#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_DOS_PARTITION
-
#ifdef CONFIG_DDR_SPD
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#include <reiserfs.h>
#include <part.h>
-#ifndef CONFIG_DOS_PARTITION
+#if !CONFIG_IS_ENABLED(DOS_PARTITION)
#error DOS partition support must be selected
#endif
#include <usb.h>
#endif
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#if !CONFIG_IS_ENABLED(DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
#error DOS or EFI partition support must be selected
#endif
}
#endif
-#ifdef CONFIG_DOS_PARTITION
+#if CONFIG_IS_ENABLED(DOS_PARTITION)
if (strcmp(cmd, CONFIG_FASTBOOT_MBR_NAME) == 0) {
printf("%s: updating MBR\n", __func__);
if (is_valid_dos_buf(download_buffer)) {
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP152_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUNXI_NO_PMIC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DFU_RAM=y
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DFU_RAM=y
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP152_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP152_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO4_VOLT=2500
CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_SPANSION=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DFU_RAM=y
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP809_POWER=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DFU_RAM=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO3_VOLT=2500
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_AXP_FLDO1_VOLT=1200
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_KEYBOARD=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_KEYBOARD=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_KEYBOARD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUNXI_NO_PMIC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_AXP_ALDO1_VOLT=3300
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_AXP_ALDO1_VOLT=3300
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_AXP_ALDO1_VOLT=3300
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP809_POWER=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_ELDO2_VOLT=1800
CONFIG_USB_MUSB_GADGET=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_DFU=y
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DFU_RAM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_ALDO2_VOLT=1800
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DCDC5_VOLT=1200
CONFIG_AXP_DLDO3_VOLT=2500
CONFIG_AXP_SW_ON=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI is not set
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI is not set
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MMC_OMAP_HS=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MMC_OMAP_HS=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MMC_OMAP_HS=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MMC_OMAP_HS=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MMC_OMAP_HS=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MMC_OMAP_HS=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_NS16550=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_UBI=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO2_VOLT=1800
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TPM=y
+CONFIG_DOS_PARTITION=y
CONFIG_DM=y
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TPM=y
+CONFIG_DOS_PARTITION=y
CONFIG_DM=y
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_MISC=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_UBI=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DFU_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
CONFIG_LED_STATUS_RED=1
CONFIG_LED_STATUS_GREEN_ENABLE=y
CONFIG_LED_STATUS_GREEN=0
+# CONFIG_DOS_PARTITION is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_UBI=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DFU_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_OF_PLATDATA=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_SYS_NS16550=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_SYS_NS16550=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SNTP=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_UBI=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_UBI=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
# CONFIG_CMD_MISC is not set
+# CONFIG_DOS_PARTITION is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP152_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUNXI_NO_PMIC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_USE_PRIVATE_LIBGCC=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_TPM=y
CONFIG_CMD_TPM_TEST=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_ETH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_GADGET=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_NETDEVICES=y
CONFIG_RTL8139=y
CONFIG_PCI=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_AXP152_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_PCI=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_UBI=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DFU_NAND=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent"
CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
+CONFIG_DOS_PARTITION=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_OF_HOSTFILE=y
CONFIG_NETCONSOLE=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DFU_NAND=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DFU_NAND=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_UBI=y
+# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DFU_NAND=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=16
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI is not set
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_MAC_PARTITION=y
+CONFIG_DOS_PARTITION=y
# CONFIG_PCI_PNP is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
depends on SPL && PARTITIONS
default y if MAC_PARTITION
+config DOS_PARTITION
+ bool "Enable MS Dos partition table"
+ depends on PARTITIONS
+ default y if DISTRO_DEFAULTS
+ default y if x86 || SPARC || CMD_FAT || USB_STORAGE
+ help
+ traditional on the Intel architecture, USB sticks, etc.
+
+config SPL_DOS_PARTITION
+ bool "Enable MS Dos partition table for SPL"
+ depends on SPL && PARTITIONS
+ default y if DOS_PARTITION
+
endmenu
obj-$(CONFIG_PARTITIONS) += part.o
obj-$(CONFIG_$(SPL_)MAC_PARTITION) += part_mac.o
-obj-$(CONFIG_DOS_PARTITION) += part_dos.o
+obj-$(CONFIG_$(SPL_)DOS_PARTITION) += part_dos.o
obj-$(CONFIG_ISO_PARTITION) += part_iso.o
obj-$(CONFIG_AMIGA_PARTITION) += part_amiga.o
obj-$(CONFIG_EFI_PARTITION) += part_efi.o
static void print_part_header(const char *type, struct blk_desc *dev_desc)
{
#if CONFIG_IS_ENABLED(MAC_PARTITION) || \
- defined(CONFIG_DOS_PARTITION) || \
+ CONFIG_IS_ENABLED(DOS_PARTITION) || \
defined(CONFIG_ISO_PARTITION) || \
defined(CONFIG_AMIGA_PARTITION) || \
defined(CONFIG_EFI_PARTITION)
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_LONGHELP
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
#ifdef CONFIG_FMAN_ENET
*/
#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_IRQ
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_REGINFO
/*
#define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif
#define CONFIG_ENV_OVERWRITE
#endif /* CONFIG_TSEC_ENET */
#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Hash command with SHA acceleration supported in hardware */
#ifdef CONFIG_FSL_CAAM
#define CONFIG_CMD_HASH
#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif
#define CONFIG_TSEC_ENET
#define CONFIG_CMD_BSP
#define CONFIG_CMD_EEPROM
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_SUPPORT_VFAT
#undef CONFIG_WATCHDOG /* watchdog disabled */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000
#define CONFIG_SYS_USB_EHCI_CPU_INIT
#ifdef CONFIG_CMD_IDE
/* ATA */
-# define CONFIG_DOS_PARTITION
# define CONFIG_IDE_RESET 1
# define CONFIG_IDE_PREINIT 1
# define CONFIG_ATAPI
#define CONFIG_CMD_IDE
/* ATA */
-#define CONFIG_DOS_PARTITION
#define CONFIG_IDE_RESET 1
#define CONFIG_IDE_PREINIT 1
#define CONFIG_ATAPI
/* ATA configuration */
#define CONFIG_ISO_PARTITION
-#define CONFIG_DOS_PARTITION
#define CONFIG_IDE_RESET 1
#define CONFIG_IDE_PREINIT 1
#define CONFIG_ATAPI
# define CONFIG_CMD_PCI
# endif
# define CONFIG_PCI_OHCI
-# define CONFIG_DOS_PARTITION
# undef CONFIG_SYS_USB_OHCI_BOARD_INIT
# undef CONFIG_SYS_USB_OHCI_CPU_INIT
#endif
#ifdef CONFIG_CMD_USB
-# define CONFIG_DOS_PARTITION
# define CONFIG_USB_OHCI_NEW
# ifndef CONFIG_CMD_PCI
# define CONFIG_CMD_PCI
/************************************************************
* DISK Partition support
************************************************************/
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */
/************************************************************
#define CONFIG_SYS_FSL_ESDHC_USE_PIO
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/*
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
|| defined(CONFIG_USB_STORAGE)
- #define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_FSL_ESDHC_PIN_MUX
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/*
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_FSL_ESDHC_PIN_MUX
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/*
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#if defined(CONFIG_TSEC_ENET)
#endif
#endif
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
/*
* Miscellaneous configurable options
*/
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
#define CONFIG_FSL_ESDHC_PIN_MUX
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/*
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
-#define CONFIG_DOS_PARTITION
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif
#define CONFIG_TSEC_ENET
#endif /* #ifdef CONFIG_FSL_SATA */
#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
|| defined(CONFIG_FSL_SATA)
-#define CONFIG_DOS_PARTITION
#endif
/* Hash command with SHA acceleration supported in hardware */
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#endif
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_DOS_PARTITION
-#endif
-
#define CONFIG_TSEC_ENET
#ifdef CONFIG_TSEC_ENET
#ifdef CONFIG_USB_EHCI
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_FSL
-#define CONFIG_DOS_PARTITION
#endif
#endif
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Hash command with SHA acceleration supported in hardware */
/************************************************************
* DISK Partition support
************************************************************/
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */
/************************************************************
#define CONFIG_CMD_DATE
#define CONFIG_CMD_EEPROM
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_SUPPORT_VFAT
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define USB_2_0_DEVICE
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_CMD_BSP
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/*
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Qman/Bman */
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/*
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Qman/Bman */
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
#endif
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Qman/Bman */
