Changes since U-Boot 1.0.1:
======================================================================
+* Patch by Travis Sawyer, 30 Dec 2003:
+ Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
+ select MDI port based on enabled EMAC device.
+ Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
+ base PrPMC board.
+
* Patch by Wolter Kamphuis, 15 Dec 2003:
made CONFIG_SILENT_CONSOLE usable on all architectures
E: caret@c-side.com
D: Author of LiMon-1.4.2, which contributed some ideas
+N: Travis B. Sawyer
+E: travis.sawyer@sandburst.com
+D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.
+
N: Paolo Scaffardi
E: arsenio@tin.it
D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
ML2 OCRTC ORSG PCI405 \
PIP405 PLU405 PMC405 PPChameleonEVB \
VOH405 W7OLMC W7OLMG WALNUT405 \
+ XPEDITE1K \
"
#########################################################################
WALNUT405_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+XPEDITE1K_config:unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
+
#########################################################################
## MPC824x Systems
#########################################################################
- cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs
- cpu/arm925t Files specific to ARM 925 CPUs
-- cpu/arm926ejs Files specific to ARM 926 CPUs
+- cpu/arm926ejs Files specific to ARM 926 CPUs
- cpu/mpc5xx Files specific to Motorola MPC5xx CPUs
- cpu/mpc8xx Files specific to Motorola MPC8xx CPUs
- cpu/mpc824x Files specific to Motorola MPC824x CPUs
- cpu/ppc4xx Files specific to IBM 4xx CPUs
-- board/LEOX/ Files specific to boards manufactured by The LEOX team
+- board/LEOX/ Files specific to boards manufactured by The LEOX team
- board/LEOX/elpt860 Files specific to ELPT860 boards
- board/RPXClassic
Files specific to RPXClassic boards
-- board/RPXlite Files specific to RPXlite boards
+- board/RPXlite Files specific to RPXlite boards
- board/at91rm9200dk Files specific to AT91RM9200DK boards
- board/c2mon Files specific to c2mon boards
-- board/cmi Files specific to cmi boards
+- board/cmi Files specific to cmi boards
- board/cogent Files specific to Cogent boards
(need further configuration)
Files specific to CPCIISER4 boards
-- board/cpu86 Files specific to CPU86 boards
+- board/cpu86 Files specific to CPU86 boards
- board/cray/ Files specific to boards manufactured by Cray
-- board/cray/L1 Files specific to L1 boards
+- board/cray/L1 Files specific to L1 boards
- board/cu824 Files specific to CU824 boards
-- board/ebony Files specific to IBM Ebony board
+- board/ebony Files specific to IBM Ebony board
- board/eric Files specific to ERIC boards
- board/esd/ Files specific to boards manufactured by ESD
- board/esd/adciop Files specific to ADCIOP boards
- board/esd/cpciiser4 Files specific to CPCIISER4 boards
- board/esd/common Common files for ESD boards
- board/esd/dasa_sim Files specific to DASA_SIM boards
-- board/esd/du405 Files specific to DU405 boards
-- board/esd/ocrtc Files specific to OCRTC boards
+- board/esd/du405 Files specific to DU405 boards
+- board/esd/ocrtc Files specific to OCRTC boards
- board/esd/pci405 Files specific to PCI405 boards
- board/esteem192e
Files specific to ESTEEM192E boards
- board/mpl/common Common files for MPL boards
- board/mpl/pip405 Files specific to PIP405 boards
- board/mpl/mip405 Files specific to MIP405 boards
-- board/mpl/vcma9 Files specific to VCMA9 boards
-- board/musenki Files specific to MUSEKNI boards
-- board/mvs1 Files specific to MVS1 boards
-- board/nx823 Files specific to NX823 boards
-- board/oxc Files specific to OXC boards
+- board/mpl/vcma9 Files specific to VCMA9 boards
+- board/musenki Files specific to MUSEKNI boards
+- board/mvs1 Files specific to MVS1 boards
+- board/nx823 Files specific to NX823 boards
+- board/oxc Files specific to OXC boards
- board/omap1510inn
Files specific to OMAP 1510 Innovator boards
- board/omap1610inn
Files specific to OMAP 1610 Innovator boards
-- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards
-- board/pm826 Files specific to PM826 boards
+- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards
+- board/pm826 Files specific to PM826 boards
- board/ppmc8260
Files specific to PPMC8260 boards
- board/snmc/qs850 Files specific to QS850/823 boards
Files specific to RSDproto boards
- board/sandpoint
Files specific to Sandpoint boards
-- board/sbc8260 Files specific to SBC8260 boards
+- board/sbc8260 Files specific to SBC8260 boards
- board/sacsng Files specific to SACSng boards
- board/siemens Files specific to boards manufactured by Siemens AG
- board/siemens/CCM Files specific to CCM boards
- board/siemens/IAD210 Files specific to IAD210 boards
-- board/siemens/SCM Files specific to SCM boards
+- board/siemens/SCM Files specific to SCM boards
- board/siemens/pcu_e Files specific to PCU_E boards
- board/sixnet Files specific to SIXNET boards
- board/spd8xx Files specific to SPD8xxTS boards
- board/tqm8260 Files specific to TQM8260 boards
- board/tqm8xx Files specific to TQM8xxL boards
-- board/w7o Files specific to W7O boards
+- board/w7o Files specific to W7O boards
- board/walnut405
Files specific to Walnut405 boards
-- board/westel/ Files specific to boards manufactured by Westel Wireless
+- board/westel/ Files specific to boards manufactured by Westel Wireless
- board/westel/amx860 Files specific to AMX860 boards
-- board/utx8245 Files specific to UTX8245 boards
-- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board
+- board/utx8245 Files specific to UTX8245 boards
+- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board
Software Configuration:
=======================
PowerPC based boards:
---------------------
- CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper,
- CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850,
- CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS,
- CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T,
- CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240,
- CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245,
- CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L,
- CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L,
+ CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper,
+ CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850,
+ CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS,
+ CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T,
+ CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240,
+ CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245,
+ CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L,
+ CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L,
CONFIG_CPCI4052, CONFIG_IVMS8_256, CONFIG_TQM855L,
CONFIG_CPCIISER4, CONFIG_LANTEC, CONFIG_TQM860L,
- CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260,
- CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech,
- CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245,
+ CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260,
+ CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech,
+ CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245,
CONFIG_DASA_SIM, CONFIG_MIP405, CONFIG_W7OLMC,
- CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG,
- CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405,
- CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA,
- CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon,
- CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260,
+ CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG,
+ CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405,
+ CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA,
+ CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon,
+ CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260,
CONFIG_EVB64260, CONFIG_OCRTC, CONFIG_cogent_mpc8xx,
- CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260,
- CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260,
+ CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260,
+ CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260,
CONFIG_FADS860T, CONFIG_PCI405, CONFIG_hermes,
- CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod,
- CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon,
- CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e,
- CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260,
- CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto,
- CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
- CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L,
- CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI,
- CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900,
+ CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod,
+ CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon,
+ CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e,
+ CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260,
+ CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto,
+ CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
+ CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L,
+ CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI,
+ CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900,
CONFIG_MPC8540ADS, CONFIG_MPC8560ADS, CONFIG_QS850,
- CONFIG_QS823, CONFIG_QS860T, CONFIG_DB64360,
+ CONFIG_QS823, CONFIG_QS860T, CONFIG_DB64360,
CONFIG_DB64460, CONFIG_DUET_ADS
ARM based boards:
-----------------
CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312,
- CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
+ CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610
- CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
+ CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
CONFIG_TRAB, CONFIG_VCMA9, CONFIG_AT91RM9200DK
CFG_MEASURE_CPUCLK
- Define this to measure the actual CPU clock instead
- of relying on the correctness of the configured
- values. Mostly useful for board bringup to make sure
- the PLL is locked at the intended frequency. Note
- that this requires a (stable) reference clock (32 kHz
- RTC clock),
+ Define this to measure the actual CPU clock instead
+ of relying on the correctness of the configured
+ values. Mostly useful for board bringup to make sure
+ the PLL is locked at the intended frequency. Note
+ that this requires a (stable) reference clock (32 kHz
+ RTC clock),
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
bit-blit (cf. smiLynxEM)
VIDEO_VISIBLE_COLS visible pixel columns
(cols=pitch)
- VIDEO_VISIBLE_ROWS visible pixel rows
- VIDEO_PIXEL_SIZE bytes per pixel
+ VIDEO_VISIBLE_ROWS visible pixel rows
+ VIDEO_PIXEL_SIZE bytes per pixel
VIDEO_DATA_FORMAT graphic data format
(0-5, cf. cfb_console.c)
- VIDEO_FB_ADRS framebuffer address
+ VIDEO_FB_ADRS framebuffer address
VIDEO_KBD_INIT_FCT keyboard int fct
(i.e. i8042_kbd_init())
VIDEO_TSTC_FCT test char fct
CFG_CMD_AUTOSCRIPT Autoscript Support
CFG_CMD_BDI bdinfo
CFG_CMD_BEDBUG Include BedBug Debugger
- CFG_CMD_BMP * BMP support
+ CFG_CMD_BMP * BMP support
CFG_CMD_BOOTD bootd
CFG_CMD_CACHE icache, dcache
CFG_CMD_CONSOLE coninfo
CFG_CMD_DATE * support for RTC, date/time...
CFG_CMD_DHCP DHCP support
- CFG_CMD_DIAG * Diagnostics
- CFG_CMD_DOC * Disk-On-Chip Support
- CFG_CMD_DTT Digital Therm and Thermostat
+ CFG_CMD_DIAG * Diagnostics
+ CFG_CMD_DOC * Disk-On-Chip Support
+ CFG_CMD_DTT Digital Therm and Thermostat
CFG_CMD_ECHO * echo arguments
CFG_CMD_EEPROM * EEPROM read/write support
CFG_CMD_ELF bootelf, bootvx
CFG_CMD_FDOS * Dos diskette Support
CFG_CMD_FLASH flinfo, erase, protect
CFG_CMD_FPGA FPGA device initialization support
- CFG_CMD_HWFLOW * RTS/CTS hw flow control
+ CFG_CMD_HWFLOW * RTS/CTS hw flow control
CFG_CMD_I2C * I2C serial bus support
CFG_CMD_IDE * IDE harddisk support
CFG_CMD_IMI iminfo
- CFG_CMD_IMLS List all found images
+ CFG_CMD_IMLS List all found images
CFG_CMD_IMMAP * IMMR dump support
CFG_CMD_IRQ * irqinfo
- CFG_CMD_JFFS2 * JFFS2 Support
+ CFG_CMD_JFFS2 * JFFS2 Support
CFG_CMD_KGDB * kgdb
CFG_CMD_LOADB loadb
CFG_CMD_LOADS loads
CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
loop, mtest
- CFG_CMD_MISC Misc functions like sleep etc
+ CFG_CMD_MISC Misc functions like sleep etc
CFG_CMD_MMC MMC memory mapped support
CFG_CMD_MII MII utility commands
- CFG_CMD_NAND * NAND support
+ CFG_CMD_NAND * NAND support
CFG_CMD_NET bootp, tftpboot, rarpboot
CFG_CMD_PCI * pciinfo
CFG_CMD_PCMCIA * PCMCIA support
- CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
- CFG_CMD_PORTIO * Port I/O
+ CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
+ CFG_CMD_PORTIO * Port I/O
CFG_CMD_REGINFO * Register dump
CFG_CMD_RUN run command in env variable
- CFG_CMD_SAVES save S record dump
+ CFG_CMD_SAVES save S record dump
CFG_CMD_SCSI * SCSI Support
- CFG_CMD_SDRAM * print SDRAM configuration information
+ CFG_CMD_SDRAM * print SDRAM configuration information
CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
CFG_CMD_SPI * SPI serial bus support
CFG_CMD_USB * USB support
- CFG_CMD_VFD * VFD support (TRAB)
+ CFG_CMD_VFD * VFD support (TRAB)
CFG_CMD_BSP * Board SPecific functions
-----------------------------------------------
CFG_CMD_ALL all
Following modes are supported (* is default):
800x600 1024x768 1280x1024
- 256 (8bit) 303* 305 307
- 65536 (16bit) 314 317 31a
- 16,7 Mill (24bit) 315 318 31b
+ 256 (8bit) 303* 305 307
+ 65536 (16bit) 314 317 31a
+ 16,7 Mill (24bit) 315 318 31b
(i.e. setenv videomode 317; saveenv; reset;)
CONFIG_VIDEO_SED13806
clock chips. See common/cmd_i2c.c for a description of the
command line interface.
- CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
+ CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
CONFIG_SOFT_I2C configures u-boot to use a software (aka
bit-banging) driver instead of CPM or similar hardware
(Optional). Any commands necessary to enable the I2C
controller or configure ports.
- eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+ eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
I2C_PORT
eg: #define I2C_SDA(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
I2C_SCL(bit)
eg: #define I2C_SCL(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
I2C_DELAY
Time to wait after FPGA configuration. The default is
200 mS.
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA_COUNT
Specify the number of FPGA devices to support.
Arg Where When
1 common/cmd_bootm.c before attempting to boot an image
- -1 common/cmd_bootm.c Image header has bad magic number
+ -1 common/cmd_bootm.c Image header has bad magic number
2 common/cmd_bootm.c Image header has correct magic number
- -2 common/cmd_bootm.c Image header has bad checksum
+ -2 common/cmd_bootm.c Image header has bad checksum
3 common/cmd_bootm.c Image header has correct checksum
- -3 common/cmd_bootm.c Image data has bad checksum
+ -3 common/cmd_bootm.c Image data has bad checksum
4 common/cmd_bootm.c Image data has correct checksum
-4 common/cmd_bootm.c Image is for unsupported architecture
5 common/cmd_bootm.c Architecture check OK
8 common/cmd_bootm.c Image Type check OK
-9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
9 common/cmd_bootm.c Start initial ramdisk verification
- -10 common/cmd_bootm.c Ramdisk header has bad magic number
- -11 common/cmd_bootm.c Ramdisk header has bad checksum
+ -10 common/cmd_bootm.c Ramdisk header has bad magic number
+ -11 common/cmd_bootm.c Ramdisk header has bad checksum
10 common/cmd_bootm.c Ramdisk header is OK
- -12 common/cmd_bootm.c Ramdisk data has bad checksum
+ -12 common/cmd_bootm.c Ramdisk data has bad checksum
11 common/cmd_bootm.c Ramdisk data has correct checksum
12 common/cmd_bootm.c Ramdisk verification complete, start loading
-13 common/cmd_bootm.c Wrong Image Type (not PPC Linux Ramdisk)
-1 common/cmd_nand.c Read Error on boot device
-1 common/cmd_nand.c Image header has bad magic number
- -1 common/env_common.c Environment has a bad CRC, using default
+ -1 common/env_common.c Environment has a bad CRC, using default
Modem Support:
- CFG_EEPROM_PAGE_WRITE_DELAY_MS:
If defined, the number of milliseconds to delay between
- page writes. The default is zero milliseconds.
+ page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length in bytes of the EEPROM memory array address. Note
CROSS_COMPILE = ppc_4xx-
-U-Boot is intended to be simple to build. After installing the
+U-Boot is intended to be simple to build. After installing the
sources you must configure U-Boot for one specific board type. This
is done by typing:
at91rm9200dk_config omap1510inn_config MPC8260ADS_config
omap1610inn_config ZPC1900_config MPC8540ADS_config
MPC8560ADS_config QS850_config QS823_config
- QS860T_config DUET_ADS_config
+ QS860T_config DUET_ADS_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
cp - memory copy
cmp - memory compare
crc32 - checksum calculation
-imd - i2c memory display
-imm - i2c memory modify (auto-incrementing)
-inm - i2c memory modify (constant address)
-imw - i2c memory write (fill)
-icrc32 - i2c checksum calculation
-iprobe - probe to discover valid I2C chip addresses
-iloop - infinite loop on address range
-isdram - print SDRAM configuration information
-sspi - SPI utility commands
+imd - i2c memory display
+imm - i2c memory modify (auto-incrementing)
+inm - i2c memory modify (constant address)
+imw - i2c memory write (fill)
+icrc32 - i2c checksum calculation
+iprobe - probe to discover valid I2C chip addresses
+iloop - infinite loop on address range
+isdram - print SDRAM configuration information
+sspi - SPI utility commands
base - print or set address offset
printenv- print environment variables
setenv - set environment variables
make uImage
The "uImage" build target uses a special tool (in 'tools/mkimage') to
-encapsulate a compressed Linux kernel image with header information,
+encapsulate a compressed Linux kernel image with header information,
CRC32 checksum etc. for use with U-Boot. This is what we are doing:
* build a standard "vmlinux" kernel image (in ELF binary format):
Nevertheless, if you absolutely want to use it try adding this
configuration to your "File transfer protocols" section:
- Name Program Name U/D FullScr IO-Red. Multi
- X kermit /usr/bin/kermit -i -l %l -s Y U Y N N
- Y kermit /usr/bin/kermit -i -l %l -r N D Y N N
+ Name Program Name U/D FullScr IO-Red. Multi
+ X kermit /usr/bin/kermit -i -l %l -s Y U Y N N
+ Y kermit /usr/bin/kermit -i -l %l -r N D Y N N
NetBSD Notes:
MPC826x processors), on others (parts of) the data cache can be
locked as (mis-) used as memory, etc.
- Chris Hallinan posted a good summary of these issues to the
+ Chris Hallinan posted a good summary of these issues to the
u-boot-users mailing list:
Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
R1: stack pointer
R2: TOC pointer
R3-R4: parameter passing and return values
- R5-R10: parameter passing
+ R5-R10: parameter passing
R13: small data area pointer
R30: GOT pointer
R31: frame pointer
--- /dev/null
+#
+# (C) Copyright 2002-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o
+OBJS +=flash.o
+SOBJS = init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2002-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0xFFFE0000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
--- /dev/null
+/*
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+/*
+ * Ported to XPedite1000, 1/2 mb boot flash only
+ * Travis B. Sawyer, <travis.sawyer@sandburst.com>
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xfff80000}, /* 0:000: configuraton 3 */
+ {0xfff90000}, /* 1:001: configuraton 4 */
+ {0xfffa0000}, /* 2:010: configuraton 7 */
+ {0xfffb0000}, /* 3:011: configuraton 8 */
+ {0xfffc0000}, /* 4:100: configuraton 1 */
+ {0xfffd0000}, /* 5:101: configuraton 2 */
+ {0xfffe0000}, /* 6:110: configuraton 5 */
+ {0xffff0000} /* 7:111: configuraton 6 */
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+
+#ifdef CONFIG_XPEDITE1K
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned short index = 0;
+ int i;
+
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size(
+ (vu_long *)flash_addr_table[index][i], &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i]<<20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+ );
+ }
+ printf ("\n");
+ return;
+ }
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
+
+ /* Write auto select command: read Manufacturer ID */
+ udelay(10000);
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ udelay(1000);
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ udelay(1000);
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+ udelay(1000);
+
+#ifdef CONFIG_ADCIOP
+ value = addr2[2];
+#else
+ value = addr2[0];
+#endif
+
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (FLASH_WORD_SIZE)SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (FLASH_WORD_SIZE)STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+#ifdef CONFIG_ADCIOP
+ value = addr2[0]; /* device ID */
+ debug ("\ndev_code=%x\n", value);
+#else
+ value = addr2[1]; /* device ID */
+#endif
+
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000; /* => 512 kb */
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040) ||
+ (info->flash_id == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = addr2[4] & 1;
+#else
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+#endif
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile unsigned char *)info->start[0];
+ addr2[ADDR0] = 0xAA;
+ addr2[ADDR1] = 0x55;
+ addr2[ADDR0] = 0xF0; /* reset bank */
+#else
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif
+#else /* test-only */
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif /* test-only */
+ }
+
+ return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+ printf("Erasing sector %p\n", addr2);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ for (i=0; i<50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+#if 0
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+ wait_for_DQ7(info, l_sect);
+
+DONE:
+#endif
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
--- /dev/null
+/*
+* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbtab_end
--- /dev/null
+/*
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/xpedite1k/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/405gp_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/xpedite1k/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/405gp_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+long int fixed_sdram (void);
+
+int board_pre_init (void)
+{
+ unsigned long sdrreg;
+ /* TBS: Setup the GPIO access for the user LEDs */
+ mfsdr(sdr_pfc0, sdrreg);
+ mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
+ out32(CFG_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
+ LED0_OFF();
+ LED1_OFF();
+ LED2_OFF();
+ LED3_OFF();
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+
+ /* set the bus controller */
+ mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */
+ mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000003); /* SMI & UIC1 crit are critical */
+ mtdcr (uic0pr, 0xfffffe00); /* per ref-board manual */
+ mtdcr (uic0tr, 0x01c00000); /* per ref-board manual */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffc0ff); /* per ref-board manual */
+ mtdcr (uic1tr, 0x00ff8000); /* per ref-board manual */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000); /* */
+ mtdcr (uicb0tr, 0x00000000); /* */
+ mtdcr (uicb0vr, 0x00000001); /* */
+
+ LED0_ON();
+
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+ get_sys_info (&sysinfo);
+
+ printf ("Board: XES XPedite1000 440GX\n");
+ printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+
+ return (0);
+}
+
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram (0);
+#else
+ dram_size = fixed_sdram ();
+#endif
+ return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ *
+ * Assumes: 128 MB, non-ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ /* RA=10 RD=3 */
+ mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ udelay (400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ for (;;) {
+ mfsdram (mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+
+ return (128 * 1024 * 1024); /* 128 MB */
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * TBS:
+ * The xpedite1k is a PrPMC board, however for our purposes it is the host
+ *--------------------------------------------------------------------------*/
+ strap = mfdcr(cpc0_strp1);
+ if( (strap & 0x00100000) == 0 ){
+ printf("PCI: CPC0_STRP1[PAE] not set.\n");
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The ebony board is always configured as host. */
+ /* TBS: The xpedite1k is not necessarily the host, however for our purposes, it is. */
+ return(1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+
+ return (ctrlc());
+}
+
+void post_word_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CFG_POST_WORD_ADDR);
+
+ *save_addr = a;
+}
+
+ulong post_word_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CFG_POST_WORD_ADDR);
+
+ return *save_addr;
+}
+#endif
+
+/*-----------------------------------------------------------------------------
+ * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM
+ *-----------------------------------------------------------------------------
+ */
+static int enetaddr_num = 0;
+void board_get_enetaddr (uchar * enet)
+{
+ int i;
+ unsigned char buff[0x100], *cp;
+
+ /* Initialize I2C */
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ /* Read 256 bytes in EEPROM */
+ i2c_read (0x50, 0, 1, buff, 0x100);
+
+ if (enetaddr_num == 0) {
+ cp = &buff[0xF4];
+ enetaddr_num = 1;
+ }
+ else
+ cp = &buff[0xFA];
+
+ for (i = 0; i < 6; i++,cp++)
+ enet[i] = *cp;
+
+ printf ("MAC address = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ enet[0], enet[1], enet[2], enet[3], enet[4], enet[5]);
+
+}
#include <malloc.h>
#include "vecnum.h"
-#if defined(CONFIG_405GP) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+ ( defined(CONFIG_440) && !defined(CONFIG_NET_MULTI))
#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */
#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */
--- /dev/null
+/*-----------------------------------------------------------------------------+
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------+
+ *
+ * File Name: enetemac.c
+ *
+ * Function: Device driver for the ethernet EMAC3 macro on the 405GP.
+ *
+ * Author: Mark Wisner
+ *
+ * Change Activity-
+ *
+ * Date Description of Change BY
+ * --------- --------------------- ---
+ * 05-May-99 Created MKW
+ * 27-Jun-99 Clean up JWB
+ * 16-Jul-99 Added MAL error recovery and better IP packet handling MKW
+ * 29-Jul-99 Added Full duplex support MKW
+ * 06-Aug-99 Changed names for Mal CR reg MKW
+ * 23-Aug-99 Turned off SYE when running at 10Mbs MKW
+ * 24-Aug-99 Marked descriptor empty after call_xlc MKW
+ * 07-Sep-99 Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16 MCG
+ * to avoid chaining maximum sized packets. Push starting
+ * RX descriptor address up to the next cache line boundary.
+ * 16-Jan-00 Added support for booting with IP of 0x0 MKW
+ * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the
+ * EMAC_RXM register. JWB
+ * 12-Mar-01 anne-sophie.harnois@nextream.fr
+ * - Variables are compatible with those already defined in
+ * include/net.h
+ * - Receive buffer descriptor ring is used to send buffers
+ * to the user
+ * - Info print about send/received/handled packet number if
+ * INFO_405_ENET is set
+ * 17-Apr-01 stefan.roese@esd-electronics.com
+ * - MAL reset in "eth_halt" included
+ * - Enet speed and duplex output now in one line
+ * 08-May-01 stefan.roese@esd-electronics.com
+ * - MAL error handling added (eth_init called again)
+ * 13-Nov-01 stefan.roese@esd-electronics.com
+ * - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex
+ * 04-Jan-02 stefan.roese@esd-electronics.com
+ * - Wait for PHY auto negotiation to complete added
+ * 06-Feb-02 stefan.roese@esd-electronics.com
+ * - Bug fixed in waiting for auto negotiation to complete
+ * 26-Feb-02 stefan.roese@esd-electronics.com
+ * - rx and tx buffer descriptors now allocated (no fixed address
+ * used anymore)
+ * 17-Jun-02 stefan.roese@esd-electronics.com
+ * - MAL error debug printf 'M' removed (rx de interrupt may
+ * occur upon many incoming packets with only 4 rx buffers).
+ *-----------------------------------------------------------------------------*
+ * 17-Nov-03 travis.sawyer@sandburst.com
+ * - ported from 405gp_enet.c to utilized upto 4 EMAC ports
+ * in the 440GX. This port should work with the 440GP
+ * (2 EMACs) also
+ *-----------------------------------------------------------------------------*/
+
+#include <config.h>
+#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
+
+#include <common.h>
+#include <net.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+#include <commproc.h>
+#include <440gx_enet.h>
+#include <405_mal.h>
+#include <miiphy.h>
+#include <malloc.h>
+#include "vecnum.h"
+
+
+#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */
+#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */
+
+
+/* Ethernet Transmit and Receive Buffers */
+/* AS.HARNOIS
+ * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
+ * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
+ */
+#define ENET_MAX_MTU PKTSIZE
+#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
+
+
+/* define the number of channels implemented */
+#define EMAC_RXCHL EMAC_NUM_DEV
+#define EMAC_TXCHL EMAC_NUM_DEV
+
+/*-----------------------------------------------------------------------------+
+ * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
+ * Interrupt Controller).
+ *-----------------------------------------------------------------------------*/
+#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
+#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
+#define EMAC_UIC_DEF UIC_ENET
+
+#undef INFO_440_ENET
+
+/*-----------------------------------------------------------------------------+
+ * Global variables. TX and RX descriptors and buffers.
+ *-----------------------------------------------------------------------------*/
+/* IER globals */
+static uint32_t mal_ier;
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes and externals.
+ *-----------------------------------------------------------------------------*/
+static void enet_rcv (struct eth_device *dev, unsigned long malisr);
+
+int enetInt (struct eth_device *dev);
+static void mal_err (struct eth_device *dev, unsigned long isr,
+ unsigned long uic, unsigned long maldef,
+ unsigned long mal_errr);
+static void emac_err (struct eth_device *dev, unsigned long isr);
+
+/*-----------------------------------------------------------------------------+
+| ppc_440x_eth_halt
+| Disable MAL channel, and EMACn
+|
+|
++-----------------------------------------------------------------------------*/
+static void ppc_440x_eth_halt (struct eth_device *dev)
+{
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+ uint32_t failsafe = 10000;
+
+ out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
+
+ /* 1st reset MAL channel */
+ /* Note: writing a 0 to a channel has no effect */
+ mtdcr (maltxcarr, (MAL_CR_MMSR >> hw_p->devnum));
+ mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum));
+
+ /* wait for reset */
+ while (mfdcr (maltxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
+ udelay (1000); /* Delay 1 MS so as not to hammer the register */
+ failsafe--;
+ if (failsafe == 0)
+ break;
+
+ }
+
+ /* EMAC RESET */
+ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+
+ hw_p->print_speed = 1; /* print speed message again next time */
+
+ return;
+}
+
+extern int phy_setup_aneg (unsigned char addr);
+extern int miiphy_reset (unsigned char addr);
+
+static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
+{
+ int i;
+ unsigned long reg;
+ unsigned long msr;
+ unsigned long speed;
+ unsigned long duplex;
+ unsigned long failsafe;
+ unsigned mode_reg;
+ unsigned short devnum;
+ unsigned short reg_short;
+ sys_info_t sysinfo;
+
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+
+ /* before doing anything, figure out if we have a MAC address */
+ /* if not, bail */
+ if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ return -1;
+
+ /* Need to get the OPB frequency so we can access the PHY */
+ get_sys_info (&sysinfo);
+
+
+ msr = mfmsr ();
+ mtmsr (msr & ~(MSR_EE)); /* disable interrupts */
+
+ devnum = hw_p->devnum;
+
+#ifdef INFO_440_ENET
+ /* AS.HARNOIS
+ * We should have :
+ * hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX
+ * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it
+ * is possible that new packets (without relationship with
+ * current transfer) have got the time to arrived before
+ * netloop calls eth_halt
+ */
+ printf ("About preceeding transfer (eth%d):\n"
+ "- Sent packet number %d\n"
+ "- Received packet number %d\n"
+ "- Handled packet number %d\n",
+ hw_p->devnum,
+ hw_p->stats.pkts_tx,
+ hw_p->stats.pkts_rx, hw_p->stats.pkts_handled);
+
+ hw_p->stats.pkts_tx = 0;
+ hw_p->stats.pkts_rx = 0;
+ hw_p->stats.pkts_handled = 0;
+#endif
+
+ /* MAL Channel RESET */
+ /* 1st reset MAL channel */
+ /* Note: writing a 0 to a channel has no effect */
+ mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
+ mtdcr (malrxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
+
+ /* wait for reset */
+ /* TBS: should have udelay and failsafe here */
+ failsafe = 10000;
+ /* wait for reset */
+ while (mfdcr (maltxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
+ udelay (1000); /* Delay 1 MS so as not to hammer the register */
+ failsafe--;
+ if (failsafe == 0)
+ break;
+
+ }
+
+ hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */
+ hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */
+
+ hw_p->rx_slot = 0; /* MAL Receive Slot */
+ hw_p->rx_i_index = 0; /* Receive Interrupt Queue Index */
+ hw_p->rx_u_index = 0; /* Receive User Queue Index */
+
+ hw_p->tx_slot = 0; /* MAL Transmit Slot */
+ hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */
+ hw_p->tx_u_index = 0; /* Transmit User Queue Index */
+
+ /* set RMII mode */
+ /* NOTE: 440GX spec states that mode is mutually exclusive */
+ /* NOTE: Therefore, disable all other EMACS, since we handle */
+ /* NOTE: only one emac at a time */
+ reg = 0;
+ out32 (ZMII_FER, 0);
+ udelay (100);
+ out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
+ out32 (ZMII_SSR, 0x11110000);
+ /* reset emac so we have access to the phy */
+ __asm__ volatile ("eieio");
+
+ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+ __asm__ volatile ("eieio");
+
+ if ((devnum == 2) || (devnum == 3))
+ out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
+ (RGMII_FER_RGMII << RGMII_FER_V (3))));
+ __asm__ volatile ("eieio");
+
+ failsafe = 1000;
+ while ((in32 (EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
+ udelay (1000);
+ failsafe--;
+ }
+
+ /* Whack the M1 register */
+ mode_reg = 0x0;
+ mode_reg &= ~0x00000038;
+ if (sysinfo.freqOPB <= 50000000);
+ else if (sysinfo.freqOPB <= 66666667)
+ mode_reg |= EMAC_M1_OBCI_66;
+ else if (sysinfo.freqOPB <= 83333333)
+ mode_reg |= EMAC_M1_OBCI_83;
+ else if (sysinfo.freqOPB <= 100000000)
+ mode_reg |= EMAC_M1_OBCI_100;
+ else
+ mode_reg |= EMAC_M1_OBCI_GT100;
+
+ out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
+
+
+ /* wait for PHY to complete auto negotiation */
+ reg_short = 0;
+#ifndef CONFIG_CS8952_PHY
+ switch (devnum) {
+ case 0:
+ reg = CONFIG_PHY_ADDR;
+ break;
+ case 1:
+ reg = CONFIG_PHY1_ADDR;
+ break;
+#if defined (CONFIG_440_GX)
+ case 2:
+ reg = CONFIG_PHY2_ADDR;
+ break;
+ case 3:
+ reg = CONFIG_PHY3_ADDR;
+ break;
+#endif
+ default:
+ reg = CONFIG_PHY_ADDR;
+ break;
+ }
+
+ /* Reset the phy */
+ miiphy_reset (reg);
+
+ /* Start/Restart autonegotiation */
+/* miiphy_write(reg, PHY_BMCR, 0x9340); */
+ phy_setup_aneg (reg);
+ udelay (1000);
+
+ miiphy_read (reg, PHY_BMSR, ®_short);
+
+ /*
+ * Wait if PHY is able of autonegotiation and autonegotiation is not complete
+ */
+ if ((reg_short & PHY_BMSR_AUTN_ABLE)
+ && !(reg_short & PHY_BMSR_AUTN_COMP)) {
+ puts ("Waiting for PHY auto negotiation to complete");
+ i = 0;
+ while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts (" TIMEOUT !\n");
+ break;
+ }
+
+ if ((i++ % 1000) == 0) {
+ putc ('.');
+ }
+ udelay (1000); /* 1 ms */
+ miiphy_read (reg, PHY_BMSR, ®_short);
+
+ }
+ puts (" done\n");
+ udelay (500000); /* another 500 ms (results in faster booting) */
+ }
+#endif
+ speed = miiphy_speed (reg);
+ duplex = miiphy_duplex (reg);
+
+ if (hw_p->print_speed) {
+ hw_p->print_speed = 0;
+ printf ("ENET Speed is %d Mbps - %s duplex connection\n",
+ (int) speed, (duplex == HALF) ? "HALF" : "FULL");
+ }
+
+ /* Set ZMII/RGMII speed according to the phy link speed */
+ reg = in32 (ZMII_SSR);
+ if (speed == 100)
+ out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
+ else
+ out32 (ZMII_SSR,
+ reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
+
+ if ((devnum == 2) || (devnum == 3)) {
+ if (speed == 1000)
+ reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 100)
+ reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
+ else
+ reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
+
+ out32 (RGMII_SSR, reg);
+ }
+
+ /* set the Mal configuration reg */
+ /* Errata 1.12: MAL_1 -- Disable MAL bursting */
+ if (get_pvr () == PVR_440GP_RB)
+ mtdcr (malmcr,
+ MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+ else
+ mtdcr (malmcr,
+ MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+ MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
+
+ /* Free "old" buffers */
+ if (hw_p->alloc_tx_buf)
+ free (hw_p->alloc_tx_buf);
+ if (hw_p->alloc_rx_buf)
+ free (hw_p->alloc_rx_buf);
+
+ /*
+ * Malloc MAL buffer desciptors, make sure they are
+ * aligned on cache line boundary size
+ * (401/403/IOP480 = 16, 405 = 32)
+ * and doesn't cross cache block boundaries.
