Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
 
          This option is enabled by default for U-Boot.
 
+config SYS_MALLOC_F
+       bool "Enable malloc() pool before relocation"
+       default 0x400
+       help
+         Before relocation memory is very limited on many platforms. Still,
+         we can provide a small malloc() pool if needed. Driver model in
+         particular needs this to operate, so that it can allocate the
+         initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+       hex "Size of malloc() pool before relocation"
+       depends on SYS_MALLOC_F
+       default 0x400
+       help
+         Before relocation memory is very limited on many platforms. Still,
+         we can provide a small malloc() pool if needed. Driver model in
+         particular needs this to operate, so that it can allocate the
+         initial serial device and any others that are needed.
+
 menuconfig EXPERT
         bool "Configure standard U-Boot features (expert users)"
         help
 
 config DM_GPIO
        default y if !SPL_BUILD
 
+config SYS_MALLOC_F
+       default y if !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+       default 0x400 if !SPL_BUILD
+
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"
 
 config DM_SERIAL
        default y if DM && !SPL_BUILD
 
+config SYS_MALLOC_F
+       default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+       default 0x400 if DM && !SPL_BUILD
+
 config SYS_SOC
        default "omap3"
 
 
 
 endchoice
 
+config SYS_MALLOC_F
+       default y
+
+config SYS_MALLOC_F_LEN
+       default 0x1800
+
 config USE_PRIVATE_LIBGCC
        default y if SPL_BUILD
 
 
 
 endchoice
 
+config SYS_MALLOC_F
+       default y
+
+config SYS_MALLOC_F_LEN
+       default 0x2000
+
 config CMD_PINMON
        bool "Enable boot mode pins monitor command"
        default y
 
 config DM_SERIAL
        default y
 
+config SYS_MALLOC_F
+       default y
+
+config SYS_MALLOC_F_LEN
+       default 0x800
+
 config RAMBASE
        hex
        default 0x100000
 
 config DM_SERIAL
        default y if DM && !SPL_BUILD
 
+config SYS_MALLOC_F
+       default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+       default 0x400 if DM && !SPL_BUILD
+
 endif
 
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=122
 +S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_DM=n
 CONFIG_DM_SERIAL=n
 CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PEPPER=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_ARM=y
 CONFIG_TARGET_RPI=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_TARGET_S5P_GONI=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_FIT_SIGNATURE=y
 CONFIG_DM=y
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_TARGET_SMDKC100=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 
 CONFIG_SYS_EXTRA_OPTIONS="stv0991"
 CONFIG_ARM=y
 CONFIG_TARGET_STV0991=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 
 #define CONFIG_MACH_TYPE               4273
 
 #ifndef CONFIG_SPL_BUILD
-
 #define CONFIG_CMD_GPIO
-
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 #endif
 
 /* Display information on boot */
 
 #define CONFIG_ENV_OVERWRITE
 
 /* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 << 20))
 
 /* select serial console configuration */
 
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 
 /* Init Functions */
 #define CONFIG_BOARD_EARLY_INIT_F
 
 
 #define CONFIG_DM
 #define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN        (1 << 10)
 #define CONFIG_IMX6_THERMAL
 
 #define CONFIG_SYS_GENERIC_BOARD
 
 
 #define CONFIG_DM
 #define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN        (1 << 10)
 #define CONFIG_IMX6_THERMAL
 
 #define CONFIG_CMD_FUSE
 
 #define CONFIG_UBI_SIZE                        (512 << 10)
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
                                        (128 << 10))
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 
 /*
  * Hardware drivers
 
 #define CONFIG_SYS_MEMTEST_END         0x20000000
 
 #define CONFIG_SYS_MALLOC_LEN          (64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 
 /* SPL */
 #define CONFIG_SPL_FAT_SUPPORT
 
                                         CONFIG_SYS_SDRAM_SIZE - \
                                         GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_MALLOC_LEN          SZ_4M
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 #define CONFIG_SYS_MEMTEST_START       0x00100000
 #define CONFIG_SYS_MEMTEST_END         0x00200000
 #define CONFIG_LOADADDR                        0x00200000
 
 #define CONFIG_CMDLINE_EDITING
 
 /* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 << 20))
 
 /*
 
 /*
  * Size of malloc() pool, before and after relocation
  */
-#define CONFIG_SYS_MALLOC_F_LEN        (1 << 10)
 #define CONFIG_MALLOC_F_ADDR           0x0010000
 #define CONFIG_SYS_MALLOC_LEN          (32 << 20)      /* 32MB  */
 
 
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (1 << 20))
 
-/* Small malloc pool before relocation */
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
-
 /*
  * select serial console configuration
  */
 
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
 
        (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MAXARGS                     16
 #define CONFIG_SYS_MALLOC_LEN                  (CONFIG_ENV_SIZE + 16 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN                        0x2000
 
 #define CONFIG_DM
 /* serial port (PL011) configuration */
 
 
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
 # define CONFIG_DW_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN       (1 << 10)
 #endif
 
 /*
 
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          (4 << 20)       /* 4MB  */
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
 
 #define CONFIG_SYS_NONCACHED_MEMORY    (1 << 20)       /* 1 MiB */
 
 
 
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN       (1 << 10)
 #endif
 
 #include <asm/arch/omap.h>
 
 
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN       (1 << 10)
 #endif
 
 /* The chip has SDRC controller */
 
 #define CONFIG_SMC911X_BASE            CONFIG_SUPPORT_CARD_ETHER_BASE
 #define CONFIG_SMC911X_32_BIT
 
-#define CONFIG_SYS_MALLOC_F_LEN  0x2000
-
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/
 
 #define CONFIG_SYS_STACK_SIZE                  (32 * 1024)
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN                  0x200000
-#define CONFIG_SYS_MALLOC_F_LEN                        (2 << 10)
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE