arm64: mvebu: use single defconfig for Armada8K development boards

Currently, Marvell Armada8k development board use 3 different
defconfigs:
        mvebu_db-88f7040-nand_defconfig
        mvebu_db-88f7040_defconfig
        mvebu_db-88f8040_defconfig
Having 3 different defconfigs makes maintenance difficult.

This patch removes the defconfigs mentioned above and introduce
a new defconfig which represents the Armada8k family.

NOTE:
In order not to break automatic tools compilation,
a default device-tree is set in the defconfig (armada-8040-db).
However, when compiling u-boot, the user MUST explicitly export
the DEVICE_TREE for the requested board because using A80x0
device-tree on A70x0 might break the device.

For more information, refer to "doc/README.marvell" (intoduced
in this patch).

Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/configs/mvebu_db-88f7040-nand_defconfig b/configs/mvebu_db-88f7040-nand_defconfig
deleted file mode 100644 (file)
index 2aba8de..0000000
--- a/configs/mvebu_db-88f7040-nand_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_MVEBU_ARMADA_8K=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db-nand"
-CONFIG_SMBIOS_PRODUCT_NAME=""
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_EARLY_INIT_R=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_MVEBU_BUBT=y
-CONFIG_MVEBU_NAND_BOOT=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MAC_PARTITION=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_BLOCK_CACHE=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_NAND_PXA3XX=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_PCIE_DW_MVEBU=y
-CONFIG_MVEBU_COMPHY_SUPPORT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_8K=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_DEBUG_UART_BASE=0xf0512000
-CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_SMBIOS_MANUFACTURER=""

diff --git a/configs/mvebu_db-88f7040_defconfig b/configs/mvebu_db-88f7040_defconfig
deleted file mode 100644 (file)
index 28af643..0000000
--- a/configs/mvebu_db-88f7040_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_MVEBU_ARMADA_8K=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db"
-CONFIG_SMBIOS_PRODUCT_NAME=""
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_EARLY_INIT_R=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_MVEBU_BUBT=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MAC_PARTITION=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_BLOCK_CACHE=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_MVPP2=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_PCIE_DW_MVEBU=y
-CONFIG_MVEBU_COMPHY_SUPPORT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_8K=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_DEBUG_UART_BASE=0xf0512000
-CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_SMBIOS_MANUFACTURER=""

diff --git a/configs/mvebu_db-88f8040_defconfig b/configs/mvebu_db-88f8040_defconfig
deleted file mode 100644 (file)
index 7f36eda..0000000
--- a/configs/mvebu_db-88f8040_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_MVEBU_ARMADA_8K=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-8040-db"
-CONFIG_SMBIOS_PRODUCT_NAME=""
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_EARLY_INIT_R=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_MVEBU_BUBT=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MAC_PARTITION=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_BLOCK_CACHE=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_MVPP2=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_PCIE_DW_MVEBU=y
-CONFIG_MVEBU_COMPHY_SUPPORT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_8K=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_DEBUG_UART_BASE=0xf0512000
-CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_SMBIOS_MANUFACTURER=""

diff --git a/configs/mvebu_db_armada8k_defconfig b/configs/mvebu_db_armada8k_defconfig
new file mode 100644 (file)
index 0000000..7f36eda
--- /dev/null
+++ b/configs/mvebu_db_armada8k_defconfig
@@ -0,0 +1,70 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_MVEBU_ARMADA_8K=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-8040-db"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_CACHE=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MARVELL=y
+CONFIG_MVPP2=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_DW_MVEBU=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DEBUG_UART_BASE=0xf0512000
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_SMBIOS_MANUFACTURER=""

diff --git a/doc/README.marvell b/doc/README.marvell
new file mode 100644 (file)
index 0000000..3364617
--- /dev/null
+++ b/doc/README.marvell
@@ -0,0 +1,53 @@
+Marvell U-Boot Build Instructions
+=================================
+
+This document describes how to compile the U-Boot and how to change U-Boot configuration
+
+Build Procedure
+----------------
+1. Install required packages:
+
+               # sudo apt-get install libssl-dev
+               # sudo apt-get install device-tree-compiler
+               # sudo apt-get install swig libpython-dev
+
+2. Set the cross compiler:
+
+               # export CROSS_COMPILE=/path/to/toolchain/aarch64-marvell-linux-gnu-
+
+3. Clean-up old residuals:
+
+               # make mrproper
+
+4. Configure the U-Boot:
+
+               # make <defconfig_file>
+
+       - For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
+       - For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
+       - For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
+       - For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+
+5. Configure the device-tree and build the U-Boot image:
+
+       Compile u-boot and set the required device-tree using:
+
+               # make DEVICE_TREE=<name>
+
+       NOTE:
+       Compilation with "mvebu_db_armada8k_defconfig" requires explicitly exporting DEVICE_TREE
+       for the requested board.
+       By default, u-boot is compiled with armada-8040-db device-tree.
+        Using A80x0 device-tree on A70x0 might break the device.
+        In order to prevent this, the required device-tree MUST be set during compilation.
+        All device-tree files are located in ./arch/arm/dts/ folder.
+
+       NOTE:
+       The u-boot.bin should not be used as a stand-alone image.
+       The ARM Trusted Firmware (ATF) build process uses this image to generate the
+       flash image.
+
+Configuration update
+---------------------
+       To update the U-Boot configuration, please refer to doc/README.kconfig
+