Clear up confusion over the CMD_POST and POST_DIAG mess.

For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
when it really means just CONFIG_CMD_DIAG.  There is no CMD_POST.
Clear this mess up some.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 00b656e737dbe03ef9f69e2ce0d29c3b734a7c9d..aec4d83f25181320435db69b2c7c386900654eb6 100644 (file)
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -138,11 +138,8 @@
                                 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-# define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 # define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-# define CFG_CMD_POST_DIAG 0
 #endif /* CONFIG_POST */
 
 
@@ -161,7 +158,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP
@@ -192,6 +188,10 @@
     #define CONFIG_CMD_PCI
 #endif
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
+
 
 #define CONFIG_TIMESTAMP               /* display image timestamps */
 

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 612b661ad2209a0c40f14ba40ba3fe7f4ffad6e0..2b2d15a7629640ad16288692ec17082fe63ae960 100644 (file)
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -222,12 +222,6 @@
                                                                CFG_POST_UART           | \
                                                                CFG_POST_SPR )
 
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG              0
-#endif
-
 
 /*
  * Command line configuration.
@@ -245,12 +239,14 @@
 #define CONFIG_CMD_FPGA
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_POST_DIAG
 
 #if !defined(CONFIG_SC)
     #define CONFIG_CMD_DOC
 #endif
 
+#ifdef CONFIG_POST
+u #define CONFIG_CMD_DIAG
+#endif
 
 /*
  * There is no IDE/PCMCIA hardware support on the board.

diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 2422201765956148b3898962e8f15261b8b20a3b..2f056059c18cbd13d6d204fc8cd0383c4803a5d0 100644 (file)
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -156,12 +156,6 @@
 #define CONFIG_POST            (CFG_POST_CPU      | \
                                 CFG_POST_RTC      | \
                                 CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
 #endif
 
 
@@ -175,9 +169,11 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
 
 /*
  * Miscellaneous configurable options

diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 184338b97d271fa33b66c56aed9d073cc3043579..c59b70f15c178223e60be3d2d2d593da3c997fe1 100644 (file)
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -167,12 +167,6 @@
 #define CONFIG_POST            (CFG_POST_CPU      | \
                                 CFG_POST_RTC      | \
                                 CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
 #endif
 
 
@@ -187,10 +181,12 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
 
 /*
  * Miscellaneous configurable options

diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index f64c52222381323ccc8ec1cf799c435d41e5a4af..3d90efb1c1754f06f170109f52b0e2820ecd6857 100644 (file)
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -82,11 +82,8 @@
                                 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
 
@@ -95,10 +92,6 @@
  */
 #include <config_cmd_default.h>
 
-#ifdef CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#endif
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -112,12 +105,19 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_USB
 
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG__CMD_DIAG
+#endif
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 24114b82d39090865aba34020b7662dde335a59b..598c1c61c6119a79bafb7e6c78db9cc12a2312a2 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -142,11 +142,8 @@
 #endif
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
 
@@ -164,7 +161,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP
@@ -188,6 +184,10 @@
     #define CONFIG_CFG_FAT
 #endif
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 

diff --git a/include/configs/aev.h b/include/configs/aev.h
index ecd84d3e20caebdd79d134e87d532b5c93cc4ae4..93b20db5cea84667c031745cb584b324f1050202 100644 (file)
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -86,11 +86,8 @@
                                 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
 
@@ -109,10 +106,13 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 36f55d164c883d98a38655fa2ae82f729f77f9dc..bea157a45f6efe8eea45281d942014cbce49c687 100644 (file)
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -144,11 +144,8 @@
 #endif
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG      CFG_CMD_DIAG
 #define FLASH_START_POST_BLOCK 11      /* Should > = 11 */
 #define FLASH_END_POST_BLOCK   71      /* Should < = 71 */
-#else
-#define CFG_CMD_POST_DIAG      0
 #endif
 
 /* CF-CARD IDE-HDD Support */
@@ -197,7 +194,10 @@
 #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
 
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_POST_DIAG
+
+#if defined(CONFIG_POST)
+#define CONFIG_CMD_DIAG
+#endif
 
 #ifdef CONFIG_BF537_NAND
 #define CONFIG_CMD_NAND

diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 3dc7a8eb65054e5dfde64c8e5713e6ac6a9d3417..1db5e90965d8876e3ab333d29b7e4822929fdb20 100644 (file)
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -170,12 +170,6 @@
 
 #define CONFIG_RTC_PCF8563             /* use Philips PCF8563 RTC      */
 
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
-
 
 /*
  * Command line configuration.
@@ -192,9 +186,12 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION

diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 8d098579d79fef63a4c08c9fe69137816d036c3e..a965e8ac8ee40c6cf9b8dc40e370a2bdd16daad7 100644 (file)
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -60,11 +60,8 @@
                                 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
 
@@ -82,10 +79,13 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 

diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index e480df5f9c0e2b7983fc0c70e8a49ed5107564f6..ccfcf1c8dc080fe6a2e2658bce8bd8dc2ca1eef3 100644 (file)
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -116,11 +116,8 @@
                                 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
 
@@ -129,6 +126,18 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 #if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
     #define CONFIG_CMD_FAT
@@ -148,18 +157,9 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
 
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */

diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 2bdc55b4673f974ee9ba835213462a0bb4acabc1..d223c58da32b689bdeecc29c77f0c6ffbe79685a 100644 (file)
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -117,12 +117,6 @@
                                CFG_POST_SPR )
 #undef  CONFIG_POST
 
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG       CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG      0
-#endif
-
 
 /*
  * Command line configuration.
@@ -140,9 +134,12 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define CONFIG_NETCONSOLE