* MA 02111-1307 USA
*/
#include <common.h>
+#include <netdev.h>
#include <asm/arch/omap2420.h>
#include <asm/io.h>
#include <asm/arch/bits.h>
}
/*******************************************************************
- * Routine:ether_init
+ * Routine:board_eth_init
* Description: take the Ethernet controller out of reset and wait
* for the EEPROM load to complete.
******************************************************************/
-void ether_init(void)
+int board_eth_init(bd_t *bis)
{
-#ifdef CONFIG_DRIVER_LAN91C96
+ int rc = 0;
+#ifdef CONFIG_LAN91C96
int cnt = 20;
__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
mask_config_reg(ETH_CONTROL_REG, 0x01);
udelay(1000);
-
+ rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
eth_reset_err_out:
- return;
#endif
+ return rc;
}
/**********************************************
/*
* Hardware drivers
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
#define CONFIG_SMC_USE_32_BIT
#undef CONFIG_SHOW_ACTIVITY
/*
* SMC91c96 Etherent
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300)
#define CONFIG_LAN91C96_EXT_PHY
/*
* Hardware drivers
*/
-#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
#define CONFIG_LAN91C96_BASE 0x18000000
/*
/*
* Hardware drivers
*/
-#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
#define CONFIG_LAN91C96_BASE 0x100e0000
/*
/*
* Hardware drivers
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x0C000000
/*
#define CONFIG_SMC9196_BASE 0x08000300
#define CONFIG_SMC9196_EXT_PHY
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x08000300
#define CONFIG_LAN91C96_EXT_PHY
/*
* Hardware drivers
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x04000300
#define CONFIG_LAN91C96_EXT_PHY
*/
/*
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x04000300
#define CONFIG_LAN91C96_EXT_PHY
/*
* SMC91c96 Etherent
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300)
#define CONFIG_LAN91C96_EXT_PHY
*/
/*
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x04800300
#define CONFIG_LAN91C96_EXT_PHY
* Hardware drivers
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x04000300
#define CONFIG_LAN91C96_EXT_PHY
*/
/* None - PLEB 2 doesn't have any of this.
- #define CONFIG_DRIVER_LAN91C96
- #define CONFIG_LAN91C96_BASE 0x0C000000 */
+ #define CONFIG_NET_MULTI
+ #define CONFIG_LAN91C96
+ #define CONFIG_LAN91C96_BASE 0x0C000000
+ */
/*
* select serial console configuration