+ */
+ hw_p->alloc_tx_buf =
+ (mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_TX_BUFF) +
+ ((2 * CFG_CACHELINE_SIZE) - 2));
+ if (((int) hw_p->alloc_tx_buf & CACHELINE_MASK) != 0) {
+ hw_p->tx =
+ (mal_desc_t *) ((int) hw_p->alloc_tx_buf +
+ CFG_CACHELINE_SIZE -
+ ((int) hw_p->
+ alloc_tx_buf & CACHELINE_MASK));
+ } else {
+ hw_p->tx = hw_p->alloc_tx_buf;
+ }
+
+ hw_p->alloc_rx_buf =
+ (mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_RX_BUFF) +
+ ((2 * CFG_CACHELINE_SIZE) - 2));
+ if (((int) hw_p->alloc_rx_buf & CACHELINE_MASK) != 0) {
+ hw_p->rx =
+ (mal_desc_t *) ((int) hw_p->alloc_rx_buf +
+ CFG_CACHELINE_SIZE -
+ ((int) hw_p->
+ alloc_rx_buf & CACHELINE_MASK));
+ } else {
+ hw_p->rx = hw_p->alloc_rx_buf;
+ }
+
+ for (i = 0; i < NUM_TX_BUFF; i++) {
+ hw_p->tx[i].ctrl = 0;
+ hw_p->tx[i].data_len = 0;
+ if (hw_p->first_init == 0)
+ hw_p->txbuf_ptr =
+ (char *) malloc (ENET_MAX_MTU_ALIGNED);
+ hw_p->tx[i].data_ptr = hw_p->txbuf_ptr;
+ if ((NUM_TX_BUFF - 1) == i)
+ hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP;
+ hw_p->tx_run[i] = -1;
+#if 0
+ printf ("TX_BUFF %d @ 0x%08lx\n", i,
+ (ulong) hw_p->tx[i].data_ptr);
+#endif
+ }
+
+ for (i = 0; i < NUM_RX_BUFF; i++) {
+ hw_p->rx[i].ctrl = 0;
+ hw_p->rx[i].data_len = 0;
+ /* rx[i].data_ptr = (char *) &rx_buff[i]; */
+ hw_p->rx[i].data_ptr = (char *) NetRxPackets[i];
+ if ((NUM_RX_BUFF - 1) == i)
+ hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP;
+ hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
+ hw_p->rx_ready[i] = -1;
+#if 0
+ printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr);
+#endif
+ }
+
+ reg = 0x00000000;
+
+ reg |= dev->enetaddr[0]; /* set high address */
+ reg = reg << 8;
+ reg |= dev->enetaddr[1];
+
+ out32 (EMAC_IAH + hw_p->hw_addr, reg);
+
+ reg = 0x00000000;
+ reg |= dev->enetaddr[2]; /* set low address */
+ reg = reg << 8;
+ reg |= dev->enetaddr[3];
+ reg = reg << 8;
+ reg |= dev->enetaddr[4];
+ reg = reg << 8;
+ reg |= dev->enetaddr[5];
+
+ out32 (EMAC_IAL + hw_p->hw_addr, reg);
+
+ switch (devnum) {
+ case 1:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (maltxctp1r, hw_p->tx);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (malrxctp1r, hw_p->rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+#if defined (CONFIG_440_GX)
+ case 2:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (maltxctp2r, hw_p->tx);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (malrxctp2r, hw_p->rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+ case 3:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (maltxctp3r, hw_p->tx);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (malrxctp3r, hw_p->rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+#endif /*CONFIG_440_GX */
+ case 0:
+ default:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (maltxctp0r, hw_p->tx);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (malrxctp0r, hw_p->rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+ }
+
+ /* Enable MAL transmit and receive channels */
+ mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
+ mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
+
+ /* set transmit enable & receive enable */
+ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+
+ /* set receive fifo to 4k and tx fifo to 2k */
+ mode_reg = in32 (EMAC_M1 + hw_p->hw_addr);
+ mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K;
+
+ /* set speed */
+ /* TBS: do 1GbE */
+ if (speed == _100BASET)
+ mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST;
+ else
+ mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */
+ if (duplex == FULL)
+ mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST;
+
+ out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
+
+ /* Enable broadcast and indvidual address */
+ /* TBS: enabling runts as some misbehaved nics will send runts */
+ out32 (EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE);
+
+ /* we probably need to set the tx mode1 reg? maybe at tx time */
+
+ /* set transmit request threshold register */
+ out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */
+
+ /* set receive low/high water mark register */
+ /* 440GP has a 64 byte burst length */
+ out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
+ out32 (EMAC_TXM1 + hw_p->hw_addr, 0xf8640000);
+
+ /* Set fifo limit entry in tx mode 0 */
+ out32 (EMAC_TXM0 + hw_p->hw_addr, 0x00000003);
+ /* Frame gap set */
+ out32 (EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
+
+ /* Set EMAC IER */
+ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS |
+ EMAC_ISR_PTLE | EMAC_ISR_ORE | EMAC_ISR_IRE;
+ if (speed == _100BASET)
+ hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE;
+
+ out32 (EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */
+ out32 (EMAC_IER + hw_p->hw_addr, hw_p->emac_ier);
+
+ if (hw_p->first_init == 0) {
+ /*
+ * Connect interrupt service routines
+ */
+ irq_install_handler (VECNUM_EWU0 + (hw_p->devnum * 2),
+ (interrupt_handler_t *) enetInt, dev);
+ irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
+ (interrupt_handler_t *) enetInt, dev);
+ }
+#if 0 /* done by irq_install_handler */
+ /* set up interrupt handler */
+ /* setup interrupt controller to take interrupts from the MAL &
+ EMAC */
+ mtdcr (uicsr, 0xffffffff); /* clear pending interrupts */
+ mtdcr (uicer, mfdcr (uicer) | MAL_UIC_DEF | EMAC_UIC_DEF);
+#endif
+
+ mtmsr (msr); /* enable interrupts again */
+
+ hw_p->bis = bis;
+ hw_p->first_init = 1;
+
+ return (1);
+}
+
+
+static int ppc_440x_eth_send (struct eth_device *dev, volatile void *ptr,
+ int len)
+{
+ struct enet_frame *ef_ptr;
+ ulong time_start, time_now;
+ unsigned long temp_txm0;
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+
+ ef_ptr = (struct enet_frame *) ptr;
+
+ /*-----------------------------------------------------------------------+
+ * Copy in our address into the frame.
+ *-----------------------------------------------------------------------*/
+ (void) memcpy (ef_ptr->source_addr, dev->enetaddr, ENET_ADDR_LENGTH);
+
+ /*-----------------------------------------------------------------------+
+ * If frame is too long or too short, modify length.
+ *-----------------------------------------------------------------------*/
+ /* TBS: where does the fragment go???? */
+ if (len > ENET_MAX_MTU)
+ len = ENET_MAX_MTU;
+
+ /* memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */
+ memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len);
+
+ /*-----------------------------------------------------------------------+
+ * set TX Buffer busy, and send it
+ *-----------------------------------------------------------------------*/
+ hw_p->tx[hw_p->tx_slot].ctrl = (MAL_TX_CTRL_LAST |
+ EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) &
+ ~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA);
+ if ((NUM_TX_BUFF - 1) == hw_p->tx_slot)
+ hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_WRAP;
+
+ hw_p->tx[hw_p->tx_slot].data_len = (short) len;
+ hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY;
+
+ __asm__ volatile ("eieio");
+
+ out32 (EMAC_TXM0 + hw_p->hw_addr,
+ in32 (EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
+#ifdef INFO_440_ENET
+ hw_p->stats.pkts_tx++;
+#endif
+
+ /*-----------------------------------------------------------------------+
+ * poll unitl the packet is sent and then make sure it is OK
+ *-----------------------------------------------------------------------*/
+ time_start = get_timer (0);
+ while (1) {
+ temp_txm0 = in32 (EMAC_TXM0 + hw_p->hw_addr);
+ /* loop until either TINT turns on or 3 seconds elapse */
+ if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) {
+ /* transmit is done, so now check for errors
+ * If there is an error, an interrupt should
+ * happen when we return
+ */
+ time_now = get_timer (0);
+ if ((time_now - time_start) > 3000) {
+ return (-1);
+ }
+ } else {
+ return (len);
+ }
+ }
+}
+
+
+int enetInt (struct eth_device *dev)
+{
+ int serviced;
+ int rc = -1; /* default to not us */
+ unsigned long mal_isr;
+ unsigned long emac_isr = 0;
+ unsigned long mal_rx_eob;
+ unsigned long my_uic0msr, my_uic1msr;
+
+#if defined(CONFIG_440_GX)
+ unsigned long my_uic2msr;
+#endif
+ EMAC_440GX_HW_PST hw_p;
+
+ /*
+ * Because the mal is generic, we need to get the current
+ * eth device
+ */
+ dev = eth_get_dev ();
+
+ hw_p = dev->priv;
+
+
+ /* enter loop that stays in interrupt code until nothing to service */
+ do {
+ serviced = 0;
+
+ my_uic0msr = mfdcr (uic0msr);
+ my_uic1msr = mfdcr (uic1msr);
+#if defined(CONFIG_440_GX)
+ my_uic2msr = mfdcr (uic2msr);
+#endif
+ if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
+ && !(my_uic1msr &
+ (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE |
+ UIC_MRDE))) {
+ /* not for us */
+ return (rc);
+ }
+#if defined (CONFIG_440_GX)
+ if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
+ && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) {
+ /* not for us */
+ return (rc);
+ }
+#endif
+ /* get and clear controller status interrupts */
+ /* look at Mal and EMAC interrupts */
+ if ((my_uic0msr & (UIC_MRE | UIC_MTE))
+ || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ /* we have a MAL interrupt */
+ mal_isr = mfdcr (malesr);
+ /* look for mal error */
+ if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
+ mal_err (dev, mal_isr, my_uic0msr,
+ MAL_UIC_DEF, MAL_UIC_ERR);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+
+ /* port by port dispatch of emac interrupts */
+ if (hw_p->devnum == 0) {
+ if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */
+ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+ if ((hw_p->emac_ier & emac_isr) != 0) {
+ emac_err (dev, emac_isr);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ if ((hw_p->emac_ier & emac_isr)
+ || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ return (rc); /* we had errors so get out */
+ }
+ }
+
+ if (hw_p->devnum == 1) {
+ if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */
+ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+ if ((hw_p->emac_ier & emac_isr) != 0) {
+ emac_err (dev, emac_isr);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ if ((hw_p->emac_ier & emac_isr)
+ || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ return (rc); /* we had errors so get out */
+ }
+ }
+#if defined (CONFIG_440_GX)
+ if (hw_p->devnum == 2) {
+ if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */
+ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+ if ((hw_p->emac_ier & emac_isr) != 0) {
+ emac_err (dev, emac_isr);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ if ((hw_p->emac_ier & emac_isr)
+ || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic2sr, UIC_ETH2);
+ return (rc); /* we had errors so get out */
+ }
+ }
+
+ if (hw_p->devnum == 3) {
+ if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */
+ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+ if ((hw_p->emac_ier & emac_isr) != 0) {
+ emac_err (dev, emac_isr);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ if ((hw_p->emac_ier & emac_isr)
+ || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic2sr, UIC_ETH3);
+ return (rc); /* we had errors so get out */
+ }
+ }
+#endif /* CONFIG_440_GX */
+ /* handle MAX TX EOB interrupt from a tx */
+ if (my_uic0msr & UIC_MTE) {
+ mal_rx_eob = mfdcr (maltxeobisr);
+ mtdcr (maltxeobisr, mal_rx_eob);
+ mtdcr (uic0sr, UIC_MTE);
+ }
+ /* handle MAL RX EOB interupt from a receive */
+ /* check for EOB on valid channels */
+ if (my_uic0msr & UIC_MRE) {
+ mal_rx_eob = mfdcr (malrxeobisr);
+ if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
+ /* clear EOB
+ mtdcr(malrxeobisr, mal_rx_eob); */
+ enet_rcv (dev, emac_isr);
+ /* indicate that we serviced an interrupt */
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ mtdcr (uic0sr, UIC_MRE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ switch (hw_p->devnum) {
+ case 0:
+ mtdcr (uic1sr, UIC_ETH0);
+ break;
+ case 1:
+ mtdcr (uic1sr, UIC_ETH1);
+ break;
+#if defined (CONFIG_440_GX)
+ case 2:
+ mtdcr (uic2sr, UIC_ETH2);
+ break;
+ case 3:
+ mtdcr (uic2sr, UIC_ETH3);
+ break;
+#endif /* CONFIG_440_GX */
+ default:
+ break;
+ }
+ } while (serviced);
+
+ return (rc);
+}
+
+/*-----------------------------------------------------------------------------+
+ * MAL Error Routine
+ *-----------------------------------------------------------------------------*/
+static void mal_err (struct eth_device *dev, unsigned long isr,
+ unsigned long uic, unsigned long maldef,
+ unsigned long mal_errr)
+{
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+
+ mtdcr (malesr, isr); /* clear interrupt */
+
+ /* clear DE interrupt */
+ mtdcr (maltxdeir, 0xC0000000);
+ mtdcr (malrxdeir, 0x80000000);
+
+#ifdef INFO_440_ENET
+ printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr);
+#endif
+
+ eth_init (hw_p->bis); /* start again... */
+}
+
+/*-----------------------------------------------------------------------------+
+ * EMAC Error Routine
+ *-----------------------------------------------------------------------------*/
+static void emac_err (struct eth_device *dev, unsigned long isr)
+{
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+
+ printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
+ out32 (EMAC_ISR + hw_p->hw_addr, isr);
+}
+
+/*-----------------------------------------------------------------------------+
+ * enet_rcv() handles the ethernet receive data
+ *-----------------------------------------------------------------------------*/
+static void enet_rcv (struct eth_device *dev, unsigned long malisr)
+{
+ struct enet_frame *ef_ptr;
+ unsigned long data_len;
+ unsigned long rx_eob_isr;
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+
+ int handled = 0;
+ int i;
+ int loop_count = 0;
+
+ rx_eob_isr = mfdcr (malrxeobisr);
+ if ((0x80000000 >> hw_p->devnum) & rx_eob_isr) {
+ /* clear EOB */
+ mtdcr (malrxeobisr, rx_eob_isr);
+
+ /* EMAC RX done */
+ while (1) { /* do all */
+ i = hw_p->rx_slot;
+
+ if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl)
+ || (loop_count >= NUM_RX_BUFF))
+ break;
+ loop_count++;
+ hw_p->rx_slot++;
+ if (NUM_RX_BUFF == hw_p->rx_slot)
+ hw_p->rx_slot = 0;
+ handled++;
+ data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */
+ if (data_len) {
+ if (data_len > ENET_MAX_MTU) /* Check len */
+ data_len = 0;
+ else {
+ if (EMAC_RX_ERRORS & hw_p->rx[i].ctrl) { /* Check Errors */
+ data_len = 0;
+ hw_p->stats.rx_err_log[hw_p->
+ rx_err_index]
+ = hw_p->rx[i].ctrl;
+ hw_p->rx_err_index++;
+ if (hw_p->rx_err_index ==
+ MAX_ERR_LOG)
+ hw_p->rx_err_index =
+ 0;
+ } /* emac_erros */
+ } /* data_len < max mtu */
+ } /* if data_len */
+ if (!data_len) { /* no data */
+ hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY; /* Free Recv Buffer */
+
+ hw_p->stats.data_len_err++; /* Error at Rx */
+ }
+
+ /* !data_len */
+ /* AS.HARNOIS */
+ /* Check if user has already eaten buffer */
+ /* if not => ERROR */
+ else if (hw_p->rx_ready[hw_p->rx_i_index] != -1) {
+ if (hw_p->is_receiving)
+ printf ("ERROR : Receive buffers are full!\n");
+ break;
+ } else {
+ hw_p->stats.rx_frames++;
+ hw_p->stats.rx += data_len;
+ ef_ptr = (struct enet_frame *) hw_p->rx[i].
+ data_ptr;
+#ifdef INFO_440_ENET
+ hw_p->stats.pkts_rx++;
+#endif
+ /* AS.HARNOIS
+ * use ring buffer
+ */
+ hw_p->rx_ready[hw_p->rx_i_index] = i;
+ hw_p->rx_i_index++;
+ if (NUM_RX_BUFF == hw_p->rx_i_index)
+ hw_p->rx_i_index = 0;
+
+ /* printf("X"); /|* test-only *|/ */
+
+ /* AS.HARNOIS
+ * free receive buffer only when
+ * buffer has been handled (eth_rx)
+ rx[i].ctrl |= MAL_RX_CTRL_EMPTY;
+ */
+ } /* if data_len */
+ } /* while */
+ } /* if EMACK_RXCHL */
+}
+
+
+static int ppc_440x_eth_rx (struct eth_device *dev)
+{
+ int length;
+ int user_index;
+ unsigned long msr;
+ EMAC_440GX_HW_PST hw_p = dev->priv;
+
+ hw_p->is_receiving = 1; /* tell driver */
+
+ for (;;) {
+ /* AS.HARNOIS
+ * use ring buffer and
+ * get index from rx buffer desciptor queue
+ */
+ user_index = hw_p->rx_ready[hw_p->rx_u_index];
+ if (user_index == -1) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ msr = mfmsr ();
+ mtmsr (msr & ~(MSR_EE));
+
+ length = hw_p->rx[user_index].data_len;
+
+ /* Pass the packet up to the protocol layers. */
+ /* NetReceive(NetRxPackets[rxIdx], length - 4); */
+ /* NetReceive(NetRxPackets[i], length); */
+ NetReceive (NetRxPackets[user_index], length - 4);
+ /* Free Recv Buffer */
+ hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY;
+ /* Free rx buffer descriptor queue */
+ hw_p->rx_ready[hw_p->rx_u_index] = -1;
+ hw_p->rx_u_index++;
+ if (NUM_RX_BUFF == hw_p->rx_u_index)
+ hw_p->rx_u_index = 0;
+
+#ifdef INFO_440_ENET
+ hw_p->stats.pkts_handled++;
+#endif
+
+ mtmsr (msr); /* Enable IRQ's */
+ }
+
+ hw_p->is_receiving = 0; /* tell driver */
+
+ return length;
+}
+
+int ppc_440x_eth_initialize (bd_t * bis)
+{
+ static int virgin = 0;
+ unsigned long pfc1;
+ struct eth_device *dev;
+ int eth_num = 0;
+
+ EMAC_440GX_HW_PST hw = NULL;
+
+ mfsdr (sdr_pfc1, pfc1);
+ pfc1 &= ~(0x01e00000);
+ pfc1 |= 0x01200000;
+ mtsdr (sdr_pfc1, pfc1);
+
+ for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) {
+
+ /* See if we can actually bring up the interface, otherwise, skip it */
+ switch (eth_num) {
+ case 0:
+ if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ continue;
+ break;
+ case 1:
+ if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) ==
+ 0)
+ continue;
+ break;
+ case 2:
+ if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) ==
+ 0)
+ continue;
+ break;
+ case 3:
+ if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) ==
+ 0)
+ continue;
+ break;
+ default:
+ if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ continue;
+ break;
+ }
+
+ /* Allocate device structure */
+ dev = (struct eth_device *) malloc (sizeof (*dev));
+ if (dev == NULL) {
+ printf (__FUNCTION__
+ ": Cannot allocate eth_device %d\n", eth_num);
+ return (-1);
+ }
+
+ /* Allocate our private use data */
+ hw = (EMAC_440GX_HW_PST) malloc (sizeof (*hw));
+ if (hw == NULL) {
+ printf (__FUNCTION__
+ ": Cannot allocate private hw data for eth_device %d",
+ eth_num);
+ free (dev);
+ return (-1);
+ }
+
+ switch (eth_num) {
+ case 0:
+ hw->hw_addr = 0;
+ memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
+ break;
+ case 1:
+ hw->hw_addr = 0x100;
+ memcpy (dev->enetaddr, bis->bi_enet1addr, 6);
+ break;
+ case 2:
+ hw->hw_addr = 0x400;
+ memcpy (dev->enetaddr, bis->bi_enet2addr, 6);
+ break;
+ case 3:
+ hw->hw_addr = 0x600;
+ memcpy (dev->enetaddr, bis->bi_enet3addr, 6);
+ break;
+ default:
+ hw->hw_addr = 0;
+ memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
+ break;
+ }
+
+ hw->devnum = eth_num;
+
+ sprintf (dev->name, "ppc_440x_eth%d", eth_num);
+ dev->priv = (void *) hw;
+ dev->init = ppc_440x_eth_init;
+ dev->halt = ppc_440x_eth_halt;
+ dev->send = ppc_440x_eth_send;
+ dev->recv = ppc_440x_eth_rx;
+
+ if (0 == virgin) {
+ /* set the MAL IER ??? names may change with new spec ??? */
+ mal_ier =
+ MAL_IER_DE | MAL_IER_NE | MAL_IER_TE |
+ MAL_IER_OPBE | MAL_IER_PLBE;
+ mtdcr (malesr, 0xffffffff); /* clear pending interrupts */
+ mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */
+ mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */
+ mtdcr (malier, mal_ier);
+
+ /* install MAL interrupt handler */
+ irq_install_handler (VECNUM_MS,
+ (interrupt_handler_t *) enetInt,
+ dev);
+ irq_install_handler (VECNUM_MTE,
+ (interrupt_handler_t *) enetInt,
+ dev);
+ irq_install_handler (VECNUM_MRE,
+ (interrupt_handler_t *) enetInt,
+ dev);
+ irq_install_handler (VECNUM_TXDE,
+ (interrupt_handler_t *) enetInt,
+ dev);
+ irq_install_handler (VECNUM_RXDE,
+ (interrupt_handler_t *) enetInt,
+ dev);
+ virgin = 1;
+ }
+
+ eth_register (dev);
+
+ } /* end for each supported device */
+ return (1);
+}
+#endif /* CONFIG_440 && CONFIG_NET_MULTI */
START = start.o resetvec.o kgdb.o
AOBJS = dcr.o
-COBJS = traps.o serial.o cpu.o cpu_init.o speed.o interrupts.o \
- 405gp_pci.o 405gp_enet.o miiphy.o i2c.o bedbug_405.o \
- spd_sdram.o sdram.o
+COBJS = 405gp_enet.o 405gp_pci.o 440gx_enet.o \
+ bedbug_405.o \
+ cpu.o cpu_init.o i2c.o interrupts.o \
+ miiphy.o miiphy_440.o sdram.o serial.o \
+ spd_sdram.o speed.o traps.o
+
OBJS = $(AOBJS) $(COBJS)
all: .depend $(START) $(LIB)
#endif
#if defined(CONFIG_440)
- puts ("IBM PowerPC 440 Rev. ");
+ puts ("IBM PowerPC 440 G");
switch(pvr) {
case PVR_440GP_RB:
- putc('B');
+ puts("P Rev. B");
/* See errata 1.12: CHIP_4 */
if ((mfdcr(cpc0_sys0) != mfdcr(cpc0_strp0)) ||
(mfdcr(cpc0_sys1) != mfdcr(cpc0_strp1)) ){
}
break;
case PVR_440GP_RC:
- putc('C');
+ puts("P Rev. C");
+ break;
+ case PVR_440GX_RA:
+ puts("X Rev. A");
+ break;
+ case PVR_440GX_RB:
+ puts("X Rev. B");
break;
default:
printf ("UNKNOWN (PVR=%08x)", pvr);
* (C) Copyright 2002 (440 port)
* Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
*
+ * (C) Copyright 2003 (440GX port)
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
-#endif
+
+#if defined(CONFIG_440_GX)
+static struct irq_action irq_vecs2[32]; /* For UIC2 */
+
+void uic0_interrupt( void * parms); /* UIC0 handler */
+void uic2_interrupt( void * parms); /* UIC2 handler */
+#endif /* CONFIG_440_GX */
+
+#endif /* CONFIG_440 */
/****************************************************************************/
#if defined(CONFIG_440)
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
+#if defined(CONFIG_440_GX)
+ irq_vecs2[vec].handler = NULL;
+ irq_vecs2[vec].arg = NULL;
+ irq_vecs2[vec].count = 0;
+#endif /* CONFIG_440_GX */
#endif
}
set_evpr(0x00000000);
#if defined(CONFIG_440)
+#if !defined(CONFIG_440_GX)
/* Install the UIC1 handlers */
irq_install_handler(VECNUM_UIC1NC, uic1_interrupt, 0);
irq_install_handler(VECNUM_UIC1C, uic1_interrupt, 0);
#endif
+#endif
+
+#if defined(CONFIG_440_GX)
+ /* Enable UIC interrupts via UIC Base Enable Register */
+ mtdcr(uicb0er, UICB0_ALL);
+ mtdcr(uicb0cr, UICB0_ALL);
+#endif
return (0);
}
/*
* Handle external interrupts
*/
+#if defined(CONFIG_440_GX)
+void external_interrupt(struct pt_regs *regs)
+{
+ ulong uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ /* 440 GX uses base uic register */
+ uic_msr = mfdcr(uicb0msr);
+
+ uic0_interrupt(0);
+ uic1_interrupt(0);
+ uic2_interrupt(0);
+
+ mtdcr(uicb0sr, UICB0_ALL);
+
+ return;
+
+} /* external_interrupt CONFIG_440_GX */
+
+#else
+
void external_interrupt(struct pt_regs *regs)
{
ulong uic_msr;
vec++;
}
}
+#endif
+
+#if defined(CONFIG_440_GX)
+/* Handler for UIC0 interrupt */
+void uic0_interrupt( void * parms)
+{
+ ulong uic_msr;
+ ulong msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = mfdcr(uicmsr);
+ msr_shift = uic_msr;
+ vec = 0;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000) {
+ /*
+ * Increment irq counter (for debug purpose only)
+ */
+ irq_vecs[vec].count++;
+
+ if (irq_vecs[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
+ } else {
+ mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> vec));
+ printf ("Masking bogus interrupt vector (uic0) 0x%x\n", vec);
+ }
+
+ /*
+ * After servicing the interrupt, we have to remove the status indicator.
+ */
+ mtdcr(uicsr, (0x80000000 >> vec));
+ }
+
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+
+#endif /* CONFIG_440_GX */
#if defined(CONFIG_440)
/* Handler for UIC1 interrupt */
}
#endif /* defined(CONFIG_440) */
+#if defined(CONFIG_440_GX)
+/* Handler for UIC1 interrupt */
+void uic2_interrupt( void * parms)
+{
+ ulong uic2_msr;
+ ulong msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic2_msr = mfdcr(uic2msr);
+ msr_shift = uic2_msr;
+ vec = 0;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000) {
+ /*
+ * Increment irq counter (for debug purpose only)
+ */
+ irq_vecs2[vec].count++;
+
+ if (irq_vecs2[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs2[vec].handler)(irq_vecs2[vec].arg);
+ } else {
+ mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> vec));
+ printf ("Masking bogus interrupt vector (uic1) 0x%x\n", vec);
+ }
+
+ /*
+ * After servicing the interrupt, we have to remove the status indicator.
+ */
+ mtdcr(uic2sr, (0x80000000 >> vec));
+ }
+
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+#endif /* defined(CONFIG_440_GX) */
+
/****************************************************************************/
/*
* Install and free a interrupt handler.
*/
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
{
struct irq_action *irqa = irq_vecs;
- int i = vec;
+ int i = vec;
#if defined(CONFIG_440)
+#if defined(CONFIG_440_GX)
+ if ((vec > 31) && (vec < 64)) {
+ i = vec - 32;
+ irqa = irq_vecs1;
+ } else if (vec > 63) {
+ i = vec - 64;
+ irqa = irq_vecs2;
+ }
+#else /* CONFIG_440_GX */
if (vec > 31) {
i = vec - 32;
irqa = irq_vecs1;
}
-#endif
+#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440 */
if (irqa[i].handler != NULL) {
printf ("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
- vec, (uint)handler, (uint)irqa[i].handler);
+ vec, (uint) handler, (uint) irqa[i].handler);
}
irqa[i].handler = handler;
- irqa[i].arg = arg;
+ irqa[i].arg = arg;
#if defined(CONFIG_440)
- if( vec > 31 )
- mtdcr(uic1er, mfdcr(uic1er) | (0x80000000 >> i));
+#if defined(CONFIG_440_GX)
+ if ((vec > 31) && (vec < 64))
+ mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
+ else if (vec > 63)
+ mtdcr (uic2er, mfdcr (uic2er) | (0x80000000 >> i));
+ else
+#endif /* CONFIG_440_GX */
+ if (vec > 31)
+ mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else
#endif
- mtdcr(uicer, mfdcr(uicer) | (0x80000000 >> i));
+ mtdcr (uicer, mfdcr (uicer) | (0x80000000 >> i));
#if 0
printf ("Install interrupt for vector %d ==> %p\n", vec, handler);
#endif
}
-void
-irq_free_handler(int vec)
+void irq_free_handler (int vec)
{
struct irq_action *irqa = irq_vecs;
- int i = vec;
+ int i = vec;
#if defined(CONFIG_440)
+#if defined(CONFIG_440_GX)
+ if ((vec > 31) && (vec < 64)) {
+ irqa = irq_vecs1;
+ i = vec - 32;
+ } else if (vec > 63) {
+ irqa = irq_vecs2;
+ i = vec - 64;
+ }
+#endif /* CONFIG_440_GX */
if (vec > 31) {
irqa = irq_vecs1;
i = vec - 32;
#endif
#if defined(CONFIG_440)
+#if defined(CONFIG_440_GX)
+ if ((vec > 31) && (vec < 64))
+ mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
+ else if (vec > 63)
+ mtdcr (uic2er, mfdcr (uic2er) & ~(0x80000000 >> i));
+ else
+#endif /* CONFIG_440_GX */
if (vec > 31)
- mtdcr(uic1er, mfdcr(uic1er) & ~(0x80000000 >> i));
+ mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else
#endif
- mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> i));
+ mtdcr (uicer, mfdcr (uicer) & ~(0x80000000 >> i));
irqa[i].handler = NULL;
- irqa[i].arg = NULL;
+ irqa[i].arg = NULL;
}
/****************************************************************************/
printf ("\nUIC 1\n");
printf ("Nr Routine Arg Count\n");
- for (vec=0; vec<32; vec++)
- {
+ for (vec=0; vec<32; vec++) {
if (irq_vecs1[vec].handler != NULL)
printf ("%02d %08lx %08lx %d\n",
vec+31, (ulong)irq_vecs1[vec].handler,
}
printf("\n");
#endif
- return 0;
-}
+#if defined(CONFIG_440_GX)
+ printf ("\nUIC 2\n");
+ printf ("Nr Routine Arg Count\n");
+ for (vec=0; vec<32; vec++) {
+ if (irq_vecs2[vec].handler != NULL)
+ printf ("%02d %08lx %08lx %d\n",
+ vec+63, (ulong)irq_vecs2[vec].handler,
+ (ulong)irq_vecs2[vec].arg, irq_vecs2[vec].count);
+ }
+ printf("\n");
+#endif
+
+ return 0;
+}
#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
#include <405_mal.h>
#include <miiphy.h>
-#if defined(CONFIG_405GP) || defined(CONFIG_440) || defined(CONFIG_405EP)
-
+#if (defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440)) \
+ && !defined (CONFIG_NET_MULTI)
/***********************************************************/
/* Dump out to the screen PHY regs */
--- /dev/null
+/*-----------------------------------------------------------------------------+
+ |
+ | This source code has been made available to you by IBM on an AS-IS
+ | basis. Anyone receiving this source is licensed under IBM
+ | copyrights to use it in any way he or she deems fit, including
+ | copying it, modifying it, compiling it, and redistributing it either
+ | with or without modifications. No license under IBM patents or
+ | patent applications is to be implied by the copyright license.
+ |
+ | Any user of this software should understand that IBM cannot provide
+ | technical support for this software and will not be responsible for
+ | any consequences resulting from the use of this software.
+ |
+ | Any person who transfers this source code or any derivative work
+ | must include the IBM copyright notice, this paragraph, and the
+ | preceding two paragraphs in the transferred software.
+ |
+ | COPYRIGHT I B M CORPORATION 1995
+ | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ +-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------+
+ |
+ | File Name: miiphy.c
+ |
+ | Function: This module has utilities for accessing the MII PHY through
+ | the EMAC3 macro.
