]> git.sur5r.net Git - u-boot/commitdiff
arm64: mvebu: armada-8k: Only configure xHCI power on DB-88F7040 board
authorStefan Roese <sr@denx.de>
Tue, 25 Oct 2016 10:41:45 +0000 (12:41 +0200)
committerStefan Roese <sr@denx.de>
Mon, 5 Dec 2016 12:28:23 +0000 (13:28 +0100)
This patch uses of_machine_is_compatible() to detect the board at runtime
and only configured the I2C IO expander for the xHCI power / reset on
the DB-88F7040 board. As this code will be used by other Armada-7k/8k
ports, its necessary to use this runtime detection here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
board/Marvell/mvebu_armada-8k/board.c

index 48bd55c372ccb2de4825c2b33cd71fe1a4429b18..7d1b5d9f6239cec6dcd49c20d5ce0b306efebb63 100644 (file)
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <i2c.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Information specific to the DB-88F7040 eval board. We strive to use
+ * DT for such platform specfic configurations. At some point, this
+ * might be removed here and implemented via DT.
+ */
 /* IO expander I2C device */
 #define I2C_IO_EXP_ADDR                0x21
 #define I2C_IO_CFG_REG_0       0x6
@@ -44,45 +50,47 @@ int board_xhci_config(void)
        int ret;
        u8 buf[8];
 
-       /* Configure IO exander PCA9555: 7bit address 0x21 */
-       ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
-       if (ret) {
-               printf("Cannot find PCA9555: %d\n", ret);
-               return 0;
-       }
-
-       /*
-        * Read configuration (direction) and set VBUS pin as output
-        * (reset pin = output)
-        */
-       ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1);
-       if (ret) {
-               printf("Failed to read IO expander value via I2C\n");
-               return -EIO;
-       }
-       buf[0] &= ~I2C_IO_REG_VBUS;
-       buf[0] &= ~I2C_IO_REG_CL;
-       ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1);
-       if (ret) {
-               printf("Failed to set IO expander via I2C\n");
-               return -EIO;
-       }
-
-       /* Read output value and configure it */
-       ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-       if (ret) {
-               printf("Failed to read IO expander value via I2C\n");
-               return -EIO;
+       if (of_machine_is_compatible("marvell,armada7040-db")) {
+               /* Configure IO exander PCA9555: 7bit address 0x21 */
+               ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
+               if (ret) {
+                       printf("Cannot find PCA9555: %d\n", ret);
+                       return 0;
+               }
+
+               /*
+                * Read configuration (direction) and set VBUS pin as output
+                * (reset pin = output)
+                */
+               ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1);
+               if (ret) {
+                       printf("Failed to read IO expander value via I2C\n");
+                       return -EIO;
+               }
+               buf[0] &= ~I2C_IO_REG_VBUS;
+               buf[0] &= ~I2C_IO_REG_CL;
+               ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1);
+               if (ret) {
+                       printf("Failed to set IO expander via I2C\n");
+                       return -EIO;
+               }
+
+               /* Read output value and configure it */
+               ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+               if (ret) {
+                       printf("Failed to read IO expander value via I2C\n");
+                       return -EIO;
+               }
+               buf[0] &= ~I2C_IO_REG_VBUS;
+               buf[0] |= I2C_IO_REG_CL;
+               ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+               if (ret) {
+                       printf("Failed to set IO expander via I2C\n");
+                       return -EIO;
+               }
+
+               mdelay(500); /* required delay to let output value settle */
        }
-       buf[0] &= ~I2C_IO_REG_VBUS;
-       buf[0] |= I2C_IO_REG_CL;
-       ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-       if (ret) {
-               printf("Failed to set IO expander via I2C\n");
-               return -EIO;
-       }
-
-       mdelay(500); /* required delay to let output value settle */
 
        return 0;
 }
@@ -93,38 +101,40 @@ int board_xhci_enable(void)
        int ret;
        u8 buf[8];
 
-       /*
-        * This function enables all USB ports simultaniously,
-        * it only needs to get called once
-        */
-       if (usb_enabled)
-               return 0;
-
-       /* Configure IO exander PCA9555: 7bit address 0x21 */
-       ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
-       if (ret) {
-               printf("Cannot find PCA9555: %d\n", ret);
-               return 0;
-       }
-
-       /* Read VBUS output value */
-       ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-       if (ret) {
-               printf("Failed to read IO expander value via I2C\n");
-               return -EIO;
+       if (of_machine_is_compatible("marvell,armada7040-db")) {
+               /*
+                * This function enables all USB ports simultaniously,
+                * it only needs to get called once
+                */
+               if (usb_enabled)
+                       return 0;
+
+               /* Configure IO exander PCA9555: 7bit address 0x21 */
+               ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
+               if (ret) {
+                       printf("Cannot find PCA9555: %d\n", ret);
+                       return 0;
+               }
+
+               /* Read VBUS output value */
+               ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+               if (ret) {
+                       printf("Failed to read IO expander value via I2C\n");
+                       return -EIO;
+               }
+
+               /* Enable VBUS power: Set output value of VBUS pin as enabled */
+               buf[0] |= I2C_IO_REG_VBUS;
+               ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+               if (ret) {
+                       printf("Failed to set IO expander via I2C\n");
+                       return -EIO;
+               }
+
+               mdelay(500); /* required delay to let output value settle */
+               usb_enabled = 1;
        }
 
-       /* Enable VBUS power: Set output value of VBUS pin as enabled */
-       buf[0] |= I2C_IO_REG_VBUS;
-       ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-       if (ret) {
-               printf("Failed to set IO expander via I2C\n");
-               return -EIO;
-       }
-
-       mdelay(500); /* required delay to let output value settle */
-       usb_enabled = 1;
-
        return 0;
 }