#define pr_fmt(fmt) "tegra-pcie: " fmt
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <malloc.h>
#include <pci.h>
+#include <power-domain.h>
+#include <reset.h>
#include <asm/io.h>
#include <asm/gpio.h>
+#include <linux/list.h>
+
+#ifndef CONFIG_TEGRA186
#include <asm/arch/clock.h>
#include <asm/arch/powergate.h>
#include <asm/arch-tegra/xusb-padctl.h>
-
-#include <linux/list.h>
-
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#endif
+
+/*
+ * FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that
+ * should not be present. These are needed because newer Tegra SoCs support
+ * only the standard clock/reset APIs, whereas older Tegra SoCs support only
+ * a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be
+ * fixed to implement the standard APIs, and all drivers converted to solely
+ * use the new standard APIs, with no ifdefs.
+ */
DECLARE_GLOBAL_DATA_PTR;
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_222 (0x1 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_X4_X1 (0x1 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_401 (0x0 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_211 (0x1 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_111 (0x2 << 20)
#define AFI_FUSE 0x104
#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2)
#define AFI_PEX0_CTRL 0x110
#define AFI_PEX1_CTRL 0x118
#define AFI_PEX2_CTRL 0x128
+#define AFI_PEX2_CTRL_T186 0x19c
#define AFI_PEX_CTRL_RST (1 << 0)
#define AFI_PEX_CTRL_CLKREQ_EN (1 << 1)
#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
TEGRA30_PCIE,
TEGRA124_PCIE,
TEGRA210_PCIE,
+ TEGRA186_PCIE,
};
struct tegra_pcie_port {
unsigned int num_ports;
unsigned long pads_pll_ctl;
unsigned long tx_ref_sel;
+ unsigned long afi_pex2_ctrl;
u32 pads_refclk_cfg0;
u32 pads_refclk_cfg1;
bool has_pex_clkreq_en;
unsigned long xbar;
const struct tegra_pcie_soc *soc;
+
+#ifdef CONFIG_TEGRA186
+ struct clk clk_afi;
+ struct clk clk_pex;
+ struct reset_ctl reset_afi;
+ struct reset_ctl reset_pex;
+ struct reset_ctl reset_pcie_x;
+ struct power_domain pwrdom;
+#else
struct tegra_xusb_phy *phy;
+#endif
};
static void afi_writel(struct tegra_pcie *pcie, unsigned long value,
writel(value, pcie->pads.start + offset);
}
+#ifndef CONFIG_TEGRA186
static unsigned long pads_readl(struct tegra_pcie *pcie, unsigned long offset)
{
return readl(pcie->pads.start + offset);
}
+#endif
static unsigned long rp_readl(struct tegra_pcie_port *port,
unsigned long offset)
return 0;
}
break;
+ case TEGRA186_PCIE:
+ switch (lanes) {
+ case 0x0010004:
+ debug("x4 x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_401;
+ return 0;
+
+ case 0x0010102:
+ debug("x2 x1 x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_211;
+ return 0;
+
+ case 0x0010101:
+ debug("x1 x1 x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_111;
+ return 0;
+ }
+ break;
default:
break;
}
return err;
}
+#ifndef CONFIG_TEGRA186
pcie->phy = tegra_xusb_phy_get(TEGRA_XUSB_PADCTL_PCIE);
if (pcie->phy) {
err = tegra_xusb_phy_prepare(pcie->phy);
return err;
}
}
+#endif
fdt_for_each_subnode(fdt, subnode, node) {
unsigned int index = 0, num_lanes = 0;
return 0;
}
+#ifdef CONFIG_TEGRA186
+static int tegra_pcie_power_on(struct tegra_pcie *pcie)
+{
+ int ret;
+
+ ret = power_domain_on(&pcie->pwrdom);
+ if (ret) {
+ error("power_domain_on() failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(&pcie->clk_afi);
