]> git.sur5r.net Git - u-boot/commitdiff
mxs: Make ehci-mxs multiport capable
authorMarek Vasut <marex@denx.de>
Sat, 23 Feb 2013 02:43:02 +0000 (02:43 +0000)
committerStefano Babic <sbabic@denx.de>
Thu, 7 Mar 2013 16:22:57 +0000 (17:22 +0100)
Rework ehci-mxs so it supports both ports on MX28. It was necessary
to wrap the per-port configuration into struct ehci_mxs_port and pull
out the clock configuration function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
drivers/usb/host/ehci-mxs.c
include/configs/apx4devkit.h
include/configs/m28evk.h
include/configs/mx28evk.h
include/configs/sc_sps_1.h

index 0ca7545a349dc50bb1bcf9cc29f4af9cd680e8ae..f320d3eb5d075327ee03fcce7ae4a0150e6e3746 100644 (file)
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
+#include <errno.h>
 
 #include "ehci.h"
 
-#if    (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1)
-#error "MXS EHCI: Invalid port selected!"
-#endif
-
-#ifndef        CONFIG_EHCI_MXS_PORT
-#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!"
-#endif
+/* This DIGCTL register ungates clock to USB */
+#define        HW_DIGCTL_CTRL                  0x8001c000
+#define        HW_DIGCTL_CTRL_USB0_CLKGATE     (1 << 2)
+#define        HW_DIGCTL_CTRL_USB1_CLKGATE     (1 << 16)
 
-static struct ehci_mxs {
-       struct mxs_usb_regs     *usb_regs;
+struct ehci_mxs_port {
+       uint32_t                usb_regs;
        struct mxs_usbphy_regs  *phy_regs;
-} ehci_mxs;
 
-int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port)
+       struct mxs_register_32  *pll;
+       uint32_t                pll_en_bits;
+       uint32_t                pll_dis_bits;
+       uint32_t                gate_bits;
+};
+
+static const struct ehci_mxs_port mxs_port[] = {
+#ifdef CONFIG_EHCI_MXS_PORT0
+       {
+               MXS_USBCTRL0_BASE,
+               (struct mxs_usbphy_regs *)MXS_USBPHY0_BASE,
+               (struct mxs_register_32 *)(MXS_CLKCTRL_BASE +
+                       offsetof(struct mxs_clkctrl_regs,
+                       hw_clkctrl_pll0ctrl0_reg)),
+               CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
+               CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
+               HW_DIGCTL_CTRL_USB0_CLKGATE,
+       },
+#endif
+#ifdef CONFIG_EHCI_MXS_PORT1
+       {
+               MXS_USBCTRL1_BASE,
+               (struct mxs_usbphy_regs *)MXS_USBPHY1_BASE,
+               (struct mxs_register_32 *)(MXS_CLKCTRL_BASE +
+                       offsetof(struct mxs_clkctrl_regs,
+                       hw_clkctrl_pll1ctrl0_reg)),
+               CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
+               CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
+               HW_DIGCTL_CTRL_USB1_CLKGATE,
+       },
+#endif
+};
+
+static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable)
 {
-       uint32_t usb_base, phy_base;
-       switch (port) {
-       case 0:
-               usb_base = MXS_USBCTRL0_BASE;
-               phy_base = MXS_USBPHY0_BASE;
-               break;
-       case 1:
-               usb_base = MXS_USBCTRL1_BASE;
-               phy_base = MXS_USBPHY1_BASE;
-               break;
-       default:
-               printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port);
-               return -1;
+       struct mxs_register_32 *digctl_ctrl =
+               (struct mxs_register_32 *)HW_DIGCTL_CTRL;
+       int pll_offset, dig_offset;
+
+       if (enable) {
+               pll_offset = offsetof(struct mxs_register_32, reg_set);
+               dig_offset = offsetof(struct mxs_register_32, reg_clr);
+               writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset);
+               writel(port->pll_en_bits, (u32)port->pll + pll_offset);
+       } else {
+               pll_offset = offsetof(struct mxs_register_32, reg_clr);
+               dig_offset = offsetof(struct mxs_register_32, reg_set);
+               writel(port->pll_dis_bits, (u32)port->pll + pll_offset);
+               writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset);
        }
 
-       mxs_usb->usb_regs = (struct mxs_usb_regs *)usb_base;
-       mxs_usb->phy_regs = (struct mxs_usbphy_regs *)phy_base;
        return 0;
 }
 