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif
/* Qman/Bman */
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
#endif
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata LSZ ADD */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif
/* Qman/Bman */
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_ESDHC_DETECT_QUIRK \
(!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif
#endif /* #ifndef CONFIG_TQM5200S */
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/* USB */
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */
#define CONFIG_TIMESTAMP /* but print image timestmps */
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_DOS_PARTITION
-
#undef CONFIG_RTC_MPC8xx /* MPC885 does not support RTC */
#define CONFIG_TIMESTAMP /* but print image timestmps */
#define CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/*
#define CONFIG_GENERIC_MMC
#endif
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) || defined(CONFIG_FSL_SATA)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Misc Extra Settings */
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_EEPRO100
-/* Partitions */
-#define CONFIG_DOS_PARTITION
-
/* USB */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#endif
#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#endif /* defined(CONFIG_CMD_IDE) */
#define CONFIG_USB_OHCI
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
* SD (MMC) controller
*/
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FTSDC010
#define CONFIG_FTSDC010_NUMBER 1
#define CONFIG_FTSDC010_SDIO
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
/* USB Configs */
#define CONFIG_USB_EHCI
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_GENERIC_MMC 1
-#define CONFIG_DOS_PARTITION 1
/*
* USB configuration
/* SD/MMC */
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/*
* USB configuration
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
#define CONFIG_BAUDRATE 38400
#define CONFIG_BOOTARGS "console=ttySC2,38400"
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
*/
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
/*
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_DATE
#define CONFIG_CMD_NAND
#endif
#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#endif /* defined(CONFIG_CMD_IDE) */
#define CONFIG_USB_ATMEL 1
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_USB_HOST_BASE
#define CONFIG_GENERIC_ATMEL_MCI
#endif
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NO_FLASH 1
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
#ifdef CONFIG_AT91SAM9G10EK
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_GENERIC_ATMEL_MCI
#endif
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_GENERIC_ATMEL_MCI
#endif
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet */
#define CONFIG_KS8851_MLL
#define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_DOS_PARTITION
#endif
/* Ethernet - not present */
#define CONFIG_GENERIC_ATMEL_MCI
#endif
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_USART_BASE ATMEL_BASE_USART1
#define CONFIG_USART_ID 1
/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_USART_ID 1
/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_USART_ID 1
/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
* SD/MMC configuration
*/
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/*
* Ethernet PHY configuration
#define CONFIG_SUPPORT_VFAT
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*-----------------------------------------------------------------------
* This is necessary for the fatls command to work on an SD card
* for example.
*/
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/* version string, parser, etc */
* This is necessary for the fatls command to work on an SD card
* for example.
*/
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/* version string, parser, etc */
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/*
- * One partition type must be defined for part.c
- * This is necessary for the fatls command to work on an SD card
- * for example.
- */
-#define CONFIG_DOS_PARTITION
-
/* version string, parser, etc */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
/* #define CONFIG_STAMP_CF */
#if defined(CONFIG_STAMP_CF)
#define CONFIG_MISC_INIT_R
-#define CONFIG_DOS_PARTITION 1
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
#undef CONFIG_IDE_LED /* no led for ide supported */
#undef CONFIG_IDE_RESET /* no reset for ide supported */
#if defined(CONFIG_BFIN_IDE)
-#define CONFIG_DOS_PARTITION 1
/*
* IDE/ATA stuff
*/
# endif
# ifdef CONFIG_LIBATA
# define CONFIG_CMD_SATA
-# define CONFIG_DOS_PARTITION
# endif
# ifdef CONFIG_MMC
-# define CONFIG_DOS_PARTITION
# define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
# endif
# ifdef CONFIG_MMC_SPI
# endif
# ifdef CONFIG_USB
# define CONFIG_CMD_USB_STORAGE
-# define CONFIG_DOS_PARTITION
# endif
# if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
# define CONFIG_CMD_NAND
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
* enabled a number of useful commands and support.
*/
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
* enabled a number of useful commands and support.