+ |
+ | Author: Mark Wisner
+ |
+ | Change Activity-
+ |
+ | Date Description of Change BY
+ | --------- --------------------- ---
+ | 05-May-99 Created MKW
+ | 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
+ | better match OPB speed. Also modified delay times. JWB
+ | 29-Jul-99 Added Full duplex support MKW
+ | 24-Aug-99 Removed printf from dp83843_duplex() JWB
+ | 19-Jul-00 Ported to esd cpci405 sr
+ | 23-Dec-03 Ported from miiphy.c to 440GX Travis Sawyer TBS
+ | <travis.sawyer@sandburst.com>
+ |
+ +-----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <440gx_enet.h>
+#include <405_mal.h>
+#include <miiphy.h>
+
+#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
+
+
+/***********************************************************/
+/* Dump out to the screen PHY regs */
+/***********************************************************/
+
+void miiphy_dump (unsigned char addr)
+{
+ unsigned long i;
+ unsigned short data;
+
+
+ for (i = 0; i < 0x1A; i++) {
+ if (miiphy_read (addr, i, &data)) {
+ printf ("read error for reg %lx\n", i);
+ return;
+ }
+ printf ("Phy reg %lx ==> %4x\n", i, data);
+
+ /* jump to the next set of regs */
+ if (i == 0x07)
+ i = 0x0f;
+
+ } /* end for loop */
+} /* end dump */
+
+
+/***********************************************************/
+/* (Re)start autonegotiation */
+/***********************************************************/
+int phy_setup_aneg (unsigned char addr)
+{
+ unsigned short ctl, adv;
+
+ /* Setup standard advertise */
+ miiphy_read (addr, PHY_ANAR, &adv);
+ adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
+ PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
+ PHY_ANLPAR_10);
+ miiphy_write (addr, PHY_ANAR, adv);
+
+ /* Start/Restart aneg */
+ miiphy_read (addr, PHY_BMCR, &ctl);
+ ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write (addr, PHY_BMCR, ctl);
+
+ return 0;
+}
+
+
+/***********************************************************/
+/* read a phy reg and return the value with a rc */
+/***********************************************************/
+unsigned int miiphy_getemac_offset (void)
+{
+ unsigned long zmii;
+ unsigned long eoffset;
+
+ /* Need to find out which mdi port we're using */
+ zmii = in32 (ZMII_FER);
+
+ if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) {
+ /* using port 0 */
+ eoffset = 0;
+ } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1))) {
+ /* using port 1 */
+ eoffset = 0x100;
+ } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2))) {
+ /* using port 2 */
+ eoffset = 0x400;
+ } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3))) {
+ /* using port 3 */
+ eoffset = 0x600;
+ } else {
+ /* None of the mdi ports are enabled! */
+ /* enable port 0 */
+ zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
+ out32 (ZMII_FER, zmii);
+ eoffset = 0;
+ /* need to soft reset port 0 */
+ zmii = in32 (EMAC_M0);
+ zmii |= EMAC_M0_SRST;
+ out32 (EMAC_M0, zmii);
+ }
+
+ return (eoffset);
+
+}
+
+
+int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ unsigned long sta_reg; /* STA scratch area */
+ unsigned long i;
+ unsigned long emac_reg;
+
+
+ emac_reg = miiphy_getemac_offset ();
+ /* see if it is ready for 1000 nsec */
+ i = 0;
+
+ /* see if it is ready for sec */
+ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
+ udelay (7);
+ if (i > 5) {
+#if 0
+ printf ("read err 1\n");
+#endif
+ return -1;
+ }
+ i++;
+ }
+ sta_reg = reg; /* reg address */
+ /* set clock (50Mhz) and read flags */
+#if defined(CONFIG_440_GX)
+ sta_reg |= EMAC_STACR_READ;
+#else
+ sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
+#endif
+
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440_GX)
+ sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
+#endif
+ sta_reg = sta_reg | (addr << 5); /* Phy address */
+
+ out32 (EMAC_STACR + emac_reg, sta_reg);
+#if 0 /* test-only */
+ printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
+#endif
+
+ sta_reg = in32 (EMAC_STACR + emac_reg);
+ i = 0;
+ while ((sta_reg & EMAC_STACR_OC) == 0) {
+ udelay (7);
+ if (i > 5) {
+ return -1;
+ }
+ i++;
+ sta_reg = in32 (EMAC_STACR + emac_reg);
+ }
+ if ((sta_reg & EMAC_STACR_PHYE) != 0) {
+ return -1;
+ }
+
+ *value = *(short *) (&sta_reg);
+ return 0;
+
+
+} /* phy_read */
+
+
+/***********************************************************/
+/* write a phy reg and return the value with a rc */
+/***********************************************************/
+
+int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
+{
+ unsigned long sta_reg; /* STA scratch area */
+ unsigned long i;
+ unsigned long emac_reg;
+
+ emac_reg = miiphy_getemac_offset ();
+ /* see if it is ready for 1000 nsec */
+ i = 0;
+
+ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
+ if (i > 5)
+ return -1;
+ udelay (7);
+ i++;
+ }
+ sta_reg = 0;
+ sta_reg = reg; /* reg address */
+ /* set clock (50Mhz) and read flags */
+#if defined(CONFIG_440_GX)
+ sta_reg |= EMAC_STACR_WRITE;
+#else
+ sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
+#endif
+
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440_GX)
+ sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
+#endif
+ sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */
+ memcpy (&sta_reg, &value, 2); /* put in data */
+
+ out32 (EMAC_STACR + emac_reg, sta_reg);
+
+ /* wait for completion */
+ i = 0;
+ sta_reg = in32 (EMAC_STACR + emac_reg);
+ while ((sta_reg & EMAC_STACR_OC) == 0) {
+ udelay (7);
+ if (i > 5)
+ return -1;
+ i++;
+ sta_reg = in32 (EMAC_STACR + emac_reg);
+ }
+
+ if ((sta_reg & EMAC_STACR_PHYE) != 0)
+ return -1;
+ return 0;
+
+} /* phy_write */
+
+#endif /* CONFIG_405GP */
#if defined(CONFIG_440)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#if defined(CONFIG_440_GX)
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#else
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
+#endif /* CONFIG_440_GX */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
+#if defined(CONFIG_440_GX)
+#define UART0_SDR sdr_uart1
+#define UART1_SDR sdr_uart0
+#endif /* CONFIG_440_GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
+#if defined(CONFIG_440_GX)
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
+#endif /* CONFIG_440_GX */
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
unsigned long tmp;
#endif
+#if defined(CONFIG_440_GX)
+ mfsdr(UART0_SDR,reg);
+ reg &= ~CR0_MASK;
+#else
reg = mfdcr(cntrl0) & ~CR0_MASK;
+#endif /* CONFIG_440_GX */
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
+#if defined(CONFIG_440_GX)
+ reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
+ mtsdr (UART0_SDR,reg);
+#else
reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
mtdcr (cntrl0, reg);
-
+#endif
out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
#elif defined(CONFIG_440)
+#if !defined(CONFIG_440_GX)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
}
+#else
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long temp1;
+ unsigned long lfdiv;
+ unsigned long m;
+
+
+ /* Extract configured divisors */
+ mfsdr( sdr_sdstp0,strp0 );
+ mfsdr( sdr_sdstp1,strp1 );
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
+ sysInfo->pllFwdDivA = temp ? temp : 16 ;
+ temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+ temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
+ lfdiv = temp1 ? temp1 : 64;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
+ if (!temp)
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+
+}
+#endif
ulong get_OPB_freq (void)
{
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-
+#if defined (CONFIG_440_GX) /* NOTE: 440GX adds machine check status regs */
+ mtspr mcsrr0,r0
+ mtspr mcsrr1,r0
+ mfspr r1, mcsr
+ mtspr mcsr,r1
+#endif
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
mtspr tcr,r0 /* disable all */
mtspr esr,r0 /* clear exception syndrome register */
mtxer r0 /* clear integer exception register */
+#if !defined(CONFIG_440_GX)
lis r1,0x0002 /* set CE bit (Critical Exceptions) */
ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */
mtmsr r1 /* change MSR */
+#else
+ bl __440gx_msr_set
+ b __440gx_msr_continue
+
+__440gx_msr_set:
+ lis r1, 0x0002 /* set CE bit (Critical Exceptions) */
+ ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */
+ mtspr srr1,r1
+ mflr r1
+ mtspr srr0,r1
+ rfi
+__440gx_msr_continue:
+#endif
/*----------------------------------------------------------------*/
/* Debug setup -- some (not very good) ice's need an event*/
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
+#if defined (CONFIG_440_GX)
+ mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
+#endif
mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
li r2,0x7fff
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
+#if defined(CONFIG_440_GX)
+ ori r1,r1,0x0980 /* first 64k */
+ mtdcr isram0_sb0cr,r1
+ lis r1,0x8001
+ ori r1,r1,0x0980 /* second 64k */
+ mtdcr isram0_sb1cr,r1
+ lis r1, 0x8002
+ ori r1,r1, 0x0980 /* third 64k */
+ mtdcr isram0_sb2cr,r1
+ lis r1, 0x8003
+ ori r1,r1, 0x0980 /* fourth 64k */
+ mtdcr isram0_sb3cr,r1
+#else
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
+#endif
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
invalidate_dcache:
addi r6,0,0x0000 /* clear GPR 6 */
/* Do loop for # of dcache congruence classes. */
+#if defined(CONFIG_440_GX)
+ lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
+ ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
+#else
addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
+#endif
/* NOTE: dccci invalidates both */
mtctr r7 /* ways in the D cache */
..dcloop:
mtdccr r10
/* do loop for # of congruence classes. */
+#if defined(CONFIG_440_GX)
+ lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */
+ ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
+ lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
+ ori r11,r11,(CFG_DCACHE_SIZE / 2)@l /* D cache set size - 2 way sets */
+#else
addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */
+#endif
mtctr r10
addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */
add r11,r10,r11 /* add to get to other side of cache line */
--- /dev/null
+ XES XPedite1000 Board
+
+ Last Update: December 29, 2003
+=======================================================================
+
+This file contains some handy info regarding U-Boot and the XES
+XPedite1000 PPC440GX PrPMC board. See the README.ppc440 for additional
+information.
+
+
+SWITCH SETTINGS & JUMPERS
+==========================
+
+Jumpers selected for AMD29LV040B flash part as the boot flash.
+
+
+I2C Strap EEPROM & Environment Settings
+=======================================
+
+The XPedite1000 uses a single I2C eeprom for the 440 strappings and for
+the environment variables. The first page (256 bytes) contains the
+strappings and the 2 EMAC HW Ethernet addresses. Be careful not to
+change the 1st page of the EEPROM! Unpopulated jumper J560 can get you
+out of trouble as it disables the strapping read from EEPROM.
+
+I2C iprobe
+=====================
+
+The i2c utilities work and have been tested on Rev B. of the 440GX. See
+README.ebony for more information about i2c probing with the 440.
+
+
+GETTING OUT OF I2C TROUBLE
+===========================
+
+(Direct quote from README.ebony)
+If you're like me ... you may have screwed up your bootstrap serial
+eeprom ... or worse, your SPD eeprom when experimenting with the
+i2c commands. If so, here are some ideas on how to get out of
+trouble:
+
+Serial bootstrap eeprom corruption:
+-----------------------------------
+Power down the board and set the following straps:
+
+J560 - closed
+
+This will select the default sys0 and sys1 settings (the serial
+eeproms are not used). Then power up the board and fix the serial
+eeprom using the imm command. Here are the values I currently
+use:
+
+=> imd 50 0 10
+
+0000: 85 7d 42 06 07 80 11 00 00 00 00 00 00 00 00 00 .}B.............
+
+Once you have the eeproms set correctly change the
+J560 straps as you desire.
+
+
+PPC440GX Ethernet EMACs
+=======================
+
+The XES XPedite1000 uses emac 2 & 3 and ignores emac 0 & 1. PHYs are connected
+only to emac 2 & 3. The HW Ethernet addresses are read from the i2c eeprom and
+placed in the bd info structure for enet2addr and enet3addr. The ethernet driver
+senses that enetaddr and enet1addr are 0's and does not use them.
+
+As of this writing gigabit ethernet and the TCPIP acceleration hardware is not
+supported.
+
+
+Flash Support
+=============
+
+As of this writing, there is support for the 1/2mb boot flash only. User flash
+is not yet supported.
+
+
+Regards,
+--Travis
+<travis.sawyer@sandburst.com>
/* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */
/*----------------------------------------------------------------------------+
|
-| This source code has been made available to you by IBM on an AS-IS
-| basis. Anyone receiving this source is licensed under IBM
-| copyrights to use it in any way he or she deems fit, including
-| copying it, modifying it, compiling it, and redistributing it either
-| with or without modifications. No license under IBM patents or
-| patent applications is to be implied by the copyright license.
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
|
-| Any user of this software should understand that IBM cannot provide
-| technical support for this software and will not be responsible for
-| any consequences resulting from the use of this software.
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
|
-| Any person who transfers this source code or any derivative work
-| must include the IBM copyright notice, this paragraph, and the
-| preceding two paragraphs in the transferred software.
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
|
-| COPYRIGHT I B M CORPORATION 1999
-| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------+
|
-| File Name: mal.h
+| File Name: mal.h
|
-| Function: Header file for the MAL (MADMAL) macro on the 405GP.
+| Function: Header file for the MAL (MADMAL) macro on the 405GP.
|
-| Author: Mark Wisner
+| Author: Mark Wisner
|
| Change Activity-
|
-| Date Description of Change BY
-| --------- --------------------- ---
-| 29-Apr-99 Created MKW
+| Date Description of Change BY
+| --------- --------------------- ---
+| 29-Apr-99 Created MKW
|
+----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+| 17-Nov-03 Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+| Added register bit definitions to support multiple channels
++----------------------------------------------------------------------------*/
#ifndef _mal_h_
#define _mal_h_
/* MADMAL transmit and receive status/control bits */
#define MAL_TX_CTRL_READY 0x8000
#define MAL_TX_CTRL_WRAP 0x4000
-#define MAL_TX_CTRL_CM 0x2000
+#define MAL_TX_CTRL_CM 0x2000
#define MAL_TX_CTRL_LAST 0x1000
#define MAL_TX_CTRL_INTR 0x0400
#define MAL_CR_MMSR 0x80000000
#define MAL_CR_PLBP_1 0x00400000 /* lowsest is 00 */
#define MAL_CR_PLBP_2 0x00800000
-#define MAL_CR_PLBP_3 0x00C00000 /* highest */
+#define MAL_CR_PLBP_3 0x00C00000 /* highest */
#define MAL_CR_GA 0x00200000
#define MAL_CR_OA 0x00100000
#define MAL_CR_PLBLE 0x00080000
-#define MAL_CR_PLBLT_1 0x00040000
-#define MAL_CR_PLBLT_2 0x00020000
-#define MAL_CR_PLBLT_3 0x00010000
-#define MAL_CR_PLBLT_4 0x00008000
+#define MAL_CR_PLBLT_1 0x00040000
+#define MAL_CR_PLBLT_2 0x00020000
+#define MAL_CR_PLBLT_3 0x00010000
+#define MAL_CR_PLBLT_4 0x00008000
#define MAL_CR_PLBLT_DEFAULT 0x00078000 /* ????? */
#define MAL_CR_PLBB 0x00004000
#define MAL_CR_OPBBL 0x00000080
#define MAL_CR_LEA 0x00000002
#define MAL_CR_MSD 0x00000001
- /* Error Status Reg */
+ /* Error Status Reg */
#define MAL_ESR_EVB 0x80000000
#define MAL_ESR_CID 0x40000000
#define MAL_ESR_DE 0x00100000
#define MAL_ESR_OSE 0x00020000
#define MAL_ESR_PEIN 0x00010000
/* same bit position as the IER */
- /* VV VV */
+ /* VV VV */
#define MAL_ESR_DEI 0x00000010
#define MAL_ESR_ONEI 0x00000008
#define MAL_ESR_OTEI 0x00000004
#define MAL_ESR_OSEI 0x00000002
#define MAL_ESR_PBEI 0x00000001
- /* ^^ ^^ */
- /* Mal IER */
+ /* ^^ ^^ */
+ /* Mal IER */
#define MAL_IER_DE 0x00000010
#define MAL_IER_NE 0x00000008
#define MAL_IER_TE 0x00000004
#define MAL_IER_OPBE 0x00000002
#define MAL_IER_PLBE 0x00000001
+/* MAL Channel Active Set and Reset Registers */
+#define MAL_TXRX_CASR (0x80000000)
+
+#define MAL_TXRX_CASR_V(__x) (__x) /* Channel 0 shifts 0, channel 1 shifts 1, etc */
+
/* MAL Buffer Descriptor structure */
typedef struct {
- short ctrl; /* MAL / Commac status control bits */
- short data_len; /* Max length is 4K-1 (12 bits) */
- char *data_ptr; /* pointer to actual data buffer */
+ short ctrl; /* MAL / Commac status control bits */
+ short data_len; /* Max length is 4K-1 (12 bits) */
+ char *data_ptr; /* pointer to actual data buffer */
} mal_desc_t;
#endif
--- /dev/null
+/*----------------------------------------------------------------------------+
+|
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
+|
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
+|
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
+|
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
++----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+|
+| File Name: enetemac.h
+|
+| Function: Header file for the EMAC3 macro on the 405GP.
+|
+| Author: Mark Wisner
+|
+| Change Activity-
+|
+| Date Description of Change BY
+| --------- --------------------- ---
+| 29-Apr-99 Created MKW
+|
++----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+| 19-Nov-03 Travis Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+| ported to handle 440GP and 440GX multiple EMACs
++----------------------------------------------------------------------------*/
+
+#ifndef _emacgx_enet_h_
+#define _emacgx_enet_h_
+
+#if defined(CONFIG_440)
+#include <net.h>
+#include "405_mal.h"
+
+
+/*-----------------------------------------------------------------------------+
+| General enternet defines. 802 frames are not supported.
