This requires that cpu_is_exynos4/5 should be made available before tzpc_init.
Hence this patch also makes necessary changes to have cpu_info in spl and
invokes arch_cpu_init before tzpc_init in low_level_init.S for smdk5250.
Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* MA 02111-1307 USA
*/
+#include <common.h>
#include <asm/arch/tzpc.h>
#include <asm/io.h>
void tzpc_init(void)
{
struct exynos_tzpc *tzpc;
- unsigned int addr;
+ unsigned int addr, start = 0, end = 0;
- for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+ start = samsung_get_base_tzpc();
+
+ if (cpu_is_exynos5())
+ end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+ else if (cpu_is_exynos4())
+ end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+
+ for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) {
tzpc = (struct exynos_tzpc *)addr;
- if (addr == TZPC0_BASE)
+ if (addr == start)
writel(R0SIZE, &tzpc->r0size);
writel(DECPROTXSET, &tzpc->decprot0set);
writel(DECPROTXSET, &tzpc->decprot1set);
- if (addr != TZPC9_BASE) {
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
- }
+ if (cpu_is_exynos5() && (addr == end))
+ break;
+
+ writel(DECPROTXSET, &tzpc->decprot2set);
+ writel(DECPROTXSET, &tzpc->decprot3set);
}
}
LIB = $(obj)libs5p-common.o
COBJS-y += cpu_info.o
+ifndef CONFIG_SPL_BUILD
COBJS-y += timer.o
COBJS-y += sromc.o
COBJS-$(CONFIG_PWM) += pwm.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
#define EXYNOS4_CLOCK_BASE 0x10030000
#define EXYNOS4_SYSTIMER_BASE 0x10050000
#define EXYNOS4_WATCHDOG_BASE 0x10060000
+#define EXYNOS4_TZPC_BASE 0x10110000
#define EXYNOS4_MIU_BASE 0x10600000
#define EXYNOS4_DMC0_BASE 0x10400000
#define EXYNOS4_DMC1_BASE 0x10410000
#define EXYNOS4X12_CLOCK_BASE 0x10030000
#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
+#define EXYNOS4X12_TZPC_BASE 0x10110000
#define EXYNOS4X12_DMC0_BASE 0x10600000
#define EXYNOS4X12_DMC1_BASE 0x10610000
#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
#define EXYNOS5_POWER_BASE 0x10040000
#define EXYNOS5_SWRESET 0x10040400
#define EXYNOS5_SYSREG_BASE 0x10050000
+#define EXYNOS5_TZPC_BASE 0x10100000
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
#define EXYNOS5_DMC_PHY0_BASE 0x10C00000
SAMSUNG_BASE(power, POWER_BASE)
SAMSUNG_BASE(spi, SPI_BASE)
SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
+SAMSUNG_BASE(tzpc, TZPC_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */
unsigned int pcellid3;
};
-/* TZPC : Register Offsets */
-#define TZPC0_BASE 0x10100000
-#define TZPC1_BASE 0x10110000
-#define TZPC2_BASE 0x10120000
-#define TZPC3_BASE 0x10130000
-#define TZPC4_BASE 0x10140000
-#define TZPC5_BASE 0x10150000
-#define TZPC6_BASE 0x10160000
-#define TZPC7_BASE 0x10170000
-#define TZPC8_BASE 0x10180000
-#define TZPC9_BASE 0x10190000
+#define EXYNOS4_NR_TZPC_BANKS 6
+#define EXYNOS5_NR_TZPC_BANKS 10
+/* TZPC : Register Offsets */
#define TZPC_BASE_OFFSET 0x10000
/*
bl mem_ctrl_init
1:
+ bl arch_cpu_init
bl tzpc_init
ldmia r13!, {ip,pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_init
+ bl arch_cpu_init
bl tzpc_init
exit_wakeup:
LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
+ifeq ($(SOC),exynos)
+LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
+endif
+
# Add GCC lib
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o