+ if (ret) {
+ error("clk_enable(afi) failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(&pcie->clk_pex);
+ if (ret) {
+ error("clk_enable(pex) failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_deassert(&pcie->reset_afi);
+ if (ret) {
+ error("reset_deassert(afi) failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_deassert(&pcie->reset_pex);
+ if (ret) {
+ error("reset_deassert(pex) failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+#else
static int tegra_pcie_power_on(struct tegra_pcie *pcie)
{
const struct tegra_pcie_soc *soc = pcie->soc;
return 0;
}
+#endif
static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
{
u32 value;
int err;
+#ifdef CONFIG_TEGRA186
+ {
+#else
if (pcie->phy) {
+#endif
value = afi_readl(pcie, AFI_PLLE_CONTROL);
value &= ~AFI_PLLE_CONTROL_BYPASS_PADS2PLLE_CONTROL;
value |= AFI_PLLE_CONTROL_PADS2PLLE_CONTROL_EN;
afi_writel(pcie, value, AFI_FUSE);
+#ifndef CONFIG_TEGRA186
if (pcie->phy)
err = tegra_xusb_phy_enable(pcie->phy);
else
error("failed to power on PHY: %d\n", err);
return err;
}
+#endif
/* take the PCIEXCLK logic out of reset */
+#ifdef CONFIG_TEGRA186
+ err = reset_deassert(&pcie->reset_pcie_x);
+ if (err) {
+ error("reset_deassert(pcie_x) failed: %d\n", err);
+ return err;
+ }
+#else
reset_set_enable(PERIPH_ID_PCIEXCLK, 0);
+#endif
/* finally enable PCIe */
value = afi_readl(pcie, AFI_CONFIGURATION);
break;
case 2:
- ret = AFI_PEX2_CTRL;
+ ret = port->pcie->soc->afi_pex2_ctrl;
break;
}
.num_ports = 3,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+ .afi_pex2_ctrl = AFI_PEX2_CTRL,
.pads_refclk_cfg0 = 0xfa5cfa5c,
.pads_refclk_cfg1 = 0xfa5cfa5c,
.has_pex_clkreq_en = true,
.has_cml_clk = true,
.has_gen2 = true,
.force_pca_enable = true,
- }
+ },
+ [TEGRA186_PCIE] = {
+ .num_ports = 3,
+ .afi_pex2_ctrl = AFI_PEX2_CTRL_T186,
+ .pads_refclk_cfg0 = 0x80b880b8,
+ .pads_refclk_cfg1 = 0x000480b8,
+ .has_pex_clkreq_en = true,
+ .has_pex_bias_ctrl = true,
+ .has_gen2 = true,
+ },
};
static int pci_tegra_ofdata_to_platdata(struct udevice *dev)
struct tegra_pcie *pcie = dev_get_priv(dev);
int err;
+#ifdef CONFIG_TEGRA186
+ err = clk_get_by_name(dev, "afi", &pcie->clk_afi);
+ if (err) {
+ debug("clk_get_by_name(afi) failed: %d\n", err);
+ return err;
+ }
+
+ err = clk_get_by_name(dev, "pex", &pcie->clk_pex);
+ if (err) {
+ debug("clk_get_by_name(pex) failed: %d\n", err);
+ return err;
+ }
+
+ err = reset_get_by_name(dev, "afi", &pcie->reset_afi);
+ if (err) {
+ debug("reset_get_by_name(afi) failed: %d\n", err);
+ return err;
+ }
+
+ err = reset_get_by_name(dev, "pex", &pcie->reset_pex);
+ if (err) {
+ debug("reset_get_by_name(pex) failed: %d\n", err);
+ return err;
+ }
+
+ err = reset_get_by_name(dev, "pcie_x", &pcie->reset_pcie_x);
+ if (err) {
+ debug("reset_get_by_name(pcie_x) failed: %d\n", err);
+ return err;
+ }
+
+ err = power_domain_get(dev, &pcie->pwrdom);
+ if (err) {
+ debug("power_domain_get() failed: %d\n", err);
+ return err;
+ }
+#endif
+
err = tegra_pcie_power_on(pcie);
if (err < 0) {
error("failed to power on");
{ .compatible = "nvidia,tegra30-pcie", .data = TEGRA30_PCIE },
{ .compatible = "nvidia,tegra124-pcie", .data = TEGRA124_PCIE },
{ .compatible = "nvidia,tegra210-pcie", .data = TEGRA210_PCIE },
+ { .compatible = "nvidia,tegra186-pcie", .data = TEGRA186_PCIE },
{ }
};