char *) OutAddress, Value);
-}
-extern inline void
-XIo_Out16(XIo_Address OutAddress, u16 Value)
-{
- out_be16((volatile unsigned short *) OutAddress, Value);
-}
-extern inline void
-XIo_Out32(XIo_Address OutAddress, u32 Value)
-{
- out_be32((volatile unsigned *) OutAddress, Value);
-}
-
-#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
-#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
-#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
-#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
-
-#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
-#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
-#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
-#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
-
-#endif /* XIO_H */
+++ /dev/null
-/*****************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xuartlite_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device. High-level driver functions
-* are defined in xuartlite.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 04/25/02 First release
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XUARTLITE_L_H /* prevent circular inclusions */
-#define XUARTLITE_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions ****************************/
-
-/* UART Lite register offsets */
-
-#define XUL_RX_FIFO_OFFSET 0 /* receive FIFO, read only */
-#define XUL_TX_FIFO_OFFSET 4 /* transmit FIFO, write only */
-#define XUL_STATUS_REG_OFFSET 8 /* status register, read only */
-#define XUL_CONTROL_REG_OFFSET 12 /* control register, write only */
-
-/* control register bit positions */
-
-#define XUL_CR_ENABLE_INTR 0x10 /* enable interrupt */
-#define XUL_CR_FIFO_RX_RESET 0x02 /* reset receive FIFO */
-#define XUL_CR_FIFO_TX_RESET 0x01 /* reset transmit FIFO */
-
-/* status register bit positions */
-
-#define XUL_SR_PARITY_ERROR 0x80
-#define XUL_SR_FRAMING_ERROR 0x40
-#define XUL_SR_OVERRUN_ERROR 0x20
-#define XUL_SR_INTR_ENABLED 0x10 /* interrupt enabled */
-#define XUL_SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */
-#define XUL_SR_TX_FIFO_EMPTY 0x04 /* transmit FIFO empty */
-#define XUL_SR_RX_FIFO_FULL 0x02 /* receive FIFO full */
-#define XUL_SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */
-
-/* the following constant specifies the size of the FIFOs, the size of the
- * FIFOs includes the transmitter and receiver such that it is the total number
- * of bytes that the UART can buffer
- */
-#define XUL_FIFO_SIZE 16
-
-/* Stop bits are fixed at 1. Baud, parity, and data bits are fixed on a
- * per instance basis
- */
-#define XUL_STOP_BITS 1
-
-/* Parity definitions
- */
-#define XUL_PARITY_NONE 0
-#define XUL_PARITY_ODD 1
-#define XUL_PARITY_EVEN 2
-
-/**************************** Type Definitions ******************************/
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-/*****************************************************************************
-*
-* Low-level driver macros and functions. The list below provides signatures
-* to help the user use the macros.
-*
-* void XUartLite_mSetControlReg(u32 BaseAddress, u32 Mask)
-* u32 XUartLite_mGetControlReg(u32 BaseAddress)
-* u32 XUartLite_mGetStatusReg(u32 BaseAddress)
-*
-* Xboolean XUartLite_mIsReceiveEmpty(u32 BaseAddress)
-* Xboolean XUartLite_mIsTransmitFull(u32 BaseAddress)
-* Xboolean XUartLite_mIsIntrEnabled(u32 BaseAddress)
-*
-* void XUartLite_mEnableIntr(u32 BaseAddress)
-* void XUartLite_mDisableIntr(u32 BaseAddress)
-*
-* void XUartLite_SendByte(u32 BaseAddress, u8 Data);
-* u8 XUartLite_RecvByte(u32 BaseAddress);
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*
-* Set the contents of the control register. Use the XUL_CR_* constants defined
-* above to create the bit-mask to be written to the register.
-*
-* @param BaseAddress is the base address of the device
-* @param Mask is the 32-bit value to write to the control register
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mSetControlReg(BaseAddress, Mask) \
- XIo_Out32((BaseAddress) + XUL_CONTROL_REG_OFFSET, (Mask))
-
-
-/****************************************************************************/
-/**
-*
-* Get the contents of the control register. Use the XUL_CR_* constants defined
-* above to interpret the bit-mask returned.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return A 32-bit value representing the contents of the control register.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mGetControlReg(BaseAddress) \
- XIo_In32((BaseAddress) + XUL_CONTROL_REG_OFFSET)
-
-
-/****************************************************************************/
-/**
-*
-* Get the contents of the status register. Use the XUL_SR_* constants defined
-* above to interpret the bit-mask returned.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return A 32-bit value representing the contents of the status register.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mGetStatusReg(BaseAddress) \
- XIo_In32((BaseAddress) + XUL_STATUS_REG_OFFSET)
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the receiver has data.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return XTRUE if the receiver is empty, XFALSE if there is data present.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mIsReceiveEmpty(BaseAddress) \
- (!(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_RX_FIFO_VALID_DATA))
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the transmitter is full.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return XTRUE if the transmitter is full, XFALSE otherwise.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mIsTransmitFull(BaseAddress) \
- (XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_TX_FIFO_FULL)
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the interrupt is enabled.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return XTRUE if the interrupt is enabled, XFALSE otherwise.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mIsIntrEnabled(BaseAddress) \
- (XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_INTR_ENABLED)
-
-
-/****************************************************************************/
-/**
-*
-* Enable the device interrupt. Preserve the contents of the control register.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mEnableIntr(BaseAddress) \
- XUartLite_mSetControlReg((BaseAddress), \
- XUartLite_mGetControlReg((BaseAddress)) | XUL_CR_ENABLE_INTR)
-
-
-/****************************************************************************/
-/**
-*
-* Disable the device interrupt. Preserve the contents of the control register.