*/
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#endif /* CONFIG_MMC, ... */
#endif
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*-----------------------------------------------------------------------
#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
/* Partition support */
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/* Additional FS support/configuration */
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00001000
/* Partitions (for USB) */
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_ISO_PARTITION 1
/*
115200}
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* USB */
#define CONFIG_USB_OMAP3
#define CONFIG_OMAP_GPIO
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* USB */
#define CONFIG_USB_MUSB_AM35X
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_HW_WATCHDOG
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_DOS_PARTITION
/*
* For booting Linux, the board info and command line data
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Hash command with SHA acceleration supported in hardware */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_ATMEL
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-#define CONFIG_DOS_PARTITION
/* USB DFU support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_NET_MULTI
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_GENERIC_MMC
#endif
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#endif
-
#ifndef CONFIG_DIRECT_NOR_BOOT
/* defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
/* Partition support */
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/* Additional FS support/configuration */
CONFIG_SYS_SCSI_MAX_LUN)
/* Partition support */
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/* Additional FS support/configuration */
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_DOS_PARTITION
/*
* Pass open firmware flat tree
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
-/*
- * Partitions
- */
-#define CONFIG_DOS_PARTITION
#define CONFIG_BZIP2
/*
"led0=103,1,0\0" \
"led1=64,0,1\0"
-#undef CONFIG_DOS_PARTITION
-
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
#endif
/* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
#define CONFIG_SYS_MVFS
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_ENV
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
-#define CONFIG_DOS_PARTITION
/* ED Mini V has an IDE-compatible SATA connector for port 1 */
#define CONFIG_MVSATA_IDE
#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
#define CONFIG_USB_EHCI_MARVELL
#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */
"led4=60,0,1\0" \
"led5=63,0,1\0"
-#undef CONFIG_DOS_PARTITION
#undef CONFIG_CMD_FAT
/* Physical Memory Map */
#define MTDIDS_DEFAULT "nand0=atmel_nand"
#define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)"
#endif
-#if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
- defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
#define CONFIG_LZO
#define CONFIG_RBTREE
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
/* USB Configs */
#ifdef CONFIG_USB
#define CONFIG_EHCI_IS_TDI
#endif /* CONFIG_CMD_USB */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FPGAD
#define CONFIG_CMD_IOLOOP
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
-#define CONFIG_DOS_PARTITION
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYSTEMACE /* Enable SystemACE support */
#define CONFIG_SYS_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */
#define CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_ACE_BASE
-#define CONFIG_DOS_PARTITION
/*
* External Bus Controller (EBC) Setup
* SD/MMC
*/
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/*
* GPIO
#define CONFIG_SYS_XLB_PIPELINING 1
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_CMD_SDRAM
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_EEPRO100 1
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-/* Partitions */
-#define CONFIG_DOS_PARTITION
-
/* USB */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */
#define CONFIG_SYS_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */
#define CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_ACE_BASE
-#define CONFIG_DOS_PARTITION 1
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
/* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */
#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_DOS_PARTITION
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "root=/dev/null console=ttySC4,115200"
/*
* Partition support
*/
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/*
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#endif
-
/* additions for new relocation code, must added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_GPT
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* SATA */
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_SATA AHCI_BASE_ADDR
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* SATA */
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_CMD_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_SATA AHCI_BASE_ADDR
CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_GPT
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_GPT
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_GPT
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* DSPI */
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_EFI_PARTITION
#ifndef CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT2
#endif
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
#define CONFIG_SYS_SCSI_MAX_LUN 2
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_EFI_PARTITION
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_SATA AHCI_BASE_ADDR
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Debug Server firmware */
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* Initial environment variables */
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
#define CONFIG_MISC_INIT_R
#define CONFIG_CMD_ENV
#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/*
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_CMD_BMP
/*
* U-Boot Commands
*/
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_CMD_BMP
/*
* U-Boot Commands
*/
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
/*
#define CONFIG_BOARD_EARLY_INIT_R
-/* Partitions */
-#define CONFIG_DOS_PARTITION
-
/*
* Command line configuration.