++-----------------------------------------------------------------------------*/
+#define ENET_ADDR_LENGTH 6
+#define ENET_ARPTYPE 0x806
+#define ARP_REQUEST 1
+#define ARP_REPLY 2
+#define ENET_IPTYPE 0x800
+#define ARP_CACHE_SIZE 5
+
+#define NUM_TX_BUFF 1
+#define NUM_RX_BUFF PKTBUFSRX
+
+struct enet_frame {
+ unsigned char dest_addr[ENET_ADDR_LENGTH];
+ unsigned char source_addr[ENET_ADDR_LENGTH];
+ unsigned short type;
+ unsigned char enet_data[1];
+};
+
+struct arp_entry {
+ unsigned long inet_address;
+ unsigned char mac_address[ENET_ADDR_LENGTH];
+ unsigned long valid;
+ unsigned long sec;
+ unsigned long nsec;
+};
+
+
+/* Statistic Areas */
+#define MAX_ERR_LOG 10
+
+typedef struct emac_stats_st{ /* Statistic Block */
+ int data_len_err;
+ int rx_frames;
+ int rx;
+ int rx_prot_err;
+ int int_err;
+ int pkts_tx;
+ int pkts_rx;
+ int pkts_handled;
+ short tx_err_log[MAX_ERR_LOG];
+ short rx_err_log[MAX_ERR_LOG];
+} EMAC_STATS_ST, *EMAC_STATS_PST;
+
+/* Structure containing variables used by the shared code (440gx_enet.c) */
+typedef struct emac_440gx_hw_st {
+ uint32_t hw_addr; /* EMAC offset */
+ uint32_t tah_addr; /* TAH offset */
+ uint32_t phy_id;
+ uint32_t phy_addr;
+ uint32_t original_fc;
+ uint32_t txcw;
+ uint32_t autoneg_failed;
+ uint32_t emac_ier;
+ volatile mal_desc_t *tx;
+ volatile mal_desc_t *rx;
+ bd_t *bis; /* for eth_init upon mal error */
+ mal_desc_t *alloc_tx_buf;
+ mal_desc_t *alloc_rx_buf;
+ char *txbuf_ptr;
+ uint16_t devnum;
+ int get_link_status;
+ int tbi_compatibility_en;
+ int tbi_compatibility_on;
+ int fc_send_xon;
+ int report_tx_early;
+ int first_init;
+ int tx_err_index;
+ int rx_err_index;
+ int rx_slot; /* MAL Receive Slot */
+ int rx_i_index; /* Receive Interrupt Queue Index */
+ int rx_u_index; /* Receive User Queue Index */
+ int tx_slot; /* MAL Transmit Slot */
+ int tx_i_index; /* Transmit Interrupt Queue Index */
+ int tx_u_index; /* Transmit User Queue Index */
+ int rx_ready[NUM_RX_BUFF]; /* Receive Ready Queue */
+ int tx_run[NUM_TX_BUFF]; /* Transmit Running Queue */
+ int is_receiving; /* sync with eth interrupt */
+ int print_speed; /* print speed message upon start */
+ EMAC_STATS_ST stats;
+} EMAC_440GX_HW_ST, *EMAC_440GX_HW_PST;
+
+
+#if defined(CONFIG_440_GX)
+#define EMAC_NUM_DEV 4
+#elif defined(CONFIG_440) && !defined(CONFIG_440_GX)
+#define EMAC_NUM_DEV 2
+#else
+#warning Bad configuration
+#endif
+
+
+/*ZMII Bridge Register addresses */
+#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
+#define ZMII_FER (ZMII_BASE)
+#define ZMII_SSR (ZMII_BASE + 4)
+#define ZMII_SMIISR (ZMII_BASE + 8)
+
+#define ZMII_RMII 0x22000000
+#define ZMII_MDI0 0x80000000
+
+/* ZMII FER Register Bit Definitions */
+#define ZMII_FER_MDI (0x8)
+#define ZMII_FER_SMII (0x4)
+#define ZMII_FER_RMII (0x2)
+#define ZMII_FER_MII (0x1)
+
+#define ZMII_FER_RSVD11 (0x00200000)
+#define ZMII_FER_RSVD10 (0x00100000)
+#define ZMII_FER_RSVD14_31 (0x0003FFFF)
+
+#define ZMII_FER_V(__x) (((3 - __x) * 4) + 16)
+
+
+/* ZMII Speed Selection Register Bit Definitions */
+#define ZMII_SSR_SCI (0x4)
+#define ZMII_SSR_FSS (0x2)
+#define ZMII_SSR_SP (0x1)
+#define ZMII_SSR_RSVD16_31 (0x0000FFFF)
+
+#define ZMII_SSR_V(__x) (((3 - __x) * 4) + 16)
+
+
+/* ZMII SMII Status Register Bit Definitions */
+#define ZMII_SMIISR_E1 (0x80)
+#define ZMII_SMIISR_EC (0x40)
+#define ZMII_SMIISR_EN (0x20)
+#define ZMII_SMIISR_EJ (0x10)
+#define ZMII_SMIISR_EL (0x08)
+#define ZMII_SMIISR_ED (0x04)
+#define ZMII_SMIISR_ES (0x02)
+#define ZMII_SMIISR_EF (0x01)
+
+#define ZMII_SMIISR_V(__x) ((3 - __x) * 8)
+
+/* RGMII Register Addresses */
+#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790)
+#define RGMII_FER (RGMII_BASE + 0x00)
+#define RGMII_SSR (RGMII_BASE + 0x04)
+
+/* RGMII Function Enable (FER) Register Bit Definitions */
+/* Note: for EMAC 2 and 3 only, 440GX only */
+#define RGMII_FER_DIS (0x00)
+#define RGMII_FER_RTBI (0x04)
+#define RGMII_FER_RGMII (0x05)
+#define RGMII_FER_TBI (0x06)
+#define RGMII_FER_GMII (0x07)
+
+#define RGMII_FER_V(__x) ((__x - 2) * 4)
+
+/* RGMII Speed Selection Register Bit Definitions */
+#define RGMII_SSR_SP_10MBPS (0x00)
+#define RGMII_SSR_SP_100MBPS (0x02)
+#define RGMII_SSR_SP_1000MBPS (0x04)
+
+#define RGMII_SSR_V(__x) ((__x -2) * 8)
+
+
+/*---------------------------------------------------------------------------+
+| TCP/IP Acceleration Hardware (TAH) 440GX Only
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440_GX)
+#define TAH_BASE (CFG_PERIPHERAL_BASE + 0x0B50)
+#define TAH_REVID (TAH_BASE + 0x0) /* Revision ID (RO)*/
+#define TAH_MR (TAH_BASE + 0x10) /* Mode Register (R/W) */
+#define TAH_SSR0 (TAH_BASE + 0x14) /* Segment Size Reg 0 (R/W) */
+#define TAH_SSR1 (TAH_BASE + 0x18) /* Segment Size Reg 1 (R/W) */
+#define TAH_SSR2 (TAH_BASE + 0x1C) /* Segment Size Reg 2 (R/W) */
+#define TAH_SSR3 (TAH_BASE + 0x20) /* Segment Size Reg 3 (R/W) */
+#define TAH_SSR4 (TAH_BASE + 0x24) /* Segment Size Reg 4 (R/W) */
+#define TAH_SSR5 (TAH_BASE + 0x28) /* Segment Size Reg 5 (R/W) */
+#define TAH_TSR (TAH_BASE + 0x2C) /* Transmit Status Register (RO) */
+
+
+/* TAH Revision */
+#define TAH_REV_RN_M (0x000FFF00) /* Revision Number */
+#define TAH_REV_BN_M (0x000000FF) /* Branch Revision Number */
+
+#define TAH_REV_RN_V (8)
+#define TAH_REV_BN_V (0)
+
+/* TAH Mode Register */
+#define TAH_MR_CVR (0x80000000) /* Checksum verification on RX */
+#define TAH_MR_SR (0x40000000) /* Software reset */
+#define TAH_MR_ST (0x3F000000) /* Send Threshold */
+#define TAH_MR_TFS (0x00E00000) /* Transmit FIFO size */
+#define TAH_MR_DTFP (0x00100000) /* Disable TX FIFO parity */
+#define TAH_MR_DIG (0x00080000) /* Disable interrupt generation */
+#define TAH_MR_RSVD (0x0007FFFF) /* Reserved */
+
+#define TAH_MR_ST_V (20)
+#define TAH_MR_TFS_V (17)
+
+#define TAH_MR_TFS_2K (0x1) /* Transmit FIFO size 2Kbyte */
+#define TAH_MR_TFS_4K (0x2) /* Transmit FIFO size 4Kbyte */
+#define TAH_MR_TFS_6K (0x3) /* Transmit FIFO size 6Kbyte */
+#define TAH_MR_TFS_8K (0x4) /* Transmit FIFO size 8Kbyte */
+#define TAH_MR_TFS_10K (0x5) /* Transmit FIFO size 10Kbyte (max)*/
+
+
+/* TAH Segment Size Registers 0:5 */
+#define TAH_SSR_RSVD0 (0xC0000000) /* Reserved */
+#define TAH_SSR_SS (0x3FFE0000) /* Segment size in multiples of 2 */
+#define TAH_SSR_RSVD1 (0x0001FFFF) /* Reserved */
+
+/* TAH Transmit Status Register */
+#define TAH_TSR_TFTS (0x80000000) /* Transmit FIFO too small */
+#define TAH_TSR_UH (0x40000000) /* Unrecognized header */
+#define TAH_TSR_NIPF (0x20000000) /* Not IPv4 */
+#define TAH_TSR_IPOP (0x10000000) /* IP option present */
+#define TAH_TSR_NISF (0x08000000) /* No IEEE SNAP format */
+#define TAH_TSR_ILTS (0x04000000) /* IP length too short */
+#define TAH_TSR_IPFP (0x02000000) /* IP fragment present */
+#define TAH_TSR_UP (0x01000000) /* Unsupported protocol */
+#define TAH_TSR_TFP (0x00800000) /* TCP flags present */
+#define TAH_TSR_SUDP (0x00400000) /* Segmentation for UDP */
+#define TAH_TSR_DLM (0x00200000) /* Data length mismatch */
+#define TAH_TSR_SIEEE (0x00100000) /* Segmentation for IEEE */
+#define TAH_TSR_TFPE (0x00080000) /* Transmit FIFO parity error */
+#define TAH_TSR_SSTS (0x00040000) /* Segment size too small */
+#define TAH_TSR_RSVD (0x0003FFFF) /* Reserved */
+#endif /* CONFIG_440_GX */
+
+
+/* Ethernet MAC Regsiter Addresses */
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+
+#define EMAC_M0 (EMAC_BASE)
+#define EMAC_M1 (EMAC_BASE + 4)
+#define EMAC_TXM0 (EMAC_BASE + 8)
+#define EMAC_TXM1 (EMAC_BASE + 12)
+#define EMAC_RXM (EMAC_BASE + 16)
+#define EMAC_ISR (EMAC_BASE + 20)
+#define EMAC_IER (EMAC_BASE + 24)
+#define EMAC_IAH (EMAC_BASE + 28)
+#define EMAC_IAL (EMAC_BASE + 32)
+#define EMAC_VLAN_TPID_REG (EMAC_BASE + 36)
+#define EMAC_VLAN_TCI_REG (EMAC_BASE + 40)
+#define EMAC_PAUSE_TIME_REG (EMAC_BASE + 44)
+#define EMAC_IND_HASH_1 (EMAC_BASE + 48)
+#define EMAC_IND_HASH_2 (EMAC_BASE + 52)
+#define EMAC_IND_HASH_3 (EMAC_BASE + 56)
+#define EMAC_IND_HASH_4 (EMAC_BASE + 60)
+#define EMAC_GRP_HASH_1 (EMAC_BASE + 64)
+#define EMAC_GRP_HASH_2 (EMAC_BASE + 68)
+#define EMAC_GRP_HASH_3 (EMAC_BASE + 72)
+#define EMAC_GRP_HASH_4 (EMAC_BASE + 76)
+#define EMAC_LST_SRC_LOW (EMAC_BASE + 80)
+#define EMAC_LST_SRC_HI (EMAC_BASE + 84)
+#define EMAC_I_FRAME_GAP_REG (EMAC_BASE + 88)
+#define EMAC_STACR (EMAC_BASE + 92)
+#define EMAC_TRTR (EMAC_BASE + 96)
+#define EMAC_RX_HI_LO_WMARK (EMAC_BASE + 100)
+
+/* bit definitions */
+/* MODE REG 0 */
+#define EMAC_M0_RXI (0x80000000)
+#define EMAC_M0_TXI (0x40000000)
+#define EMAC_M0_SRST (0x20000000)
+#define EMAC_M0_TXE (0x10000000)
+#define EMAC_M0_RXE (0x08000000)
+#define EMAC_M0_WKE (0x04000000)
+
+/* MODE Reg 1 */
+#define EMAC_M1_FDE (0x80000000)
+#define EMAC_M1_ILE (0x40000000)
+#define EMAC_M1_VLE (0x20000000)
+#define EMAC_M1_EIFC (0x10000000)
+#define EMAC_M1_APP (0x08000000)
+#define EMAC_M1_RSVD (0x06000000)
+#define EMAC_M1_IST (0x01000000)
+#define EMAC_M1_MF_1000MBPS (0x00800000) /* 0's for 10MBPS */
+#define EMAC_M1_MF_100MBPS (0x00400000)
+#define EMAC_M1_RFS_16K (0x00280000) /* ~4k for 512 byte */
+#define EMAC_M1_RFS_8K (0x00200000) /* ~4k for 512 byte */
+#define EMAC_M1_RFS_4K (0x00180000) /* ~4k for 512 byte */
+#define EMAC_M1_RFS_2K (0x00100000)
+#define EMAC_M1_RFS_1K (0x00080000)
+#define EMAC_M1_TX_FIFO_16K (0x00050000) /* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_8K (0x00040000)
+#define EMAC_M1_TX_FIFO_4K (0x00030000)
+#define EMAC_M1_TX_FIFO_2K (0x00020000)
+#define EMAC_M1_TX_FIFO_1K (0x00010000)
+#define EMAC_M1_TR_MULTI (0x00008000) /* 0'x for single packet */
+#define EMAC_M1_MWSW (0x00007000)
+#define EMAC_M1_JUMBO_ENABLE (0x00000800)
+#define EMAC_M1_IPPA (0x000007c0)
+#define EMAC_M1_OBCI_GT100 (0x00000020)
+#define EMAC_M1_OBCI_100 (0x00000018)
+#define EMAC_M1_OBCI_83 (0x00000010)
+#define EMAC_M1_OBCI_66 (0x00000008)
+#define EMAC_M1_RSVD1 (0x00000007)
+/* Transmit Mode Register 0 */
+#define EMAC_TXM0_GNP0 (0x80000000)
+#define EMAC_TXM0_GNP1 (0x40000000)
+#define EMAC_TXM0_GNPD (0x20000000)
+#define EMAC_TXM0_FC (0x10000000)
+
+/* Receive Mode Register */
+#define EMAC_RMR_SP (0x80000000)
+#define EMAC_RMR_SFCS (0x40000000)
+#define EMAC_RMR_ARRP (0x20000000)
+#define EMAC_RMR_ARP (0x10000000)
+#define EMAC_RMR_AROP (0x08000000)
+#define EMAC_RMR_ARPI (0x04000000)
+#define EMAC_RMR_PPP (0x02000000)
+#define EMAC_RMR_PME (0x01000000)
+#define EMAC_RMR_PMME (0x00800000)
+#define EMAC_RMR_IAE (0x00400000)
+#define EMAC_RMR_MIAE (0x00200000)
+#define EMAC_RMR_BAE (0x00100000)
+#define EMAC_RMR_MAE (0x00080000)
+
+/* Interrupt Status & enable Regs */
+#define EMAC_ISR_OVR (0x02000000)
+#define EMAC_ISR_PP (0x01000000)
+#define EMAC_ISR_BP (0x00800000)
+#define EMAC_ISR_RP (0x00400000)
+#define EMAC_ISR_SE (0x00200000)
+#define EMAC_ISR_SYE (0x00100000)
+#define EMAC_ISR_BFCS (0x00080000)
+#define EMAC_ISR_PTLE (0x00040000)
+#define EMAC_ISR_ORE (0x00020000)
+#define EMAC_ISR_IRE (0x00010000)
+#define EMAC_ISR_DBDM (0x00000200)
+#define EMAC_ISR_DB0 (0x00000100)
+#define EMAC_ISR_SE0 (0x00000080)
+#define EMAC_ISR_TE0 (0x00000040)
+#define EMAC_ISR_DB1 (0x00000020)
+#define EMAC_ISR_SE1 (0x00000010)
+#define EMAC_ISR_TE1 (0x00000008)
+#define EMAC_ISR_MOS (0x00000002)
+#define EMAC_ISR_MOF (0x00000001)
+
+
+/* STA CONTROL REG */
+#define EMAC_STACR_OC (0x00008000)
+#define EMAC_STACR_PHYE (0x00004000)
+#define EMAC_STACR_WRITE (0x00002000)
+#define EMAC_STACR_READ (0x00001000)
+#define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */
+#define EMAC_STACR_CLK_66MHZ (0x00000400)
+#define EMAC_STACR_CLK_100MHZ (0x00000C00)
+
+/* Transmit Request Threshold Register */
+#define EMAC_TRTR_256 (0x18000000) /* 0's for 64 Bytes */
+#define EMAC_TRTR_192 (0x10000000)
+#define EMAC_TRTR_128 (0x01000000)
+
+/* the follwing defines are for the MadMAL status and control registers. */
+/* For bits 0..5 look at the mal.h file */
+#define EMAC_TX_CTRL_GFCS (0x0200)
+#define EMAC_TX_CTRL_GP (0x0100)
+#define EMAC_TX_CTRL_ISA (0x0080)
+#define EMAC_TX_CTRL_RSA (0x0040)
+#define EMAC_TX_CTRL_IVT (0x0020)
+#define EMAC_TX_CTRL_RVT (0x0010)
+
+#define EMAC_TX_CTRL_DEFAULT (EMAC_TX_CTRL_GFCS |EMAC_TX_CTRL_GP)
+
+#define EMAC_TX_ST_BFCS (0x0200)
+#define EMAC_TX_ST_BPP (0x0100)
+#define EMAC_TX_ST_LCS (0x0080)
+#define EMAC_TX_ST_ED (0x0040)
+#define EMAC_TX_ST_EC (0x0020)
+#define EMAC_TX_ST_LC (0x0010)
+#define EMAC_TX_ST_MC (0x0008)
+#define EMAC_TX_ST_SC (0x0004)
+#define EMAC_TX_ST_UR (0x0002)
+#define EMAC_TX_ST_SQE (0x0001)
+
+#define EMAC_TX_ST_DEFAULT (0x03F3)
+
+
+/* madmal receive status / Control bits */
+
+#define EMAC_RX_ST_OE (0x0200)
+#define EMAC_RX_ST_PP (0x0100)
+#define EMAC_RX_ST_BP (0x0080)
+#define EMAC_RX_ST_RP (0x0040)
+#define EMAC_RX_ST_SE (0x0020)
+#define EMAC_RX_ST_AE (0x0010)
+#define EMAC_RX_ST_BFCS (0x0008)
+#define EMAC_RX_ST_PTL (0x0004)
+#define EMAC_RX_ST_ORE (0x0002)
+#define EMAC_RX_ST_IRE (0x0001)
+/* all the errors we care about */
+#define EMAC_RX_ERRORS (0x03FF)
+
+#endif /* CONFIG_440 */
+#endif /* _enetLib_h_ */
#define PVR_405GPR_RB 0x50910951
#define PVR_440GP_RB 0x40120440
#define PVR_440GP_RC 0x40120481
+#define PVR_440GX_RA 0x51B21850
+#define PVR_440GX_RB 0x51B21851
#define PVR_405EP_RB 0x51210950
#define PVR_601 0x00010000
#define PVR_602 0x00050000
defined(CONFIG_SXNI855T) || \
defined(CONFIG_SVM_SC8xx) || \
defined(CONFIG_MPC8540ADS) || \
- defined(CONFIG_MPC8560ADS)
+ defined(CONFIG_MPC8560ADS) || \
+ defined(CONFIG_440_GX)
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
#if defined(CFG_GT_6426x) || defined(CONFIG_SVM_SC8xx) || \
- defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS)
+ defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || \
+ defined(CONFIG_440_GX)
/* third onboard ethernet port */
unsigned char bi_enet2addr[6];
#endif
+#if defined(CONFIG_440_GX)
+ unsigned char bi_enet3addr[6];
+#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999,
0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3,
0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA,
- 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
+ 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
};
unsigned char bmp_logo_bitmap[] = {
void board_ether_init (void);
#endif
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_MBX) || defined(CONFIG_IAD210)
+#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_MBX) || \
+ defined(CONFIG_IAD210) || defined(CONFIG_XPEDITE1K)
void board_get_enetaddr (uchar *addr);
#endif
--- /dev/null
+/*
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * config for XPedite1000 from XES Inc.
+ * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
+ * (C) Copyright 2003 Sandburst Corporation
+ * board/config_EBONY.h - configuration for IBM 440GP Ref (Ebony)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_440 1
+#define CONFIG_440_GX 1 /* 440 GX */
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+#undef CFG_DRAM_TEST /* Disable-takes long time! */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_RTC | \
+ CFG_POST_I2C)
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+
+#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700)
+
+#define USR_LED0 0x00000080
+#define USR_LED1 0x00000100
+#define USR_LED2 0x00000200
+#define USR_LED3 0x00000400
+
+#ifndef __ASSEMBLY__
+extern unsigned long in32(unsigned int);
+extern void out32(unsigned int, unsigned long);
+
+#define LED0_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED0))
+#define LED1_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED1))
+#define LED2_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED2))
+#define LED3_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED3))
+
+#define LED0_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED0))
+#define LED1_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED1))
+#define LED2_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED2))
+#define LED3_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED3))
+#endif
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_BAUDRATE 9600
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
+ * The DS1743 code assumes this condition (i.e. -- it assumes the base
+ * address for the RTC registers is:
+ *
+ * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *
+ *----------------------------------------------------------------------*/
+/* TBS: Xpedite 1000 has STMicro M41T00 via IIC */
+#define CONFIG_RTC_M41T11 1
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 2000
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 8 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
+#define CONFIG_VERY_BIG_RAM 1
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7f
+#define CFG_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69} /* Don't probe these addrs */
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_SIZE 0x100 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x100
+#define CFG_I2C_EEPROM_ADDR 0x50 /* this is actually the second page of the eeprom */
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTARGS "root=/dev/hda1 "
+#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
+#define CONFIG_BOOTDELAY -1 /* disable autoboot */
+#define CONFIG_BAUDRATE 9600
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address phy0 not populated */
+#define CONFIG_PHY1_ADDR 1 /* PHY address phy1 not populated */
+#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
+#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DATE | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_PING | \
+ CFG_CMD_ELF | \
+ CFG_CMD_MII | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_FAT )
+
+/* CFG_CMD_DHCP | \ */
+/* CFG_CMD_KGDB | \ */
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 440GX CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
/*----------------------------------------------------------------------------+
|
-| This source code has been made available to you by IBM on an AS-IS
-| basis. Anyone receiving this source is licensed under IBM
-| copyrights to use it in any way he or she deems fit, including
-| copying it, modifying it, compiling it, and redistributing it either
-| with or without modifications. No license under IBM patents or
-| patent applications is to be implied by the copyright license.