-*
-* @param BaseAddress is the base address of the device
-*
-* @return None.
-*
-* @note None.
-*
-*****************************************************************************/
-#define XUartLite_mDisableIntr(BaseAddress) \
- XUartLite_mSetControlReg((BaseAddress), \
- XUartLite_mGetControlReg((BaseAddress)) & ~XUL_CR_ENABLE_INTR)
-
-
-/************************** Function Prototypes *****************************/
-
-void XUartLite_SendByte(u32 BaseAddress, u8 Data);
-u8 XUartLite_RecvByte(u32 BaseAddress);
-
-
-#endif /* end of protection macro */
#ifndef __MICROBLAZE_IO_H__
#define __MICROBLAZE_IO_H__
+#include <asm/types.h>
+
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define readb(addr) \
+++ /dev/null
-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/xuartlite_l.h>
#define LCRR_CLKDIV_4 0x00000004
#define LCRR_CLKDIV_8 0x00000008
+/* LTEDR - Transfer Error Check Disable Register
+ */
+#define LTEDR_BMD 0x80000000 /* Bus monitor disable */
+#define LTEDR_PARD 0x20000000 /* Parity error checking disabled */
+#define LTEDR_WPD 0x04000000 /* Write protect error checking diable */
+#define LTEDR_WARA 0x00800000 /* Write-after-read-atomic error checking diable */
+#define LTEDR_RAWA 0x00400000 /* Read-after-write-atomic error checking disable */
+#define LTEDR_CSD 0x00080000 /* Chip select error checking disable */
+
#endif /* __ASM_PPC_FSL_LBC_H */
uint lynxdcr1; /* 0xe0f08 - Lynx debug control register 1*/
int res14[6];
uint ddrioovcr; /* 0xe0f24 - DDR IO Overdrive Control register */
- char res15[61656];
+ char res15[216];
} ccsr_gur_t;
+/*
+ * Watchdog register block(0xe_4000-0xe_4fff)
+ */
+typedef struct ccsr_wdt {
+ uint res0;
+ uint swcrr; /* System watchdog control register */
+ uint swcnr; /* System watchdog count register */
+ char res1[2];
+ ushort swsrr; /* System watchdog service register */
+ char res2[4080];
+} ccsr_wdt_t;
+
typedef struct immap {
ccsr_local_mcm_t im_local_mcm;
ccsr_ddr_t im_ddr1;
char res5[389120];
ccsr_rio_t im_rio;
ccsr_gur_t im_gur;
+ char res6[12288];
+ ccsr_wdt_t im_wdt;
} immap_t;
extern immap_t *immr;
/* e500 definitions */
#define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */
#define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */
+#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */
#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
+#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */
+#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */
+#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
+#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
+#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
+#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
+#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
+#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
+#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
+#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */
#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
#define MCSRR1 SPRN_MCSRR1
#define L1CSR0 SPRN_L1CSR0
#define L1CSR1 SPRN_L1CSR1
+#define L1CSR2 SPRN_L1CSR2
#define L1CFG0 SPRN_L1CFG0
#define L1CFG1 SPRN_L1CFG1
+#define L2CFG0 SPRN_L2CFG0
+#define L2CSR0 SPRN_L2CSR0
+#define L2CSR1 SPRN_L2CSR1
#define MCSR SPRN_MCSR
#define MMUCSR0 SPRN_MMUCSR0
#define BUCSR SPRN_BUCSR
/* Some parts define SVR[0:23] as the SOC version */
#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */
+/* whether MPC8xxxE (i.e. has SEC) */
+#if defined(CONFIG_MPC85xx)
+#define IS_E_PROCESSOR(svr) (svr & 0x80000)
+#else
+#if defined(CONFIG_MPC83XX)
+#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000))
+#endif
+#endif
+
/*
* SVR_SOC_VER() Version Values
*/
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
+#define CONFIG_MCFTMR
+
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
#define CFG_CS0_CTRL 0x00101980
#ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE 0xF8000000
+#define CFG_CS1_BASE 0xE0000000
#define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL 0x00000D80
+#define CFG_CS1_CTRL 0x00101D80
#endif
#endif /* _M5475EVB_H */
#define CFG_CS0_CTRL 0x00101980
#ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE 0xF8000000
+#define CFG_CS1_BASE 0xE0000000
#define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL 0x00000D80
+#define CFG_CS1_CTRL 0x00101D80
#endif
#endif /* _M5485EVB_H */
*/
#define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */
-#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
-
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
#define CFG_BR0_PRELIM 0xff801001
#define CFG_OR0_PRELIM 0xff806e65
#define CFG_OR1_PRELIM 0xff806e65
-#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE}
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
#define CFG_FLASH_QUIET_TEST
-#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM 1
-#define CFG_INIT_L1_LOCK 1
-#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */
-#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */
-
-/* define to use L2SRAM as initial stack */
-#undef CONFIG_L2_INIT_RAM
-#define CFG_INIT_L2_ADDR 0xf8fc0000
-#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */
-
-#ifdef CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR
-#define CFG_INIT_RAM_END CFG_INIT_L1_END
-#else
-#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR
-#define CFG_INIT_RAM_END CFG_INIT_L2_END
-#endif
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */
+#define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */
+
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
/* Serial Port - controlled on board with jumper J8
* open - index 2
#if defined(CONFIG_PCI)
+/*PCIE video card used*/
+#define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS
+
+/*PCI video card used*/
+/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_BIOSEMU
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_ATI_RADEON_FB
+#define CONFIG_VIDEO_LOGO
+/*#define CONFIG_CONSOLE_CURSOR*/
+#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#endif
+
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#if CFG_MONITOR_BASE > 0xfff80000
#define CFG_ENV_ADDR 0xfff80000
#else
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000)
#endif
#define CFG_ENV_SIZE 0x2000
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */
#define CONFIG_BAUDRATE 115200
#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyCPM\0" \
- "ramdiskaddr=1000000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=mpc8560ads.dtb\0"
+ "netdev=eth0\0" \
+ "consoledev=ttyCPM\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=your.ramdisk.u-boot\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8560ads.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
#endif
#endif
-#define CFG_ID_EEPROM
-#ifdef CFG_ID_EEPROM
#define CONFIG_ID_EEPROM
-#endif
-#define ID_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_NXID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH 128M */
#endif
-#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_WATCHDOG /* watchdog enabled */
+#define CFG_WATCHDOG_FREQ 5000 /* Feed interval, 5s */
/*DIU Configuration*/
#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/
#define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */
#endif
-#define CFG_ID_EEPROM 1
-#ifdef CFG_ID_EEPROM
#define CONFIG_ID_EEPROM
-#endif
-#define ID_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_NXID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
/*
* In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000.
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2008
+ * Matrix-Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <version.h>
+
+#define CONFIG_MPC5xxx 1
+#define CONFIG_MPC5200 1
+
+#define CFG_MPC5XXX_CLKIN 33000000
+
+#define BOOTFLAG_COLD 0x01
+#define BOOTFLAG_WARM 0x02
+
+#define CONFIG_MISC_INIT_R 1
+
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5
+#endif
+
+#define CONFIG_PSC_CONSOLE 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#undef CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CFG_XLB_PIPELINING 1
+#define CONFIG_HIGH_BATS 1
+
+#define MV_CI mvBlueCOUGAR-P
+#define MV_VCI mvBlueCOUGAR-P
+#define MV_FPGA_DATA 0xff860000
+#define MV_FPGA_SIZE 0x0003c886
+#define MV_KERNEL_ADDR 0xffc00000
+#define MV_INITRD_ADDR 0xff900000
+#define MV_INITRD_LENGTH 0x00300000
+#define MV_SCRATCH_ADDR 0x00000000
+#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH
+#define MV_AUTOSCR_ADDR 0xff840000
+#define MV_AUTOSCR_ADDR2 0xff850000
+#define MV_DTB_ADDR 0xfffc0000
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define MV_KERNEL_ADDR_RAM 0x00100000
+#define MV_DTB_ADDR_RAM 0x00600000
+#define MV_INITRD_ADDR_RAM 0x01000000
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define MV_DTB_NAME mvbc-p.dtb
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_FPGA
+
+#undef CONFIG_WATCHDOG
+
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_RANDOM_DELAY
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Autoboot
+ */
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "s"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1000
+
+#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
+ then autoscr ${autoscr_addr}; \
+ else autoscr ${autoscr_addr2}; \
+ fi;"
+
+#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
+#define CONFIG_ENV_OVERWRITE
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0" \
+ "console=yes\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ "fpga=0\0" \
+ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
+ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
+ "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \
+ "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \
+ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
+ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
+ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
+ "mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \
+ "mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \
+ "mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0" \
+ "mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0" \
+ "dtb_name=" MK_STR(MV_DTB_NAME) "\0" \
+ "mv_scratch_addr=" MK_STR(MV_SCRATCH_ADDR) "\0" \
+ "mv_scratch_length=" MK_STR(MV_SCRATCH_LENGTH) "\0" \
+ "mv_version=" U_BOOT_VERSION "\0" \
+ "dhcp_client_id=" MK_STR(MV_CI) "\0" \
+ "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \
+ "netretry=no\0" \
+ "use_static_ipaddr=no\0" \
+ "static_ipaddr=192.168.90.10\0" \
+ "static_netmask=255.255.255.0\0" \
+ "static_gateway=0.0.0.0\0" \
+ "initrd_name=uInitrd.mvbc-p-rfs\0" \
+ "zcip=no\0" \
+ "netboot=yes\0" \
+ "mvtest=Ff\0" \
+ "tried_bootfromflash=no\0" \
+ "tried_bootfromnet=no\0" \
+ "use_dhcp=yes\0" \
+ "gev_start=yes\0" \
+ "mvbcdma_debug=0\0" \
+ "mvbcia_debug=0\0" \
+ "propdev_debug=0\0" \
+ "gevss_debug=0\0" \
+ "watchdog=1\0" \
+ ""
+
+#undef XMK_STR
+#undef MK_STR
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBCLK_EQUALS_XLBCLK
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2
+
+/*
+ * Flash configuration
+ */
+#undef CONFIG_FLASH_16BIT
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_FLASH_ERASE_TOUT 50000
+#define CFG_FLASH_WRITE_TOUT 1000
+
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 256
+
+#define CFG_LOWBOOT
+#define CFG_FLASH_BASE TEXT_BASE
+#define CFG_FLASH_SIZE 0x00800000
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_FLASH_PROTECTION
+
+#define CFG_ENV_ADDR 0xFFFE0000
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT 1
+#endif
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN (512 << 10)
+#define CFG_MALLOC_LEN (512 << 10)
+#define CFG_BOOTMAPSZ (8 << 20)
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 5
+
+#define CONFIG_E1000
+#define CONFIG_E1000_FALLBACK_MAC 0xb6b445ebfbc0
+#undef CONFIG_MPC5xxx_FEC
+#undef CONFIG_PHY_ADDR
+#define CONFIG_NETDEV eth0
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING
+#define CFG_PROMPT_HUSH_PS2 "> "
+#undef CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024
+#else
+#define CFG_CBSIZE 256
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE CFG_CBSIZE
+
+#define CFG_MEMTEST_START 0x00800000
+#define CFG_MEMTEST_END 0x02f00000
+
+#define CFG_HZ 1000
+
+/* default load address */
+#define CFG_LOAD_ADDR 0x02000000
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 0x00200000
+
+/*
+ * Various low-level settings
+ */
+#define CFG_GPS_PORT_CONFIG 0x20000004
+
+#define CFG_HID0_INIT (HID0_ICE | HID0_ICFI)
+#define CFG_HID0_FINAL HID0_ICE
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00047800
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+#define CFG_CS_BURST 0x000000f0
+#define CFG_CS_DEADCYCLE 0x33333303
+
+#define CFG_RESET_ADDRESS 0x00000100
+
+#undef FPGA_DEBUG
+#undef CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA_ALTERA 1
+#define CONFIG_FPGA_CYCLON2 1
+#define CONFIG_FPGA_COUNT 1
+
+#endif
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_ADS5121 1
/*
* Memory map for the ADS5121 board:
*
/* CONFIG_PCI is defined at config time */
+#ifdef CONFIG_ADS5121_REV2
#define CFG_MPC512X_CLKIN 66000000 /* in Hz */
+#else
+#define CFG_MPC512X_CLKIN 33333333 /* in Hz */
+#define CONFIG_PCI
+#endif
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R
/*
* DDR Setup - manually set all parameters as there's no SPD etc.
*/
+#ifdef CONFIG_ADS5121_REV2
#define CFG_DDR_SIZE 256 /* MB */
+#else
+#define CFG_DDR_SIZE 512 /* MB */
+#endif
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
#define CFG_SDRAM_BASE CFG_DDR_BASE
* [09:05] DRAM tRP:
* [04:00] DRAM tRPA
*/
-
+#ifdef CONFIG_ADS5121_REV2
#define CFG_MDDRC_SYS_CFG 0xF8604A00
#define CFG_MDDRC_SYS_CFG_RUN 0xE8604A00
+#define CFG_MDDRC_TIME_CFG1 0x54EC1168
+#define CFG_MDDRC_TIME_CFG2 0x35210864
+#else
+#define CFG_MDDRC_SYS_CFG 0xFA804A00
+#define CFG_MDDRC_SYS_CFG_RUN 0xEA804A00
+#define CFG_MDDRC_TIME_CFG1 0x68EC1168
+#define CFG_MDDRC_TIME_CFG2 0x34310864
+#endif
#define CFG_MDDRC_SYS_CFG_EN 0xF0000000
#define CFG_MDDRC_TIME_CFG0 0x00003D2E