*/
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* EHCI */
#define CONFIG_OMAP3_GPIO_2
#undef CONFIG_CMD_FUSE
#undef CONFIG_CMD_IDE
#define CONFIG_CMD_JFFS2
-#define CONFIG_DOS_PARTITION
/*
* Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060
#define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET
#define CONFIG_SYS_ATA_STRIDE 4
-#define CONFIG_DOS_PARTITION
/*
* I2C configuration
#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
#define CONFIG_SYS_PIO_MODE 1
#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_MARUBUN_IO /* base address */
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
*/
#if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM)
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */
/* DISK Partition support */
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */
#define CONFIG_CMD_PART
/* DISK Partition support */
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */
#define CONFIG_CMD_PART
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define CONFIG_POWER_FSL_MC34704
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54
-#define CONFIG_DOS_PARTITION
-
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_DATE
#define CONFIG_CMD_NAND
#define CONFIG_NET_RETRY_COUNT 100
#define CONFIG_CMD_DATE
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_SYS_FSL_ESDHC_NUM 2
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/*
* Eth Configs
#define CONFIG_SYS_FSL_ESDHC_NUM 2
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* Eth Configs */
#define CONFIG_HAS_ETH1
#define CONFIG_GENERIC_MMC
/* bootz: zImage/initrd.img support */
-#define CONFIG_DOS_PARTITION
/* Eth Configs */
#define CONFIG_MII
#define CONFIG_SYS_FSL_ESDHC_NUM 2
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* Eth Configs */
#define CONFIG_MII
#define CONFIG_SYS_FSL_ESDHC_NUM 2
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* Eth Configs */
#define CONFIG_MII
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* Eth Configs */
#define CONFIG_HAS_ETH1
/* Filesystems and image support */
#define CONFIG_SUPPORT_RAW_INITRD
-#define CONFIG_DOS_PARTITION
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-/* Filesystems and image support */
-#define CONFIG_DOS_PARTITION
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
#define CONFIG_EHCI_IS_TDI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* USB */
#define CONFIG_USB_MUSB_UDC
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
-#define CONFIG_DOS_PARTITION
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /* CONFIG_CMD_IDE */
#define CONFIG_SYS_XLB_PIPELINING 1
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/* Partition tables */
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
/* USB
*
#define CONFIG_GENERIC_MMC
#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
#undef CONFIG_ENV_IS_IN_MMC
#endif
#define CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_GENERIC_MMC
#endif
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
- || defined(CONFIG_FSL_SATA)
-#define CONFIG_DOS_PARTITION
-#endif
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_GENERIC_MMC
#endif
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
- || defined(CONFIG_FSL_SATA)
-#define CONFIG_DOS_PARTITION
-#endif
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
/*---USB -------------------------------------------*/
#if 0
#define CONFIG_USB_OHCI
-#define CONFIG_DOS_PARTITION
#endif
/*---ATA PCMCIA ------------------------------------*/
#define CONFIG_SYS_ATA_STRIDE 4
#define CONFIG_ATAPI 1
-/* we enable IDE and FAT support, so we also need partition support */
-#define CONFIG_DOS_PARTITION 1
-
/* USB */
#define CONFIG_USB_OHCI
/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FEC_MXC
#define CONFIG_MII
* File System Configuration
*/
/* FAT FS */
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_FAT
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB Configs */
#define CONFIG_GENERIC_ATMEL_MCI
#endif
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_PXA_MMC_GENERIC
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_CONS_INDEX 1
#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
#ifdef CONFIG_SYS_BIG_ENDIAN
#define CONFIG_IDE_SWAP_IO
#define CONFIG_CONS_INDEX 1
#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
#ifdef CONFIG_SYS_BIG_ENDIAN
#define CONFIG_IDE_SWAP_IO
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
#define CONFIG_LBA48
-#define CONFIG_DOS_PARTITION
/*
* Environment
*/
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_SH_ZIMAGEBOOT
/* SCIF */
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_BAUDRATE 115200
"led4=60,0,1\0" \
"led5=63,0,1\0"
-#undef CONFIG_DOS_PARTITION
-
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
/* Support File sytems */
#define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
/* Support File sytems */
#define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
/* #define CONFIG_CMD_EXT2 EXT2 Support */
-#define CONFIG_DOS_PARTITION
#if 0
#define CONFIG_SAMSUNG_ONENAND 1
#define CONFIG_SYS_ONENAND_BASE 0xB0000000
-#define CONFIG_DOS_PARTITION 1
-
/* write support for filesystems */
#define CONFIG_FAT_WRITE
#define CONFIG_EXT4_WRITE
#if defined(CONFIG_CMD_USB)
#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
#endif
/* Ethernet Hardware */
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2 XPlained"
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* I2C */
#define AT24MAC_ADDR 0x5c
#define AT24MAC_REG 0x9a
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "SAMA5D3 Xplained"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_DOS_PARTITION
#endif
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
-#define CONFIG_DOS_PARTITION
#endif
/* USB device */