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
|
-| Any user of this software should understand that IBM cannot provide
-| technical support for this software and will not be responsible for
-| any consequences resulting from the use of this software.
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
|
-| Any person who transfers this source code or any derivative work
-| must include the IBM copyright notice, this paragraph, and the
-| preceding two paragraphs in the transferred software.
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
|
-| COPYRIGHT I B M CORPORATION 1999
-| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
-#ifndef __PPC440_H__
+#ifndef __PPC440_H__
#define __PPC440_H__
/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
- #define dec 0x016 /* decrementer */
- #define srr0 0x01a /* save/restore register 0 */
- #define srr1 0x01b /* save/restore register 1 */
- #define pid 0x030 /* process id */
- #define decar 0x036 /* decrementer auto-reload */
- #define csrr0 0x03a /* critical save/restore register 0 */
- #define csrr1 0x03b /* critical save/restore register 1 */
- #define dear 0x03d /* data exception address register */
- #define esr 0x03e /* exception syndrome register */
- #define ivpr 0x03f /* interrupt prefix register */
- #define usprg0 0x100 /* user special purpose register general 0 */
- #define usprg1 0x110 /* user special purpose register general 1 */
- #define sprg1 0x111 /* special purpose register general 1 */
- #define sprg2 0x112 /* special purpose register general 2 */
- #define sprg3 0x113 /* special purpose register general 3 */
- #define sprg4 0x114 /* special purpose register general 4 */
- #define sprg5 0x115 /* special purpose register general 5 */
- #define sprg6 0x116 /* special purpose register general 6 */
- #define sprg7 0x117 /* special purpose register general 7 */
- #define tbl 0x11c /* time base lower (supervisor)*/
- #define tbu 0x11d /* time base upper (supervisor)*/
- #define pir 0x11e /* processor id register */
- /*#define pvr 0x11f processor version register */
- #define dbsr 0x130 /* debug status register */
- #define dbcr0 0x134 /* debug control register 0 */
- #define dbcr1 0x135 /* debug control register 1 */
- #define dbcr2 0x136 /* debug control register 2 */
- #define iac1 0x138 /* instruction address compare 1 */
- #define iac2 0x139 /* instruction address compare 2 */
- #define iac3 0x13a /* instruction address compare 3 */
- #define iac4 0x13b /* instruction address compare 4 */
- #define dac1 0x13c /* data address compare 1 */
- #define dac2 0x13d /* data address compare 2 */
- #define dvc1 0x13e /* data value compare 1 */
- #define dvc2 0x13f /* data value compare 2 */
- #define tsr 0x150 /* timer status register */
- #define tcr 0x154 /* timer control register */
- #define ivor0 0x190 /* interrupt vector offset register 0 */
- #define ivor1 0x191 /* interrupt vector offset register 1 */
- #define ivor2 0x192 /* interrupt vector offset register 2 */
- #define ivor3 0x193 /* interrupt vector offset register 3 */
- #define ivor4 0x194 /* interrupt vector offset register 4 */
- #define ivor5 0x195 /* interrupt vector offset register 5 */
- #define ivor6 0x196 /* interrupt vector offset register 6 */
- #define ivor7 0x197 /* interrupt vector offset register 7 */
- #define ivor8 0x198 /* interrupt vector offset register 8 */
- #define ivor9 0x199 /* interrupt vector offset register 9 */
- #define ivor10 0x19a /* interrupt vector offset register 10 */
- #define ivor11 0x19b /* interrupt vector offset register 11 */
- #define ivor12 0x19c /* interrupt vector offset register 12 */
- #define ivor13 0x19d /* interrupt vector offset register 13 */
- #define ivor14 0x19e /* interrupt vector offset register 14 */
- #define ivor15 0x19f /* interrupt vector offset register 15 */
- #define inv0 0x370 /* instruction cache normal victim 0 */
- #define inv1 0x371 /* instruction cache normal victim 1 */
- #define inv2 0x372 /* instruction cache normal victim 2 */
- #define inv3 0x373 /* instruction cache normal victim 3 */
- #define itv0 0x374 /* instruction cache transient victim 0 */
- #define itv1 0x375 /* instruction cache transient victim 1 */
- #define itv2 0x376 /* instruction cache transient victim 2 */
- #define itv3 0x377 /* instruction cache transient victim 3 */
- #define dnv0 0x390 /* data cache normal victim 0 */
- #define dnv1 0x391 /* data cache normal victim 1 */
- #define dnv2 0x392 /* data cache normal victim 2 */
- #define dnv3 0x393 /* data cache normal victim 3 */
- #define dtv0 0x394 /* data cache transient victim 0 */
- #define dtv1 0x395 /* data cache transient victim 1 */
- #define dtv2 0x396 /* data cache transient victim 2 */
- #define dtv3 0x397 /* data cache transient victim 3 */
- #define dvlim 0x398 /* data cache victim limit */
- #define ivlim 0x399 /* instruction cache victim limit */
- #define rstcfg 0x39b /* reset configuration */
- #define dcdbtrl 0x39c /* data cache debug tag register low */
- #define dcdbtrh 0x39d /* data cache debug tag register high */
- #define icdbtrl 0x39e /* instruction cache debug tag register low */
- #define icdbtrh 0x39f /* instruction cache debug tag register high */
- #define mmucr 0x3b2 /* mmu control register */
- #define ccr0 0x3b3 /* core configuration register 0 */
- #define icdbdr 0x3d3 /* instruction cache debug data register */
- #define dbdr 0x3f3 /* debug data register */
+#define dec 0x016 /* decrementer */
+#define srr0 0x01a /* save/restore register 0 */
+#define srr1 0x01b /* save/restore register 1 */
+#define pid 0x030 /* process id */
+#define decar 0x036 /* decrementer auto-reload */
+#define csrr0 0x03a /* critical save/restore register 0 */
+#define csrr1 0x03b /* critical save/restore register 1 */
+#define dear 0x03d /* data exception address register */
+#define esr 0x03e /* exception syndrome register */
+#define ivpr 0x03f /* interrupt prefix register */
+#define usprg0 0x100 /* user special purpose register general 0 */
+#define usprg1 0x110 /* user special purpose register general 1 */
+#define sprg1 0x111 /* special purpose register general 1 */
+#define sprg2 0x112 /* special purpose register general 2 */
+#define sprg3 0x113 /* special purpose register general 3 */
+#define sprg4 0x114 /* special purpose register general 4 */
+#define sprg5 0x115 /* special purpose register general 5 */
+#define sprg6 0x116 /* special purpose register general 6 */
+#define sprg7 0x117 /* special purpose register general 7 */
+#define tbl 0x11c /* time base lower (supervisor)*/
+#define tbu 0x11d /* time base upper (supervisor)*/
+#define pir 0x11e /* processor id register */
+/*#define pvr 0x11f processor version register */
+#define dbsr 0x130 /* debug status register */
+#define dbcr0 0x134 /* debug control register 0 */
+#define dbcr1 0x135 /* debug control register 1 */
+#define dbcr2 0x136 /* debug control register 2 */
+#define iac1 0x138 /* instruction address compare 1 */
+#define iac2 0x139 /* instruction address compare 2 */
+#define iac3 0x13a /* instruction address compare 3 */
+#define iac4 0x13b /* instruction address compare 4 */
+#define dac1 0x13c /* data address compare 1 */
+#define dac2 0x13d /* data address compare 2 */
+#define dvc1 0x13e /* data value compare 1 */
+#define dvc2 0x13f /* data value compare 2 */
+#define tsr 0x150 /* timer status register */
+#define tcr 0x154 /* timer control register */
+#define ivor0 0x190 /* interrupt vector offset register 0 */
+#define ivor1 0x191 /* interrupt vector offset register 1 */
+#define ivor2 0x192 /* interrupt vector offset register 2 */
+#define ivor3 0x193 /* interrupt vector offset register 3 */
+#define ivor4 0x194 /* interrupt vector offset register 4 */
+#define ivor5 0x195 /* interrupt vector offset register 5 */
+#define ivor6 0x196 /* interrupt vector offset register 6 */
+#define ivor7 0x197 /* interrupt vector offset register 7 */
+#define ivor8 0x198 /* interrupt vector offset register 8 */
+#define ivor9 0x199 /* interrupt vector offset register 9 */
+#define ivor10 0x19a /* interrupt vector offset register 10 */
+#define ivor11 0x19b /* interrupt vector offset register 11 */
+#define ivor12 0x19c /* interrupt vector offset register 12 */
+#define ivor13 0x19d /* interrupt vector offset register 13 */
+#define ivor14 0x19e /* interrupt vector offset register 14 */
+#define ivor15 0x19f /* interrupt vector offset register 15 */
+#if defined(CONFIG_440_GX)
+#define mcsrr0 0x23a /* machine check save/restore register 0 */
+#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
+#define mcsr 0x23c /* machine check status register */
+#endif
+#define inv0 0x370 /* instruction cache normal victim 0 */
+#define inv1 0x371 /* instruction cache normal victim 1 */
+#define inv2 0x372 /* instruction cache normal victim 2 */
+#define inv3 0x373 /* instruction cache normal victim 3 */
+#define itv0 0x374 /* instruction cache transient victim 0 */
+#define itv1 0x375 /* instruction cache transient victim 1 */
+#define itv2 0x376 /* instruction cache transient victim 2 */
+#define itv3 0x377 /* instruction cache transient victim 3 */
+#define dnv0 0x390 /* data cache normal victim 0 */
+#define dnv1 0x391 /* data cache normal victim 1 */
+#define dnv2 0x392 /* data cache normal victim 2 */
+#define dnv3 0x393 /* data cache normal victim 3 */
+#define dtv0 0x394 /* data cache transient victim 0 */
+#define dtv1 0x395 /* data cache transient victim 1 */
+#define dtv2 0x396 /* data cache transient victim 2 */
+#define dtv3 0x397 /* data cache transient victim 3 */
+#define dvlim 0x398 /* data cache victim limit */
+#define ivlim 0x399 /* instruction cache victim limit */
+#define rstcfg 0x39b /* reset configuration */
+#define dcdbtrl 0x39c /* data cache debug tag register low */
+#define dcdbtrh 0x39d /* data cache debug tag register high */
+#define icdbtrl 0x39e /* instruction cache debug tag register low */
+#define icdbtrh 0x39f /* instruction cache debug tag register high */
+#define mmucr 0x3b2 /* mmu control register */
+#define ccr0 0x3b3 /* core configuration register 0 */
+#define icdbdr 0x3d3 /* instruction cache debug data register */
+#define dbdr 0x3f3 /* debug data register */
/******************************************************************************
* DCRs & Related
******************************************************************************/
+/*-----------------------------------------------------------------------------
+ | Clocking Controller
+ +----------------------------------------------------------------------------*/
+#define CLOCKING_DCR_BASE 0x0c
+#define clkcfga (CLOCKING_DCR_BASE+0x0)
+#define clkcfgd (CLOCKING_DCR_BASE+0x1)
+
+/* values for clkcfga register - indirect addressing of these regs */
+#define clk_clkukpd 0x0020
+#define clk_pllc 0x0040
+#define clk_plld 0x0060
+#define clk_primad 0x0080
+#define clk_primbd 0x00a0
+#define clk_opbd 0x00c0
+#define clk_perd 0x00e0
+#define clk_mald 0x0100
+#define clk_icfg 0x0140
+
+/* 440gx sdr register definations */
+#define SDR_DCR_BASE 0x0e
+#define sdrcfga (SDR_DCR_BASE+0x0)
+#define sdrcfgd (SDR_DCR_BASE+0x1)
+#define sdr_sdstp0 0x0020 /* */
+#define sdr_sdstp1 0x0021 /* */
+#define sdr_pinstp 0x0040
+#define sdr_sdcs 0x0060
+#define sdr_ecid0 0x0080
+#define sdr_ecid1 0x0081
+#define sdr_ecid2 0x0082
+#define sdr_jtag 0x00c0
+#define sdr_ddrdl 0x00e0
+#define sdr_ebc 0x0100
+#define sdr_uart0 0x0120 /* UART0 Config */
+#define sdr_uart1 0x0121 /* UART1 Config */
+#define sdr_cp440 0x0180
+#define sdr_xcr 0x01c0
+#define sdr_xpllc 0x01c1
+#define sdr_xplld 0x01c2
+#define sdr_srst 0x0200
+#define sdr_slpipe 0x0220
+#define sdr_amp 0x0240
+#define sdr_mirq0 0x0260
+#define sdr_mirq1 0x0261
+#define sdr_maltbl 0x0280
+#define sdr_malrbl 0x02a0
+#define sdr_maltbs 0x02c0
+#define sdr_malrbs 0x02e0
+#define sdr_cust0 0x4000
+#define sdr_sdstp2 0x4001
+#define sdr_cust1 0x4002
+#define sdr_sdstp3 0x4003
+#define sdr_pfc0 0x4100 /* Pin Function 0 */
+#define sdr_pfc1 0x4101 /* Pin Function 1 */
+#define sdr_plbtr 0x4200
+#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+
+
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
#define SDRAM_DCR_BASE 0x10
-#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
-#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
-
- /* values for memcfga register - indirect addressing of these regs */
- #define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
- #define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
- #define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
- #define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
- #define mem_bear 0x0010 /* bus error address reg */
- #define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
- #define mem_mirq_set 0x0012 /* bus master interrupt (set) */
- #define mem_slio 0x0018 /* ddr sdram slave interface options */
- #define mem_cfg0 0x0020 /* ddr sdram options 0 */
- #define mem_cfg1 0x0021 /* ddr sdram options 1 */
- #define mem_devopt 0x0022 /* ddr sdram device options */
- #define mem_mcsts 0x0024 /* memory controller status */
- #define mem_rtr 0x0030 /* refresh timer register */
- #define mem_pmit 0x0034 /* power management idle timer */
- #define mem_uabba 0x0038 /* plb UABus base address */
- #define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
- #define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
- #define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
- #define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
- #define mem_tr0 0x0080 /* sdram timing register 0 */
- #define mem_tr1 0x0081 /* sdram timing register 1 */
- #define mem_clktr 0x0082 /* ddr clock timing register */
- #define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
- #define mem_dlycal 0x0084 /* delay line calibration register */
- #define mem_eccesr 0x0098 /* ECC error status */
+#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
+#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
+
+/* values for memcfga register - indirect addressing of these regs */
+#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
+#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
+#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
+#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
+#define mem_bear 0x0010 /* bus error address reg */
+#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
+#define mem_mirq_set 0x0012 /* bus master interrupt (set) */
+#define mem_slio 0x0018 /* ddr sdram slave interface options */
+#define mem_cfg0 0x0020 /* ddr sdram options 0 */
+#define mem_cfg1 0x0021 /* ddr sdram options 1 */
+#define mem_devopt 0x0022 /* ddr sdram device options */
+#define mem_mcsts 0x0024 /* memory controller status */
+#define mem_rtr 0x0030 /* refresh timer register */
+#define mem_pmit 0x0034 /* power management idle timer */
+#define mem_uabba 0x0038 /* plb UABus base address */
+#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
+#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
+#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
+#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
+#define mem_tr0 0x0080 /* sdram timing register 0 */
+#define mem_tr1 0x0081 /* sdram timing register 1 */
+#define mem_clktr 0x0082 /* ddr clock timing register */
+#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
+#define mem_dlycal 0x0084 /* delay line calibration register */
+#define mem_eccesr 0x0098 /* ECC error status */
/*-----------------------------------------------------------------------------
| Extrnal Bus Controller
#define EBC_DCR_BASE 0x12
#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */
#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */
- /* values for ebccfga register - indirect addressing of these regs */
- #define pb0cr 0x00 /* periph bank 0 config reg */
- #define pb1cr 0x01 /* periph bank 1 config reg */
- #define pb2cr 0x02 /* periph bank 2 config reg */
- #define pb3cr 0x03 /* periph bank 3 config reg */
- #define pb4cr 0x04 /* periph bank 4 config reg */
- #define pb5cr 0x05 /* periph bank 5 config reg */
- #define pb6cr 0x06 /* periph bank 6 config reg */
- #define pb7cr 0x07 /* periph bank 7 config reg */
- #define pb0ap 0x10 /* periph bank 0 access parameters */
- #define pb1ap 0x11 /* periph bank 1 access parameters */
- #define pb2ap 0x12 /* periph bank 2 access parameters */
- #define pb3ap 0x13 /* periph bank 3 access parameters */
- #define pb4ap 0x14 /* periph bank 4 access parameters */
- #define pb5ap 0x15 /* periph bank 5 access parameters */
- #define pb6ap 0x16 /* periph bank 6 access parameters */
- #define pb7ap 0x17 /* periph bank 7 access parameters */
- #define pbear 0x20 /* periph bus error addr reg */
- #define pbesr 0x21 /* periph bus error status reg */
- #define xbcfg 0x23 /* external bus configuration reg */
- #define xbcid 0x23 /* external bus core id reg */
+/* values for ebccfga register - indirect addressing of these regs */
+#define pb0cr 0x00 /* periph bank 0 config reg */
+#define pb1cr 0x01 /* periph bank 1 config reg */
+#define pb2cr 0x02 /* periph bank 2 config reg */
+#define pb3cr 0x03 /* periph bank 3 config reg */
+#define pb4cr 0x04 /* periph bank 4 config reg */
+#define pb5cr 0x05 /* periph bank 5 config reg */
+#define pb6cr 0x06 /* periph bank 6 config reg */
+#define pb7cr 0x07 /* periph bank 7 config reg */
+#define pb0ap 0x10 /* periph bank 0 access parameters */
+#define pb1ap 0x11 /* periph bank 1 access parameters */
+#define pb2ap 0x12 /* periph bank 2 access parameters */
+#define pb3ap 0x13 /* periph bank 3 access parameters */
+#define pb4ap 0x14 /* periph bank 4 access parameters */
+#define pb5ap 0x15 /* periph bank 5 access parameters */
+#define pb6ap 0x16 /* periph bank 6 access parameters */
+#define pb7ap 0x17 /* periph bank 7 access parameters */
+#define pbear 0x20 /* periph bus error addr reg */
+#define pbesr 0x21 /* periph bus error status reg */
+#define xbcfg 0x23 /* external bus configuration reg */
+#define xbcid 0x23 /* external bus core id reg */
/*-----------------------------------------------------------------------------
| Internal SRAM
+----------------------------------------------------------------------------*/
#define ISRAM0_DCR_BASE 0x020
-#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
-#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
-#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
-#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
+#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
+#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
+#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
+#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
+#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
+#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
+#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
+#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
+#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
+#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
+#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
+
+/*-----------------------------------------------------------------------------
+ | L2 Cache
+ +----------------------------------------------------------------------------*/
+#if defined (CONFIG_440_GX)
+#define L2_CACHE_BASE 0x030
+#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
+#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
+#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
+#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
+#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
+#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
+#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
+#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
+
+#endif /* CONFIG_440_GX */
/*-----------------------------------------------------------------------------
| On-Chip Buses
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
#define CNTRL_DCR_BASE 0x0b0
-
-#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
-#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
-#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
+#if defined (CONFIG_440_GX)
+#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
+#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
+#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
+#else
+#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
+#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
+#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
+#endif
#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
#define cpc0_strp2 (CNTRL_DCR_BASE+0x36) /* Power-on config reg 2 (RO) */
#define cpc0_strp3 (CNTRL_DCR_BASE+0x37) /* Power-on config reg 3 (RO) */
-#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
-#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
+#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
+#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
/*-----------------------------------------------------------------------------
| Universal interrupt controller
+----------------------------------------------------------------------------*/
#define UIC0_DCR_BASE 0xc0
-#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
+#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
+#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
+#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
+#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
+#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