#define CFG_MDDRC_TIME_CFG0_RUN 0x06183D2E
-#define CFG_MDDRC_TIME_CFG1 0x54EC1168
-#define CFG_MDDRC_TIME_CFG2 0x35210864
#define CFG_MICRON_NOP 0x01380000
#define CFG_MICRON_PCHG_ALL 0x01100400
/*
* NOR FLASH on the Local Bus
*/
+#undef CONFIG_BKUP_FLASH
#define CFG_FLASH_CFI /* use the Common Flash Interface */
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#ifdef CONFIG_BKUP_FLASH
+#define CFG_FLASH_BASE 0xFF800000 /* start of FLASH */
+#define CFG_FLASH_SIZE 0x00800000 /* max flash size in bytes */
+#else
#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */
#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */
+#endif
#define CFG_FLASH_USE_BUFFER_WRITE
-
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
#define CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 0x1
#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_FEC_AN_TIMEOUT 1
-#if 0
/*
* Configure on-board RTC
*/
-#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */
#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-#endif
/*
* Environment
/* This has to be a multiple of the Flash sector size */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x2000
+#ifdef CONFIG_BKUP_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */
+#else
#define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */
+#endif
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_NAND
#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "bootm 40000"
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
-#define CONFIG_CMDLINE_TAG
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+/* #define CONFIG_INITRD_TAG 1 */
/*
* Current memory map for Vibren supplied Linux images:
* MA 02111-1307 USA
*/
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
+/* sbc8560 board configuration file */
+/* please refer to doc/README.sbc8560 for more info */
/* make sure you change the MAC address and other network params first,
* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
*/
#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#if defined(CONFIG_MPC85xx_REV1)
- #define CONFIG_DDR_DLL /* possible DLL fix needed */
+ #define CONFIG_DDR_DLL /* possible DLL fix needed */
#endif
#undef CONFIG_CLOCKS_IN_MHZ
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
+#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on something else */
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
/*
* I2C
*/
#define CFG_PCI_MEM_PHYS 0xC0000000
#define CFG_PCI_MEM_SIZE 0x10000000
-#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
-# define CONFIG_NET_MULTI 1
-# define CONFIG_MII 1 /* MII PHY management */
-# define CONFIG_MPC85xx_TSEC1
-# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
-# define TSEC1_PHY_ADDR 25
-# define TSEC1_PHYIDX 0
-/* Options are: TSEC0 */
-# define CONFIG_ETHPRIME "TSEC0"
+#ifndef CONFIG_MII
+#define CONFIG_MII 1 /* MII PHY management */
+#endif
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define TSEC1_PHY_ADDR 0x19
+#define TSEC2_PHY_ADDR 0x1a
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC2_FLAGS TSEC_GIGABIT
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
* FLASH and environment organization
*/
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_PROTECTION /* use hardware protection */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION /* use hardware protection */
#endif
-#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if 0
/* XXX This doesn't work and I don't want to fix it */
#define CFG_ENV_SIZE 0x2000
#endif
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
- #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-# define CONFIG_ETHADDR 00:01:af:07:9b:8a
-# define CONFIG_HAS_ETH1
-# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
-# define CONFIG_HAS_ETH2
-# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_SERVERIP 192.168.0.131
-#define CONFIG_IPADDR 192.168.0.105
-#define CONFIG_GATEWAYIP 0.0.0.0
-#define CONFIG_NETMASK 255.255.255.0
+/* You can compile in a MAC address and your custom net settings by using
+ * the following syntax. Your board should be marked with the assigned
+ * MAC addresses directly on it.
+ *
+ * #define CONFIG_ETHADDR de:ad:be:ef:00:00
+ * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s!
+ * #define CONFIG_SERVERIP <server ip>
+ * #define CONFIG_IPADDR <board ip>
+ * #define CONFIG_GATEWAYIP <gateway ip>
+ * #define CONFIG_NETMASK <your netmask>
+ */
+
#define CONFIG_HOSTNAME SBC8560
#define CONFIG_ROOTPATH /home/ppc
-#define CONFIG_BOOTFILE pImage
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=ramdisk.uboot\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=sbc8560.dtb\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