-/* This DIGCTL register ungates clock to USB */
-#define        HW_DIGCTL_CTRL                  0x8001c000
-#define        HW_DIGCTL_CTRL_USB0_CLKGATE     (1 << 2)
-#define        HW_DIGCTL_CTRL_USB1_CLKGATE     (1 << 16)
-
 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
 
        int ret;
        uint32_t usb_base, cap_base;
-       struct mxs_register_32 *digctl_ctrl =
-               (struct mxs_register_32 *)HW_DIGCTL_CTRL;
-       struct mxs_clkctrl_regs *clkctrl_regs =
-               (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+       const struct ehci_mxs_port *port;
 
-       ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
-       if (ret)
-               return ret;
+       if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) {
+               printf("Invalid port index (index = %d)!\n", index);
+               return -EINVAL;
+       }
+
+       port = &mxs_port[index];
 
        /* Reset the PHY block */
-       writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+       writel(USBPHY_CTRL_SFTRST, &port->phy_regs->hw_usbphy_ctrl_set);
        udelay(10);
        writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE,
-               &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr);
+               &port->phy_regs->hw_usbphy_ctrl_clr);
 
        /* Enable USB clock */
-       writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
-                       &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
-       writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
-                       &clkctrl_regs->hw_clkctrl_pll1ctrl0_set);
-
-       writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
-               &digctl_ctrl->reg_clr);
+       ret = ehci_mxs_toggle_clock(port, 1);
+       if (ret)
+               return ret;
 
        /* Start USB PHY */
-       writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+       writel(0, &port->phy_regs->hw_usbphy_pwd);
 
        /* Enable UTMI+ Level 2 and Level 3 compatibility */
        writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1,
-               &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+               &port->phy_regs->hw_usbphy_ctrl_set);
 
-       usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100;
+       usb_base = port->usb_regs + 0x100;
        *hccr = (struct ehci_hccr *)usb_base;
 
        cap_base = ehci_readl(&(*hccr)->cr_capbase);
@@ -114,19 +134,19 @@ int ehci_hcd_stop(int index)
 {
        int ret;
        uint32_t usb_base, cap_base, tmp;
-       struct mxs_register_32 *digctl_ctrl =
-               (struct mxs_register_32 *)HW_DIGCTL_CTRL;
-       struct mxs_clkctrl_regs *clkctrl_regs =
-               (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
        struct ehci_hccr *hccr;
        struct ehci_hcor *hcor;
+       const struct ehci_mxs_port *port;
 
-       ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
-       if (ret)
-               return ret;
+       if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) {
+               printf("Invalid port index (index = %d)!\n", index);
+               return -EINVAL;
+       }
+
+       port = &mxs_port[index];
 
        /* Stop the USB port */
-       usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100;
+       usb_base = port->usb_regs + 0x100;
        hccr = (struct ehci_hccr *)usb_base;
        cap_base = ehci_readl(&hccr->cr_capbase);
        hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base));
@@ -140,17 +160,10 @@ int ehci_hcd_stop(int index)
                USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV |
                USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS |
                USBPHY_PWD_TXPWDFS;
-       writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+       writel(tmp, &port->phy_regs->hw_usbphy_pwd);
 
        /* Disable USB clock */
-       writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
-                       &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr);
-       writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
-                       &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr);
+       ret = ehci_mxs_toggle_clock(port, 0);
 
-       /* Gate off the USB clock */
-       writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
-               &digctl_ctrl->reg_set);
-
-       return 0;
+       return ret;
 }
index 73c66af06d5b54ecd53c0c0b2a8705a7d5f7819b..18c42413735b6447e4d3b75c51d13dafe20264af 100644 (file)
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT           1
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #endif
index 59a7be931d9e4fe022916ddcb3900f35f5a432b6..f2725cc87fb7086106609e2f4099f585bddd5250 100644 (file)
 #ifdef CONFIG_CMD_USB
 #define        CONFIG_USB_EHCI
 #define        CONFIG_USB_EHCI_MXS
-#define        CONFIG_EHCI_MXS_PORT            1
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define        CONFIG_EHCI_IS_TDI
 #define        CONFIG_USB_STORAGE
 #endif
index 6a46f3c08ae9978784143bca219dba326827a7b7..0d918a153d834f565076c5a367a7cecaefceec60 100644 (file)
 #ifdef CONFIG_CMD_USB
 #define        CONFIG_USB_EHCI
 #define        CONFIG_USB_EHCI_MXS
-#define        CONFIG_EHCI_MXS_PORT 1
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #define        CONFIG_EHCI_IS_TDI
 #define        CONFIG_USB_STORAGE
 #define        CONFIG_USB_HOST_ETHER
index decf8d9dec855aeef9408cc1905c0ed91be90bcb..349497f67a2c389dfb354b7a4b15e2894460e49f 100644 (file)
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT           0
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #endif