+#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
+#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
+#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
#define UIC1_DCR_BASE 0xd0
-#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
+#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
+#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
+#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
+#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
+#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
+#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
+#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+
+#if defined(CONFIG_440_GX)
+#define UIC2_DCR_BASE 0x210
+#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
+#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
+#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
+#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
+#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
+#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
+#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
+#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
+
+
+#define UIC_DCR_BASE 0x200
+#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */
+#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */
+#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */
+#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */
+#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */
+#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
+#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
+#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
+#endif /* CONFIG_440_GX */
/* The following is for compatibility with 405 code */
#define uicsr uic0sr
| DMA
+----------------------------------------------------------------------------*/
#define DMA_DCR_BASE 0x100
-#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
-#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
-#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
-#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */
-#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */
-#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */
+#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
+#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
+#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
+#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */
+#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */
+#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */
#define dmasgh0 (DMA_DCR_BASE+0x06) /* DMA scatter/gather desc addr high 0 */
#define dmasgl0 (DMA_DCR_BASE+0x07) /* DMA scatter/gather desc addr low 0 */
-#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
-#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
-#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */
-#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */
-#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */
-#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */
+#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
+#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
+#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */
+#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */
+#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */
+#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */
#define dmasgh1 (DMA_DCR_BASE+0x0e) /* DMA scatter/gather desc addr high 1 */
#define dmasgl1 (DMA_DCR_BASE+0x0f) /* DMA scatter/gather desc addr low 1 */
-#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
-#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
-#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */
-#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */
-#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */
-#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */
+#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
+#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
+#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */
+#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */
+#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */
+#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */
#define dmasgh2 (DMA_DCR_BASE+0x16) /* DMA scatter/gather desc addr high 2 */
#define dmasgl2 (DMA_DCR_BASE+0x17) /* DMA scatter/gather desc addr low 2 */
-#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
-#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */
-#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */
-#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */
-#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */
-#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */
+#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
+#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */
+#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */
+#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */
+#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */
+#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */
#define dmasgh3 (DMA_DCR_BASE+0x1e) /* DMA scatter/gather desc addr high 2 */
#define dmasgl3 (DMA_DCR_BASE+0x1f) /* DMA scatter/gather desc addr low 2 */
-#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
-#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
-#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */
-#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */
+#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
+#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
+#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */
+#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */
/*-----------------------------------------------------------------------------
| Memory Access Layer
+----------------------------------------------------------------------------*/
#define MAL_DCR_BASE 0x180
-#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
-#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
-#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
-#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
-#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
+#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
+#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
+#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
+#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
+#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
-#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
-#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */
-#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */
-#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
+#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
+#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */
+#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */
+#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
-#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
-#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */
-#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
+#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
+#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */
+#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
+#if defined(CONFIG_440_GX)
+#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
+#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
+#endif /* CONFIG_440_GX */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+#if defined(CONFIG_440_GX)
+#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */
+#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */
+#endif /* CONFIG_440_GX */
+#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
+#if defined(CONFIG_440_GX)
+#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
+#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
+#endif /* CONFIG_440_GX */
+
/*---------------------------------------------------------------------------+
| Universal interrupt controller 0 interrupts (UIC0)
+---------------------------------------------------------------------------*/
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_RSVD0 0x00008000 /* Reserved */
-#define UIC_RSVD1 0x00004000 /* Reserved */
-#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
-#define UIC_EIR0 0x00000100 /* External interrupt 0 */
-#define UIC_EIR1 0x00000080 /* External interrupt 1 */
-#define UIC_EIR2 0x00000040 /* External interrupt 2 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_EIR5 0x00000008 /* External interrupt 5 */
-#define UIC_EIR6 0x00000004 /* External interrupt 6 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI inbound message */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
+#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
+#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
+#define UIC_MTE 0x00200000 /* MAL TXEOB */
+#define UIC_MRE 0x00100000 /* MAL RXEOB */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_RSVD0 0x00008000 /* Reserved */
+#define UIC_RSVD1 0x00004000 /* Reserved */
+#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
+#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
+#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
+#define UIC_EIR0 0x00000100 /* External interrupt 0 */
+#define UIC_EIR1 0x00000080 /* External interrupt 1 */
+#define UIC_EIR2 0x00000040 /* External interrupt 2 */
+#define UIC_EIR3 0x00000020 /* External interrupt 3 */
+#define UIC_EIR4 0x00000010 /* External interrupt 4 */
+#define UIC_EIR5 0x00000008 /* External interrupt 5 */
+#define UIC_EIR6 0x00000004 /* External interrupt 6 */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
/* For compatibility with 405 code */
-#define UIC_MAL_TXEOB UIC_MTE
-#define UIC_MAL_RXEOB UIC_MRE
+#define UIC_MAL_TXEOB UIC_MTE
+#define UIC_MAL_RXEOB UIC_MRE
/*---------------------------------------------------------------------------+
| Universal interrupt controller 1 interrupts (UIC1)
+---------------------------------------------------------------------------*/
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
-#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
-#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
-#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
-#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
-#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
-#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
-#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
-#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
-#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
-#define UIC_PPMI 0x00004000 /* PPM interrupt status */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR10 0x00000400 /* External interrupt 10 */
-#define UIC_EIR11 0x00000200 /* External interrupt 11 */
-#define UIC_EIR12 0x00000100 /* External interrupt 12 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_RSVD2 0x00000040 /* Reserved */
-#define UIC_RSVD3 0x00000020 /* Reserved */
-#define UIC_PAE 0x00000010 /* PCI asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Ethernet 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
+#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
+#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
+#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
+#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
+#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
+#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
+#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
+#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
+#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
+#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
+#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
+#define UIC_PPMI 0x00004000 /* PPM interrupt status */
+#define UIC_EIR7 0x00002000 /* External interrupt 7 */
+#define UIC_EIR8 0x00001000 /* External interrupt 8 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_EIR10 0x00000400 /* External interrupt 10 */
+#define UIC_EIR11 0x00000200 /* External interrupt 11 */
+#define UIC_EIR12 0x00000100 /* External interrupt 12 */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_RSVD2 0x00000040 /* Reserved */
+#define UIC_RSVD3 0x00000020 /* Reserved */
+#define UIC_PAE 0x00000010 /* PCI asynchronous error */
+#define UIC_ETH0 0x00000008 /* Ethernet 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_ETH1 0x00000002 /* Ethernet 1 */
+#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
/* For compatibility with 405 code */
-#define UIC_MAL_SERR UIC_MS
-#define UIC_MAL_TXDE UIC_MTDE
-#define UIC_MAL_RXDE UIC_MRDE
-#define UIC_ENET UIC_ETH0
+#define UIC_MAL_SERR UIC_MS
+#define UIC_MAL_TXDE UIC_MTDE
+#define UIC_MAL_RXDE UIC_MRDE
+#define UIC_ENET UIC_ETH0
+
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller 2 interrupts (UIC2)
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440_GX)
+#define UIC_ETH2 0x80000000 /* Ethernet 2 */
+#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
+#define UIC_ETH3 0x20000000 /* Ethernet 3 */
+#define UIC_EWU3 0x10000000 /* Ethernet 3 wakeup */
+#define UIC_TAH0 0x08000000 /* TAH 0 */
+#define UIC_TAH1 0x04000000 /* TAH 1 */
+#define UIC_IMUOBFQ 0x02000000 /* IMU outbound free queue */
+#define UIC_IMUIBPQ 0x01000000 /* IMU inbound post queue */
+#define UIC_IMUIRQDB 0x00800000 /* IMU irq doorbell */
+#define UIC_IMUIBDB 0x00400000 /* IMU inbound doorbell */
+#define UIC_IMUMSG0 0x00200000 /* IMU inbound message 0 */
+#define UIC_IMUMSG1 0x00100000 /* IMU inbound message 1 */
+#define UIC_IMUTO 0x00080000 /* IMU timeout */
+#define UIC_MSI12 0x00040000 /* PCI MSI level 12 */
+#define UIC_MSI13 0x00020000 /* PCI MSI level 13 */
+#define UIC_MSI14 0x00010000 /* PCI MSI level 14 */
+#define UIC_MSI15 0x00008000 /* PCI MSI level 15 */
+#define UIC_EIR13 0x00004000 /* External interrupt 13 */
+#define UIC_EIR14 0x00002000 /* External interrupt 14 */
+#define UIC_EIR15 0x00001000 /* External interrupt 15 */
+#define UIC_EIR16 0x00000800 /* External interrupt 16 */
+#define UIC_EIR17 0x00000400 /* External interrupt 17 */
+#define UIC_PCIVPD 0x00000200 /* PCI VPD */
+#define UIC_L2C 0x00000100 /* L2 Cache */
+#define UIC_ETH2PCS 0x00000080 /* Ethernet 2 PCS */
+#define UIC_ETH3PCS 0x00000040 /* Ethernet 3 PCS */
+#define UIC_RSVD26 0x00000020 /* Reserved */
+#define UIC_RSVD27 0x00000010 /* Reserved */
+#define UIC_RSVD28 0x00000008 /* Reserved */
+#define UIC_RSVD29 0x00000004 /* Reserved */
+#define UIC_RSVD30 0x00000002 /* Reserved */
+#define UIC_RSVD31 0x00000001 /* Reserved */
+#endif /* CONFIG_440_GX */
+
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller Base 0 interrupts (UICB0)
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440_GX)
+#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
+#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x10000000 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
+ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+#endif /* CONFIG_440_GX */
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
-#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
-#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
-#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
-#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
-#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
-#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
-#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
-#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
-#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
-#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
-#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
+#if !defined (CONFIG_440_GX)
+#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
+#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
+#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
+#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
+#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
+#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
+#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
+#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
+#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
+#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
+#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
+#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
+#else /* !CONFIG_440_GX */
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
+#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
+#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
+#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+#endif /* CONFIG_440_GX */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
-#define IICMDBUF 0x00
-#define IICSDBUF 0x02
-#define IICLMADR 0x04
-#define IICHMADR 0x05
-#define IICCNTL 0x06
-#define IICMDCNTL 0x07
-#define IICSTS 0x08
-#define IICEXTSTS 0x09
-#define IICLSADR 0x0A
-#define IICHSADR 0x0B
-#define IICCLKDIV 0x0C
-#define IICINTRMSK 0x0D
-#define IICXFRCNT 0x0E
-#define IICXTCNTLSS 0x0F
-#define IICDIRECTCNTL 0x10
+#define IICMDBUF 0x00
+#define IICSDBUF 0x02
+#define IICLMADR 0x04
+#define IICHMADR 0x05
+#define IICCNTL 0x06
+#define IICMDCNTL 0x07
+#define IICSTS 0x08
+#define IICEXTSTS 0x09
+#define IICLSADR 0x0A
+#define IICHSADR 0x0B
+#define IICCLKDIV 0x0C
+#define IICINTRMSK 0x0D
+#define IICXFRCNT 0x0E
+#define IICXTCNTLSS 0x0F
+#define IICDIRECTCNTL 0x10
/*-----------------------------------------------------------------------------
| UART Register Offsets
'----------------------------------------------------------------------------*/
#define DATA_REG 0x00
-#define DL_LSB 0x00
-#define DL_MSB 0x01
-#define INT_ENABLE 0x01
-#define FIFO_CONTROL 0x02
-#define LINE_CONTROL 0x03
-#define MODEM_CONTROL 0x04
-#define LINE_STATUS 0x05
-#define MODEM_STATUS 0x06
-#define SCRATCH 0x07
+#define DL_LSB 0x00
+#define DL_MSB 0x01
+#define INT_ENABLE 0x01
+#define FIFO_CONTROL 0x02
+#define LINE_CONTROL 0x03
+#define MODEM_CONTROL 0x04
+#define LINE_STATUS 0x05
+#define MODEM_STATUS 0x06
+#define SCRATCH 0x07
/*-----------------------------------------------------------------------------
| PCI Internal Registers et. al. (accessed via plb)
#define PCIX0_MINGNT (PCIX0_CFGBASE + PCI_MIN_GNT )
#define PCIX0_MAXLTNCY (PCIX0_CFGBASE + PCI_MAX_LAT )
-#define PCIX0_BRDGOPT1 (PCIX0_CFGBASE + 0x0040)
-#define PCIX0_BRDGOPT2 (PCIX0_CFGBASE + 0x0044)
+#define PCIX0_BRDGOPT1 (PCIX0_CFGBASE + 0x0040)
+#define PCIX0_BRDGOPT2 (PCIX0_CFGBASE + 0x0044)
#define PCIX0_POM0LAL (PCIX0_CFGBASE + 0x0068)
#define PCIX0_POM0LAH (PCIX0_CFGBASE + 0x006c)
#define PCIX0_PIM2LAL (PCIX0_CFGBASE + 0x00b4)
#define PCIX0_PIM2LAH (PCIX0_CFGBASE + 0x00b8)
-#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
+#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
/*
* Macros for accessing the indirect EBC registers
#define mtsdram(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
#define mfsdram(reg, data) mtdcr(memcfga,reg);data = mfdcr(memcfgd)
+/*
+ * Macros for accessing the indirect clocking controller registers
+ */
+#define mtclk(reg, data) mtdcr(clkcfga,reg);mtdcr(clkcfgd,data)
+#define mfclk(reg, data) mtdcr(clkcfga,reg);data = mfdcr(clkcfgd)
+
+/*
+ * Macros for accessing the sdr controller registers
+ */
+#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
+#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+
#ifndef __ASSEMBLY__
unsigned long pllFbkDiv;
unsigned long pllOpbDiv;
unsigned long pllExtBusDiv;
- unsigned long freqVCOMhz; /* in MHz */
+ unsigned long freqVCOMhz; /* in MHz */
unsigned long freqProcessor;
unsigned long freqPLB;
unsigned long freqOPB;
unsigned long freqEPB;
} PPC440_SYS_INFO;
-#endif /* _ASMLANGUAGE */
+#endif /* _ASMLANGUAGE */
#define RESET_VECTOR 0xfffffffc
#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache
#endif
#if defined(CFG_GT_6426x) || defined(CONFIG_PN62) || defined(CONFIG_PPCHAMELEONEVB) || \
- defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS)
+ defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || defined(CONFIG_440_GX)
/* handle the 2nd ethernet address */
s = getenv ("eth1addr");
s = (*e) ? e + 1 : e;
}
#endif
-#if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS)
+#if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || \
+ defined(CONFIG_440_GX)
/* handle the 3rd ethernet address */
s = getenv ("eth2addr");
-
+#if defined(CONFIG_XPEDITE1K)
+ if (s == NULL)
+ board_get_enetaddr(bd->bi_enet2addr);
+ else
+#endif
for (i = 0; i < 6; ++i) {
bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
}
#endif
+#if defined(CONFIG_440_GX)
+ /* handle 4th ethernet address */
+ s = getenv("eth3addr");
+#if defined(CONFIG_XPEDITE1K)
+ if (s == NULL)
+ board_get_enetaddr(bd->bi_enet3addr);
+ else
+#endif
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
#if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
defined(CONFIG_CCM)
extern int pcnet_initialize(bd_t*);
extern int plb2800_eth_initialize(bd_t*);
extern int ppc_4xx_eth_initialize(bd_t *);
+extern int ppc_440x_eth_initialize(bd_t *);
extern int rtl8139_initialize(bd_t*);
extern int scc_initialize(bd_t*);
extern int skge_initialize(bd_t*);
#ifdef CONFIG_DB64460
mv6446x_eth_initialize(bis);
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || ( defined(CONFIG_440) && !defined(CONFIG_NET_MULTI) )
ppc_4xx_eth_initialize(bis);
#endif
+#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
+ ppc_440x_eth_initialize(bis);
+#endif
#ifdef CONFIG_INCA_IP_SWITCH
inca_switch_initialize(bis);
#endif
projects / u-boot / commitdiff