#endif /* __CONFIG_H */
#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */
#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */
-#define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */
+#define CONFIG_DTT_DS1722 /* Dallas DS1722 SPI Temperature probe */
/* allow to overwrite serial and ethaddr */
/*-------------------------------------------------------------------------------------------------*/
#define AT45DB161 0x2c
+#define AT45DB021 0x14
#define AT45DB321 0x34
#define AT45DB642 0x3c
#define AT45DB128 0x10
#define DTT_COMMERCIAL_MAX_TEMP 70 /* 0 - +70 C */
#define DTT_INDUSTRIAL_MAX_TEMP 85 /* -40 - +85 C */
#define DTT_AUTOMOTIVE_MAX_TEMP 105 /* -40 - +105 C */
+
#ifndef CFG_DTT_MAX_TEMP
#define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP
#endif
+
#ifndef CFG_DTT_HYSTERESIS
#define CFG_DTT_HYSTERESIS 5 /* 5 C */
#endif
extern int dtt_get_temp(int sensor);
#endif
-#if defined(CONFIG_DTT_LM75)
-#define DTT_READ_TEMP 0x0
-#define DTT_CONFIG 0x1
-#define DTT_TEMP_HYST 0x2
-#define DTT_TEMP_SET 0x3
-#endif
-
-#if defined(CONFIG_DTT_LM81)
-#define DTT_READ_TEMP 0x27
-#define DTT_CONFIG_TEMP 0x4b
-#define DTT_TEMP_MAX 0x39
-#define DTT_TEMP_HYST 0x3a
-#define DTT_CONFIG 0x40
-#endif
-
-#if defined(CONFIG_DTT_DS1621)
-#define DTT_READ_TEMP 0xAA
-#define DTT_READ_COUNTER 0xA8
-#define DTT_READ_SLOPE 0xA9
-#define DTT_WRITE_START_CONV 0xEE
-#define DTT_WRITE_STOP_CONV 0x22
-#define DTT_TEMP_HIGH 0xA1
-#define DTT_TEMP_LOW 0xA2
-#define DTT_CONFIG 0xAC
-#endif
-
-#if defined(CONFIG_DTT_DS1775)
-#define DTT_READ_TEMP 0x0
-#define DTT_CONFIG 0x1
-#define DTT_TEMP_HYST 0x2
-#define DTT_TEMP_OS 0x3
-#endif
-
-#if defined(CONFIG_DTT_ADM1021)
-#define DTT_READ_LOC_VALUE 0x00
-#define DTT_READ_REM_VALUE 0x01
-#define DTT_READ_STATUS 0x02
-#define DTT_READ_CONFIG 0x03
-#define DTT_READ_CONVRATE 0x04
-#define DTT_READ_LOC_HIGHLIM 0x05
-#define DTT_READ_LOC_LOWLIM 0x06
-#define DTT_READ_REM_HIGHLIM 0x07
-#define DTT_READ_REM_LOWLIM 0x08
-#define DTT_READ_DEVID 0xfe
-
-#define DTT_WRITE_CONFIG 0x09
-#define DTT_WRITE_CONVRATE 0x0a
-#define DTT_WRITE_LOC_HIGHLIM 0x0b
-#define DTT_WRITE_LOC_LOWLIM 0x0c
-#define DTT_WRITE_REM_HIGHLIM 0x0d
-#define DTT_WRITE_REM_LOWLIM 0x0e
-#define DTT_WRITE_ONESHOT 0x0f
-
-#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */
-#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */
-#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */
-#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */
-#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */
-#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */
-
-#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */
-#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */
-
-#define DTT_ADM1021_DEVID 0x41
-#endif
-
-#if defined(CONFIG_DTT_LM73)
-#define DTT_READ_TEMP 0x0
-#define DTT_CONFIG 0x1
-#define DTT_TEMP_HIGH 0x2
-#define DTT_TEMP_LOW 0x3
-#define DTT_CONTROL 0x4
-#define DTT_ID 0x7
-#endif
-
#endif /* _DTT_H_ */
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
#endif /* CONFIG_HAS_FSL_DR_USB */
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX)
+void fdt_fixup_crypto_node(void *blob, int sec_rev);
+#else
+static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
+#endif
+
#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup(void *blob, bd_t *bd);
void ft_cpu_setup(void *blob, bd_t *bd);
#define GPIO_PSC3_9 0x04000000UL
#define GPIO_PSC1_4 0x01000000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_7 0x00002000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_6 0x00001000UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_3 0x00000800UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_2 0x00000400UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_1 0x00000200UL
+#define MPC5XXX_GPIO_SIMPLE_PSC3_0 0x00000100UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_3 0x00000080UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_2 0x00000040UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_1 0x00000020UL
+#define MPC5XXX_GPIO_SIMPLE_PSC2_0 0x00000010UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_3 0x00000008UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_2 0x00000004UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_1 0x00000002UL
+#define MPC5XXX_GPIO_SIMPLE_PSC1_0 0x00000001UL
+
+#define MPC5XXX_GPIO_SINT_PSC3_5 0x02
+#define MPC5XXX_GPIO_SINT_PSC3_4 0x01
+
+#define MPC5XXX_GPIO_WKUP_7 0x80
+#define MPC5XXX_GPIO_WKUP_6 0x40
+#define MPC5XXX_GPIO_WKUP_PSC6_1 0x20
+#define MPC5XXX_GPIO_WKUP_PSC6_0 0x10
+#define MPC5XXX_GPIO_WKUP_ETH17 0x08
+#define MPC5XXX_GPIO_WKUP_PSC3_9 0x04
+#define MPC5XXX_GPIO_WKUP_PSC2_4 0x02
+#define MPC5XXX_GPIO_WKUP_PSC1_4 0x01
+
/* PCI registers */
#define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04)
#define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c)
#endif
#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16)
-#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */
+#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20)
+#define SPR_831X_FAMILY 0x80B
#define SPR_8311 0x80B2
#define SPR_8313 0x80B0
#define SPR_8314 0x80B6
#define SPR_8315 0x80B4
+#define SPR_832X_FAMILY 0x806
#define SPR_8321 0x8066
#define SPR_8323 0x8062
+#define SPR_834X_FAMILY 0x803
#define SPR_8343 0x8036
#define SPR_8347_TBGA_ 0x8032
#define SPR_8347_PBGA_ 0x8034
#define SPR_8349 0x8030
+#define SPR_836X_FAMILY 0x804
#define SPR_8358_TBGA_ 0x804A
#define SPR_8358_PBGA_ 0x804E
#define SPR_8360 0x8048
+#define SPR_837X_FAMILY 0x80C
#define SPR_8377 0x80C6
#define SPR_8378 0x80C4
#define SPR_8379 0x80C2
#endif
#if defined(CONFIG_440)
+/*
+ * Enable long long (%ll ...) printf format on 440 PPC's since most of
+ * them support 36bit physical addressing
+ */
+#define CFG_64BIT_VSPRINTF
+#define CFG_64BIT_STRTOUL
#include <ppc440.h>
#else
#include <ppc405.h>
# endif
static void setup_commandline_tag (bd_t *bd, char *commandline);
-#if 0
-static void setup_ramdisk_tag (bd_t *bd);
-#endif
# ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag (bd_t *bd, ulong initrd_start,
ulong initrd_end);
debug(" memory.size = 0x%llx\n",
(unsigned long long)lmb->memory.size);
for (i=0; i < lmb->memory.cnt ;i++) {
- debug(" memory.reg[0x%x].base = 0x%llx\n", i,
- lmb->memory.region[i].base);
+ debug(" memory.reg[0x%lx].base = 0x%llx\n", i,
+ (long long unsigned)lmb->memory.region[i].base);
debug(" .size = 0x%llx\n",
- lmb->memory.region[i].size);
+ (long long unsigned)lmb->memory.region[i].size);
}
- debug("\n reserved.cnt = 0x%lx\n", lmb->reserved.cnt);
- debug(" reserved.size = 0x%llx\n", lmb->reserved.size);
+ debug("\n reserved.cnt = 0x%lx\n",
+ lmb->reserved.cnt);
+ debug(" reserved.size = 0x%llx\n",
+ (long long unsigned)lmb->reserved.size);
for (i=0; i < lmb->reserved.cnt ;i++) {
- debug(" reserved.reg[0x%x].base = 0x%llx\n", i,
- lmb->reserved.region[i].base);
+ debug(" reserved.reg[0x%lx].base = 0x%llx\n", i,
+ (long long unsigned)lmb->reserved.region[i].base);
debug(" .size = 0x%llx\n",
- lmb->reserved.region[i].size);
+ (long long unsigned)lmb->reserved.region[i].size);
}
#endif /* DEBUG */
}
if (alloc == 0)
printf("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
- size, max_addr);
+ (ulong)size, (ulong)max_addr);
return alloc;
}
/* get the conversion qualifier */
qualifier = -1;
- if (*fmt == 'h' || *fmt == 'l' || *fmt == 'q') {
+ if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' ||
+ *fmt == 'Z' || *fmt == 'z' || *fmt == 't' ||
+ *fmt == 'q' ) {
qualifier = *fmt;
if (qualifier == 'l' && *(fmt+1) == 'l') {
qualifier = 'q';
num = va_arg(args, unsigned long long);
else
#endif
- if (qualifier == 'l')
+ if (qualifier == 'l') {
num = va_arg(args, unsigned long);
- else if (qualifier == 'h') {
+ } else if (qualifier == 'Z' || qualifier == 'z') {
+ num = va_arg(args, size_t);
+ } else if (qualifier == 't') {
+ num = va_arg(args, ptrdiff_t);
+ } else if (qualifier == 'h') {
num = (unsigned short) va_arg(args, int);
if (flags & SIGN)
num = (short) num;
static int init_baudrate (void)
{
- uchar tmp[64]; /* long enough for environment variables */
+ char tmp[64]; /* long enough for environment variables */
int i = getenv_r ("baudrate", tmp, sizeof (tmp));
gd->baudrate = (i > 0)
#ifdef CONFIG_PRAM
int i;
ulong reg;
- uchar tmp[64]; /* long enough for environment variables */
+ char tmp[64]; /* long enough for environment variables */
#endif
/* Pointer is writable since we allocated a register for it */
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
gd->bd = bd;
- debug ("Reserving %d Bytes for Board Info at: %08lx\n",
+ debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
- debug ("Reserving %d Bytes for Global Data at: %08lx\n",
+ debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/* Reserve memory for boot params. */
*/
{
ulong pram;
- uchar memsz[32];
+ char memsz[32];
#ifdef CONFIG_PRAM
char *s;
addr_sp -= sizeof(bd_t);
bd = (bd_t *)addr_sp;
gd->bd = bd;
- debug ("Reserving %d Bytes for Board Info at: %08lx\n",
+ debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof(bd_t), addr_sp);
addr_sp -= sizeof(gd_t);
id = (gd_t *)addr_sp;
- debug ("Reserving %d Bytes for Global Data at: %08lx\n",
+ debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/* Reserve memory for boot params.
char *commandline = getenv ("bootargs");
char env_buf[12];
int ret;
- const char *cp;
+ char *cp;
/* find kernel entry point */
if (images->legacy_hdr_valid) {
linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline);
#ifdef CONFIG_MEMSIZE_IN_BYTES
- sprintf (env_buf, "%lu", gd->ram_size);
-#ifdef DEBUG
- printf ("## Giving linux memsize in bytes, %lu\n", gd->ram_size);
-#endif
+ sprintf (env_buf, "%lu", (ulong)gd->ram_size);
+ debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size);
#else
- sprintf (env_buf, "%lu", gd->ram_size >> 20);
-#ifdef DEBUG
- printf ("## Giving linux memsize in MB, %lu\n", gd->ram_size >> 20);
-#endif
+ sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20));
+ debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20));
#endif /* CONFIG_MEMSIZE_IN_BYTES */
linux_env_set ("memsize", env_buf);
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
gd->bd = bd;
- debug ("Reserving %d Bytes for Board Info at: %08lx\n",
+ debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
- debug ("Reserving %d Bytes for Global Data at: %08lx\n",
+ debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/*
Bootp_t *bp;
char *s;
- debug ("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%d)\n",
+ debug ("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%zu)\n",
src, dest, len, sizeof (Bootp_t));
bp = (Bootp_t *)pkt;
if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC))
DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp);
- BootpCopyNetParams(bp); /* Store net params from reply */
-
NetSetTimeout(TIMEOUT * CFG_HZ, BootpTimeout);
DhcpSendRequestPkt(bp);
#ifdef CFG_BOOTFILE_PREFIX
#if defined(CONFIG_MCF52x2)
mcf52x2_miiphy_initialize(bis);
#endif
-#if defined(CONFIG_NETARM)
+#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
ns7520_miiphy_initialize(bis);
#endif
#if defined(CONFIG_DRIVER_TI_EMAC)
puts ("Got IP\n");
#endif
if (len < IP_HDR_SIZE) {
- debug ("len bad %d < %d\n", len, IP_HDR_SIZE);
+ debug ("len bad %d < %lu\n", len, (ulong)IP_HDR_SIZE);
return;
}
if (len < ntohs(ip->ip_len)) {
xsum = (xsum & 0x0000ffff) + ((xsum >> 16) & 0x0000ffff);
}
if ((xsum != 0x00000000) && (xsum != 0x0000ffff)) {
- printf(" UDP wrong checksum %08x %08x\n", xsum, ntohs(ip->udp_xsum));
+ printf(" UDP wrong checksum %08lx %08x\n",
+ xsum, ntohs(ip->udp_xsum));
return;
}
}
{0x3b, "CSRR1", 0x00000000, 0x00000000},
{0x3d, "DEAR", 0x00000000, 0x00000000},
{0x3e, "ESR", 0x00000000, 0x00000000},
+#ifdef CONFIG_440
{0x3f, "IVPR", 0xffff0000, 0x00000000},
+#endif
{0x100, "USPRG0", 0x00000000, 0x00000000},
{0x104, "SPRG4", 0x00000000, 0x00000000},
{0x105, "SPRG5", 0x00000000, 0x00000000},
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
if (ret == 0)
{
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
{
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
{
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
int cpu_post_test_complex (void)
{
int ret = 0;
+ int flag = disable_interrupts();
if (ret == 0)
{
post_log ("Error at complex test !\n");
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
int ret = 0;
unsigned int i;
unsigned long cr_sav;
+ int flag = disable_interrupts();
asm ( "mfcr %0" : "=r" (cr_sav) : );
asm ( "mtcr %0" : : "r" (cr_sav));
+ if (flag)
+ enable_interrupts();
+
return ret;
}
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_load_size && ret == 0; i++)
{
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
if (ret == 0)
{
post_log ("Error at multi test !\n");
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
for (i = 0; i < cpu_post_store_size && ret == 0; i++)
{
}
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
{
int ret = 0;
unsigned int i;
+ int flag = disable_interrupts();
if (ret == 0)
{
post_log ("Error at string test !\n");
}
+ if (flag)
+ enable_interrupts();
+
return ret;
}
/img2srec
/md5.c
/mkimage
+/mpc86x_clk
+/ncp
/sha1.c
/ubsha1
+/inca-swap-bytes
/image.c
/fdt.c
/fdt_ro.c
ifeq ($(HOSTOS),cygwin)
all:
-.depend:
+$(obj).depend:
else # ! CYGWIN
erased = 0;
- for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
+ for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
ulong b_end;
int sect;
protected = 0;
- for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
+ for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
ulong b_end;
int sect;
flash_info_t *info;
int i;
- for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+ for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
if (info->flash_id != FLASH_UNKNOWN &&
addr >= info->start[0] &&
/* WARNING - The '- 1' is needed if the flash
projects / u-boot / commitdiff