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet Hardware */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet Hardware */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_CMD_CBFS
#define CONFIG_CMD_CRAMFS
#define CONFIG_CMD_PART
-#define CONFIG_DOS_PARTITION
#define CONFIG_HOST_MAX_DEVICES 4
#define CONFIG_CMD_MD5SUM
#define CONFIG_CMD_GPT
#define CONFIG_PARTITION_UUIDS
#define CONFIG_AMIGA_PARTITION
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_ISO_PARTITION
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#undef CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#endif /* CONFIG_440EPX */
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_MD5SUM
#define CONFIG_MD5
-#define CONFIG_DOS_PARTITION
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_MD5SUM
#define CONFIG_MD5
-#define CONFIG_DOS_PARTITION
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_MD5SUM
#define CONFIG_MD5
-#define CONFIG_DOS_PARTITION
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SH_ZIMAGEBOOT
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp"
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
-#define CONFIG_DOS_PARTITION
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
#define CONFIG_SAMSUNG_ONENAND 1
#define CONFIG_SYS_ONENAND_BASE 0xE7100000
-#define CONFIG_DOS_PARTITION 1
-
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
/*
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_ATMEL
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-#define CONFIG_DOS_PARTITION
#define CONFIG_PARTITION_UUIDS
/* MMC */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
#include <asm/arch/base_addr_ac5.h>
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci"
#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
-#define CONFIG_DOS_PARTITION 1
#endif /* __CONFIG_H */
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
#endif /* CONFIG_PCI */
/* SATA */
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* EHCI */
#define CONFIG_OMAP3_GPIO_5
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* GPIO banks */
#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */
#endif
/* remove partitions/filesystems */
-#ifdef CONFIG_DOS_PARTITION
-#undef CONFIG_DOS_PARTITION
-#endif
#ifdef CONFIG_EFI_PARTITION
#undef CONFIG_EFI_PARTITION
#endif
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT
"led0=103,1,0\0" \
"led1=64,0,1\0"
-#undef CONFIG_DOS_PARTITION
-
/* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
#define CONFIG_OMAP_GPIO
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/**
* Physical Memory Map
#define CONFIG_CMD_ASKEN
#define CONFIG_OMAP_GPIO
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FS_FAT
* enabled a number of useful commands and support.
*/
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_EHCI_DESC_BIG_ENDIAN
#define CONFIG_EHCI_IS_TDI
-#define CONFIG_DOS_PARTITION
-
/*
* Diagnostics
*/
/* MMC */
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/* I2C */
#define CONFIG_SYS_I2C
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH /* No NOR Flash */
-#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
/*
* Eth Configs
/* USB */
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
#define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
/* SD/MMC */
#define CONFIG_SUPPORT_EMMC_BOOT
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
* PCI - no support
*/
-/*
- * Partitions
- */
-#define CONFIG_DOS_PARTITION 1
-
/*
* USB
*/
#endif
#if defined(CONFIG_CMD_USB)
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#define CONFIG_SUPPORT_VFAT
/*#define CONFIG_MENU_SHOW*/
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_ENV
-#define CONFIG_DOS_PARTITION
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "L+G VInCo"
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
/* Ethernet Hardware */
#define CONFIG_PHY_SMSC
#define CONFIG_MACB
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_EMMC_RPMB
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC4 eMMC */
/* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */
#define CONFIG_CMD_NAND
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_MXC_GPIO
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_DOS_PARTITION
/*
* No NOR
/* Filesystem support (for USB key) */
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_DOS_PARTITION
/*
* DISK Partition support
************************************************************/
#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */
#define CONFIG_CMD_PART
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
/* Command line configuration */
#define CONFIG_CMD_ENV
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#ifndef CONFIG_SPL_BUILD
# define CONFIG_ISO_PARTITION
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_DOS_PARTITION
/*
* Command configuration.
#define CONFIG_PHY1_ADDR 3
/* Partitions */
-#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#ifdef CONFIG_440EP
#define CONFIG_GENERIC_MMC
#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
-#define CONFIG_DOS_PARTITION
#endif
/*
#define CONFIG_MXC_USB_PORTSC MXC_EHCI_MODE_SERIAL
#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
#define CONFIG_EHCI_IS_TDI
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */
#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
# define CONFIG_SUPPORT_VFAT
# define CONFIG_FAT_WRITE
-# define CONFIG_DOS_PARTITION
#endif
#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
gpt_header *gpt_head, gpt_entry **gpt_pte);
#endif
-#ifdef CONFIG_DOS_PARTITION
+#if CONFIG_IS_ENABLED(DOS_PARTITION)
/**
* is_valid_dos_buf() - Ensure that a DOS MBR image is valid
*
CONFIG_DMC_DDRTR2
CONFIG_DNET_AUTONEG_TIMEOUT
CONFIG_DNP5370_EXT_WD_DISABLE
-CONFIG_DOS_PARTITION
CONFIG_DP_DDR_CTRL
CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR
CONFIG_DP_DDR_NUM_CTRLS